vertical turning 4 used for sale

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 307 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 130/90/H120 mm -Weight: 3.4 kg

Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knives 4 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete -Dimensions: 330/300/H80 mm -Total weight: 5.6 kg

Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife 2 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete -Transport dimensions: 370/230/H40 mm -Weight: 2.8 kg

saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade 904-12 -Type: Ø 400x3.5/2.8x60 Z 72 = T 18.32 -Art. No.: 0211-5107670X HW -Speed: n max. 4300 rpm -Number: 3x saw blade available -Price: per piece -Dimensions box: 490/490/H10 mm -Weight: 3.2 kg/piece

Vacuum cleaner motor, radial blower for sweeper, radial blower, fan, blower -Manufacturer: SPAL, radial fan from sweeper Hako Hamster 500 E -Type: 008-B37/C-42D -Voltage: 24 V -Connection input: Ø 70 mm -Connection output: 100 x 45 mm -Dimensions: 150/120/H145 mm -Weight: 0.7 kg

Pökomat Steaker M 400-4, approx. 396 needles

Inv. Num. : 7711 Type: VM Multi 400-1 Producer: Schmalz Created: 2021 Parameters: Load capacity: 275 kg Weight: 75 kg

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Steel, crane chassis without drive -Beam width: adjustable, set to max. 130 mm -Load capacity: kg -Dimensions: see photos -Dimensions: 405/360/H350 mm -Weight: 43 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank Ø 460 x 5 mm -Inside: Ø: 50 mm -Bolt circle: Ø 100 x 18 mm -Number of teeth: 54, see photo -Weight: 5 kg

clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Clamping surface: 405 x 300 mm -Material: steel -Dimensions: see photo technical drawing -Dimensions: 405/300/H200 mm -Weight: 49 kg

clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, -Clamping plate: surface plate, marking plate -Size: 415 x 250 mm -Height: 60 mm -Dimensions: 415/250/H60 mm -Weight: 45 kg

test mandrel, tool holder, milling holder, milling tool -Manufacturer: Bahmüller, boring bar -Length: L= 158.406 mm -Radius: R= 19.937 mm -Recording: HSK50 -Dimensions: Ø 50 x 183 mm -Weight: 1.6 kg

sunroof, glass roof, car glass roof, tilting roof, pop-up sliding roof -Manufacturer: Monza, sunroof type Air Light 1 Ovp -Size: 780 x 410 mm -Dimensions box: 780/410/H55 mm -Weight: 5.3 kg

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Manufacturer: Würth, workshop trolley, sturdy tool trolley -12 drawers: lockable, see photos for layout -Dimensions total: 680/460/H1045 mm -Weight: 70 kg

for sale GIS Piston Compressor GS25/150/400/T Boiler capacity 150 litres Suction capacity 400 min./l Motor 3 HP, 400 V mobile Total weight approx. 80 kg Other models available, inquiry to FSA Maschinen AG

Key data: 400 KW, 570 kVA, 400 V

Dear Ladies and Gentlemen, We hereby offer the following a MAN CHP in a container for rent! Year of construction 2014 Starts: 757 Hours: 11448 BH. Electrical Power: 400KW Thermal power 445 KW Dimensioning: Thickness: 100/140 mm insulation Length: 10000 mm Width: 2800 mm Height: 3200 mm Paintwork: Moss Green Contents in the container: MAN gas engine with generator on substructure Central heating Heat exchanger Switchboard Gas control unit Static power supply Exhaust silencer inside Auxiliary silencer above the container Insertion loss 65dBA in 10m Data recording Gas blower Combimac blue 65mbar gas pressure Gas Flow Meter Gas vacuum monitor Return temperature increase Exhaust gas heat exchanger with bypass Gas warning system Wind Vane Guardian Flame detector 1000 l each of used and fresh oil tanks with pump and hose reel Intrigued  ...

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, immersion pump -Cooling water pump: coolant pump -Engine: Cantoni 3.0 kW -Immersion depth: 450 mm -Dimensions total: 500/340/H880 mm -Weight: 74 kg

Key data: 320 KW, 400 kVA, 400 V

Make Iveco - AEM Model: 400 kVa diesel generator set Year of manufacturing: 1997 Serial nr: 12-8040-0001 Working hours (on servicemeter): 39 Capacity (KvA) 400 Capacity (Kw) 320 Engine make Iveco Engine model 8281-SRI-26SE Fuel Diesel Alternator make AEM Alternator model SE 315 L4 Voltage 400 Frequency (Hz) 50 Rpm 1500 Amperes (A) 577 Dimensions LxWxH (mm) 3250 x 1500 x 2100 ( set ) Weight (Kg) ca 3400 Total quantity in stock 1 Country of origin Set assembled in Germany Comments Used but almost new condition with 39 hours only, complete with panel and 2000 ltr fuel Bowser

PART NUMBER: 7343 SPECIFICATIONS - max width of the workpiece 180mm - max height of the workpiece 120mm 4 spindles: 1) Horizontal bottom 180mm 4kW 2) vertical right 120mm 4kW 3) Vertical left 120mm 4kW 4) Horizontal top 180mm 5.5kw - spindle diameter 40mm - all heads adjustable up/down, right/left - pressure on the insertion - 6 leading, pulling, toothed shafts from the top, including 1 double - double lead-out, pulling, rubber shaft at the top - leading, pulling, toothed, wide, metal shaft at the bottom - Lead-out, pulling, metal, smooth shaft at the bottom - feed motor 2.2kW - feed on cardan shafts - Infinitely variable feed speed - Electric planing thickness setting - lifting motor 0.75kW - length of the introductory table 1580mm - extraction spigot diameter 4x120mm - dimensions length/width/height 3040x1500x1700mm - weight about 2800kg ADVANTAG ...

Robot Laser Welding and Cutting Cell / Laser cutting and welding cell Year of manufacture 2018 Wenige Arbeitsstunden / not many working hours Robot Fanuc M-710iC/70 Control CNC: Fanuc R-30iB) + MFP Payload / lifting max: 70 kg Repeatability: ± 0.04 mm Working range: 2050 mm IP54 Fiberlaser source: IPG Photonics Model YLS-4000-S2T-Y16 Power: 4kW Cooling system. Two outputs optical and permanent connections of welding and welding Laser Cutting Heads / Two outputs optical and permanent connections of welding and laser cutting heads. Source dimensions: 856 x 806 x 1206 mm; Weight / weight: 330 kg; Power supply: 400–460 V/3P + PE at 50–60 Hz; Operating current at: 4000 W and 400 VAC: 20 A Laserschneidekopf / laser cutting head: HIGHYAG BIMO-FSC Laserschweißkopf / laser welding head: IPG Photonics. FLWO-D30 Vertical Welding: Fronius 7000 Doppe ...

Centrifuge for lateral feeding of an extruder with flakes / scrap the centrifuge is equipped with a loading tank previous use was on a 100 mm extruder with a conveying capacity of approx. 330 kg for PET flakes at call

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 465 mm -Piston rod: Ø 40 mm -Holes: Ø 35 mm / distance retracted 795 mm -Dimensions: 860/86/H127 mm -Weight: 24.6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 424 mm -Piston rod: Ø 28 mm / M20 -Recordings: see photos -Dimensions: 660/155/H95 mm -Weight: 16.2 kg

Height 2100 mm Width 1300 mm Length 3000 mm Capacity 450 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Stirrer Type Z Type Agitators Product ejection Ejection via hydraulic tilting of the mixer bowl Loading Loading integrated into the machine Mixer Type Open Mixer Number of rollers Twin shaft

Stainless steel, round steel, warehouse liquidation, 1.4104, X14CrMoS17, D150x1057mm, , new -50% Special price This stainless steel comes from a stock liquidation of a certified production company, so we offer an absolute special price. We have other diameters with this quality in stock. Buy a larger quantity we will still accommodate you in price. D 150mm x 1057mm lg, 147 kg, peeled. Material: X14CrMoS17 Material number: 1.4104 Condition: peeled The material was analysed using a hand-held spectrometer and is available from us. Material certificate is not available. A heat-treatable, martensitic, stainless free-cutting steel with 17 % chromium and molybdenum addition, which is alloyed with sulphur to improve machinability. The higher sulphur content reduces corrosion resistance and toughness. Not for cold forming and joint welding. 6 month warranty according to our gen ...

MACC Metal Band Saw Special 411 CSO Aut. Lowering Section cap. round up to 300 mm 2 speeds 38 + 77 m/min. Motor 1.6 kW, 400 V incl. machine base Weight approx. 530 kg

electric motor, three-phase motor -Handover: in its current condition as inspected -Drive shaft: Damage, see photos Manufacturer: B

Press force max.:: 1600 kN heating plates:: 400 x 400 mm electrically heated:: -- °C heating power:: 9,92 kW piston stroke:: 400 mm no. of stages:: 1 Condition: Used, Specification: Press 400 x 400 mm, second-hand steel frame construction - Clamping force: 160 tonnes - pressure force: 1600 kN - Operating pressure: 300 bar - Closing: from bottom to top - Heating platens: 2 electric platens - Heating power: 4.96 kW/platen - Heating platen dimensions: 400 x 400 mm - Specific pressing pressure: 1000 N/cm² - Distance between the heating platens: 500 mm - Piston stroke: 400 mm - Piston diameter: 260 mm - AC motor power: 7.5 kW - Pneumatic protective cover in the front area, - lifting device - Sliding table - Approx. dimensions: 1,760 x 1,150 mm - System height approx.: 2,470 mm - Weight approx.: kg The data for this ad was cr ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 400 mm -Type: C1-40/25x400 TGL 10906 -Piston rod: Ø 25 mm -Dimensions: 545/100/H70 mm -Weight: 5.8 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: conveyor belt belt conveyor -Speed: 9 m/min -Belt width: 440 mm -Conveyor length: 1375 mm -Drive: 0.18 kW, see photo nameplate -Transport dimensions: 1780/530/H240 mm -Weight: 42 kg

2 x 0.6V per revolution per min. I max. 2 x 0.09A V max. 10000 revolutions per min.

Key data: 4050 mm, 10 mm, 1000 mm

brand new, with control SC100T Specifications: max. cutting length 4050 mm max. sheet thickness for ST 45 10 mm Cutting angle 0.5 - 3° degrees Cutting gap adjustment 0.05 - 1 mm Hold-down 23 Back gauge area 1000 mm Stroke rate 7 - 11 strokes Length of the angle stop 1000 mm Weight approx. 13,000 kg Standard equipment: - SC 100T control - Cutting length limitation - Motorized back gauge 1,000 mm - Electronic cutting gap adjustment - Cutting line lighting with wire - Electro-hydraulic cutting angle adjustment via 2 push buttons or CNC - Angle stop 1,000 mm with scale, T-slot and fold-down cam - Scissor table with square supports and roller support - Mobile foot pedal for easy and safe handling - Hydraulic and mechanical overload protection - Finger guard made of round steels with recessed grip - Light barriers and protective fences - Machine according to CE  ...

Distance between points: 760 mm, Max travel Z axis: 650 mm, Maximum length to be rectified: 430 mm, Ø max to be rectified: 250 mm, Height of points: 125 mm, Ø max. molar: 500 mm, Max travel X axis: 320 mm, cnc brand: FANUC, cnc model: 18i-T, Ø max. wheel: 400 mm, main motor power: 7.5 Kw, Z and X axis resolution: 0.1µmm, Distance between centers: 430 mm, Workpiece head cone: MORSE 5, Ø of the workpiece head hole: 38 mm, tailstock cone: MORSE 4, Accessories: FELSOMAT gantry loader with SIEMENS CNC; Refrigeration equipment with paper filter; Forkardt automatic mooring plate; automatic tailstock; Cooled grinding wheel shaft; Spare ball screw; MARPOSS Automatic Grinding Wheel Balancer and Gauge , Dimensions (length x width): 2500x2000 mm, Weight: 4700 Kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: conveyor belt belt conveyor -Speed: 9 m/min -Belt width: 440 mm -Conveyor length: 1135 mm -Drive: 0.18 kW, see photo nameplate -Transport dimensions: 1230/530/H240 mm -Weight: 34 kg

Specifications Maximum pressure: 6 tons Press force: 2.5 kg/cm² Bale size: 600x400x500 mm Bale weight: approx. 50 kg Power connection: 400V / 2.2 kW Year of Make: 1995 Productivity: approx. 3 bales/hour Shredder Cutting width: 5.8 mm Power connection: 380 V/ 4 kW Year of Make: 1994 Safety level: DIN 66399-1, 5.2 P-3 /O-2/T-2/E-2/

Control Manual Plus Turning diameter 260 mm Circumferential diameter 475 mm Center width 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 4-fold parachute holder Tailstock

Balancer, machine balancer, spring balancer, cable extension, weight compensator, reel -Manufacturer: Wampfler, spring balancer type 5X2.4 40801 -Load capacity: 1.8 - 4.5 kg -Cable extension: m -Number: 2x spring balancer available -Price: per piece -Dimensions: 260/230/85 mm -Own weight: 3.4 kg/piece

Radial Drilling GSP 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T

Tool holder, milling holder, milling tool, long milling arbor, attachment holder -Milling holder: SK40 holder 3 pieces -Type: 40x22x25x40 / 40x32x25x60 -Shaft: Ø 32 / 30 / 22 mm -Price/Delivery: complete -Transport dimensions: 220/180/H60 mm -Weight: 4.6 kg/total

Output infinitely variable up to 70 packs / min. with self-cleaning vacuum filter with automatic bag magazine with integrated clipping device with date printer completely stainless steel clad with TOUCH control

faceplate diameter: 400 mm total power requirement: kW weight of the machine ca.: 0,08 t dimensions of the machine ca.: m 1 pc. faceplate - diameter 400 mm bore 125 mm fastening 4 screws: 185 M 10 KK 160 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PLC control, PLC subrack -Manufacturer: Siemens, Simatic S7-400 module carrier UR1 -Type: 6ES7400-1TA01-0AA0 -centralized and decentralized: 18 slots -Dimensions: 485/290/H30 mm -Weight: 2.9 kg

PLC control, central module, RAM, CPU, central device, positioning module -Manufacturer: Siemens, SIMATIC S7-400 Positioning Module FM 451 -Type: 6ES7 451-3AL00-0AE0 -Quantity: 1 piece available -Dimensions: 215/50/H290 mm -Weight: 1.4 kg

faceplate diameter: 440 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. faceplate - diameter 440 mm bore 60 mm fastening: 4 pcs. screws dia. 173 mm / M 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: MIG/MAG welding machine Type PowerMAG MM 4200 W complies with the EU Eco-Design Regulation No 2019/1784 Connection voltage 3 x 400 volts Adjustment range 40 – 420 amps Duty cycle 60% ED at 420 amps 80% ED at 360 amps 100% ED at 325 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 32 Amps Dimensions L x W x H 900 x 400 x 650 mm Weight 110 kg Age 3 months Condition workshop tested, like new, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 1 can of non-stick spray 1 Piece Instruction Manual Warranty 24 months from the date of delivery List fa ...

PLC control, digital output, digital input -Manufacturer: Siemens, SIMATIC S7-400, digital input SM 421 -Type: 6ES7 421-1BL01-0AA0 -Number: 1x module available -Dimensions: 215/25/H290 mm -Weight: 0.8 kg

PLC control, digital output, digital input -Manufacturer: Siemens, SIMATIC S7-400, digital output SM 422 -Type: 6ES7 422-1BL00-0AA0 -Quantity: 1x module available -Dimensions: 215/25/H290 mm -Weight: 0.8 kg

FOSHAN LX-425 metal circular sawing machine was built in 2019 by the Chinese company Foshan Nanhai Longxin Machinery Co., Ltd. The machine designed for precision cutting of workpieces at a fixed angle of 90° performs the machining process (from loading to the workpiece cutting itself) fully automatically, thanks to the provision of a bar feeder with magazine. The machined workpieces have a smooth surface without any burrs or distortions. In addition, the ability to cut more than one piece of material (bundle) makes the FOSHAN sawing machine an excellent choice for mass production. To this date, the FOSHAN LX 425 circular sawing machine has cut bundles of 4 brass tube profiles into suitable lengths. Technical specifications of the FOSHAN LX-425 tube cutting machine - cutting angle: 90° - cutting disc diameter: 300 mm - cutting disc bore: 32 mm - cutting disc rotational speed: 42- ...

MACC Aluminium Circular Saw TA 400 TCT circular saw blade 400 mm Section cap. up to 140 mm round Coolant pump Attack Speed 3000 rpm Motor 2.2 kW, 400 V incl. machine base Weight approx. 160 kg

PLC controller, central assembly, RAM, CPU, central processing unit, central device -Manufacturer: Siemens, SIMATIC S7-400, CPU 414-2 WORK MEMORY -Type: 6ES7 414-2XG03-0AB0 -CPU: CPU 412-2 -Dimensions: 215/25/H290 mm -Weight: 1.0 kg