vertical turning 4 used for sale

PLC control, connection module for digital electronic modules -Manufacturer: Siemens -Type: Simatic 6ES7 194-4CA00-0AA0 -Number: 1x available -Price: per piece -Dimensions: 140/70/H70 mm -Weight: 0.35 kg

Manufacturer: CFS (GEA) Type: Compact 420 YOM: 2010 El. specs: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 YOM: 2010 includes 4 format sets Vacuum Pump: BUSCH R5 Includes ESPERA outfeed conveyor Condition: very good

PLC control, connection module for digital electronic modules -Manufacturer: Siemens -Type: Simatic S7 6ES7 194-4CB00-0AA0 -Number: 1x available -Price: per piece -Dimensions: 140/70/H70 mm -Weight: 0.35 kg

Solenoid valve, pressure reducer, pressure regulator -Manufacturer: Wabco -Type: 4721950047 -Connection thread: M22x1.5 -Price: per piece -Quantity: 1 available -Weight: 0.7 kg/piece

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Commonrail Pump Used from experimental setup. Few hours

clamping force: 1300 kN injection volume: -- cm³ screw diameter: 45 mm platen size: 470 x 470 mm Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical pr ...

V-belt pulley, belt pulley -Diameter: 460 mm -Total width: 265 mm -Straps: 10 -V-belt width: 22 mm -Take: Ø 160 mm -Number: 1x pulleys available -Price: per piece -Weight: 78 kg -other pulleys in stock

For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg

Used 250 L dough mixer by Diosna type W 402 A with three tanks. The machine has one speed.

V-belt pulley, belt pulley -Diameter: 450 mm -Total width: 130 mm -Straps: 6 -V-belt width: 17 mm -Take: Ø 90 mm -Pulley: balanced -Weight: 48 kg -other pulleys in stock

V-belt pulley, belt pulley -Diameter: 480 mm -Total width: 240 mm -Straps: 9 -V-belt width: 22 mm -Socket: Ø 124 mm -Pulley: balanced -Weight: 95 kg -other pulleys in stock

V-belt pulley, pulley -Diameter: 460 mm -Overall width: 278 mm -Belts: 10 -V-belt width: 22 mm -Hole: Ø 95 mm -Pulley: balanced -Weight: 144 kg -other pulleys in stock

Electric motor, three-phase motor with 2 speeds -Power: 1.6/5.5 kW -Speed: 1445/2880 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: -pole changing -Number: 1x available -Price: per piece -Dimensions: 410/350/H300 mm -Weight: 48 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: mm -Dimensions: 60 x 120 mm -Length: 415 mm -Weight: 10 kg

Inv. Num. : 7155 Type: UR4-4DD-UF6 Producer: HMP Created: 2000 Parameters: Max. diameter: 25 mm Components: Reducing hammers with 4 segments 6-segment roll forming hammers

Geared motor, electric motor, three-phase motor -Speed: 12 rpm -Power: 1.1 kW -Design: B3 angle -Hollow shaft diameter: Ø 35 mm (shaft Ø 35 mm) -Dimensions: 510/220/H300 mm -Weight: 33 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 3 kW -Speed: 1440 rpm -Shaft: Ø 22 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 530/330/H260 mm -Weight: 51 kg

Key data: 1100 , 40

Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8

Key data: 1300 , 40

Screw diameter: 40 mm Injectable volume: 182 mm Injection pressure: 2120 mm Passage between columns: 420 x 420 mm Opening stroke: 500 mm Core: 1 Blower: Robot Interface

Gear motor, electric motor, electric gear motor -Speed: 132 rpm -Power: 0.37 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 455/230/H220 mm -Weight: 30 kg

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Fan, fan, electric motor, blower -Speed: 1360 rpm -Fan diameter: 500 mm -Hole circle: 540 mm/holes Ø 9mm -Quantity: 1x fans available -Dimensions: 565/565/H170 mm -Weight: 14kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 295 mm -Length: 496 mm -Height: 95 mm -Plate thickness: 30 mm -with: support ribs -Weight: 30 kg

Gear motor, electric motor, three-phase motor -Fan cover: defective -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 5x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Permissible operating overpressure: 6.0 bar Permissible flow temperature: 120 C Permissible boiler power: 400 kW Heating output: 444 kW Content: 380 liter Burner: Weishaupt RGL 3/1 - E Year: 1994 Fuel: Heating oil EL and natural gas Subject to prior sale - errors possible Internal Reference Number: D-1176

Gear motor, electric motor, three-phase motor -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Short taper: 6 -Flange: Ø 106 mm -Hole circle: Ø 135 mm -Through hole: Ø mm -Weight: 65 kg

Heating- and drying oven for temperatures from +20°C up to 300°C. Special turnstile drive for 1L bulkhead jars, TwinDISPLAY. Max. loading of chamber: 300 kg.

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outer: Ø 403 mm -Width: 15 mm -Price: per piece -Number: 1x available -Weight: 3.6 kg

RECON Part Number: 1.60.6-26.60.01-06 Kolbenschmidt 1. Ring groove: 0.75mm ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Grinding wheel, cup wheel, double grinding stand, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outside: Ø 400 mm -Width: 10mm -Price per piece -Quantity: 1x piece available -Weight: 2kg

Recon Catalog number: 1.2510 (1.64.6-25.10.01-04A) Sanded to 1 level undersize ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. filling: 300 kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 Volt Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. Loading: 300 Kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 V

Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: Ø 400 mm -Width: 10 mm -Quantity: 1 available -Weight: 2.2 kg

Three-phase motor, electric motor -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/420/H340 mm -Weight: 124 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Transport roller width: 430 mm -Admission: 2-sided 15 mm -Number: 3 rolls available -Price: per piece -Weight: 4.7 kg

Electric motor, three-phase motor -Power: 5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 530/370/H280 mm -Weight: 80 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 3.5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 470/350/H300 mm -Weight: 62 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Disc sander, disc grinder, disc sander, edge sander, edge grinder -Drive: 2.2 kW 3000 rpm -Plate diameter: 420 mm -Table size: 50 x 420 mm -Dimensions: 1000/600/H1150 mm -Weight: 210 kg

Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 102 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 74 kg

max. wheel diameter: 420 mm gear width: 120 mm max. module: 8 min. module: 0,5 control: BWO CNC no. of strokes: 32-800 Hub/min total power requirement: 50 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,3 x 3,9 x 3,4 m Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 80 rpm -Power: 0.14 kW -Construction: B3 -Diameter shaft: Ø 7 mm -Protection: IP -Number: 1x engine available -Price: per piece -Weight: 4.5 kg

Centrifugal water pump -Conveying capacity: 2.9 m³/h -Max. H: 26 mws -Motor power: 3 kW -Speed: 2900 rpm -Pipe connection inlet: DN 63 -Pipe connection outlet: DN 40 -Weight: 45 kg

Three-phase motor, electric motor -Power: 0.18/0.25 kW -Speed: 1370/2750 rpm -Shaft: Ø 11 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 210/175/H120 mm -Weight: 4.8 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 8.3 rpm -Power: 0.25 kW -Diameter shaft: Ø 40 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 700/210/H300 mm -Weight: 41 kg

- Model: F 385.41 - 4 cartons of 3 x 2 bottles per operation - Boxes : many different sizes - Full carton control: With bottle counter system - With bottles of single-breasted MASPACK 110/14/RED (2006) for pressureless lining of bottles - Machine in perfect condition