129,495 used machines on RESALE, but how to find them? Machine Search
turning diameter over bed: 280 mm turning diameter over slide rest: 158 mm turning length: 600 mm turning speeds: 45 - 2000 U/min centre height: 140 mm spindle bore: 26 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,25 - 2,5 mm thread - inch: 6 - 96 TPI connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,16 t dimensions of the machine ca.: 1,26 x 0,58 x 0,60 m Professional metal lathe, gearing machine - 3-jaw chuck - 4-jaw chuck - hardened bed tracks - Clamping plate - 4-way chisel holder - Feed protection - standing and rotating bezel - Splash guard - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Details Machine no. 2042.6616-05 Year of manufacture 2004 Circumferential diameter over bed 1,000 mm Circumferential diameter over bed 1,000 mm Center height over flat web 500 mm Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Three-phase motor infinitely variable (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control system Manualplus 4110, completely renewed about 1 to 2 years ago 2 Lynettes Equipped with rotary power chuck, diameter approx. 500 mm. Including a lot of accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix base holders, size D. Machine was equipped with a separate milling device, with its own control system, value approx. € 20,000.00. Only served by the owner, ver ...
turning diameter: Ø30/300mm mm turning length: 3055mm +/-0.3mm mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: max 300 mm turning length: max. 2000 mm control: Siemens Serie 810D turning spindle: Durchlass 90 mm : 300 mm Feed speed: 6/6 m/min. number of tools: 8 quill stroke: 300 mm diameter of quill: 105 mm taper MK: 6 coolant tank: 100 l total power requirement: 15 kW weight of the machine ca.: 4650 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turret Lathe Linen Leromat 36 Year of construction unfortunately unknown. Lathe is fully functional.
Control Manual Plus Turning diameter 260 mm Circumferential diameter 475 mm Center width 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 4-fold parachute holder Tailstock
Cycle-controlled lathe Dimensions: 4000 x 2300 x 1800 mm Weight: 4800.00 kg Description: Cycle-controlled lathe with large hollow spindle and high speed, with FAGOR 8055 TC CNC control. Specifications: Turning diameter over bed: 580 mm Turning diameter in the offset: 800 mm Offset length from spindle nose: 280 mm Turning diameter over support 305 mm Center height 290 mm Hollow spindle diameter usable: 80 mm Female thread at spindle end: M85xP1.5 Center width 2200 mm Spindle Spindle speeds: infinitely variable in 2 stages, automatic switching! Level 1: 80 - 750 rpm Level 2: 750 - 2400 rpm Spindle nose: DIN 55026 - A 1/ 8 Recommended chuck size: 250 mm diameter Largest workpiece weight (with steady rest): 2000 kg Feed spindle bearing: 120mm iD/OD Rear spindle bearing: 110mm iD/OD Spindle motor power S1 (100%) / S2 (40%): ...
Description Cycle lathe Chevalier FCL-2660 Details Year of construction 2008 Machine no. A40307 C52 Height 2,150 mm Width 2,100 mm Length 3,900 mm Bed width 450 mm Bed height 1,000 mm Bed length 3,600 mm Face plate Ø 620 mm Forkardt Chuck Ø 315 mm Max. workpiece lengths 1,800 - 2,000 mm Turning diameter over bed 660 mm Turning diameter over support 400 mm Center height 330 mm CNC Fagor Cycle Control Lynette Ø 400 mm Outer and inner bolsters
Description Cycle lathe Chevalier FCL-2460 Details Height 1,950 mm Width 1,600 mm Length 4,100 mm Bed width 410 mm Bed height 850 mm Bed length 2,300 mm Face plate and chuck possible by arrangement max. workpiece lengths 1,500 mm Turning diameter over bed 600 mm Turning diameter over support 360 mm Center height 300 mm CNC Fagor cycle control function untested Lynette possible by arrangement 4-speed revolver
turning diameter: . mm turning length: . mm control: . turning diameter: . mm turning length: . mm swing diameter over bed slide: . mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BOEHRINGER VDF V 800 universal lathe was built in 1977 in Germany. The machine, designed for precision machining of workpieces with a maximum diameter of 800 mm and a length of 1500 mm, is distinguished by its robust construction, which ensures excellent stability during even the most intensive challenges. On the other hand, the spindle features an optimised speed range, allowing efficient turning using both high-speed steel and carbide-tipped tools. All of this makes the BOEHRINGER lathe the perfect choice for both unit and series production. The total weight of the machine is approximately 5400 kg. Technical specifications of the BOEHRINGER VDF V 800 metal lathe - maximum turning diameter above the bed: 800 mm - maximum turning diameter over the slide: 515 mm - maximum turning length: 1500 mm - maximum spindle rotational speed: 1120 rpm - minimum spindle rotational speed: 5.6 r ...
turning diameter: mm turning length: mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand Takang Machine no D895 Type TR1200x6000 Year of make 2015 Oil country Lathe Distance between centers 6.000 mm Center height 600 mm Turning diameter above the bed 1.200 mm ø Turning diameter above the support 890 mm ø Passage 150 mm ø Bed width 560 mm Glasses 400 & 550 mm 4-Jaw Chuck 1.000 mm ø Digital readout Heidenhein Power on the top support Rapid traverse along and transverse movement 3 lane bed Machine size (lxwxh) 8.500 x 1.700 x 2.300 mm Machine weight 13.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: height of tips on the bench 700mm Height of tips on carriage 520mm Distance between closed bench centers 4,000mm Distance between drills with extended bench 6,000mm Extended Bench Drill Height 1,100mm mobile bed stroke 2,000mm 150mm bar passage various accessories available (plateau, chuck, steady rests, tailstocks,...) Supplied machine books 2-axis dimension display MACHINE IN EXCELLENT CONDITION
Max. blank / workpiece over bed1200 Max. blank / workpiece in the gap2400 Ø Centre height over bed600 mm Distance between centers2350 mm Length of the gap400 mm Maximum sheet thickness6 mm Stroke X-Axis1200 mm Stroke Y-Axis300 mm Speedrange6 - 675 Rpm Power40 kW Stroke pinole quill750 mm
turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used machine in good condition. Available for immediate delivery. - Power source : 80 kVA - Axes: 5 - Control: SIEMENS 840D
Key data: 1250 mm, 900 mm, 8000 mm
The largest diameter of the processed product in mm: above the bed 1250 above the caliper 900 Distance between centers in mm 8300 The largest weight of the installed product in kg is 30,000 The number of spindle speeds is 3 The limits of the number of revolutions of the spindle in minutes are 3.15—200 Number of pitches: longitudinal 18 transverse 18 Feed limits in mm/rev: longitudinal 0.16-8 transverse 0.1-5 Number of calipers 2 The angle of rotation of the upper part of the caliper is ±90 degrees The power of the main electric motor is 60 kW Dimensions of the machine (length X width X height) in mm 15200X2500X2060 Weight 53.4 tons
Used machine in good condition. Available for immediate delivery. - Power source : 70 kVA - Control: SINUMERIK 880M - Driven tool speed: 6.000 rpm
Used machine in good condition. Available for immediate delivery. - Spindle power?: 28/21 kW - Control: 840 D SIEMENS - Axes: 5 - Workpiece diameter: 240 mm - Max. spindle speed: 5.000 rpm - Stroke (X): 190 mm - Stroke (Y): 40 mm - Stroke (Z): 555 mm - Maximum tool diameter ?: 200 mm - Main spindle bore: 79 mm - Weight: 6.500 kg
Used machine in good condition. Available for immediate delivery. - Number of tool stations: 4 - Spindle power : 15 kW - Spindle power : 5.5 kW - Cutting feed rate (X x Z): 205 x 580 mm / min - Max. spindle speed: 4.500 rpm - Weight: 4.500 - Dimensions (long x wide x high): 2.997 x 1.592 x 1.740 mm
turning diameter over bed: - mm turning diameter over slide rest: - mm turning length: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used machine in good condition. Available for immediate delivery. - Number of tool stations: 4 - Spindle power : 15 kW - Spindle power : 5.5 kW - Cutting feed rate (X x Z): 205 x 580 mm / min - Max. spindle speed: 4.500 rpm - Weight: 4.500 - Dimensions (long x wide x high): 2.997 x 1.592 x 1.740 mm
faceplate diameter: 1800 mm turning diameter over slide rest: 2500 mm turning length: mm Control: FAGOR 8050 T total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm floorplate 3250 x 2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 mm turning diameter over slide rest: - mm turning length: 1000 mm total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,511,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Bed length: 900 mm Headstock - turret distance: 300 mm Tip height: 102 mm Number of seats in the turret: 6 Diameter of the holes: 20 mm Collets Opening: 22 mm Connection: 380 V Spindle speeds: 840 - 3000 rpm. with accessories Dimensions: (LxWxH): 900x1300x1310 mm Weight incl. pallet: approx. 650
turning diameter over bed: mm spindle passage: 23 mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 300 mm turning length: 1500 mm control: FanucSystem 6 T total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4x2x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 320 mm turning length: 750 mm control: Siemens type: 810DL CCUO turning diameter over slide rest: 150 mm cross movement: 185 mm spindle passage: 52 mm turning speeds: 14-3550 U/min transmission ratio: 2 quill stroke: 120 mm rapid traverse: 6 m/min main drive motor: 7 kW 3-jaw-chuck diameter: 200 mm total power requirement: 10 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,6x1,44x1,44 m 8950 turning hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW ...
faceplate diameter: 1320 mm swing diameter: 1400 mm turning height: 800 mm workpiece weight: 6000 kg cross rail adjustment: 800 mm Tools changer for 12 tools: chip conveyor: coolant tank: Control: Sinumerik 840 D transmission ratio: 3 daylight table - ram: 950 mm slide adjustment: 750 mm total power requirement: 60 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,5x5,5x4,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1100 mm turning length: 6000 mm control: Siemens 840D turning diameter over slide: 740 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Die Maschine ist Überholt und hat eine neue Steuerung The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: max.: 4000 mm turning diameter over slide rest: . mm turning length: 7500 mm speed: 0-750 u/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1100 mm swing diameter: 1250 mm turning height: 1300 mm Control: Siemens type: 805 workpiece weight: 4000 kg Tool changer: 10 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2200 mm turning diameter over slide rest: 2200 mm turning length: 10000-11000 mm control: Sinumerik 840 D workpiece weight: 70.000 kg faceplate: 2000 mm steady: 2 Torque: 125000 Nm feed: 0,3-4000 mm/min rapid traverse: 4000 mm/min roll stand: total power requirement: 110 kW weight of the machine ca.: 120 t dimensions of the machine ca.: 22x6,2x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1070 mm turning diameter over slide rest: 710 mm turning length: 11000 mm Control: Siemens type: 840 D bed width: 710 mm transmission ratio: 2 turning speeds: 3,55-710 U/min diameter of quill: 200 mm quill stroke: 350 mm spindle passage: 128 mm chip conveyor: faceplate: 1000 mm steady: 500 mm steady: 500 mm steady: 500 mm offen steady: 500 mm offen steady: 800 mm offen steady: 800 mm offen roll stand: 2 St main drive motor: 71 kW total power requirement: kW weight of the machine ca.: 27 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 930 mm turning diameter over slide rest: 630 mm turning length: 8000 mm speed: 800 U/min spindle passage: 105 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1000 mm turning diameter over slide rest: 640 mm turning length: 6300 mm turning dia. in gap: 1250 mm spindle diameter: 50 mm speed: 6-925 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1150 mm turning diameter over slide rest: 800 mm turning length: 6300 mm spindle diameter: 100 mm speed: 4-800 (x24) U/min turning dia. in gap: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1650 mm turning diameter over slide rest: 1200 mm turning length: 7500 mm turning dia. in gap: 2500 mm spindle diameter: 105 mm speed: 3,55 - 180 (x24) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1070 mm turning length: 8500 mm control: Alan Bradley 9 Series Turning diameter over slide: 800 spindle diameter: 130 mm speed: 1,12 - 1120 m/min voltage: 480 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 4000 mm turning diameter over slide rest: . mm turning length: 5000 mm total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm cross rail - adjustment: 600 mm work spindle adjustment: 750 mm Tools changer for 12 tools: total power requirement: 69 kW weight of the machine ca.: 25 t dimensions of the machine ca.: m reconditioned The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1100 mm turning diameter over slide rest: 710 mm turning length: 6000 mm Torque: 35000 Nm Height of centres: 550 mm steady: 100-440 mm steady: 280-550 mm steady: 80-300 mm chip conveyor: workpiece weight: 10000 kg workpiece weight in steadies max.: 15000 kg total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rotary table for lathe chuck PAGUS diameter lathe chuck: max. Ø 200 mm bolt circle lathe chuck: 140 - 180 mm flange: Ø 130 mm table height: 70 mm 360° rotatable base plate: 290 x 220 mm used, tested ! Dimensions: 350 x 300 x 80 mm
Control: Mazatrol Fusion 640M Technical data: X-axis: [mm] 1740 Y-axis: [mm] 760 Z-axis: [mm] 660 Max. speed: [1/min] 10.000 spindle motor: [kW] 15 tool holder: SK 40 tool places: 30 Equipment: Chip conveyor No internal cooling (IKZ) Find more here - /
Gildemeister sprint 208 + IEMCA Boss 338 HD 2016 Gildemeister Sprint 20/8 CNC Lathe – High-Precision Turning Machine Looking for a high-performance CNC lathe for precision machining? This 2016 Gildemeister Sprint 20/8 is a versatile, reliable, and efficient turning machine that’s perfect for complex part manufacturing. --------------------------------------------------------------- Machine Details: - Manufacturer: Gildemeister (DMG Mori) - Model: Sprint 20/8 - Year of Manufacture: 2016 - Control System: Fanuc 32i-B CNC - Type: Sliding Headstock Automatic Lathe - Condition: Excellent (well-maintained and regularly serviced) --------------------------------------------------------------- Specifications: - Max Bar Diameter: 20 mm - Max Turning Length: 200 mm - Number of Axes: 8 - Main Spindle Speed: Up to 10,000 RPM - Sub-Spindle Speed: Up to 10,000 RPM - Tool Capacity: - 22 Too ...
Wagner WDE 500 Lathe Z=1500 X=500 Control Sinumerik 802C Spindle bore 80 17030 operating hours. Find more here - / Contact us at -
DOOSAN LYNX2100LMB (installed new in 2021). Model: LYNX 2100LMB Power Connection: AC 380V, 3-phase, PE, 50/60 Hz Rated Power: 27.07 kVA Interruption Capacity: 5 kA Full Load Current: 41.14 A Short-Circuit Capacity: 10 kA Control System Output: L22SYH404A05 Weight: 3000 kg Manufacturing Date: November 2020 (2020.11) Machine has the following list of toolholders ; A. Turning Holder - OD Tool Holder (Right & Left) - Quantity: 2 pieces - Face Tool Holder (Right & Left) - Quantity: 1 piece - Double OD Tool Holder (Right) - SUB- Quantity: 1 piece - Cut-off Tool Holder (Right Hand) - Quantity: 1 piece B. Boring Holder - ID Tool Holder - Quantity: 2 pieces - Triple ID Tool Holder - Quantity: 1 piece - U-Drill Cap - Quantity: 1 each C. Milling Tool Unit - Straight (Short) - Quantity: 2 pieces - Angular - Quantity: 2 pieces D. Tool Sleeves - Boring Sleeves (Main) - Quantity: 1 ki ...
maximum number of results exceeded
please refine your search
