We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,590 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Verticla travel (W-axis): 250 mm Drill capacity in steel: 10 mm Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: HEIDENHAIN Rotary table diameter: 300 mm Drill chuck Boring head Microscope Centering divice with dial indicator Set of collets Lamp
used
Vertical Turning Machine Modified with SUPFINA superfinishing device as a polishing machine. Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump pow ...
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 2 columns execution Table: Table length: 1020 mm Table width: 860 mm T-channel width: 14 mm Number of spline: 7 Distance of the T-slots: 100 mm Table load max.: 800 kg Longitudinal travel (X-axis): 900 mm Transversal travel (y-axis): 600 mm Verticla travel (W-axis): 635 mm Feeds: X axis: 5 - 2500 mm/min Y axis: 5 - 2500 mm/min W axis: 800 mm/min Passage from grinding motor to table: 750 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Passage between the columns: 950 mm Max. angle with taper grinding: up to: 16 ° up to grinding depth: 44 mm Vertical travel of grinding spindle: up to: 180 mm Travel speeds: stepless from: 0.015 m/min up to: 7.5 m/min Stroke length Z, infinitely adjustable: 125 mm Radiale fine feed U-axis up to: 6 mm Planetary moti ...
used
Machine is not in working condition, and can be used for spare parts only. , Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump power: 1.7 kW Flow ra ...
used
Vertical Turning Machine Modified with SUPFINA superfinishing device as a polishing machine. Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump powe ...
used
Table length: 1240 mm Table width: 550 mm Longitudinal X: 1000 mm Cross Y: 508 mm Vertical Z: 460 mm CNC Brand: Mazatrol CNC Model: Mazatrol M-32 X - Travel: 1000mm Y - Travel: 508mm Z - Travel: 460mm Table Length: 1240mm Table Width: 550mm Table load: 800 Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18,5kW Speeds / ranges: 4000Rpm ATC / revolver: 30 Number of controlled axis:3 Chip conveyor: Yes Coolantsystem:   ...
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: CNC 311 Technical data Table length: 770 mm Table width: 630 mm Table load max.: 500 kg Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 450 mm Verticla travel (W-axis): 500 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Stroke of spindle-nose: 125 mm Max. angle with taper grinding: up to: 16 ° up to grinding depth: 44 mm Alternating stroke mouvement, infinitely adjust. from Vmin.: 0.5 mm/min up to Vmax.: 12000 mm/min Stroke frequency Z: 4 Hz Radiale fine feed U-axis up to: 5.5 mm Planetary motion speeds: c axis stepless from: 5 rpm up to: 250 rpm Possible grinding-spindle speeds: stepless from: 4500 rpm up to: 80000 rpm With air-turbine max.: 160000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 5600 kg Overall dim ...
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 600 mm Spindle speeds: stepless from: 120 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 HP Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1400 mm Width: 1500 mm Height: 2100 mm Various accessories: Tool cabinet Drill chuck Set of drills Set of milling cutters
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Power Mate Technical data 1 column execution Table: Table length: 600 mm Table width: 380 mm Table load max.: 300 kg Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Travel of the vertical slide: 450 mm Passage from grinding motor to table: 485 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Stroke of spindle-nose: 340 mm Max. angle with taper grinding: up to: 16 ° Vertical travel of grinding spindle: stepless from: 1 mm up to: 120 mm Travel speeds: stepless from: 0.5 m/min up to: 6 m/min Stroke speed Z-Axis: from Vmin.: 15 mm/min up to Vmax.: 6000 mm/min Planetary motion speeds: c axis stepless from: 5 rpm up to: 250 rpm Voltage 50 Hz 3x: 400 Volt Total power required: 10.2 HP Machine´s weight about: 4000 kg ...
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 250 mm Drill capacity in steel: 10 mm Taper in spindle: MT Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Feeds: Drill spindle slide: from: 0.015 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: PHILIPS Drill chuck Set of boring head Centering microscop Set of drills Device for laying out
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 250 mm Drill capacity in steel: 10 mm Taper in spindle: MT: 0 Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Feeds: Drill spindle slide: from: 0.015 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: ELESTA Rotary table diameter: (Ref. 0330.2) Ø 300 mm Drill chuck Set of boring head Microscope Centering microscop Centering divice with dial indicator Set of collet ...
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Table load max.: 400 kg Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 590 mm Spindle speeds: stepless from: 60 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.80 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 1200 mm Width: 1150 mm Height: 1650 mm Various accessories: Lamp
used
Magnetic chuck diameter: 0 mm Grinding height: 0 mm Grinding wheel diameter: 0 mm Spindle power: 0 kW CNC Brand: 0 CNC Model: 0 Technical data Rotary table:diameter: 300 mm Grinding height over Magnetic chuck: 95 mm Bell grinding wheel: Diameter: 175 mm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2.2 kW Total installed power: 2.7 kW Machine´s weight about: 540 kg Overall dimensions machine: Length: 1900 mm Width: 1700 mm Height: 1800 mm
used
Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system
new
turning speed range: 1800 U/min drive motor: 14,7 kW tool adaptor: ISO 50 Torque: 780 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Catalog No. : 5750 Type: MCFV 1060 Producer: TAJMAC Made in: 2005 Characteristic: Control system: Fanuc Series 18i-MB5 Length of the working table: 1270 mm Width of the working table: 590 mm Maximum table load (evenly distributed): 1350 kg Maximum rotary speed of the spindle: 12000 1/min X-Axis travels: 1016 mm Y-Axis travels: 610 mm Z-Axis travels: 760 mm Equipment: Rotary table Internal cooling 4th axis Workpiece probe MP12 2022: New spindle Chip conveyor High pressure pump Ball bar 2021: X and Y axis laser compensation 2022: GO spindle - new ball screw on X and Y axis - replacement of the rod for holding tools - new bearings - geometry
used
Description Mossner Record vert. Band saw. The welding machine is defective! Specifications Manufacturer Mossner-Rekord Model SSF-420 Use State
used
Operating hours: 40570 Technical data Rotary table:diameter: 750 mm Max. grinding height: 200 / 235 mm Travel of the fine feed: 300 mm Grinding heads number: 1 Table speeds: stepless from: 7/35 rpm Table load max.: 1000 kg Grinding wheel: Diameter: 470 mm Segments: 8 Dimension of the segments:: 120 x 40 x 80 mm Bell grinding wheel: Spindle speeds:: 24 m/s Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 30 kW Machine´s weight about: 6100 kg Overall dimensions machine: Length: 2800 mm Width: 1300 mm Height: 2400 mm Various accessories: Measuring instrument MARPOSS: E 5
used
Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 600 mm Spindle speeds: stepless from: 120 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 HP Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1400 mm Width: 1500 mm Height: 2100 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: ACU RITE III Rotary table diameter
used
Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Table load max.: 400 kg Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 590 mm Spindle speeds: stepless from: 60 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.80 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 1200 mm Width: 1150 mm Height: 1650 mm Various accessories: Digital readout number of axis:: 3 Manufacturer: PHILIPS Rotary table diameter: 380 mm
used
Vertical machining center make BRIDGEPORT type Interact 412Machine -No: 73440A built in 1988Table size: 840 x 320 mmTravel X: 450 mmTravel Y: 310 mmTravel distance Z: 300 mmMax. Table load: 250 kgSpindle speed: 40 - 4000 rpm.Spindle mount: ISA 40Feed range: 0 - 4.5 / 7.5 m / min.Rapid traverse: 12 m / min.Number of tools in the changer: 12Max. Tool diameter: 75 mmMax. Tool length: 250 mmMax. Tool weight: 6.0 kgTool change time: 8,0 sec.Drive power: 5.5 / 3.7 kWWeight approx: 2,3 tOutside dimensions approx: 1910 x 1850 x 2000 mmWith- Heidenhain TNC 355 CNC control- Vice- several tool holdersused, in working order, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. ...
used
used
Technical data 1 column execution Table length: 595 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Travel of the vertical slide: 500 mm Passage from grinding motor to table: 490 mm Distance from spindle-center to vertical slide: 310 mm Max. grinding diameter: 220 mm with display-plate: 280 mm Max. angle with taper grinding: up to: 12.0 ° Vertical travel of grinding spindle: stepless from: 1 mm up to: 110 mm Travel speeds: stepless up to: 6.0 m/min Planetary motion speeds: c axis stepless up to: 330 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.50 HP Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1500 mm Width: 1300 mm Height: 2200 mm Various accessories: Centering device Slot (key way) grinding device Rotary table diameter with electric motor 3-jaw chuck diameter Digital readout number of axis:: 2 Centering m ...
used
Control: CNC 314 / POSELESTA II / (X, Y, Z, W) Operating hours: 13000 Technical data Table length: 600 mm Table width: 380 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 450 mm Table load max.: 300 kg Drill capacity in steel: 30 mm Taper in spindle: ISO: 30 Stroke of drilling spindle (Z-axis): 140 mm Bore diameter max.: 220 mm Distance table to spindle: 0 - 550 mm Spindle speeds: stepless from: 30 rpm up to: 4000 rpm Feeds: from: 500 mm/min up to: 1000 mm/min Drill spindle slide: number (steps): 4 from: 0.01 mm/r up to: 0.23 mm/r Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3500 kg Overall dimensions machine: Length: 1900 mm Width: 1700 mm Various accessories: Manufacturer: ELESTA Visulesta II
used
Control: REXROTH INDRAMAT System 200 BTV 20 Technical data Max. turning diameter: 200 mm Turret number of tools: 2 x 12 Max. workpiece height: 350 mm Spindle speeds: stepless up to: 8000 rpm Feeds: stepless up to: 5000 mm/min Voltage 50 Hz 3x: 400 Volt Motor power: 20 kW Machine´s weight about: 6000 kg Floor space required: Length: 3000 mm Width: 1700 mm Height: 3350 mm Various accessories: Full splash cabin
used
Technical data Throwing wheel diameter: 200 mm Grinding spindle speeds: 2800 rpm Voltage 50 Hz 3x: 380 Volt Power: 3 kW Machine´s weight about: 400 kg Overall dimensions machine: Length: 800 mm Width: 1000 mm Height: 1750 mm Various accessories: Coolant system Magnetic plate:: 300x150
used
Technical data Table length: 590 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Travel of the vertical slide: 500 mm Passage from grinding motor to table: 480 mm Distance from spindle-center to vertical slide: 310 mm Max. grinding diameter: 180 mm with display-plate: 220 mm Max. angle with taper grinding: up to: 12.0 ° Vertical travel of grinding spindle: stepless from: 3 mm up to: 110 mm Travel speeds: stepless up to: 6.0 m/min Planetary motion speeds: c axis stepless from: 5 rpm up to: 330 rpm Possible grinding-spindle speeds: stepless from: 9000 rpm up to: 80000 rpm With air-turbine max.: 100000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 HP Machine´s weight about: 2800 kg Overall dimensions machine: Length: 1400 mm Width: 1600 mm Height: 2700 mm Various accessories: Tool cabinet Centering device Frequency convertor static ...
used
Operating hours: 5240 Technical data Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 - 7 bar Machine´s weight about: 200 kg Overall dimensions machine: Length: 850 mm Width: 800 mm Height: 1900 mm
used
Operating hours: 1424 Technical data Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 - 7 bar Machine´s weight about: 200 kg Overall dimensions machine: Length: 850 mm Width: 800 mm Height: 1800 mm
used
Control: FANUC 0iMD / 31 Technical data 1 column execution Table length: 600 mm Table width: 380 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Travel of the vertical slide: 450 mm Passage from grinding motor to table: 485 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Stroke of spindle-nose: 340 mm Max. angle with taper grinding: up to: 16 ° Vertical travel of grinding spindle: stepless from: 1 mm up to: 110 mm Travel speeds: stepless from: 0.5 m/min up to: 12 m/min Planetary motion speeds: c axis stepless from: 5 rpm up to: 250 rpm Voltage 50 Hz 3x: 440 / 60 Hz Volt Total power required: 10.2 HP Machine´s weight about: 4000 kg Overall dimensions machine: Length: 2700 mm Width: 1700 mm Height: 2850 mm Various accessories: Mecanic Rotary table diameter Coolant system Measurement system Manufacturer: HEIDENHAIN Grinding motor 45 S Grindin ...
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm
used
Key data: 4000 Fagor, 1100 8055, 1000
Grinding length: 4000 mm Grinding width: 1100 mm Grinding height: 1000 mm Wheel diameter: 500 mm Spindle power: 20 kW CNC Brand: Fagor CNC Model: 8055 X – Travel: 4.000mm Y – Travel: 1.100mm Z – Travel: 1.000mm Table Length: 4.000mm Table Width: 1.000mm Table load: 5.000Kg Feed rate X-Axis: 30.000mm/min. Feed rate Z-Axis: 5.000mm/min. Grinding stone dimensions:500 x 100 x 203 mm Power: 20kW Length: 11.000 mm ...
used
Key data: 5500 Siemens, 650 840 D, 750
Grinding length: 5500 mm Grinding width: 650 mm Grinding height: 750 mm Wheel diameter: 600 mm Spindle power: 115 kW CNC Brand: Siemens CNC Model: 840 D CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO – KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Pendel opperation ( double table) Dresser automatic Table dresser X – Travel: 5.500mm Y – Travel: 650mm Z – Travel: 750mm Table Length: 5.500mm Table Width: 750mm Feed rate X-Axis: 20.000mm/min. Feed rate Z-Axis: 20.000mm/min. Grinding stone dimensions:600 x 300 mm Power ...
used
Key data: 2200 Siemens, 750 Sinumerik 820 GA3, 500
Grinding length: 2200 mm Grinding width: 750 mm Grinding height: 500 mm Wheel diameter: 500 mm Spindle power: 75 kW CNC Brand: Siemens CNC Model: Sinumerik 820 GA3 equipped with table dresser X – Travel: 2.200mm Y – Travel: 750mm Z – Travel: 500mm Table Length: 2.200mm Table Width: 500mm Feed rate X-Axis: 15.000mm/min. Feed rate Z-Axis: 10.000mm/min. Grinding stone dimensions:500 x 240 mm Power: 75kW Speeds: 8000Rpm Coolant system:   ...
used
Grinding length: 1650 mm Grinding width: 810 mm Grinding height: 522 mm Wheel diameter: 355 mm Spindle power: 7 kW CNC Brand: _Unknown / Other CNC Model: AD-1 Over arm construction 0,001 mm program Meehanite cast iron Coolant & Filtration X – Travel: 1.650mm Y – Travel: 810mm Z – Travel: 522mm Table Length: 1.500mm Table Width: 750mm Table load: 2.500kg Feed rate X-Axis: 25.000mm Feed rate Z-Axis: 15.000mm Grinding stone dimensions:355 x 50 x 127 mm Power: 7,5 kW Sp ...
used
Grinding length: 1500 mm Grinding width: 750 mm Grinding height: 650 mm Wheel diameter: 406 mm Spindle power: 15 kW FAVRETTO - MC 130 Surface grinder 1500 x 750 x 650 mm MACH - ID 6284 Make: FAVRETTO Type: MC 130 YOP: 1993 X – Travel 1.500 mm Y – Travel 750 mm Z – Travel 650 mm Table Length 1.500 mm Table Width 750 mm Table load 1.600 kg Grinding stone dimensions 406 x 152,4 x 100 mm Power 15 kW Speeds 1400 Rpm Coolant system Yes Dimensions Length 5.000 mm Width 3.000 mm Height 2.800 mm Weight&nbs ...
used
Grinding length: 520 mm Grinding width: 300 mm Grinding height: 300 mm Wheel diameter: 254 mm Spindle power: 6 kW MACH-id 6050 MAKE Fumagalli Italia TYPE RTA 450 YOP 1991 SPECIFICATIONS X - Travel 520 mm Y - Travel 300 mm Z - Travel 300 mm Table Length 465 mm Table Width 250 mm Table load 200 Kg Feed rate X-Axis 0,03 - 27 mm/min. Feed rate Z-Axis 0,002 - 0,036 mm/min. Grinding stone dimensions 254 x 40 x 76 mm Pow ...
used
Grinding length: 470 mm Grinding width: 171 mm Grinding height: 500 mm Wheel diameter: 200 mm Spindle power: 2 kW MACH-id 6030 MAKE Jones & Shipman TYPE 540 X YOP 1990 SPECIFICATIONS X - Travel 470 mm Y - Travel 171 mm Z - Travel 500 mm Table Length 450 mm Table Width 150 mm Table load 100 Kg Feed rate X-Axis 25.000 mm/min. Grinding stone dimensions 200 x 20 x 31,7 mm Power 1,5 kW Speeds ...
used
Grinding length: 650 mm Grinding width: 230 mm Grinding height: 350 mm Wheel diameter: 225 mm Spindle power: 1 kW MACH-id 5557 MAKE OKAMOTO Japan TYPE ACC 52 EX YOP 1999 SPECIFICATIONS X - Travel 650 mm Y - Travel 230 mm Z - Travel 350 mm Table Length 550 mm Table Width 200 mm Table load 100 Kg Grinding stone dimensions 225 x 20 x 50,8 mm Power 1,5 kW Speeds 2800 Rpm Coolant system yes DIMENSIONS Length ...
used
Grinding length: 560 mm Grinding width: 241 mm Grinding height: 457 mm Wheel diameter: 203 mm Spindle power: 1 kW MACH-id 5406 MAKE Chevalier Taiwan TYPE FSG 818 AD YOP 1999 SPECIFICATIONS X - Travel 560 mm Y - Travel 241 mm Z - Travel 457 mm Table Length 457 mm Table Width 203 mm Table load 100 Kg Feed rate X-Axis 0.001 mm/min. Feed rate Z-Axis 0.001 mm/min. Grinding stone dimensions 203 x 25,4 x 76,2 mm mm Power 1,5 kW Speeds ...
used
Grinding length: 1300 mm Grinding width: 550 mm Grinding height: 560 mm Wheel diameter: 400 mm Spindle power: 7 kW CNC Brand: _Unknown / Other MACH-id 5480 MAKE Blohm TYPE Planomat 612 - ERGOMATIC EASY TOUCH YOP 2001 SPECIFICATIONS X - Travel 1300 mm Y - Travel 550 mm Z - Travel 560 mm Table Length 1200 mm Table Width 600 mm Table load 800 Kg Feed rate X-Axis 4.000 mm/min. Feed rate Z-Axis 4.000 mm/min. Grinding stone dimensions 400 x 127 x 50 mm Power ...
used
Rounds: 180 mm Squares: 0 mm Flats: 0 mm Flats on edge: 00 mm Angles: 0 mm (1) horizontal / (2) vertical: 2 MACH-id 5346 MAKE ROUNDO Sweden TYPE R-6-S YOP 1992 SPECIFICATIONS Horizontal and vertical H + V Shaft Ø 180 mm Power 15 kW Working speed 0-7 mm/min. DIMENSIONS Length 2400 mm Width 2000 mm Height 2000 mm
used
Grinding length: 800 mm Grinding width: 440 mm Grinding height: 500 mm Wheel diameter: 0 mm Spindle power: 7 kW CNC Brand: Fanuc MACH-id 4302 MAKE Okamoto TYPE ACC 64 CA1 YEAR 2009 SPECIFICATIONS Controll FANUC Cylindical / Surface / Other Surface X - Travel 800 mm Y - Travel 440 mm Z - Travel 500 mm Electro magnetic table 600 x 400 mm Work piece weight 1000 Kg Grinding wheel size 405 x 127 x 50 mm kW power on spindle 7.5 kW Spindle speeds / ranges 2800 Rpm Coolant / Filtration / Yes DIMENSIONS Length ...
used
Grinding length: 4000 mm Grinding width: 1100 mm Grinding height: 1000 mm Wheel diameter: 4000 mm Spindle power: 30 kW CNC Brand: Fagor CNC Model: 8055 MACH-id 411 MAKE DANOBAT Spain TYPE RP 4000 YEAR 1987 / 20.. SPECIFICATIONS Controll Fagor 8055 Cylindical / Surface / Other Surface Grinding length 4000 mm X - Travel 1100 mm Y - Travel 1000 mm Electro magnetic table 4000 x 1000 mm Grinding wheel size 500 mm kW power on spindle 30 kW DIMENSIONS Length 11000 mm Width 4100 mm Height 4100 mm
used
Grinding length: 950 mm Grinding width: 440 mm Grinding height: 500 mm Wheel diameter: 0 mm Spindle power: 3000 kW CNC Brand: Fanuc MACH-id 4104 MAKE OKAMOTO Japan TYPE ACC 95 EX YEAR 1998 SPECIFICATIONS Controll FANUC in 2 Axis Cylindical / Surface / Other Surafce grinder X - Travel 950 mm Y - Travel 440 mm Z - Travel 500 mm Electro magnetic table 800 x 400 mm Work piece weight 500 Kg Spindle speeds / ranges 3000 Rpm Coolant / Filtration /Yes DIMENSIONS Length 4870 mm Width 2690 mm Height 2400 mm
used
Vertical band saw make JAESPA type MSP 4Machine -No: 714630, built in 1971for sawing steel, stainless steels, nickel alloysGray, temper, cast steel and similar materialsRoll diameter: 420 mmCutting height: 325 mmProjection (cutting area): 400 mmBandwidth max. : 25 mmcontinuous belt speed: 15 - 300 m / min.Table size: 600 x 600 mmTable left: left 15 ° / right 45 °Band saw blade length: 3200 - 3400 mmDrive power: 1.0 / 1.5 hpWeight: 400 kgExternal dimensions: 920 x 640 x 1850 mmColor greenWith- stepless band saw speed- Bandsaw welder IDEAL BS0 16 mm with scissors- Grindstone- near tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine To ...
used
Vert. Metal band saw machine make JAESPA type MSU 4 CMachine -No: 1060578 Year 1978Roll diameter: 420 mmusable projection or cutting width: 405 mmmax. cutting height: 450 mmTable size: 615 x 615 mmTiltable table: 10/15 °Belt speed continuously up to: 250 m / min.Saw band size: 3640/3625 x 20/3 mmDrive power: 1.0 / 1.5 kWDimensions L x W x H: 900 x 850 x 2000 mmWeight approx: 470 kgWith- Bandsaw Welder Ideal BS 16- chip air compressor- Cutting device for band saw bladesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vertical metal band saw make PEHAKA type USM 4Mash. -No: 3305175/5127Projection: 410 mmCutting height: 300 mmCutting width: 385 mmBandwidth: 3 - 13 mmRoll diameter: 400 mmTable size: 610 x 610 mmTable load: 50 - 80 kgTable tilt: 35 ° R / 12 ° LTape length from: 2900-3040 mmSawing speed: 15-90 / 300-1800 mm / minDimensions: 800 x 1000 x 2150 mmSaw drive: 0.8 / 1.1 kWWeight approx: 400 kgWith- Bandsaw welder IDEAL BS 0-16- Grindstone- tiltable tableused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Honing diameter maximum: 165 mm Honing diameter minimum: 1 mm Stroke length: 400 mm Number of honing heads: 0 MAKE SUNNEN TYPE 1804 YEAR 80 er DIMENSIONS Length 1830 mm Width 1250 mm Height 1700 mm min diameter : 1,5 mm max diameter : 165 mm max. length : 400 mm Speeds : 2500 RPm
used
Vertical band saw make WESPA type MSP 4Mash. -No: 621092for sawing steel, stainless steels, nickel alloysGray, temper, cast steel and similar materialsRoll diameter: 400 mmCutting height: 280 mmProjection (cutting area): 400 mmBandwidth max. : 25 mmstepless belt speed: 0 - 150 m / min.Saw blade size: 2880/2980 x 25 x 0.9 mmOutside dimensions approx: 900 x 700 x 1800 mmWith- Banded butt welder IDEAL BS 25- Grindstone- tiltable tableused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools