vertical turning 4 used for sale

The machine is in good technical condition, after prior agreement it is possible to test it. CONTROL SYSTEM Control language - completely in Czech 3D simulation - yes Programming type - Dialogue and NC TABLE Table dimensions - 1,270 x 610 mm T-slots - 5 x 18 mm Max. table load - 1,350 kg Distance between the spindle face and the table - 150 - 760 mm TRAVELS X-axis - 1,070 mm Y-axis - 610 mm Z-axis - 610 mm SPINDLE Max. spindle speed - 12,000 rpm Spindle taper - SK40 TOOL MAGAZINE Number of tools - 24 Max. tool diameter - 80 mm Max. tool weight - 7 kg

Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible.

X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible.

This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine.

This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information.

This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Okuma ACE CENTER MF-46VA was manufactured in 2006. It features an X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 15,000 rpm and an automatic tool changer with 32 stations. If you are looking to get high-quality machining capabilities, consider the Okuma ACE CENTER MF-46VA vertical machining centre we have for sale. Contact us for further details.

This 5-axis Kitamura Mycenter-4XT was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 610 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 15,000 rpm and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter-4XT vertical machining centre we have for sale. Contact us for further details.

This 4-axis HAAS VF-4SS was manufactured in 2019. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and includes a chip conveyor, coolant filtration system, and a 4th axis drive. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details.

Control Fanuc OM Travel distances X/Y/Z: 450 x 300 x 400 mm Table size 600 x 300 mm Spindle speed 8,000 min-1 Tool magazine for 16 Wkzg. SK 30

This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm.

This 3-axis HAAS VF-9/40HE vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 2,134 mm, Y-axis travel of 1,016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 2,134 × 914 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-9/40HE machine we have for sale. Contact us for further details.

Key data: 700 mm, 400 mm, 330 mm

Manufacturer. FANUC Model: Robodrill 4AX Year: 2008 Condition: Used Stock number: 9359 Number of axes: 4 pieces Maximum vertical spindle speed: 24000 1/min X-axis travel: 700 mm Y-axis travel: 400 mm Travel travel Z-axis: 330 mm Workpiece diameter: 300 mm Machine weight: 2100 kg

DELTA LC 400 / Rotary Table - Surface Grinding Machine -Magnetic clamping plate (turntable) 400mm -Max. grinding diameter 400mm -Grinding height (distance table - grinding wheel) approx. 220mm -Grinding wheel dimension / standard / 200x80x78mm -Speed / grinding spindle 2840 rpm -Fine adjustment 0.01mm -Distance / column - Grinding wheel axle 315mm -Spindle motor / 3KW -Side grinding wheel puller -Machine enclosure -Coolant device Dimensions : LxWxH 1.2x0.8x1.8 meters / Weight 700Kg

Key data: 600 mm, 500 mm, 450 mm

Manufacturer: Mikron Model UME 600 TNC 360/4xx Year 1996 Condition Used Stock number 9378 Maximum vertical spindle speed: 5000 1/min X-axis travel: 600 mm Y-axis travel: 500 mm Travel Z axis: 450 mm Machine height: 2000 mm Machine length: 2200 mm Machine width: 2800 mm Machine weight: 3550 kg

cutting diameter: 450 mm saw band length: 4150 x 34 x 1.1 mm capacity 90 degrees: flat: 450 x 480 mm capacity 45 degrees: flat: LI 450 x 310 mm capacity 45 degrees: flat: RE 450 x 290 mm band speed: 35 + 70 m/min work height max.: 930 mm total power requirement: 2.35 kW voltage: 400 V weight: 950 kg range L-W-H: 2150 x 1150 x 2115 mm well-maintained condition () current new price incl. accessories ~ 50.000 Euro special price on request Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - electro-hydraulic mitre adjustment left right Only the saw frame swivels, everything else remains fixed incl. ELGO digital value display - electro-hydraulic material clamping - electro-hydraulic infeed from the saw frame Infinitely adjustable (cutting pressure control) - Operating instructions Special accessories inc ...

Muller Machines SA 480 V ist ein Vertikal Bearbeitungszenter für präzise Bearbeitungen, hohe Genauigkeit und Zuverlässigkeit. Tisch 650x410 mm, 3 T-Nuten (14 mm breit, 125 mm Abstand), max. Werkstückgewicht 280 kg; Abstand Spindelnase–Tisch 130–580 mm. Spindel 0–12.000 U/min stufenlos, Spindelleistung 11 kW, Eilgang 36 m/min. Vorbereitung für 4. Achse, Kühlmittel-Spänespülung, Ausblaseinrichtung der Frässpindel, automatische Zentralschmierung, Zustandsleuchte. Erreicht enge Toleranzen; typisch eingesetzt in Automotive, Luftfahrt, Medizintechnik, Uhrmacherei und Maschinenbau. Technische Daten ohne Gewähr

WILLEMIN MACODEL W 401 PA ist ein Vertikal Bearbeitungszenter, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Längsweg 250 mm, Querweg 200 mm, Vertikalweg 300 mm; 16 Werkzeuge; Werkzeugaufnahme ISO 25. Horizontale Spindeldrehzahlen 50–12000 rpm (6000 angegeben), 4-stufig; Vertikalspindel 50–6000 rpm, 8-stufig; Eilgang Längs/Quer 20 m/min, Vertikal 10 m/min; Gesamtleistung 10 kW; Gewicht ~1500 kg; Abmessungen L1400×B1800×H2300 mm. Ermöglicht enge Toleranzen; Einsatz z.B. Uhrenindustrie, Automotive, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

WILLEMIN MACODEL W 401 PA ist ein Vertikal Bearbeitungszenter hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit. Längsweg 250 mm, Querweg 200 mm, Vertikalweg 300 mm; 16 Werkzeuge; Werkzeugaufnahme ISO 25. Horizontalspindel 50–12.000 (6.000) t/min; Vertikalspindel 50–6.000 t/min. Eilgang: Längs 20 m/min, Quer 20 m/min, Vertikal 10 m/min. Gesamtleistungsbedarf 10 kW. Abmessungen L1400 x B1800 x H2300 mm; Gewicht ca. 1.500 kg. Ermöglicht enge Toleranzen; eingesetzt in Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Manufacturer: DOOSAN Model: DNM 400 A Year: 2011 Condition: Used Stock number: 9438 Control system: FANUC Work table length: 920 mm Work table width: 435 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm Machine height: 2509 mm Machine length: 2093 mm Machine width: 1962 mm Machine weight: 5000 kg

Kläger VBS 405 S Vertikalbandsäge / Metallbandsäge Hersteller: Kläger Typ: VBS 405 S Zustand: gebraucht, sehr gut Baujahr: 2006 Schnittbreite: 400 Tischneigung rechts/links 45°/15° Tischgröße 607 x 607 mm Sägebandbreite: 3-20 mm Sägebandlänge: 3300-3400 mm Bandgeschwindigkeit: 15 ? 300 M/min. Länge: 1120 mm Breite: 740 mm Höhe: 1930 mm Gewicht: 510kg ? Ideal Sägebandschweißgerät ? Original Dokumentation ? Maschinenfüße

The machine is in good technical condition; testing is possible by prior arrangement. X-axis travel: 850 mm; Y-axis travel: 700 mm; Z-axis travel: 500 mm. Table dimensions (LxW): 10; load capacity: 2000 kg. Rapid traverse (XYZ/BC): 35 m/min. Spindle head: HSK-A63; speed: 0–18,000 rpm; spindle motor power: 20 kW. Tool positions: 38. Control system: Heidenhain TNC 640. Air through spindle. Heidenhain TS460 touch probe. Electronic handwheel. Approx. 20 HSK-A63 tool holders (in the changer). Manual cabin roof. Preparation for mist extraction system. Wash-down gun. Original HERMLE + Heidenhain documentation.

x-travel:800 mm y-travel:410 mm z-travel:510 mm control:Fanuc 10 MA rapid travel x/y/z:20/20/15 mm/min table surface area:1100 x 450 mm tool taper:BT 40 tool magazin::30 BT 40 max. tool length:250 mm max. tool weight:8 kg power requirement:7,5/5,5 kW turning speed range:6000 1/min weight of the machine ca.:6,3 t Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup"

Type: 9.3-456, Y.O.M.: 1991, inlet: 400 mm x 400 mm, overhauled, without motor.

Creo Lotem 400 Manufacturer: Creo Model: Lotem 400 Year: 2005 4-page format Plate min.: 381 x 318 mm Plate max.: 750 x 622 mm F Speed: 15 plates/hour fiber head 24 diodes, 830nm Resolution :up to 3556 dpi ,Platewinding 37800 Bacher Control 2000 Punch Workflow ,Creo Prinergy Evo

Spinner for Agfa Avantra 44S ,20,000 RPM, refurbihed 2013, with warranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us.

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

Composite plant Fabrikat Linde,with 3 pcs.Bitzer compressor type.4EC 4.2Y 22.7m3/h. 40Kw.at minus 10 degrees evaporation temperature.

Cylinder head F/BFL912/913 Net= 165,- Cylinder head FL812W Net= 345,- Cylinder head FL812D Net= 345,- Cylinder head FL712 Net= 345,- Cylinder head FL612 Net= 395,- (all cylinder heads kpl.with valves ready for replacement available) Piston+female 712/812 Net= 245,- Piston+female 912 Net= 100,- Head screws 912/913 Net= 15,- Head screws BFL913 Net= 15,- Head screws FL712/812 Net= 36,- Head seal kit F/BFL912/913 Net= 9,- Head seal kit FL712-812 Net= 25,- Nozzle insert FL912-913 Net= 30,- Nozzle insert BFL913 Net= 30,- Nozzle insert BFL913- P-nozzle Netto= 45,- all prices subject to change,price changes reserved per piece plus geseinfo@miw-zeven.dtzl.Tax email=

Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new

used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, capacity 75 liters, filter area 6.5 m2, pressure max. 10 bar, dimensions 2000 x 800 x 1600 mm, weight approx. 800 kg

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 409399-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tr ...

Deutz/Lombardini engines BF4M1013E,BF4L1011T,BF4M1008(LDW1204T),F4M1008(LDW1204) F3M1008(LDW903),BF4M2011,BF4M2012C all other types on request. Hatz Engine Exhaust Program:ES75/79/780/785/786/1D80/1D81 etc... Agents:Lombardini,Yanmar,Scania,Mitsubishi,Sisu-Diesel,Hatz,Kubota,Isu zu info@miw-zeven.de

Austausch-Motor Actros DB OM 501LA-430 PS generalüberholt auch ohne Altteilrückgabe,geben Aufpreis,zu verkaufen.1Jahr Garantie info@miw-zeven.de

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tra ...

We offer from stock zzügl. Packaging+Freight to: Timing belt 113 teeth a 42,-/piece Cylinder head LDW1204/1204T/1404 net 840,-/piece all prices to the tax mail= info@miw-zeven.de

1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.

Scania AT-Motor Type=DC12-60A Pump-Nozzle-Motor with EMS Control max.337KW at 1,800rpm > Fixed speed motor. Incl.Anlasser+alternator suitable for vegetable oil and palm oil. Immediately available from stock! Also suitable for vegetable oil operation. info@miw-zeven.de

3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms

Timing belt+clamping roller DEUTZ BF4L1011 (=OE 02929933) Net= 67,- Timing belt+clamping roller DEUTZ BF4L2011 (=OE 02931480) Net= 151,- Timing belt F/BF3-4M1008 Net= 50,- Clamping roller F/BF3-4M1008 Net= 76,- all price plus Shipping+VAT info@miw-zeven.de

Complete boiler system Kohlbach Year of construction - 1990 Power - 4000 kW For very wet chips incl. bark Water content - about 15000 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulically ash removal Cyclone for dust separation Electrostatic precipitator Complete controling system Well maintained, excellent condition

Attachment: Chamber filter press used Usage area: Chamber filter press, pilot plant Design: page Holm led Filter plate format: 400 x 400 mm Plate number: 15 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.0 m square Presses contents: approx. 37 dm3 PCB package length: 700 mm Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available.

1 x Werner & Pfleiderer 400mm dia dump extruder, Type: EAE400, Fabrik nr 221284, Werk nr 416295, Year: 1985, double hydraulic crammer feed, feed section 965mm wide, L/D ratio 8:1, with 235kW DC variable speed motor, Sheeting head to produce up to 1000mm wide sheet. Complete with controls and hydraulics etc.

REWA 470 / 27 Product no.: RE-HU-2015-0801-1 Equipment: refurbished dewatering equipment Type: Chamber filter press 470/27 with high pressure piston diaphragm Abel Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 27 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 10.1 m ² Presses contents: approx. 135 dm3 PCB package length: 1600 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Pumps: Abel piston diaphragm high pressure pump Accessories: depending on the type and customer Extra services: On this complex guarantee months between 6-12. Condition: The system is in good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility or to buy? Contact  ...

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

Material: steel Engine 11 kW Very good condition. You can also get the entire system with all components.

to the storage of custom water / fire-fighting water. the container is used, emptied inside and cleaned expertly. he owns a manhole DN 600 with cathedral lid, two angschweisste feet and will provide outside completely with a new bitumen painting. L = approx. 10.70 m / D = 2.50 m / weight approx. 9.0 to. / ex works, freely charged. for the use as a fire-fighting water tank konnen we the container completely equip with a fire brigade suction connection, consisting of: -1 Stck. Suction management with A-firm coupling to German Institute for Standardization 14319 with special fastener for Feuerwehr-Dreikantschluessel - 1 Stck. Bleeder tube with bonnet - 1 Stck. Bearing pipe with bearing stick for measurement of the filling state - 1 Stck. Cathedral lid with screws and poetry. the suction management can be used as a filling and withdrawal pipe. the components are prep ...

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.