vertical turning 4 used for sale

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate comes from: a Hüller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm -Plate: is solid -Groove width: 12 mm -Dimensions: 500/475/H68 mm -Weight: 90 kg

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Manufacturer: ACOME Contact, fiber optic universal cable -Type: 4x50/125 OM2 N6997 -Application area: indoor and outdoor -Length: 153 m -Price: complete -Dimensions roll: Ø 710 x 410 mm -Weight: 16 kg

A die-cutting and embossing machine Woschnik + Partner is available. Stroke rate: 9000/h, max. sheet dimensions X/Y: 820mm/1130mm, min. sheet dimensions X/Y: 360mm/400mm, gripper margin adjustment: 10mm-17mm, closing frame dimensions X/Y: 820mm/1134mm, max. die-cutting dimensions X/Y: 800mm/1120mm, cutting rule height: 23.8mm, max. punching force: 4000kN. Machine dimensions X/Y/Z: approx. 8000mm/2650mm/2950mm, weight: approx. 30000kg. Documentation available. An on-site inspection is possible.

Servo motor, electric motor, DC motor, pitch motor, pitch drive, rotary encoder, tachometer, encoder, -Manufacturer: RUCKh -Type: Pitch GH 112/4XL -Power: 4.5 kW -Max. Speed: 1450 rpm -Voltage: 288 V -Brake: 100 Nm -Fan -Construction: B5 -Tachometer -Shaft: Ø 28 x 60 mm -Dimensions: 890/285/H525 mm -Weight: 100 kg

Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton

12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm

met plaatsteunsysteem Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 11 > 24 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 20 HP Length: 4500 mm Depth: 1942 mm Height: 2050 mm Weight: 8,3 ton Number of sheet holders: 23x

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H315 mm -Weight: 111 kg

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 150 mm/sec work speed: 10.0 mm/sec return speed: 140 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 110 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 15000 kg range L-W-H: 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAUL ...

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: Micromaster 420 6SE6420-2UD17-5AA1 -max. power: 0.75 kW -Input: 380 - 480 V 10% -10% 3ØAC 3.7 A 47 - 63 Hz -Output: 0-Input V 3ØAC 2.1A 0-650Hz -Protection class: IP 20 -Quantity: 1 piece available -Dimensions: 73/150/H173 mm -Weight: 1 kg

Edge banding machine, edge banding machine, edge banding machine, finishing unit, buffing unit, modular assembly kit, format processing unit, double-end profiler, edge processing machine, sanding unit, edge banding unit -Unit: from edge banding machine BRANDT KM 35 -Motor: Groschopp type PM1 72-35 - Mot 180 V / 54 W. -Individual components: see photos -Dimensions: 425/270 / H260 mm -Weight: 24 kg

CNC vertical milling machine Type: FBE-4000 Producer: Eumach Year: 2013 Control: Fanuc Series 31i-MB X: 4000 mm Y: 1000 mm Z: 1500 mm Tool magazine: 24 positions Spindle cone: ISO 50 Work area: 1050 x 4100 mm Max table load: 9000 kg Power on spindle: 22/26 KW Spindle speed: 5000 rpm Manual rotating head, speed 3500 rpm Cooling through the center of the spindle Folding the tool tray outside the table area - next to the stand on the left Chip conveyor Work probe OMP-60 Tool probe TS-27 R Machine Weight: 22500 kg Machine in good condition, fully functional Find more here - / Contact us at -

A Hiller two-phase centrifuge for solid-liquid separation and dewatering is available. Drum speed: 2700rpm, max. operating speed: 2650rpm, max. feed material density: 1.3kg/dm³, drum inner diameter: 752mm, drum wall thickness: 20mm, drum material: 1.4470, max. operating temperature: 50°C, max. operating pressure: 0bar, motor power: 75kW. Machine dimensions X/Y/Z: approx. 5100mm/2300mm/1750mm, weight: approx. 11600kg. Documentation available. An on-site inspection is possible. Image is an example.

Linear drive, linear gear, lifting gear, spindle drive, rodless pneumatic cylinder -Manufacturer: Hoerbiger ORIGA, rodless pneumatic cylinder -Type: EU/4200-040-01000- -Stroke: 1000 mm -Drive: pneumatic -Price: per piece -Number: 2 piece -Dimensions: 1300/70/H100 mm -Weight. 7.7 kg/piece

material width: 0400 mm coil weight: 1,50 t material thickness: mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm range of expansion ca.: 460 - 530 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Servo motor, electric motor, DC motor, pitch motor, pitch drive, rotary encoder, tachometer, encoder -Manufacturer: RUCKh -Type: Pitch GH 112/4XL -SAP Senvion: 48586 -Power: 4.5 kW -Max. Speed: 1450 rpm -Voltage: 288 V -Brake: 100 Nm -Construction: B5 -Tachometer -Shaft: Ø 28 x 60 mm -Number: 2x motors available -Price: per piece -Dimensions: 800/380/H270 mm -Weight: 87 kg

Key data: 900 KW, 400 V

2 x Excellent condition Jenbacher 412 natural gas generator sets from a cancelled project. Equipment is ready for immediate delivery. HZ: 50 Fuel: Natural Gas Scope of supply: Engine, Alternator, Base Frame, Control panel, Gas Line, and boxes of ancillaries as delivered by Jenbacher as part of factory scope of supply. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

High-speed camera, -Handover: in its current condition as inspected -Part: unchecked from stock -Manufacturer: Kodak, EKTAPRO HS Motion Analyzer Model 4540 -Voltage: 200-240 V -Individual components: see photos for technical data -Transport container: incl. -Transport dimensions: 1200/800/H570 mm Total weight: 84 kg

Frequency converter, pulse converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Siemens -Type: SIMOVERT-P 6SE 1110-4AA02 -Input: D380/415 V 50 Hz -Output: D15-380/415 V 2-200 Hz -Power: 10 kVA -Quantity: 1 piece available -Dimensions: 305/305/H715mm -Weight: 35kg

B&A REF: 8838 TON: 820 SCREW DIAMETER: 93MM SHOT WEIGHT: 2555 STROKE VOLUME: 2777CM3 INJECTION PRESSURE: 1478AR PLATEN SIZES: 1730 X 1560MM DBTB: 1250 X 1060MM MIN MOULD HEIGHT: 350MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1150MM MAX DAYLIGHT: 2250MM EJECTOR STROKE: 350MM CONTROLS: SEF 2000 CORE PULLING: 3 AIR VALVES: 2 MOTOR: 93 HEATING CAPACITY: 41KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

Separating clutch, controllable gear motor, variable speed gear motor, electric motor -Rapid traverse: for lathe Gearbox manufacturer: SITI type MI 60 FP -Motor manufacturer: MEZ type 4AP71-4 -Motor power: 0.37 kW -Speed range: 1-100 rpm -with control: -Brake and clutch: 24 V -Drive shaft: Ø 28 mm -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 510/400/H270 mm -Weight: 35 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor on: wheels -Roll diameter: 60 mm -Roll distance: 160 mm -Roll width: 400 mm -Roll height: 290 mm -Transport length: 800 mm -Dimensions: 1120/580/H340 mm -Weight: 42 kg -Total height of roller conveyor: approx. 285 mm -Transport dimensions: 1990/1015/H285 mm -Weight: 130 kg

A take-up winding machine Sahm for parallel winding is available, traverse width range: 10mm-300mm, max. spool diameter: 400mm, wound material: monofil, max. tape width: 30mm, max. yarn speed: 600m/min, max. winding width: 310mm, max. spool weight: 20kg, tension force range: 10cN-1250cN, winding heads: 90, documentation available, on-site inspection is possible.

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles: are not used -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 455 mm -Total length: 630 mm -Number: 16x spindles available -Price: per piece -Weight: 6.3 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 405 mm -Total length: 580 mm -Number: 17x spindles available -Price: per piece -Weight: 5.9 kg

A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.

Roller conveyor, conveyor track, roller conveyor belt, roller conveyor, -Ideal for: band saw, cold circular saw, ... -Execution: difficult -not powered -Roll width: 410 mm -Transport length: 2000 mm -Roles: Ø 48 mm -Roll distance: 390 mm -Total height of roller conveyor: 660 mm adjustable -Transport dimensions: 2000/680/H660 mm -Weight: 214 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Quantity: a 2nd plate is still available ID21154 -Clamping plate with: a carriage with clamping device -Car dimensions: 1450/810/H1120 mm -Weight: 490 kg -Width: 1465 mm -Length: 4930 mm -Working height: 850 mm -Plate thickness: 35 mm -Plate height: 300 mm -Plate with: support ribs -Groove width: 52 mm -Groove spacing: 292 mm -Transport dimensions: 4930/1670/H850 mm -Weight: 5900 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Quantity: a 2nd plate is still available ID21153 -Width: 1465 mm -Length: 4930 mm -Working height: 860 mm -Plate thickness: 35 mm -Plate height: 315 mm -Plate with: support ribs -Groove width: 51 mm -Groove spacing: 292 mm -Transport dimensions: 4930/1640/H860 mm -Weight: 6155 kg

Roller conveyor, conveyor belt, roller track, accumulation roller conveyor -Roller width: 440 mm -Conveyor length: 2100 mm -Roller diameter: 50 mm -Axle spacing: mm -Height: 200 mm -Roller conveyor: driven -Geared motor: 24 volts -Speed: 20 m/min -Quantity: 1x roller conveyor available -compatible with: ID19856 -Dimensions: 2100/510/H200 mm -Weight: 72 kg

Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.

centre height: 200 mm centre distance: 1.000 mm spindle turning speed range: 1600 U/min spindle bore: 42 mm turning length: 1600 mm turning diameter over bed: 410 mm : 230 mm machine weight ab.: 1.700 kg dimensions: 2000 × 1000 × 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

radial fan, dust extraction blower, fan, extraction, dust blower -Engine power: 3.6 kW -Speed: 1440 rpm -Volume flow rate: m³/h -Inlet connection: Ø 450 mm -Outlet connection: Ø 450 mm -Impeller: Ø 670 mm -Quantity: 1 available -Dimensions: 1200/1100/H1350 mm -Weight: 242 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate: for hydraulic press, eccentric press, injection molding machine -with groove for centering -Width: 300 mm -Length: 400 mm -Height: 36 mm -Milled from 2 sides -Drawing with the photos -Weight: 32 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type no.: 4205 1021/1 -Display range: 0 V - 40 V -Installation dimensions: LxWxD approx. 140x140x90 mm -Dimensions: 144/144/H90 mm -Weight: 1.2 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-35-400-PPV -Piston: Ø 35 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 65/58/H555 mm -Weight: 2.45 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-50-400-PPV -Piston: Ø 50 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Quantity: 1 available -Price: per piece -Dimensions: 70/70/H576 mm -Weight: 4.65 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 450 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 675 mm -Total length extended: 1125 mm -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 52/H675 mm -Weight: 4.8 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-80-400-PPV -Piston: Ø 80 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 97/97/H675 mm -Weight: 8.3 kg

- Universal milling machine with toolmaker precision  - Small-batch production to complex workpieces - Vertical milling head with hydraulic tool clamping Y and Z Milling - Handwheel in all three axes - Linear guideways in all three axes - Workspace guard retractable with large chip shield - Main motor with spindle brake  -  

Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm -Weight: 87 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-32-400-PPV-A -Piston: Ø 32 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -for: proximity switch -Number: 1x available -Price: per piece -Dimensions: 45/45/H545 mm -Weight: 1.7 kg

- Universal milling machine with toolmaker precision  - Small-batch production to complex workpieces - Vertical milling head with hydraulic tool clamping Y and Z Milling - Handwheel in all three axes - Linear guideways in all three axes - Workspace guard retractable with large chip shield - Main motor with spindle brake  -  

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display -for: turning and milling machines -Manufacturer: Heidenhain -Type: AE LS 477 -Dimensions: 47/175/H28 mm -Weight: 0.31 kg

Gear motor, electric motor, electric gear motor -Electric motor: for gearbox -for gear motor type: CB59-80K/4DBRF -Speed: 1380 rpm -Power: 0.55 kW -Worm shaft: Ø 20 mm -Construction: B5 -Protection class: IP 54 -Brake -Price: per piece -Number: 1x available -Dimensions: 345/210/H160 mm -Weight: 13 kg

turning diameter: 480 mm turning length: 800 mm control: System TX8F turning diameter over slide: 240 mm spindle passage: 65 mm chuck diameter: 200 mm turning speeds: 4000 U/min power capacity: 30 kW total power requirement: kW weight of the machine ca.: 4,3 t dimensions of the machine ca.: m powered tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Surface: scraped -Material: cast -Dimensions measuring chimney: 450 x 450 x 3005 mm -Wall thickness: 30/80 mm -Holes: Ø 52 mm -Dimensions base plate: 1080 x 1080 mm -Transport dimensions box one: 3310/645/H770 mm -Transport dimensions box two: 1160/1080/H350 mm -Weight: 1190 kg

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -for: machine tools and systems -Construction height: 168 mm -Load: 10-16 KN -Number: 2 pieces -Price: complete -Dimensions piece: 340/340/H168 mm -Weight complete: 50 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.75 kW -Speed range: 12.5 to 125 rpm -Motor: adjustable -Construction: B3 -Diameter shaft: 20 mm -Height shaft axis: 80 mm -Number: 1x available -Dimensions: 475/260/H220 mm -Weight: 40 kg