vertical turning lathe used for sale

Control : D.Electron Z 32 Peak height 220 mm Tip width 1000 mm Turning over bed 440 mm Turning diameter via slide 245 mm Travel -Z Axis 750 mm Width of the lathe bed 320 mm Spindle holder CL 6" Spindle bore 62 mm Spindle speeds 0 - 2500 rpm. Rapid speed X/Z 7 m/min Pinien travel by hand 200 mm Pinole diameter 80 mm Pinole holder MK 4

Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions

Control : Heidenhain Peak height 260 mm Tip width 1500 mm Turning over bed 520 mm Turning diameter via slide 310 mm Travel -Z Axle 1250 mm Travel -X-axis 270 mm Width of the lathe bed 400 mm Spindle holder CL 8" Spindle bore 110 mm Spindle speeds 0 - 2000 rpm. Rapid speed X/Z 5 m/min Pinien travel by hand 220 mm Pinole diameter 80 mm Pinole holder MK 5 Total installed power 18 kW (Electronically reduced) Engine hours 1828 h

Ladies and gentlemen, below we offer the following machine for sale: from a tool making, single-layer run and very well maintained. Still under power. CNC lathe Voest - Alpin - Weipert WNE 490 X 1000, peak height 240mm, tip width 1000mm, control Siemens, circulating through mes.over bed 490mm, circulating permes.via plan slide 195mm, crimping 520mm, Spindeldurchmes.im front. Bearing 100mm, spindle bore 63mm, torque 736Nm.

Turning + Thread cutting semi-automatic M32 The machine was never used for production. Suitable for internal and external threads max. diameter 90 mm max. turning length 45 mm max. thread pitch 1.5 mm max. thread length 14 mm Max. Thread pitch multi-speed 3 mm largest thread length multi-speed 21 mm Drive motor approx. 3 hp Machine weight 800 Kg

AUTOMATIC SPINNING LATHE DENN RPE-290 Denn Mod.RPE-290 Automatic Spinning Lathe- Spindle Speeds 615/1060/1825 RPM. More information on request.

Face plate diameter: 4200mm Swing diameter: 4950mm Turning height: 3000mm Ram: 300mm x 300mm (Z-Stroke: 2100mm) Workpiece weight: max. 30t Accessories: PickUp station Control 840D Sl Machine was completely overhauled, machined and rebuilt.

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

Turning machine Tip height 160 mm Tip width 1000 mm 3 speeds Flat disc diameter 190 mm Beitel auflage Power connection 380 volts Dimensions 1460 mm x 900 mm x H 1100 mm

3 re-lathes, see pictures

MAX DIAMETER OF ROD: 100 MM MAX CUTTING DIAMETER: 552 MM MAX TURNING LENGTH: 1.195 MM TURRET: 16 ROTATION SPEED: 2800 RPM CONTROL: FANUC 32 B INCLUDES: AUTOBLOK STEADY SLU-3.1 – ZS CAPACITY: 20-165 MM AUTOMATIC FEEDER FOR BARS BREUNING – MOD. MUK 10016-II

Machine is in good condition. Machine has a semi-spindle and it does not have a chip-federal.

Table diameter 2.000 mm Working diameter 2.000 mm Machine under retrofit/rebuilding to install CNC Mechanical ready, totally rebuilt.

CNC fine lathe Make: PetrolGer Type: TNL Control: Siemens 810T Built: 1991 Equipment and accessories: - Swivel loader system - Small conveyor belt - Charging-unloading gripper - Chip conveyors - Foot lever for clamping and relaxing the collet

MACHINE IS IN GOOD WORKING CONDITION Machine need center horse and support for the clamp cutting tools. Bj0ie7dcoa Machine Has ben used in Switzerland, after thay realize they need that both suports, they took it off and use on other lathe.

CNC Lathe with indexing chuck ( Autoblock) SPINNER TC400 52

CNC Lathe Gildemeister CTX 200 Series 2 Immediately free from location: CNC Lathe Gildemeister Type CTX 200 Series 2 Built in 2001 Operating hours 39,000 CNC Control Heidenhain 4290 TP Turning diameter 210 mm Turning length 305 mm Reiststock revolver 12 driven tools Conveyor Bar loading magazine Max travel plan 160 mm Max travel length 350 mm Spindle speeds up to 5000 rpm 2 simultaneous axes with C axis 1 controlled spindle 12 driven tools Collet pliers with hydr. Hollow clamping device up to 43 mm Workpiece pick-up device up to 56 mm very many tools

Control: Fanuc 32i Rotary memeser 380 mm Main spindle D=65mm Speed 4000 rpm Holding brake C-axis Tool carrier 1 X/ Z axis 220/ 600 mm working distance Tool carrier 1: 14 shots (VDI 30)/ 7 attached Tools Tool carrier 2 X/Z axis 110/650 mm working distance Tool carrier 2: 7 shots (VDI 30) + 3 UniFlex -52 Tool measurement ATC Chip-federals

Machine details Bearing number 1105-03132 Machine type CNC lathe - slantbed machine Made GILDEMEISTER Type CTX 400 Built in 2000 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time SOFORT Freight base from location, free loading truck Technical details Turning diameter 570 mm Turning length 635 mm Control Heidenhain CNC Pilot 4290 Turning diameter over bed slide 420 mm Spindle speeds - infinitely 25-5000 rpm Number of driven tools 6 mm Drive 5 kW Information CNC Heidenhain Pilot 4290 C-axis with 5 FESTE vdi holders 1 3 BAKE FOOD 1 X SPAENEFOERDERER WITH REITSTOCK + LNS STANGEN VORCHUB

Key data: 1435

Turning diameter: 1435 mm Turning length: 0 mm Spindle bore: 0 mm Motor power: 0 HP/kW Fields of application machining of two wheel sets at the same time turning of wheel tyre profiles on wheel sets in situ machining of brake discs on wheel sets in situ machining of single wheel sets machining of coupled wheel sets machining of wheel sets of different gauges on all mainline railway, metro and tram vehicles Rail track gauge:  1.435mm Max. wheel tread Ø:1.400mm Min. wheel tread Ø:500mm Number of slides:  2 + 2  Power:             2 x 30 kW Length:            7.000 mm  Width:             8.000 mm  Height:            2.600 mm  Weight:            32.000 kg  The tandem a ...

Guildmaster CTX 210 2005 Turning diameter: 290mm Turning length: 300mm Orbital diameter over bed: 380mm Main spindle Speed range: 20-6000 min/-1 Max Torque: 79/72Nm max. feed diameter: 165mm Spindle diameter in front bearing: 90mm Rod diameter: max. 45mm C-axis: 0.04° Holding moment: C:112Nm Tool turret: Number of powered tools: 12 pos. Shank diameter: 30mm Speed range: max. 5000 rpm Clamping diameter driven tools: max. 16mm Travel X-axis: 160mm Z-axis: 305mm Riding pole travel: 370mm Feeds: Rapid response: X 20 m/min Rapid response: Z 30 m/min Rapid response: C 100 m/min

Turning diameter 320 mm Turning length 450 mm Control HEIDENHAIN Circulation diameter over slide 260 mm Travel - x 160 mm Travel - z 450 mm Speed range - main spindle 5,000 rpm Drive power - main spindle 11 / 7.5 kW Max Torque 76 / 112 Nm Turret head (x-fold) 12 pos

Inv. Num: 5302 Type: DL 10G Producer: Profika Generated: 2011 Parameters: Control system: FANUC 0iMATE-TD Maximum rotation length: 185 mm Max turning diameter: 170 mm Maximum spindle speed: 3500 rpm Lathe length: 1980 mm Lathe width: 1420 mm Weight: 2750 kg

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

Description CNC lathe from Gildemeister suitable for tooling, fixture construction, training as well as mold making Circulation over bed 400 mm Circulation over flat sleds 225 mm Technical data Type NEF CT 40 12500 hours according to display Circulation over bed 400 mm Circulation over flat loops 225 mm longitudinal path 660 mm spindle bore 68 mm Speed range 25 – 4000 rpm Control EPL 1 Holder VDI 30 12-fold tool disc

- spindle bore: 26 mm - max. spindle speed: 5.000 1/min - turret with 6 stations (not driven) - 2x cross slides - 2x vertical slides - only worked with plastic accessories - barfeeder FMB turbo 3-26 dimensions LxWxH: - machine 1600 x 1220 x 1740 mm - barfeeder 3300 x 700 x 1300 mm weight overall: 1.700 kg

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemei ...

Lathe was bought fully reconditioned from a reseller in 1996 and has been used since 2010. Mechanically is in good conditions, NC is to be checked.

DOOSAN PUMA 400LA 2007 DOOSAN PUMA 400LB 2007

Furnace (heat treatment machine) 650 T max 650 Celsius inner dimensions 1.5x1.5x2m Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel

In line 90? panel turning device (or transport crosswise without turning) Panels entering lengthwise, turning them to crosswise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 mm to 3200 mm The panels are transported on a roller conveyor, they are taken by 2 clamping discs iin order to turn them freely without friction and are placed back on a roller conveyor bringing them to the next machine Consisting of: -First roller conveyor with inclined driven rollers, length 3000 mm and width 1500 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW, additional roller coveyor aside in case of transport without turning -Adjustable fence -Clamping and turning device -Second roller conveyor with inclined driven rollers, length 1500 mm and width 3000 mm, rollers are soft pvc covered, centers 150 mm, feeds ...

In line 90? panel turning device Panels entering crosswise, turning them to lengthwise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 mm to 3200 mm The panels are transported on a roller conveyor, they are taken by 2 clamping discs iin order to turn them freely without friction and are placed back on a roller conveyor bringing them to the next machine Consisting of: -First roller conveyor with inclined driven rollers, length 1500 mm and width 3000 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW -Clamping and turning device -Fixed fence -Second roller conveyor with inclined driven rollers, length 3000 mm and width 1500 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW

Code 71139 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 1500 S/N 30 H / 87 Year 1996 Control Siemens Sinumerik 805 Distance between centers 1500 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 5500 kg Accessories 8 ATC Duplomatic toolholder R 10 Hydraulic 3 chuck Ø 315 mm 1 fixed steady with 320 mm bore 1 open steady cooling equipment Condition Machine is in good condition

Code 81176 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 3000 S/N 30 – S / 80 Year 1995 Control Heidenhain Manual Plus ( 1998 ) Distance between centers 3000 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 6000 kg Accessories 3 chuck of 315 mm 1 fixed steady 1 open steady cooling equipment Condition Machine is in good condition

to turn the cans by 180° for example before and after the pasteurizer/can warmer/can coding suitable for all can types: Standard, Sleek, Slim

Turning diameter: 1250 mm Turning length: 0 mm Spindle bore: 0 mm Motor power: 0 HP/kW CNC Brand: Siemens Rail track gauge   1,435 mm Max. wheel tread Ø    1,250 mm Min. wheel tread  Ø    650 mm in work                                              : 09/2016 Rail Profile                                        : S54 ( retractable rail ) UIC tread patterns                            : 80- 145 mm Max. wheel flange height                 : 45 mm Max. load per wheel            &n ...

description: Second hand crate-turning-stations for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 21 diverse used crate-turning-stations. When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our ...

turning diameter: 890,820 mm turning length: 4000 mm control: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mm cross movement: 500 mm quill stroke: 140 mm tailstock adjustment: 3708 mm spindle turning speed range: 5-1800 U/min milling tool taper: 1500-6000 U/min feed: 0,5-5000 mm/min rapid traverse: 15 m/min feed power: 22000/10000 N Tool changer: 95 St. steady: CNC tail stock: CNC total power requirement: 50/69 kW weight of the machine ca.: 23,5 t dimensions of the machine ca.: 10x4x3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 820 mm Turning length: 2000 mm Spindle bore: 0 mm Motor power: 0 HP/kW MACH-id    5413 MAKE        VDF Boehringer TYPE          DUE 800 YOP            1994 SPECIFICATIONS Centre height          410 mm Grinding  Ø       820 mm Grinding length      2000 mm Grinding stone dimensions        250 x 50 mm Grinding stone speeds        10.000 Rpm Table inclasement         60 ° DIMENSIONS Length        5500 mm Width          2400 mm Height          2200 mm Weight          8000 kg

weight max.: 40 t workpiece diameter: 7000 mm roll diameter - bore: 500 mm Wheel width: 180 mm Distance of shafts: 100-3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 6000 mm gear diameter: 680 mm gear width: 230 mm Distance of shafts: 900-3500 mm axis height: 550 mm total power requirement: kW weight of the machine ca.: 4,5 (9 ) t dimensions of the machine ca.: m Load capacity per piece 30 t load-carrying along 60 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 1040 mm Turning length: 2000 mm Spindle bore: 130 mm Motor power: 25 HP/kW MACH-id     5054 MAKE          EST Ticino TYPE             ET 520 YOP               1988 SPECIFICATIONS Swing over bed Ø     1040 mm Swing over cross slide        710 mm Distance between centres       2000 mm Power        25 Kw Spindle bore        130 mm Spindle speeds / ranges      600 Rpm Bed width         600 mm Work piece weight       8500 kg DIMENSIONS Length        5100 mm Width          2350 mm Height         1800 mm

weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 100-2500 mm gear diameter: 250 mm gear width: 140 mm total power requirement: 0,8 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,0 x 1,4 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 1300 mm Turning length: 6000 mm Spindle bore: 160 mm Motor power: 30 HP/kW CNC Brand: Heidenhain CNC Model: Manuel Plus MACH-id   418 MAKE       EST Ticino TYPE         ET BM CT 620 x 4000 YEAR       2000 SPECIFICATIONS Swing over bed Ø      1300 mm Control      Manuel plus HeidenHain Swing over cross slide       1000 mm Swing in the gap Ø     2000 mm Distance between centres     6000 mm Work piece weight       8000 kg Spindle bore                 160 mm Spindle speeds / ranges      500 Rpm Power     30 Kw DIMENSIONS Length    9000 mm Width     3200 mm Height&nbs ...

weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 480 x 180 mm feed: 100 - 1000 mm/min total power requirement: 2 x 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.