vertical turning 4 used for sale

Fast charger Voltage 230 V, max charging power 1,200 W, output 12-24V, maximum start power 8 kW, never used Overall dimensions: 700 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-45834-188

Fast charge charger Voltage 230 V, max charging power 1,200 W, output 12-24V, maximum start power 8 kW, never used Overall dimensions: 700 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-45834-104

Cordless impact wrench MAKITA DDF 459, max. 13 mm, 1 battery 18V/5.0Ah

Cordless impact wrench MAKITA DDF 459, 1 battery 18V/5.0 Ah, no charger, no accessories

serial number 117310074 Auction-ID: A7-46062-8

Cardboard boxes 1,200 x 300 x 400 mm and 1,200 x 300 x 200 mm each approx. 150 pieces on a pallet

With 2x roller conveyor dimensions 3000x470x870 mm Auction-ID: A1-43429-93

40kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-12

9400 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, DVI, SDI, DIGITAL LINK; electrical connection: 100-240 V - 50/60 Hz; Color: Black Auction-ID: A7-46311-10

9400 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, DVI, SDI, DIGITAL LINK; electrical connection: 100-240 V - 50/60 Hz; Color: Black; Dimensions of transport box: 100x80x57 cm (L/W/H), total weight: 87 kg Auction-ID: A7-46311-11

Universal Tool Milling Machine Manufacturer: AVIA S.A., Poland Type / Model: FNE 40 P Year of Make: 2013 Serial Number: 90567 Accessories / Scope of Delivery • Machine Vise • Tool Holders SK40 • Various Milling Tools and Clamping Devices • Documentation / Documents   Dimensions (L × W × H): approx. 195 × 220 × 220 cm Weight: approx. 1,900 kg Table / clamping surface: • Clamping surface: approx. 800 × 400 mm • T-slot table • Max. table load: approx. 400 kg Travel paths / machining range: • X-axis: approx. 620 mm • Y-axis: approx. 420 mm • Z-axis: approx. 400 mm Spindle: • Spindle holder: SK 40 (DIN 69871) • Max. spindle speed: 4,000 rpm • Speed range: approx. 50 – 4,000 rpm, infinitely variable • Max. tool diameter: 125 mm • Max. tool weight: 6 kg Feeds: • Stepless feeds in X / Y / Z • Working feed up to approx. 2,000 mm/min • Rapi ...

\" Adjustment / length measurement set – steel – 200–400 mm – in a wooden case Adjustment / length measures made of steel, stored in a sturdy wooden box. • Type: Adjustment dimensions / length dimensions / parallel dimensions • Material: steel • Quantity: 4 pieces • Lengths: • 200 mm • 250 mm • 300 mm • 400 mm • Holes: available (easy handling)\" Auction-ID: A7-46417-156

\" Lot of 6 pieces – Gauge size 400 mm + 3 Gauge holders + Accessories Part of the lot: • 1 × Gauge 400 mm (in a wooden box, Made in China) • 1 × Gauge Gauge 400 mm • 1 × Gauge Gauge 300 mm • 1 × Gauge Gauge 50 mm • 2 × Accessories/Clamping Elements \" Auction-ID: A7-46417-297

equipped with hydraulic line and front opening bucket / 4-in-1 bucket, operating weight: 8,475 kg, engine power: 68.8 kW @ 2,200 rpm Auction-ID: A7-46263-17

Axel cofiguration: 4x4; Mileage: 580 000 km; Auction-ID: A7-46408-20

Operating hours: 11000 Engine power: 160 kW Total weight: 22,100 kg Auction-ID: A7-46408-1

- Producer Venjakob - Length 4.250 mm - Working width 1.300 mm - Overall width 1.510 mm - Working height 880 + - 20 mm - Heightnverstellbar - Belt control system - Location, in stock - Voltage / HZ 400 / 50 - Motor power 0,75 kW

According to photos, without tools in the press, these are still being removed, machine is running and is on power Auction-ID: A1-45666-1

Laptop FUJITSU Lifebook E744 Intel i5-4210M 8 GB RAM 240 GB SSD, S/N DSDN022408, AC adapter, without software, internal NBSBG012

Laptop FUJITSU Lifebook E744 Intel i5-4210M 8 GB RAM 240 GB SSD, S/N DSDN043256, AC Adapter, without Software

Laptop FUJITSU Lifebook E744 Intel i5-4210M 8 GB RAM 240 GB SSD, S/N R5Y00773, AC adapter, without software

Laptop FUJITSU Lifebook A544 Intel i5-4200M 4 GB RAM 120 GB SSD, S/N YLUA072052, AC adapter, without software, internal NBSBG018

CAD-PC FUJITSU Esprimo P420 Intel i3-4130 4 GB RAM Nvidia Quadro M2000 4GB 240 GB SSD, S/N YLTH185989, without software

Laptop FUJITSU Lifebook E744 Intel i5-4210M 8 GB RAM 240 GB SSD, S/N DSDN043244, AC adapter, without software, internal NBSBG022

Laptop FUJITSU Lifebook E754 Intel i5-4210M 8 GB RAM 240 GB SSD, S/N DSDQ51420, AC adapter, without software

PC FUJITSU Esprimo P420 Intel i3-4130 4 GB RAM 240 GB SSD, S/N YLTH185985, without software

PC FUJITSU Esprimo P420 Intel i3-4130 4 GB RAM 240 GB SSD, S/N YLTH178225, no cables, without software

CAD-PC FUJITSU Esprimo P420 Intel i3-4130 8 GB RAM Nvidia Quadro M2000 4GB 240 GB SSD, S/N YLTH178297, no cables, without software, internal WSSBG017

PC FUJITSU Esprimo P420 Intel i3-4130 4 GB RAM 240 GB SSD, S/N YLTH178233, no cables, no software, no accessories, internal NBSBG013

Laptop FUJITSU Lifebook E744 Intel i5-4210M 8 GB RAM 240 GB SSD, S/N DSDN020466, AC adapter, without software, slight chipping case, internal NBSBG035

Laptop FUJITSU Lifebook E744 Intel i5-4210M 8 GB RAM 240 GB SSD, S/N DSDN050144, AC adapter, without software, internal NBSBG041

CAD-PC FUJITSU Esprimo P420 Intel i3-4150 8 GB RAM Nvidia Quadro M2000 4 GB 240 GB SSD, S/N YLTH270155, no cables, without software

Bench grinder Grinding wheel diameter max. 400mm Speed 1420rpm see pictures Condition: unchecked (6) Auction-ID: A7-46460-572

Underfloor aluminium circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue Saw blade diameter 450 mm Cutting range at 90 degrees: around 130 mm Cutting range at 45 degrees: around 100 mm Cutting area at 90 degrees: flat 210 x 170 mm Cutting area at 45 degrees: square 145 x 170 mm Speed 2900 rpm Total power requirement 2.3 kW Machine weight approx. 600 kg Dimensions L x W x H 4.0 x 1.5 x 1.5 m Condition: never used / new (5) Auction-ID: A7-46460-412

Automatic Saw Saw with - Feeder type RB 1500 - Roller conveyor 1500mm Good condition Saw blade diameter 400 mm Cutting range: around 135 mm Cutting range: square 130 mm Cutting area: rectangle 200 x 80 mm Machine weight approx. 1.2 t Space requirement approx. 2.0 x 1.8 x 1.95 m Condition: unchecked (6) Auction-ID: A7-46460-535

Radial drilling machine - Clamping cube 750 x 500 x 500mm - Digital display for boom travel - Coolant system - Good condition Drilling capacity in steel 40 mm Projection 1600 mm Drilling capacity in cast iron 60 mm Spindle diameter 85 mm Quill stroke 350 mm Tool holder MK 5 Speeds 24 - 1050 rpm Feeds 0.06 - 1.0 mm/rev Column diameter 345 mm Threading device yes Drilling motor 5.5 kw Total power requirement 7.5 kW Machine weight approx. 4000 kg Dimensions approx. 2.5 x 1.0 x 2.99 m Auction-ID: A7-46460-599

Band Saw Horizontal - Coolant device - Emergency stop Cutting diameter 440 mm Saw blade length 5200 x 1.1 x 34 mm Cutting width 610 x 440 mm Cutting speed m/min Total power requirement 3.7 kW Machine weight approx. 0.8 t Dimensions approx. 2.7 x 1.55 x 1.5 m Auction-ID: A7-46460-559

Cross table with swivel plate Table length 430 mm Table width 240 mm x-travel 225 mm y-travel 160 mm Table height 160 mm T-slots 12 mm Weight 45 kg Dimensions L x W x H 0.6 x 0.45 x 0.2 Condition: never used / new (5) Auction-ID: A7-46460-400

Drilling/milling machine with: • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 700 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1/1.5 kW Condition: never used / new (5) Auction-ID: A7-46460-404

Machine type: Injection moulding machine Manufacturer: ENGEL Model: Duo 3550/400 Pico Year of manufacture: 2013 Serial number: 191000 Clamping force: 400 t Clamping system: Two-platen Hydraulic system pressure: up to 160 bar Drive system: Servo-hydraulic ecodrive inside” Pump motor power: 30 kW Total installed power: approx. 45 kW Power supply: 400 V / 50 Hz / 3-phase Control system: ENGEL CC300 control unit Control features: Colour touchscreen, integrated process monitoring Equipment / Features: - Automatic central lubrication system - Safety interlocks on operator and service sides - Energy-efficient servo-hydraulic drive - Designed for large technical and automotive moulding applications Overall dimensions (L x W x H): approx. 6800 x 1900 x 2400 mm Own mass: approx. 11,000 kg Auction-ID: A7-46307-1

Partial table with: - Round and swivel axis - Axles are moved by handwheel - Both axes can be clamped Table diameter 450 mm Swivel range 90 degrees Table height 450 mm Number of T-slots 8 pcs. Machine weight approx. 140 kg Dimensions L x W x H 0.9 x 0.8 x 0.6 m Auction-ID: A7-46460-581

CNC Milling Machine - Heidenhain TNC 310 with handwheel - hydr. Tool Clamps - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure x-travel 600 mm y-travel 400 mm z-travel 400 mm Table size 800 x 400 mm Spindle holder ISO Sk 40 Spindle speeds: 10 - 3150 rpm Quill stroke mm Total power requirement 12.0 kVA Machine weight approx. 2.2 t Dimensions L x W x H 2.0 x 1.85 x 1.95 m Auction-ID: A7-46460-587

Classic motorized bicycle equipped with Motori Minarelli \"Mosquito\" 48cc engine. Vintage vehicle intended for restoration or collection. It is sold in the condition it is in, without a functional check. The Minarelli Mosquito engine is a model recognized in the classic moped sector, which adds additional value to the whole. Status: - Used - Unverified operation - Possible signs of wear and use Note: On-site inspection is recommended. The lot includes only what is visible in the photographs. Keywords: motorized bicycle, bicycle with motor, classic moped, classic motorcycle, classic vehicle, Minarelli engine, Minarelli Mosquito motori, Mosquito 48cc, antique moped, vintage bicycle, collector's vehicle, restoration project, classic motorcycle restoration, antique vehicle, antique motorcycle, vintage moped, classic bicycle restoration, bicycle auxiliary engine, histo ...

Passenger car MERCEDES-BENZ E 43 AMG 4Matic Estate, former registration number GÖ-WR 42, EZ 08.03.2018, 181.1196 abgl. Km (04.05.26), 2,996 cc Petrol, 295 kW, EURO6, VIN: WDD2132641A437663, Exterior color blue, Aluminum rims AMG 19 inch with winter tires Michelin, Leather interior anthracite, Memory seats driver + passenger, Seat heating front and rear, Seat ventilation driver's seat, Sound system Burmester, Headup-Display, 2 keys, 1 previous owner, Papers available, Technical inspection 11/27

\" Inner micrometer set / internal measuring device in wooden box The set consists of a measuring head with scale drum as well as several extensions and adjusting/accessory parts. The extensions are marked with length specifications (e.g. 50 mm, 100 mm, 200 mm, 400 mm). Area markings such as \"5/54\" are attached to the parts. An adjustment dimension and other accessories are available in the box. Condition: Used. Optically with signs of wear due to age and storage Scope of delivery: • Inner micrometer / measuring head • Several extensions (see pictures) • Adjustment dimension • Other accessories according to the picture • Original wooden box \" Auction-ID: A7-46417-119

\" Mahr Micromar Digital U-Gauge 0-25 mm, Type 40EWR-V Digital U-Gauge for outdoor measurements in the range 0-25 mm. Electronic version with ABS function and IP65 protection. Supplied in a plastic case with operating instructions. Device in very good condition. The measuring surfaces (anvil and spindle) are rounded (radius measuring surfaces). Device in very good condition, with no noticeable damage. Condition according to photos. • Manufacturer: Mahr GmbH • Series: Micromar • Type: 40EWR-V • Measuring range: 0–25 mm (0–1\") • Reading: 0.001 mm • Protection class: IP65 • Functions: ORIGIN (OR), ABS, HOLD/TOL • Display: Digital LCD • Spindle pitch: 0.5 mm • Power supply: Battery CR2032, 3V • Order no.: 4157045 • EAN: 4059192058609 \" Auction-ID: A7-46417-324

44× HSK-A63 Tool Holders   mixed industrial stock: milling cutter holders (Weldon), ER collet holders, drill chucks, extensions, face milling cutter/disc cutter holders as well as various milling cutters (solid carbide), drills, solid drills, etc. Tools partially assembled.   The offer refers exclusively to the named and illustrated tool holders. The cabinet and tool carriers are NOT included. Auction-ID: A7-46417-11

24 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 17.7 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40111-360

\" Sylvac Digital Length Comparator 400 mm / 0.01 mm (Swiss Made) Digital length comparator from Sylvac for measuring length deviations in industrial use. The device is designed for comparative measurements with a preset function and is typically used in measuring stands, fixtures and in mechanical and special machine construction. • Measuring range: 399.5 mm (15.7295 inch) • Resolution: 0.01 mm • Measuring principle: Comparison measurement (preset measurement) • Display: digital • Units: mm / inch switchable • Functions: preset, zero position, on/off • Type: long-stroke comparison measuring device / displacement measuring system • Manufacturer: Sylvac • Origin: Swiss Made \" Auction-ID: A7-46417-238

48× HSK-A63 Tool Holders   mixed industrial stock: milling cutter holders (Weldon), ER collet holders, drill chucks, extensions, face milling cutter/disc cutter holders as well as various milling cutters (solid carbide), drills, solid drills, etc. Tools partially assembled.   The offer refers exclusively to the named and illustrated tool holders. The cabinet and tool carriers are NOT included. Auction-ID: A7-46417-10