vertical turning 4 used for sale

Rectifieuse par coordonnées CNC HAUSER S40-400 CARACTÉRISTIQUES TECHNIQUES: Course axe X : 650 [mm] Vitesse maxi. course axe X : 4000 [mm/min] Vitesse avances de travail axe X : 0 - 1800 [mm/min] Course axe Y : 450 [mm] Vitesse avances de travail axe Y : 0 - 1800 [mm/min] Course axe Z : 130 [mm] Vitesse mini. course axe Z : 0.5 [mm/min] Vitesse maxi. course axe Z : 12000 [mm/min] Fréquence course axe Z : max. 4 [Hz] Course axe W : 500 [mm] Vitesse axe C (planétaire) : 5 - 250 [rpm] Vitesse maxi. course axe W : 800 [mm/min] Course axe U (avance radiale) : 5.5 [mm] Distance entre colonnes : 750 [mm] Longueur table : 770 [mm] Largeur table : 630 [mm] Passage libre entre le moteur de meulage et la table : 585 [mm] Poids maxi. admissible sur la table : 500 [Kg] Tension d'alimentation : 400 [V] Poids : 4550 [Kg] INFORMATIONS COMPLÉMENTAIRES : x1 pack H ...

Rectifieuse par coordonnées CNC HAUSER S40 400 CARACTÉRISTIQUES TECHNIQUES : Course axe X : 650 [mm] Vitesse maxi. course axe X : 4000 [mm/min] Vitesse avances de travail axe X : 0 - 1800 [mm/min] Course axe Y : 450 [mm] Vitesse avances de travail axe Y : 0 - 1800 [mm/min] Course axe Z : 130 [mm] Vitesse mini. course axe Z : 0.5 [mm/min] Vitesse maxi. course axe Z : 12000 [mm/min] Fréquence course axe Z : max. 4 [Hz] Course axe W : 500 [mm] Vitesse axe C (planétaire) : 5 - 250 [rpm] Vitesse maxi. course axe W : 800 [mm/min] Course axe U (avance radiale) : 5.5 [mm] Distance entre colonnes : 750 [mm] Longueur table : 770 [mm] Csbn Ua Hjwu Dwpe Rwjrd Largeur table : 630 [mm] Passage libre entre le moteur de meulage et la table : 585 [mm] Poids maxi. admissible sur la table : 500 [Kg] Tension d'alimentation : 400 [V] Poids : 4550 [Kg] ÉQUIPEMENTS INCLU ...

Polyester fiber production line Polyester fiber production line, manufactured in 2008, put into operation in 2010. From the end of 2012 until the second half of 2019, fiber production was suspended. The productivity of the line is 10,000 tons of fiber per year. The possibility of producing fiber from primary raw materials - PET granules and from secondary raw materials - PET flakes (recycled PET bottles). The main default raw material (as cheaper) is PET flakes. The available spinneret can be used to produce solid fiber 3, 7 and 15 denier, and hollow fiber, 7 and 15 denier. Hollow fiber can be produced in the "conjugated" type. Can buy and use other denier spinnerete according needs. The main components of the line: Fiber extrusion line • Vacuum dryers, volume 8m3, heated with thermal oil, year of manufacture 2011 – 4 units. + In 2019 instaled, elevators and a screw conveyor for  ...

Stroke speed cut/return: 80m/min, feed cross support/long support: 27mm/stroke, table dimensions X/Y: 4000mm/1250mm, max. table load (table center): 2000kg, tool holder: planing steels with rectangular cross-section, tool dimensions X/Y: 50mm/50mm, bed length: 9400mm, planing length: 4500mm, planing width: 1520mm, planing height without/with cross support: 1310mm/1250mm, connected load: 64kVA. Total system dimensions X/Y/Z: approx. 10000mm/3300mm/2500mm, weight: approx. 26000kg, foundation weight: 60000kg. The machine was electrically re-equipped in 1986. Documentation available. On-site inspection is possible.

charge load: . : . diameter: . mm serial number: MP-70-3-4-98-A1 Job No.:: 4813 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

B&A REF: 9164 TON: 80 SCREW DIAMETER: 40MM SHOT WEIGHT: 208 STROKE VOLUME: 231CM3 INJECTION PRESSURE: 2025AR PLATEN SIZES: 590 X 580MM DBTB: 400 X 400MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 250MM EJECTOR STROKE: 150MM CONTROLS: NC4 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 11KW SCREW DRIVE: HYDRAULIC

A CNC fine milling machine Iselautomation KG with defective spindle is available. Travel X/Y: 400mm/200mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1600mm, weight: approx. 500kg. On-site inspection is possible.

Two identical Burkle curved belt conveyors are available. Effective width: 400mm, length: 1800mm, feed rate: 37m/min, curvature: 90°. Documentation available. On-site inspection is possible.

Sawblade tiltable: 0-45 ° Length of the rolling table: 3350 mm cutting width: 1100 mm Motor output: 5,5 kW Cutting height: 155 mm Cutting height at 45°: 110 mm Saw blade diameter: 450 mm Speed: 3000 | 3600 | 4200 U/min. weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T

Block size press Müro 4x5000A4 WT; cleaned and tested; 1xDryer; Stack increase. Block gluing machine Müro 4x5000/A4 WT; cleaned and checked; 1x dryer; pile elevation.

Knapp transfer roller conveyor Toothed belt slider 90° 2900/2270-510-450 RA2417 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 710 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller spacing: 90 mm Frame height: 90 mm Drive section height: +250 mm downwards Distance between belts: 330 mm Belt width: 250 mm Number of accumulation positions: 5 Accumulation position size: 700 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: nominal voltage: 24V, 380-500V Construction year: 2015 condition: Ausstellungsstück Conveyin ...

Inv. Num. : 8514 Type: CLX 450 TC Producer: DMG Created: 2022 Parameters: Switch-on hours: 13312 h Hours: 8547 h Maximum spindle speed: 5000 1/min X-axis travel: 750 mm Y-axis travel: 200 mm Travel Z axis: 1000 mm Max. workpiece diameter: 400 mm Maximum length of the workpiece: 1100 mm Machine weight: 9200 kg

Machine in standard version for automatic sharpening of straight knives in the planing head - Planer head diameter min. 85 mm to max. 225 mm - Tool length max. 330 mm (table stroke 440 mm) - Number of cutting edges arbitrary - Free angle infinitely adjustable 15° - 35° - Grinding spindle speed n=4,000 rpm. - Grinding wheel D=125 mm, bore d=20 mm - Grinding motor 1.1 KW, n=2,850 rpm. - Feed motor 0.053 KW, n=1,300 rpm - Grinding speed 650 mm/min. - Partial motor 0.033 KW, n=1,300 rpm. - Freely selectable grinding circuits per tool 1 - 5 - Coolant pump motor 0.065 KW, n=2,900 rpm. - Coolant / tank capacity approx. 115 litres - Mandrel (NEW) D=50 x 330 mm - Machine complete with accessories Machine dimensions: H=1200 mm, W=1,150 mm + D=820 mm / Weight approx. 450 KG Condition: Refurbished by qualified personnel, everything renewed and straightened, function tested, ...

Manufacturer: PRO-WAM Type of Machine : Process tank 450 L Year of Manufacture: 2019 Volume: 450 liters Tank used several times, like new, in very good condition, on wheels. Pressure up to 2 bar, with mixer and heating jacket, made of AISI 316Ti acid-resistant steel. Additionally, two UV light radiators were designed for the tank, mounted from the top through sight glasses. Process tank 450 l - vertical tank - pressure tank up to 2 bar - main tank made of AISI 316Ti acid-resistant steel - tank insulated with mineral wool, thickness 50 mm in the cylindrical part and on the lower head - outer jacket made of AISI 316Ti acid-resistant steel, thickness: 2mm - lower and upper cap pressed DIN 28011 - heating jacket with a capacity of 6 L - temperature in the tank and jacket 100 degrees. c - circulation pump - heating medium temperature sensor - expansion vessel of the heating system - ele ...

met 13 meter invoerrollenbaan met digitale uitlezing Dia saw / abrasive - disk : 400 mm Turningspeeds: 10/20 m/min Weight: 1250 kg

Heidolph Laborata 4001 complete with condenser and water bath, 0-270 rpm

Watercooled chiller/Heat pump CIAT LWHE 4628E0003- 1736 kW/ 1964 kW Cooling capacity: 1736 kW / 493.62 tons (12/7 — 30/35°C) Heating capacity: 1964 kW / 558.45 tons (40/45 —10/7°C) Year of manufacture: 2021 Options: Economizer. High efficiency. Heat pump. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Compressors: 2 pcs. Carlyle 06TVW819SW3D.A42 (screw compressor with stepless control between 15% and 100%) Type of refrigerant: R134a Dimensions: 4.83x2.13x1.6 m. Weight: 9850 kg. Working hours: 0/0 h. Condition: New

Injection moulding machine Arburg 470s 1100/290 YOC 2017 2 K

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Injection moulding machine Arburg 470C 1600/625 Bj 1995

Turning diameter: 320mm, turning length: 1000mm, spindle clearance: 80mm, speed: 3150rpm, travel X/Z: 265mm/1000mm. Machine dimensions X/Y/Z: approx. 5500mm/2400mm/2400mm, weight: approx. 7000kg, control: Traub System TX-8. Including a tool set, three-jaw chuck and bar chuck with collets. Documentation available. On-site inspection is possible.

Key data: 585 mm, 4064 mm

JARBE Universal Cylindrical Grinder Year: 1981 Technical Specifications & Features: • Swing Over Table: 23″ Distance between centers 160” • Hydraulic Table Traverse • Swiveling Table for Taper Grinding • Universal Workhead • Universal Wheelhead • Grinding Wheel Capacity: 20″ • Includes 2 Workrests • Equipped with Coolant System • Electrics: 440 Volt

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

CNC Univ. Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4Machine - Defect - without ControlMachine not ready for operation - electric without function - without CNC controlFabr. No: 03-02 Year of manufacture 19904 axes (X, Y, Z and R)Table clamping surface 1300 x 250 mmCenter width 700 mmCenter height 155 mmGrinding length (X-axis) max. 400 mmGrinding width (Y-axis) max. 260 mmGrinding spindle speed max. 6000 rpm. Grinding spindle drive 3 kWNet connection 380 Volt, 50 Hz, 25 Amp.- CNC control

4 pieces damping elements BILZMachine feet, oscillating elementsType Faebi 430 HDBeload 27500-65000 NBload 2750-6500 kgWorking height: 95 mmBase plate: 500 x 500 mm x 10 mmSupport diameter: 315 mmNominal diameter 480 mmAir pressure: max. 6 bar- Fastening thread M20 in the center of the damper- Damper with two-chamber systemvery good conditionIdeal for press, punching machine or punching nibbling machines.Weight per piece: 53 kggood condition; used

Hard rock slab, granite slab, granite blockHard stone block, angle block precisely machined on all sidesMeasuring cube, measuring plateLength: 1590 mmWidth: 300 mmHeight: 470 mm- 2 holes 80 mm- 2 holes 120 mm- Threaded bushings mainly M16, some with M12 and M18Weight: 570 kgGood condition; used

Conveyor belt, trough conveyor belt, trough conveyor presumably GASUS type FB 400 x 5500Belt conveyor, conveyor belt, belt conveyor Fabrig Nr: F-02071168 Year of construction 1996Working length: 5.5 metersBelt width: 400 mmDeflection pulley diameter: 225 mmDeflection pulley width: 450 mmBelt speed: approx. 30 meters/min. Motor power: 1.5 kWNerg connection: 400 volts, 50 Hz - Drive via tubular motor- Inlet hopper 600 x 400 mm- The support stations are 2-part troughed- Metal support rollers with maintenance-free ball bearings-

Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM Mega Pulse)Pulse Welding Machine with Inverter Welding Power SourceFabr. No. 065013 built in 1998Power 400 Amp. = 60% ED 320 Amp. = 100 % EDEinfinitely variable adjustment rangeMains connection 400 Volt, 50 Hz, 32 Amp. Plug - separate 4-roll wire feeder with connecting hose pack meter - Digital display for voltage and current- Pulse welding device with single and double pulses - 2-stroke and 4-stroke welding device - 4 meter Binzel hose pack with

Electric Forklift JUNGHEINRICH Type EFG-V20 MFGE115-450 DZFabr. No. 89.90.74.09 Year of construction approx. 2000Nominal load capacity 1900 kgLifting height 4500 mmFork length 1130 mmFork carriage width 980 mmOverall height 2000 mmOperating voltage 48 volt- triplex mast with full free lift 1400 mm- hydraulic sideshift battery from year of construction 2006 Type 6 EPZS 750 (48 Volt/ 750 Ah) - battery in poor condition- 4-wheel solid rubber - tires, front 200/50-10, rear rear 16x6-8- Hydr. Auxiliary steering- automatic charger Jungheinrich,

Conveyor belt, belt conveyor, belt conveyor MOVING (Sweden) Type BGL22-02-4000-800Order No: 4019584 year of construction 2004Effective length: 3900 mmBelt width: 800 mmBelt length: approx. 8100 mmOverall height frame profile: 120 mmDeflection pulley diameter: 105 mmBelt speed: approx. 10 m/min. Conveyor belt height: approx. 900 to 1300 mmMotor power: 0.25 kWNerg connection: 400 volts, 50 Hz.- Drive via ABB/ geared motor- Movable on 6 fixed castors with brake- Inclined position of the conveyor belt due to different heights of the 3 mobile footrests -

Conveyor belt, belt conveyor, belt conveyor, belt conveyor MTFMasch. No: Year of construction approx. 2015Effective length: 3200 mmBelt width: 490 mmBelt length: approx. 6550 mmFrame profile height: 47 mmPulley diameter: 30 mmBelt speed: 6 m/min. to 48 m/min. Conveyor belt height: approx. 960 to 1400 mmMotor power: 0.25 kWNet connection: 230 volts, 50 Hz.- infinitely variable belt speed via ABB frequency converter, type ACS150-03E-01A2-4- belt drive via RGM geared motor- belt body made of aluminium profile with stainless steel sheet metal cladding- 1

Z-conveyor, conveyor belt with metal link belt GÖSSLINGMetall belt conveyor, belt conveyor, floor conveyorMasch. No: 15867 Year of construction 2005Useful length: 3100 mmBelt width: 400 mmFrame profile height: 70 mmInsertion width: 465 mmInsertion length bottom: approx. 1500 mmLength conveyor belt slope: approx. 800 mmLength conveyor belt outlet top: approx. 600 mmHeight offset: approx. 170 mmBelt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mmInsertion height: approx. 1050 to 1270Motor power belt drive: approx. 0.37 kWNet connection 400

Key data: 4000 kN, 80 mm

Machine + Viper Robot 12

SPECIFICATIONS: Operation of the machine with rotating ring, diameter mm: 400 Installed power: 2.7 kW EQUIPMENT: 01 Roller conveyor for loading 01 Roller conveyor for unloading

turning diameter: 658 mm workpiece length - max.: 1519 mm control: Mazatrol Matrix 2 swing diameter: 658 mm clamping range for bar work: 102 mm workpiece weight: 1000 kg ------------ MAIN SPINDLE ------------: turning speeds: 35 - 3300 U/min passage of spindle: 112 mm c-axis: 0,0001 spindle motor: 30/22 kW spindle nose: A2-8 milling spindle: spindle motor: 22 / 15 kW milling head speed: 12000 U/min b-axis: -30 / +210 ° travel -x axis: 615 mm travel -y axis: 260 mm travel -z axis: 1585 mm rapid travel x/y/z: 50 / 40 / 50 m/min 2nd Spindle:: spindle turning speed range: 4000 U/min spindle motor: 26 / 22 kW spindle nose: A2-8 spindle passage: 91 mm w-axis: 1539 mm total power requirement: 108,53 kVA weight of the machine ca.: 18 t dimensions of the machine ca.: 5,2 x 2,8 x 2,75 m - CNC control Mazatrol Matrix 2 - Main & counter spindle - Milling spindle (Capto C6) - 36-position tool cha ...

A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible.

A CNC jig grinding machine Hauser is available. Weight: approx. 3000kg, control: ADCOS CNC 400, control option: ASS. Includes a coolant system and various accessories. An on-site inspection is possible.