vertical turning lathe used for sale

CENTRIFUGAL DRYER for pellets (to go with an existing pelletizer), for a 350/400 kg/h capacity of PE PP ABS PS PC flakes, made of sturdy AISI304 stainless steel with vertical axis, driven by a 2.2 kW 3 Ph.asynchronous motor,, complete with soundproofed discharge cyclone, stainless steel tank for water recovery and recycling, 1.1 kW water ump,, equipped with drainage for overflowing, HEAT EXCHANGER GROUP, made of painted carbon steel, internal copper tube bundle, with removable head to facilitate cleaning, fixed to the tank using brackets, float with water replenishment valve, Electrical board of machine wiring, Users manual, CE compliance, installed power - used power in work: about 60-65% : 2.2, conditions: new machine, type: for granulate - this machine goes after the pelletizer, capacity: 300-450 kg/h

VERTICAL MIXER 14.000 lt., Total height approx 5.500 mm, Loading from top with cyclone and dust sleeves collector, Max diam.2.380 mm., Constructed in painted electro-welded carbon steel., Inner auger diam.350 mm., Sampling hopper with safety grid and shutter, mm.600×500, Pulley and belt transmission, protected by carters, Inspection doors with safety limits, Cleaning hinged door with on bottom of cone for complete discharging,, with safety opening, Side discharging pipe to big bag with valve, paddle type max level indicator, automatic greasing kit, 11 kw electric motor, Complete with control panel., Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11

Semi-automatic vertical intermittent motion cartoner in Stainless Steel with output up to 70 boxes per minute (depending on product type and number of operators) Suitable for Pharmaceutical, Cosmetics, Nutraceutical, Contract Packing, Biopharma, FMCG, Medical Devices and other industries. Excellent condition for age - originates from a prominent Pharmaceutical manufacturing in Europe, where machine was serviced on regular basis. Equipment size: L: 3300mm x W: 1600mm x H: 1,900mm Weight total: approx. 1650kg Technical info: Carton box size range: - Width: 20mm to 115mm - Depth: 15mm to 75mm - Height: 50mm to 195mm - Width + Depth (max) up to 190mm CE marked Fitted with side cassette feeder for empty boxes Pre-folded leaflet inserter (leaflet dimensions: Length: 100 to 210 mm, Width: 18-45 mm) Fully guarded with interloc ...

Rutil Vertial Injection Moulding Machine Year of manufacture: 2001 Type: Injection Configuration: Vertical Clamping force: 350 tons Injection volume: 2000 cc Upper intermediate frame: Yes Lower intermediate frame: Yes Heater plate dimensions: 600×650 mm Tie bar distance: 600 / 340 mm Additional heating option: Yes Sliding plate: Yes

Amut Vertical centrifugal dryer under efurbishing, mm.400 rotor diameter,, length mm.1.900 mm.,, 120 mm.long paddles on the whole length,, AISI 304 steel basket from diam.mm.650,, height : 1.975 mm., mm.3,0 holes,, self-cleaning system through water sprays., Rolling type bearings., 55 kw, 1.550 tpm engine., About 1.000 kg./hr. with film and depending on material and water content, Construction year 1998., Machine is offered totally reconditioned, feeding auger and discharging cyclon can be quoted on request, See how a similar machine was refurbished, [here](.germanplast/pages/photo-gallery#&gid=1&pid=2), installed power - used power in work: about 60-65% : 55 kW, availability: 5 weeks ca, options available: loading auger à discharging cyclon, capacity: 1.000 kg/h with film ,more with rigid plastics, depending on material and water %, conditions: refurbished, type: Vertical

Late model Hobart commercial meat saw. Model 6801, serial number 31-1464-941, 200/230volts and 3 phases. Tested. Comes with one 142" blade. Unit has normal wear of used equipment, will require some extra cleaning.

GeneralCNC Grindingmachine; Control: Fanuc 32iA Special equipmentRMS-SensorSpecial equipment-Transformer - Handwheel - 680l coolant systemSpecial equipment- Program memory (512kb) - Registerable programs (1000 pcs.) - Signal light (3-stage) - High-performance magnetic separator (120 l/min) - Bed cleaning - Coolant temperature control unit - Wheel spindle cooling function - ATC unit (6 tools)

General SKU437X1383 LocationBarneveld Pressure Working pressure shell45 Bar Vacuum possible shellcheck Working pressure tubes25 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface30 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4541 (321) Heat exchangercheck Horizontalcheck Heating surface30 m² Tube capacity190 l. Number of tubes:40 Tube diameter25 mm Tube length10 600 mm Wall thickness tubes2 mm Max. temperature250 Shell capacity420 l. Shell diameter400 mm Shell length6 400 mm Max. temperature250 Shell connectionsDN80 Cover connectionsDN80 Information MakeK.ley Eiterfeld Serial5654 Magento base g_extra_specificationsPressure -1/25 bar, volume 190 l., allowable temperature 250°C, jacket volume 420 l., pressure -1/45 bar, 30 m2, own weight 1800 kg, drawin ...

Manufacturer: Engel Model: Insert 80H/35 – Vertical Type: Vertical injection moulding machine Year of manufacture: 2007 Operating hours: 22404 Closing force: 35 t Screw diameter: 18 mm Max. injection volume: 25.4 cm3 Fixing plate: D1200 mm / 560 x 430 mm Machine weight: 6.1 t Find more here - / Contact us at -

900L Vertical Tank Stainless Steel Working capacity 5 Barrels / 200 Gallons. Vertical stainless steel vessel, dished top and base. Free standing on 3-off stainless steel legs with adjustable feet. DIN40 Top inlet. 1 x 120mm diameter Viewing Glass 1 x DIN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU018X186 MakeThyssen Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Volume1000 Ltr. Specified Features - Vertical tank MaterialStainless steel Closed vertical tankcheck Capacity1000 Ltr. Vessel sizes880x1090x1100 mm Dished bottomcheck Manholecheck Dia 400 mm OutletDia 70 mm Information Floorspace1,02x1,22 m Total height1,67 mVertical tanks-Tanks > Vertical tanksBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU262M322 Makeunknown, manufacturer plate is missing Mounted on legs(verrijdbaar) Main Features MaterialStainless steel Volume300 Ltr. Specified Features - Vertical tank MaterialStainless steel Open vertical tank(1x) Capacity300 Ltr. Vessel sizesdia. 785x610mm With covercheck Flat bottomcheck Top connectionsdia. 30mm Outletdia. 70mm With jacketcheck Information LocationBarneveld Floorspace1,1x1,1 M Total height0,9 M Weight350 KGVertical tanks-Tanks > Vertical tanksBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU262M323 Makeunknown, manufacturer plate is missing Mounted on legs(verrijdbaar) Main Features MaterialStainless steel/Aluminium Volume300 Ltr. Specified Features - Vertical tank MaterialStainless steel Open vertical tank(1x) Capacity300 Ltr. Vessel sizesdia. 785x610mm With covercheck Flat bottomcheck Outletdia. 70mm With jacketcheck Information LocationBarneveld Floorspace1,1x1,1 M Total height0,9 M Weight350 KGVertical tanks-Tanks > Vertical tanksBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU290S401 LocationBarneveld Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacityca. 500 ltr Vessel sizesdia. 1100x650mm Dished topcheck Dished bottomcheck Manholedia. 500mm Top connectionsdia. 32mm(1x), dia. 40mm (1x), dia. 170mm (1x) Outletdia. 50mm With jacketcheck Information Makeunknown, manufacturer plate is missing Mounted on legscheck Floorspace1,4x1,4 M Total height1,8 M Weight400 kgVertical tanks-Tanks > Vertical tanksBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Luwa SMS GmbH LN-0200 - Vertical Thin Film Evaporator consist of a cylindrical, vertically-arranged body with heating jacket. A rotor inside the body is equipped with rows of pendulum blades along the full length of the dryer., Special thin-film evaporator designed for dairy service, discharge system, vapor pipe, condenser, and drives. It was in used as a pilot plant on a dairy service until early 2001 and afterwards converted to a 2 square metre cheese base processor with discharge system and ran till 2025 in a Casein plant in a dairy factory in New Zealand., The vertical thin film dryers operate as follows: The wet feed is spread by the pendulum blades in a thin layer onto the heated wall. During this process, the volatile components evaporate continuously out of the product layer at high evaporation rates. The pendulum blades are designed with a minimum gap to the heated wall to preve ...

General SKU234M148 Makeunknown, typeplate is missing Typefloveyor LocationBarneveld Main Features Motor3 KW Length5000 mm Inlet diameter400 mm Specified Features - Vertical screw conveyor MaterialStainless steel Vertical conveyor screwcheck Tube-modelcheck Diameterscrew 400mm Lengthscrew 3,4 M Motorscrew 4 KW 380 Volt, floveyor 3 KW 380 Volt Screw speed28 rpm Conveying height5,0 M Information With switchcheck Floorspace+/- 3,5x1,5x1,0 M Total height+/- 6,0 M Weight1400 KGSpicesPlastic & polymersVertical screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicAgrochemicalsBiotechnologyRubberOther chemicalStarchFine  ...

General SKU234M150 MakeVan Beek Screwconveyor Systems Drunen TypeKR-150 No.250184 Year of construction1995 Mounted in framecheck Main Features Motor1.5 KW Length3500 mm Inlet diameter270 mm Specified Features - Vertical screw conveyor Vertical conveyor screwcheck Trough-modelcheck Diameter270 mm Length4300 mm Between inlet and outlet3500 Shaft diameter70 mm Pitch50-130mm With hoppercheck (± 500 l) Inlet1200 x 270 mm Outlet± dia. 260x120mm (oval) Motor± 1,5 KW (motor tag is missing) Outlet height0.6 m With coverscheck MaterialStainless steel 1.4552, Stainless steel Information LocationBarneveld With switchcheck Floorspace4,7 x 1,0 m Total height1,65 m Weight390 kgSpicesPlastic & polymersVertical screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubri ...

General SKU222M099 Makeunknown (manufacturer tag is missing) LocationBarneveld Main Features Motor4 KW Length2900 mm Inlet diameter340 mm Specified Features - Vertical screw conveyor MaterialStainless steel Vertical conveyor screws Horizontal conveyor screwConveying and metering screw (1x) Diameterscrew 1= dia. 340mm, screw 2= dia. 150mm Lengthscrew 1= 2900mm, screw 2= 1350mm Between inlet and outlet± 2200mm Inletdia. 210mm Outletdia. 320mm Motor4,0 KW, 220/380 Volt + 0,75 KW, 400 Volt Information Floorspace4,0x0,5 M Total height1,6 M Weight480 KGSpicesPlastic & polymersVertical screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubber ...

General SKU362W1147 LocationBarneveld Main Features Length3200 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4301 (304) Vertical conveyor screwcheck Trough-modelcheck Diameter250 mm Length3200 mm Shaft diameter200 mm Pitch0,85 mm Outlet200x200 mm Motorcheck Conveying height± 2m Information MakeUnknown (missing typeplate) Year of constructionUnknown With switchcheck Floorspace4,05x0,60 m Total height0,50 m Weight400 kgSpicesPlastic & polymersVertical screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicAgrochemicalsBiotechnologyRubberOther chemicalStarchFine chemicalsTea, herbs & coff ...

General SKU362W983 MakeFas Förderanlage LocationBarneveld CEcheck TypeA250 Main Features MaterialStainless steel Motor1.5 KW Length2500 mm Inlet diameter200 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4301 (304) Vertical conveyor screws Horizontal conveyor screwcheck Trough-typecheck Vertical conveyor screwcheck Trough-modelcheck Diameter250mm Length2500 Between inlet and outlet2100 mm Shaft diameter100 mm Pitch190 mm InletDia. 200 mm OutletDia. 200 mm With adjustable packing glandscheck Motor1,5 kW, 230/400 volt, 1405 rpm Screw speed80 rpm Conveying height± 2000 mm With coverscheck Information No.02/02/45 Mach.No.02/02/45 Year of construction2002 Floorspace3,90 x 0,60 m Total height0,70 m Weight390 kgSpicesPlastic & polymersVertical screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.O ...

General SKU362W1148 LocationBarneveld Main Features Motor1.1 KW Length3500 mm Inlet diameter150 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) Vertical conveyor screwcheck Diameter150 mm Length3500 mm Between inlet and outlet2300 mm Shaft diameter55 mm Pitch90 mm InletDia. 150 mm Outlet200x180 mm Motor1,1 kW, 220-240/380-415 volt, 1400 rpm Screw speed64 rpm With coverscheck Information MakeUnknown Year of constructionunknown Floorspace4,30x0,70 m Total height0,50 m Weight200 kgSpicesPlastic & polymersVertical screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubb ...

General SKU204U047 MakeAZO TypeTFS 140 S No.P23110A0/0562 Year of construction2003 LocationBarneveld Main Features Motor1.1 KW Length3400 mm Inlet diameter150 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4404 Vertical conveyor screwcheck Trough-modelcheck Diameter150 mm Length3400 mm Between inlet and outlet2200 mm Shaft diameter100 mm Pitch50 mm Inletdia. 150 mm Outletdia. 150 mm Motor1,1 kW Screw speed82 rpm Outlet height1800 mm Conveying height1750 mm With coverscheck Information Mounted inclined in framecheck Mounted on wheelscheck Floorspace3,4 x 0,64 m Total height1,60 m Weight300 kg CEcheck Extra SpecificationsCapacity = 3070 Ltr./h SpicesPlastic & polymersVertical screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSuga ...

General SKU204U032 MakeAzo TypeTFS 140 S Mach.No.P23110A0/0561 Year of construction2003 Main Features Motor1.1 KW Length2950 mm Inlet diameter100 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4404 Vertical conveyor screwcheck Trough-modelcheck Diameter145 mm Length3000 mm Between inlet and outlet1600 mm Shaft diameter75 mm Pitch75 mm Inletdia. 100 mm (2x) Outletdia. 150 mm Motor1,1 kW Screw speed82 rpm Outlet height0-32,5 ° : 1000 - 1760 mm Conveying height1850 mm With coverscheck Information LocationBarneveld Mounted inclined in framecheck Mounted on wheelscheck Floorspace3 x 0,64 m Total height2 m Weight350 kg CEcheck Extra SpecificationsCapacity = 3070 l/hSpicesPlastic & polymersVertical screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & meta ...

General SKUR0472 MakeTMT (CZ) LocationBarneveld CEcheck TypeSF625/2 Main Features Motor3 KW Length1632 mm Inlet diameter220 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4301 (304) Vertical conveyor screwcheck Tube-modelcheck Diameter190mm Length3026mm Between inlet and outlet1632mm Shaft diameter65mm Pitch150mm Inletdia. 220mm Outletdia. 211mm With adjustable packing glandscheck Motor3 kW 230/400 Volt (Ex) Screw speed87 rpm Information No.3807/02 Year of construction2011 Floorspace0,9x0,5 M Total height4,0 M Weight300 Kg ATEX compatiblecheckSpicesPlastic & polymersVertical screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBioph ...

SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...

Machine weight: 20,000 kg Faceplate diameter 1250 mm Number of supports: 1 pcs Dimensions: height 4250 mm width 5630 mm depth of 3550 mm Extras: copying apparatus, turret head on the vertical support Technical condition at the time of sale: Replacement rotary amplifier on thyristor converter. Not operated since 1994 p. Small repair and adjustment of electrical and mechanical parts. The maximum dimensions of a workpiece Height 1150 mm The diameter of 1400 mm Weight 8000 kg

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

CNC Vertical Turret Lathe with C axis and live tool 3 Turning Plates Changer (translating pallet system) EQUIPPED WITH: Siemens Sinumerik 840C CNC Control (2015 Retrofit) Vertical Ram with Live Spindle Pallet Changer (3-Pallets) 16-Station Automatic Tool Changer C-Axis Table Year 2005 CNC Siemens 840 C Max. turning dia.: 2200 mm Max. turning height: 1800 mm Ram travel: 1500 mm Main drive: 75 kW Live spindle: 15 kW Spindle rotations: 45- 1350 1/min Max. workpiece weight: 12 000 kg Pallet changer with 3 pallets (turning plates) Tool magazine: Right: 8 turning tools Left: 8 boring/milling tools Feeds: 0,1-6000 mm/min Carriage feed: Vertical: 1500 mm Horizontal: 1320 mm Table rotation (2 ranges): 2,5 – 70 / 10-280 Max. table torque: 50 000 Nm Machine weight: 43 Ton Machine HxWxL: 6,8 m x 10 m x 9,7 m

Make: Schiess AG Model: 14 DK 1250 Year of construction: 1982 Overhaul: Complete general overhaul in 2021 Control: Siemens SINUMERIK 840D (new in 2021) Condition: Used, fully refurbished Availability: Immediate delivery Machine type: CNC single-column vertical lathe Weight: Approx. 12,000 kg Technical specifications: - Turntable diameter: 1,250 mm - Table height: 1,000 mm - Max. workpiece height: 1,150 mm - Max. swing diameter: 1,400 mm - Support travel (right): 750 mm - Support travel (left): 180 mm - Max. traverse movement: 1,150 mm - Max. workpiece weight: 5,000 kg - Table speed: 3.15–315 rpm (2 gear steps) - Main motor: 40 kW, 100–2,800 rpm - Max. torque on table: 14,000 Nm - Max. cutting force: 50 kN Auction-ID: A7-45257-4

L + Z lathe HOLZMANN type ED 914GNMasch. No. 20265 Year of construction 2006Center width 800 mmTurning diameter over bed 300 mmCenter height over bed 150 mmTurning diameter over support 190 mmCenter height over support 95 mmSpindle bore 38 mmSpindle speed 70 - 1400 rpm. 9 stepsFeed longitudinal and flatChuck flange Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Drive power 1.5 kWNet connection 400 volts, 50 Hz- Spindle speed over 9 gear stages - 4-jaws

Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nr. 02 VERTICAL LATHES FAMAR MODEL: ERGO 230 SERIAL NUMBER: FAMAR NR. 20.09/1-20.09/2 SWITCHABLE Ø: 250 MM SWITCHABLE HEIGHT: 125 MM Ø SELF-CENTERING: 250 MM SPINDLE ATTACHMENT: 6 ASA ROTATIONAL SPEED: 6000 RPM TOOLHOLDER STATIONS: NR. 12 MOTORABLE: NR. 12. CONTROL: SIEMENS 810

VERTICAL LATHE FAMAR MODEL: ERGO 210 YEAR: 1995 SERIAL NUMBER: FAMAR NR. 95/12 MAX MACHINABLE DIAMETER 200 MM LENGTH OF WORKPIECE MAX MACHINABLE 150 MM X-AXIS STROKE: 340 MM Z-AXIS STROKE: 215 MM FAST AT 60 M/MIN ASA CHUCK NOSE 6 " SPEED: 6000 RPM

Control SIEMENS Sinumerik 840D Specifications: Workspace - Max. rotation and turning diameter 2,000 mm - Max. turning height 2,000 mm - Face plate diameter 1,600 mm - Max. face plate load 11,200 kg - Chisel slide travel (vertical) 1,400 mm Smallest plunger diameter 330 mm Plunger cross-section 250 x 210 mm - Drive power of the main motor 71 kW - Crossbar adjustment 1,170 mm - Crossbeam support of central face plate to the right 1,170 mm - From the middle of the face plate to the left 25 mm Speed of faceplate: - Number of transmission stages 2 - 1 level 3.15-80 min-1 - 2 Level 12.5-315 min-1 - Lifter and support hydrostatically guided Feeds - X and Z 0.1 2000 mm/min - Rapid traverse X and Z 6,000 mm/min - Weight approx. 24,000 kg - Voltage 400 V 50 Hz - Connected load 175 kW - Space requirement L = 10,000 mm B = ...

Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,500 mm Circumferential diameter (max.) 4,000 mm Workpiece height (max.) 3,000 mm Total height of the machine 7,250 mm Maximum workpiece weight 50,000 kg Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam 1,500 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Stations Crossbeam Support (Left) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Changer Main Drive: Main motor power 100 kW Face plate speed range 1-100 rpm. Maximum torque at the face plate 100  ...

CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours ...

Spindle diameter 3,000 mm Turnerable diameter 3,200 mm Maximum workable height 2,000 mm Weight allowed over spindle 40 ton Pump engine power 63 kW Spindle rotation speed 0.66-62 RPM Machine weight 86,000 kg Dimensions 9.345x5.120x6.030 mm

Platform diameter 2,800 mm Max turnerable diameter 3,200 mm Maximum height of the workpiece 1,600 mm Weight allowed above platform 16,000 kg Main engine power platform 55 kW Spindle RPM 1.25-63 Spindle No. Crossbar stroke 1,240 mm Horizontal head stroke 1,720 mm Vertical head stroke 1,200 mm Total machine weight 43 ton

Ø max. of the piece: 2200 mm Ø clamping of the table: 2000 mm Maximum load on the table: 12000 kg Maximum height of the piece: 1200 mm RAM Stroke (Z): 720 mm Main engine power: 55 kW

platform diameter: 1450 mm (HYDRAULIC - hydraulic spindle) maximum diameter of the piece: 1650 mm maximum height of the piece under the crossbar: 1200 mm - under tool holder: 1000 mm maximum workpiece weight: 11000 Kg mobile crossbar running on the plinth: 900 mm fast movement speed: 400 mm/min. slow displacement speed: 100 mm/min positioning accuracy on the base: +/- 0.1/100 mm main drive engine power: 60 KW platform advancement range: 2-280 rot/min number steps speed change box 3 work support stroke (X-axis): 1542 mm vertical stroke work support sled (Z-axis): 1200 mm sled section: 250x250 mm Milling shaft cone: ISO 50 milling engine power: 22 KW milling shaft speed range: 20-2000 rot/min X-Z axis work feed range: 1-4000 rot/min fast forward: 6000 rot/min C axis feed (slow-regimo milling rotation): 1-360 °/min X, Z, C: 45 N ...

Table diameter: 1,200 mm Maximum turnerable diameter: 1,350 mm Spindle power: 47.7 Kw Maximum turnable height: 950 mm Table capacity: 6 ton Table rotation speed: 2.22 ÷ 200 rpm Vertical RAM wagon stroke: 1,000 mm Vertical turret wagon stroke: 760 mm Tilt vertical wagons: 35 ° Total weight: 16 ton CNC FAGOR 8055 Year 1979 REVISED IN 2009

Table diameter 1450mm Maximum working diameter 1600mm Maximum height under the crossbar 1000mm Two balanced RAM Quota viewers Machine working in good condition Machine weight 18 ton This morando vertical lathe is in excellent condition and ready to be installed.

Spindle diameter 2,000 mm Turnerable diameter 2,000 mm MACHINE IN MECHANICAL/ELECTRIC RETROFIT PHASE

CN FAGOR 8055-T Machine equipped with quota viewers, turret 2nd pentagonal wagon Spindle diameter 2,000 mm Maximum turntable height 1,310 mm RAM stroke 1,000 mm Maximum diameter 2,200 mm Spindle Max Speed 150 rpm Nr. 3 wagons type 1 RAM 1 turret 1 side Main engine power 52 kW

Maximum turnerable diameter 1200 mm Maximum permissible diameter 1250 mm Spindle engine power (S1/S6) 55 / 66 Kw Spindle maximum laps 1200 rpm ASA 15" Spindle Attachment Fast speeds 12 m/min X-axis stroke 750 mm Z-axis stroke 750 mm Rated engine torque 20 (X)-20 (Z) Nm Peak engine torque 80(X)-80(Z) Nm Nominal thrust force 1200(X) -120 (Z) N Screw pitch 10 (X) -10 (Z) mm Tools 24 Crown HIRT tool attachment Maximum weight per cell 15 kg Tool change cycle time 10 seconds Maximum weight on tool change ~ 250 Average tool weight ~ 10 Maximum milling tool diameter 150 mm Maximum tool length 350 mm Siemens Sinumerik Control

Ø plateau: 1250 mm Top speed: 500 rpm - 2 ranges Ø false plateau: 1450 mm Maximum piece: 1550 mm Maximum height of the piece: 1200 mm RAM stroke: 800 mm Crossbar stroke: 850 mm Tool warehouse: 10 ATC CNC Siemens 810 D

Ø board: 1250 mm Maximum turnerable: 1500 mm Useful height: 1355 mm Vertical crossbar stroke: 800 mm Ram vertical stroke: 1000 mm Toolholder number: 15 Table pruned: 12000 kg CNC Tesla NS 642 C Fast: 8 m/min Power: 40 kW Weight: 27.2 ton

Ø board: 1,800 mm Maximum working ø: 2,000 mm Max. Turning height: 1,250 mm Max. weight on the table: 15 tons X-axis: 2700 mm Z-axis: 1200 mm Axis C 360 ° Table speed: 3 - 300 rpm Board engine: 60 kw RAM: 250 x 300 mm Work progress: 0 - 2000 mm/min. Nc: FANUC 15 T SERIES ATC: 50 ISO 50 tools Total weight: 58 ton

MAZAK Mega Turn 900 CNC Vertical Lathe TECHNICAL FEATURES: Year: 2018 NC Type: MAZATROL SmoothG Maximum diameter Machinable: 920 [mm] Maximum diameter Turning time: 1000 [mm] X-axis travel: 470 [mm] Z-axis travel: 876 [mm] X-axis fast feed speed: 24000 [mm/min] Y-axis fast feed speed: 24000 [mm/min] Spindle Nose: A2-15 Maximum speed Spindle: 1250 [rpm] Spindle power: 30 [kW] Spindle torque: 3655 [Nm] Maximum distance between spindle nose and turret face: 1030 [mm] Maximum weight machinable (including mandrel): 3000 [Kg] Minimum distance. between spindle nose and turret face: 154 [mm] Number of turret stations: 12 Turret Index Time: 0.4 [s/pos] Irrigation tray capacity: 516 [l] Installed power : 58.9 [kVA] Rated Current: 109 [A] Supply voltage: 400 [V] Working time: 2472 [h] Number of cutting hours: 2297 [h] Dimensions: 2375 × 4558 × 3659 [mm] Weight: 1300 ...