vertical turning used for sale

Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "

This 3s SPINNER VC 750 vertical machining centre was manufactured in 2016. It features a Siemens 840D sl control system, a spindle speed of up to 12,000 RPM, and a high-speed double-arm tool changer with 24 tool stations. With low spindle hours and a focus on prototyping applications, consider the opportunity to buy this SPINNER VC 750 vertical machining centre. Contact us for further details.

CNC VERTICAL MACHINING CENTRE Inv. No. 13.039M1 Make MAZAK Model AJV60/80 Control MAZATROL M-32 Year of manufacture 1989 Pallet size 1.250 x 2240 mm X-travel (longitudinal) 2.000 mm Y-travel (cross) 1,400 mm Z-travel (vertical) 508 mm Spindle ISO 50 TOOL CAT 50 Workpiece weight 15 kg R.P.M. 22 – 3.150 kW Volts Cycles Including: Chip conveyor spiral on-side of the table 40 Tool Magazine Auction-ID: A1-45737-8

This 3 axes Wele RB - 212 was manufactured in 2016. It features an impressive X-Axis travel of 2120 mm, Y-Axis travel of 1200 mm, and Z-Axis travel of 800 mm. The machine is equipped with a Heidenhain iTNC 530 CNC system and can support a maximum weight of 3500 kg on its 2000 mm x 1100 mm table. Consider the opportunity to buy this Wele RB - 212 vertical machining center. Contact us for further details.

CNC VERTICAL MACHINING CENTRE Inv. No.13.018M1 Make EUMACH Model MC-800P Control Heidenhain TNC360 Serialnumber 8056 X-travel 760 mm Y-travel 460 mm Z-travel 460 mm Table size 900 x 410 mm Spindle taper ISO 40 R.P.M. 0 – 8.000 kW 15 Volts 400 Cycles 50 Including: Linear guide way Rear splash guard and chip tray. Automatic lubrication. Telescopic way covers. Chip conveyor ATC 24 positions Auction-ID: A1-45737-129

Behr ST 150 Vertical Shaping Machine -Masch.-Nr: 096, -large stroke: 150 / 175 mm -Tilt adjustment of the ram in both directions: 5 / 8 degrees -Height table / UK ram guide: 260 mm -Rotary table diameter: 340 mm -Longitudinal displacement of the table: 320 mm -3 lifting speeds: 17 / 54 / 108 H/min. -Gr. groove width: 16 / 26 mm -External dimensions approx.: 960 x 1530 x 2030 mm with - Feeds in X and Y (back and forth) -Speed adjustable - Adjustment of rotary table manually

Manufacturer: Cincinnati Model: Lamb CFV 1050i Year of Manufacture: 2008 Axis Travel - X-axis: 1,050 mm - Y-axis: 540 mm - Z-axis: 720 mm Control System - Control: Heidenhain iTNC 530 Tool Changer - Automatic tool changer: 30-position Electrical Data - Power supply (3-phase): 208 / 220 / 230 / 240 / 380 / 415 / 460 / 480V - Frequency: 50/60 Hz - Power supply (1-phase): 230V - Frequency: 50/60 Hz - Control voltage: 24V - Capacity: 60 kVA - Current (3-phase): 10 A - Current (1-phase): 17 A Find more here - / Contact us at -

Manufacturer: POS Model: POSmill E1100 Year of Manufacture: 2015 Axis Travel - X-axis: 1,100 mm - Y-axis: 600 mm - Z-axis: 510 mm Control System - Control: Heidenhain iTNC 625 Tool Changer - Automatic tool changer: 40-position Electrical Data - Rated power: 300 kVA - Voltage (3-phase): 400V / 50 Hz - Fuse: 250 A Machine Weight - Net weight: 8,800 kg Find more here - / Contact us at -

VERTICAL MACHINING CENTRE Inv. No.13.107M1 Make MAZAK Model VTC-300C Control Mazatrol Fusion 640M X-travel 1740 mm Y-travel 760 mm Z-travel 660 mm Table size 2000 x 760 mm Spindle taper ISO 40 R.P.M. 40 – 12.000 kW 15/11 Volts 400 Cycles 50 Including: Machine cover Manuals Coolant tank Work light Chip conveyor Auction-ID: A1-45737-167

CNC VERTICAL MACHINING CENTRE Inv. No.13.017M1 Make EUMACH Model MC1300P Control Heidenhain 360 Serialnumber E3045 X-travel 1350 mm Y-travel 610 mm Z-travel 610+160 mm Table size 1500 x 700 mm Max loading weight 1500 kg Spindle taper ISO 50 R.P.M. 60 – 4500 Machine weight 9000 kg Dimensions 4400 x 3076 x 3000 mm kW 15 Volts 400 Cycles 50 Including: Automatic lubrication. Telescopic way covers. ATC 32 positions Auction-ID: A1-45737-128

CNC VERTICAL MACHINING CENTRE Inv. No.13.164M1 Make DMG Model 63V Serial number 28850011162 Control Heidenhain TNC426M Year 2000 X-travel 630 mm Y-travel 500 mm Z-travel 500 mm Table size 500 x 800 mm Spindle taper SK 40 R.P.M. 8000 kW 13 Volts 400 Cycles 50 Including: Linear guide way Rear splash guard and chip tray. Automatic lubrication. Telescopic way covers. Chip conveyor ATC 24 positions Auction-ID: A1-45737-176

Sawing machine only Automatic table Saw grinding function Auction-ID: A3-43519-2189

This 3-axis DMG MORI DMC 650V vertical machining centre was manufactured in 2017. It features a CNC Celos with Siemens 840D, a spindle speed of up to 20,000 rpm, and a tool magazine with 20 SK40 positions. The table measures 960 x 570 mm, and it includes an NC divider Mori Seiki DDRT 200X. If you are looking to get high-quality milling capabilities, consider the DMG MORI DMC 650V machine we have for sale. Contact us for more information.

This 3-axis MIKRON UME600 was manufactured in 1995. It features a maximum spindle speed of 5,000 rpm and a feed rate of up to 10,000 mm/min. The table size is approximately 900 × 530 mm, providing ample workspace for various machining tasks. If you are looking to get high-quality milling capabilities, consider the MIKRON UME600 vertical machining centre we have for sale. Contact us for further details.

- Compact aerial platform for indoor use - Goes straight up + small swing arm (JIB) - Ideal for narrow spaces Typical Specifications (E300 AJP) - Working height: ± 10 – 11 meters - Platform height: ± 8 – 9 meters - Load capacity: ± 200 kg - Drive: electric (battery) - Very manoeuvrable (small turning radius) ️ Usage - Warehouses - Maintenance (lighting, pipes) - Installation - Interior Auction-ID: A3-43519-11417

Reading hours: approx. 67,741 h (machine) / approx. 21,617 h (spindle) Equipped with: 60-fold tool change magazine, (1x) chip conveyor (2017), (1x) cooling/filter unit with pumps and control cabinet, oil mist separator. Auction-ID: A1-45979-2

Maximum tool weight: 7kg, Maximum tool length: 300mm. Equipped with: (1x) 16-way tool changer, (1x) chip conveyor, (1x) cooling/filter unit, (1x) spindle cooler, (1x) external cooling unit. Auction-ID: A1-45979-4

Reading hours: approx. 66.283 h (machine) / approx. 21.312 h (spindle) Equipped with: 60-fold tool change magazine, (1x) chip conveyor (2017), (1x) cooling/filter unit with pumps and control cabinet, oil mist separator. Auction-ID: A1-45979-3

Technical Specifications X-axis travel: 1800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Fast feed rates X - Y - Z: 50 m/min Spindle speed: 10-10000 rpm; 7.5 - 11 kW Random Tool Magazine: 30 Positions Control: FANUC 21i MB Approximate weight: 7500 Kg Accessories: Chip Conveyor Notes: Bulkhead for pendulum work Item sold in unverified status Auction-ID: A1-44614-18

A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible.

Auction-ID: A1-41682-22

EMAG VTC 250 DUO DDYear of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mmTurning length : 700 mm____________Description:In General:Max. workpiece diameter:140 mmChuck diameter:250 mmMax. turning length:700 mmTrack I:Tool carrier I:Tool turret (X/Z)Tool drive:9,600 rpm, 44 NmTool holder:BMTNumber of stations:11 + 1 Part gripperX-axis:310 mmZ-axis:1,115 mmPosition sensors (X/Z):Direct scalesTrack II:Main spindle (OP10):Travelling direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:Collet chuckClamping cylinder:Hydraulic clamping cylinderSupport control:PneumaticW-axis:772 mmC-axis:0.01°Position sensor (W):Direct scale:Sub-spindle (OP20):Direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:2+2-jaw power chuckClamping cylinder:Hydraulic clamping cylinderC-axis:0.01°Track III:Tool Carrier II:Tool turret (X/Y/Z)Tool drive:9,600 rpm, 44 NmToo ...

MAHO M800 CNC Milling Machine Manufacturer: MAHO Model: M800 Type: Vertical CNC Milling Machine with Rotary Table Condition: Used – working overall condition, but uncleaned, with no known malfunctions Year: Not known (estimated: late 1980s – early 1990s) Technical data (as far as known): • Travels: X ≈ 500 mm / Y ≈ 400 mm / Z ≈ 400 mm (estimated, please check) • Rotary table with T-slots • Spindle mount: ISO or SK (please check exact standard) • Control via separate control panel • Coolant connection available • Doors with viewing windows (safety glazing) Auction-ID: 038-WFX-6

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-63

toolchanger positions: 51 Auction-ID: A7-46300-80

In stock on pallet, total dimensions approx. 1200x800x1400 mm Auction-ID: A1-45790-570

Internal number: 69148, with anti-hole protection, fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (retracted): 6.5 cm, climbing ability: 25 %, compact dimensions, almost silent operation, ideal for indoor use Auction-ID: A1-46342-14

Internal number: 69082, with anti-hole protection, fastening for the safety harness, abrasion-resistant solid rubber tires, gradeability: 25%, swivel range: 345°, allows flexible working over obstacles, compact design, almost silent operation and precise control ideal for indoor use Auction-ID: A1-46342-10

This 3-axis Quaser MV 204 II was manufactured in 2000. It features a spindle speed of 10,000 rpm and a CNC control system by Selca 3045 PD. The machine includes a magnetic table measuring 630 mm x 400 mm and a tool magazine with 20 positions. If you are looking to get high-quality milling capabilities, consider the Quaser MV 204 II machine we have for sale. Contact us for more information.

Internal number: 69149, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (retracted): 6.5 cm, climbing ability: 25 %, compact dimensions, almost silent operation, ideal for indoor use Auction-ID: A1-46342-11

This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine.

Wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a mitre guide and is supplied with a saw blade. Roll diameter 400 mm Cutting height 200 mm Cutting width 350 mm Motor power 1.5 kW Table size 400 x 500 mm Table tilt 45 degrees Saw blade length 2950 mm Condition: never used / new (5) Auction-ID: A7-46460-518

This 3-axis Leadwell V-40 was manufactured in 1996. It features a BT40 spindle, a 20-tool automatic tool changer, and a maximum spindle speed of 8,000 rpm. External coolant is provided at 2 bar. If you are looking to get high-quality milling capabilities, consider the Leadwell V-40 machine we have for sale. Contact us for more information about this machine.

Internal number: 69116, with perforated protection, fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (retracted): 6.5 cm, climbing ability: 25 %, compact dimensions, almost silent operation, ideal for indoor use Auction-ID: A1-46342-28

This STAMA MC526 was manufactured in 2008. It features a 40-tool magazine, NC swivel table, chip conveyor, belt filter system, and an internal coolant supply via the spindle. Additional amenities include a high-pressure system, Renishaw probe, and an extraction system. Consider the opportunity to buy this STAMA MC526 vertical machining centre. Contact us for more information.

Internal number: 69080, with anti-hole protection, safety harness release strap, abrasion-resistant solid rubber tires, gradeability: 25%, swivel range: 345°, allows flexible working over obstacles, compact design, almost silent operation and precise control ideal for indoor use Auction-ID: A1-46342-45

This 3-axis MIKRON VCE 600 Pro was manufactured in 2006. It features a Heidenhain controller and an SK40 spindle mount, with a total of 13,869 spindle hours. If you are looking to get high-quality milling capabilities, consider the MIKRON VCE 600 Pro machine we have for sale. Contact us for more information.

Band saw with - Saw blade welding machine - Whetstone - Saw blades - Documentation Roll diameter 440 mm Projection 420 mm Workpiece height 200 mm Cutting speed 20 - 1550 m/min Table clamping area 560 x 560 mm Saw blade length 3250 mm Total power requirement 1.5 kW Machine weight approx. 0.8 t Space requirements approx. 1.2 x 0.8 x 2.1 m Condition: unchecked (6) Auction-ID: A7-46460-470

This 5-axis DMG DMU 100 T was manufactured in 2002. It features a Heidenhain control system and a SK40 taper. Note that the pneumatic cylinder of one of the two tool changers is defective and needs replacement. Consider the opportunity to buy this DMG DMU 100 T vertical machining centre. Contact us for more information about this machine.

Internal number: 69079, with anti-hole protection, fastening for the safety harness, abrasion-resistant solid rubber tires, climbing ability: 25%, swivel range: 345°, allows flexible working over obstacles, compact design, almost silent operation and precise control ideal for indoor use Auction-ID: A1-46342-9

This 3-axis MIKRON VCP 600 vertical machining center was manufactured in 2001. It features a 30-position tool changer, although only 21 positions are currently usable. The high-speed spindle operates at 8,000 rpm due to a slight imbalance. Consider the opportunity to buy this MIKRON VCP 600 vertical machining center. Contact us for more information.

Band saw with - Ideal welding machine - Grinder Roll diameter 420 mm Projection 420 mm Workpiece height 300 mm Table size 610 x 610 mm Saw blade length 3150 - 3260 mm Speed 12 - 750 m/min Machine weight approx. 0.4 t Space requirement approx. 1.2 x 0.8 x 2.0 m Auction-ID: A7-46460-464

This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information.

In working order. Auction-ID: A3-43525-6046

Band saw with - Swivel table - Footswitch - Machine light - IDEAL welding device Roll diameter 500 mm Projection 490 mm Workpiece height 220 mm Table size 600 x 600 mm Saw blade length 3350 mm Speed infinitely variable Machine weight approx. 0.4 t Space requirements approx. 1.2 x 0.8 x 1.95 m Condition: unchecked (6) Auction-ID: A7-46460-443

This 3-axis Hurco VMX 60 was manufactured in 2008. A vertical machining center featuring a MAX Control system, it offers X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 610 mm. It includes a spindle speed of 10,000 rpm, a BT40 spindle taper, and a 24-position tool turret. Consider the opportunity to buy this Hurco VMX 60 vertical machining center. Contact us for more information about this machine.

Type: Vertical band saw Electrical supply: 380V 3F 50 Hz Auction-ID: A7-46477-7

This 3-axis Wele AA1165 was manufactured in 2014. A vertical CNC machining center featuring a Fanuc 0i-MC control, it offers X/Y/Z travels of 1,100 mm, 650 mm, and 600 mm respectively. Rapid feeds reach up to 24 m/min, with a spindle speed of 15,000 rpm. The table supports loads up to 1,100 Kg. Consider the opportunity to buy this Wele AA1165 vertical machining center. Contact us for more information about this machine.

The storage tank is in good condition. Was used for storing diesel with feed pump. The tank has a storage capacity of 2500L. Auction-ID: A3-43525-34002

This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details.