vertical radial used for sale

Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan Manufacturer: Ziehl-Abegg, radial fan type DKHR 560-6-6 -Speed: 855/625 rpm -Power: 0.47 kW -Fan diameter: 570 mm -Protection class: IP 44 -Number: 5x radial fans available -Price: per piece -Weight: 16.5 kg

High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Fan, fan, electric motor, blower, blower, centrifugal fan, emergency exhaust fan, flue gas fan, ventilation fan, exhaust gas extraction -Fan: centrifugal fan Ø 715 mm -Volume output: m³/h -Motor: Dietz 6.8 kW -Speed: 1450 rpm -Protection class: IP 54 -Input: Ø 470 mm -Dimensions: 815/750/H815 mm -Weight: 159 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 310-4-4 -Speed: 1330/1050 rpm -Power: 0.12 kW -Protection class: IP 44 -Dimensions: Ø 310 x 165 mm -Weight: 5.5kg -Quantity: 1 piece available

Ventilator, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, smoke gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 280-2 -Speed: 2800 rpm -Power: 0.4 kW -Protection class: IP 44 -Quantity: 1 piece available -Dimensions: Ø 280 x 175 mm -Weight: 8.5 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction, radial duct fan -Manufacturer: Maico, radial tube fan type ERR 12/1 -Voltage: 220V -Power: 62 W -Protection class: Iso-Kl.B G 42 -Connection input: Ø 120 mm -Connection output: Ø 125 mm -Fan wheel: Ø 330 x 170 mm -Dimensions: 420/270/H250mm -Weight: 3.5 kg/piece

Radial fan, high pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: ebm, radial fan extraction fan -Type: unfortunately without type designation -Voltage: 220V -Speed: 1080 rpm -Inlet: Ø 190 mm -Air duct connection: 285 x 145 mm -Number: 2x blowers available -Price per piece -Dimensions: 360/320/H375mm -Weight: 12 kg/piece

Fan, ventilator, electric motor, blower, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, radial fan -Type: R3G250-RK55-05 -Voltage: 48 VDC -Speed: 2250 rpm -Power: 105 W -Number: 2x fans available -Price: per piece -Dimensions: 250/105/H265 mm -Weight: 2.1 kg

bore capacity in steel (diameter): 50 mm arm length: 1.600 mm workpiece height max.: 1.200 mm distance spindle/base plate: 320 - 1.220 mm spindle taper MT: 5 quill stroke: 315 mm throat min.: 350 mm throat max.: 1.600 mm quill feed: 0,04 - 3,20 mm/U drive capacity - spindle motor: 4,0 kW spindle turning speed range: 25 - 2.000 U/min column diameter: 350 mm voltage: 400 V total power requirement: 6,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: 3 feed:: 4 Stufen : 2580 x-travel: 2500 mm throat: 1000 mm : 1000/2800 mm weight: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: 3 serial number: 4131 throat: 1000 mm documentation: ja clamping: hydraulisch kW weight of the machine ca.: 2,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24456 Technical data: - Drilling capacity in steel ST 60 approx. 60 mm - Drilling capacity boring approx. 80 mm - Thread cutting up to approx. M 40 - Drilling spindle holder MK 5 - Drilling spindle stroke 380 mm - Radius min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the boom approx. 1350 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1700 mm - Machined base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feeds 0.09 - 0.75 m/rev - Drilling spindle drive 400 V / 10 kW - E - Central clamping - Coolant device - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 7500 kg

A bench drilling and tapping machine Ixion including automatic rapid traverse is available. Drilling capacity steel/cast iron: 15mm/14mm, tapping capacity: M3-M10, spindle mount: MK2, quill stroke: 90mm, reach: 215mm, column diameter: 75mm, speed: 1600rpm, table dimensions X/Y: approx. 220mm/285mm, weight: approx. 100kg. An on-site inspection is possible.

Drilling capacity steel/cast iron: 50mm/60mm, spindle axis-column distance min./max.: 350mm/1600mm, spindle end-working surface distance: 350mm-1250mm, horizontal traverse: 1250mm, column arm vertical travel: 580mm, column diameter: 350mm, arm swivel: 360°, speed: 2000rpm, spindle travel: 315mm, torque: 392Nm, feed force: 15.6kN, machine dimensions X/Y/Z: approx. 2500mm/1250mm/3250mm, weight: approx. 3500kg. The coolant pump, the seal retainer and the measuring system are defective. Documentation available. An inspection on site is possible.

bore capacity in steel (diameter): 40 mm arm length: 1.000 mm workpiece height max.: 1.250 mm table-size: 1.150 x 690 mm spindle taper MT: 4 spindle turning speed range: 40 - 1.400 U/min feed range: 0,08 - 0,40 mm/min crossrail adjustment horizontal: 800 mm crossrail adjustment vertical: 700 mm spindle stroke: 220 mm power requirement: 3,5 kW coolant: voltage: 380 V total power requirement: 4,0 kW weight of the machine ca.: 1,6 t - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: 640 mm workpiece height max.: 950 mm bore capacity in cast iron: 50 mm threading: . spindle taper MT: 4 turning speeds: 88-1500mm (6x) U/min Feed: mm/U surface area: mm total power requirement: kW weight of the machine ca.: t Max. spindle-to-table distance: 950 mm Min. spindle-to-table distance: 220 mm Quill stroke: 220 mm KW: 1.5 Volts: 380 Machine number: 9028 Included: Clamping cube 600 x 445 x 380 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You c ...

bore capacity in steel (diameter): 65 mm arm length: 2000 mm workpiece height max.: 1800 mm surface area: 900x2000 mm turning speeds: 1400 U/min The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 65 mm arm length: 1600 mm workpiece height max.: 1600 mm surface area: 1800x800 mm turning speeds: 18-1800 U/min Feed: -2,54 mm/U The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: 1500 mm bore capacity in cast iron: 60 mm threading: . diameter of quill: . mm spindle taper MT: 5 turning speeds: 28-2.500 U/min Feed: mm/U surface area: mm total power requirement: kW weight of the machine ca.: t Max. drilling capacity taper: Diameter: 50 mm Max. spindle-to-table distance: 1500 mm Min. spindle-to-table distance: 320 mm Travel spindle: 310 mm KW: 4 Volts: 400 Machine number: 869 Included: Clamping cube 1000x750x500 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machine ...

bore capacity in steel (diameter): . mm arm length: . mm workpiece height max.: . mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: 1230 mm table surface area: 1200 x 500 mm bore stroke: 180 mm feed - independent: 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds: 60 - 1800 U/min taper MK: 4 total power requirement: 2,7 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder MK 5 Speed range 20-1200 infinitely variable in 3 rows 1/min Feed rate 0.063-0.63 mm/min Projection 300-1250 mm, quill travel 355 mm Distance from spindle head to base plate 375-1375 mm Swivel range boom 360° Connected load 5 kW

bore capacity in steel (diameter): 32 mm arm length: ca. 920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26182 Technical data: - Drilling capacity in steel ST 60 approx. 75 mm - Drilling capacity boring approx. 90 mm - Thread cutting up to approx. M 60 - Drilling spindle holder MK 5 - Drilling spindle stroke 380 mm - Radius min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the boom approx. 1380 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1750 mm - Machined base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feeds 0.09 - 0.75 m/rev - Drilling spindle drive 400 V / 10 kW - E - Central clamping - Coolant device - Dice table - various mounts + drill - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 8000 kg

bore capacity in steel (diameter): 80 ( 100 ) mm turning speeds: 20 - 1400 U/min spindle taper MT: 6 : Rechts- + Linkslauf quill stroke: 400 mm feed range - spindle: 0,045 - 1,5 mm/U arm length: 1600 mm workpiece height max.: 400 - 1800 mm base plate surface area: 1170 2185 mm accessories:: 2x Würfeltisch+Kühlmittel automatic clamping device electr.: Elektro - Mechanisch total power requirement: 14 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3 x 1,5 x 3,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 75 mm total power requirement: 14 kW weight of the machine ca.: 10 t spindle speed:: 12,5 - 1.600 U / min throat: 2000 mm - capacity at boring: 75 mm ( St 45 ) - spindle diam. 115 mm - taper in spindle: 110 mm/ Morse 6 - distance column to drilling spindel: 500.. . 2000 mm - vertical adjustment of arm: max. 1100 mm - distance column to drilling spindel: 450.. 2000 mm - drilling depth: 450 mm - range of speeds: 12,5 ...1600 U/ min // rpm - feed: 0,63 ... 3,15 mm / U - angle of arm: 360 ° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 300... 1600 mm bore radius max./min: 1800 mm bore capacity in steel (diameter): 56 mm threading: max. 65 mm bore depth: 400 mm tool taper: MK 5 base plate: 1700 x 1000 mm turning speed range - drilling: 14...1800 U/min feed: 0,0315...1,6 m/min total power requirement: 4,5 kW weight of the machine ca.: 7,13 t dimensions of the machine ca.: m Reach: 300 – 1,600 mm Max. / min. drilling radius: 1,800 mm Drilling capacity in steel: 56 mm Tapping capacity: max. M65 Drilling depth (spindle stroke): 400 mm Spindle taper: Morse taper MT 5 Base plate: 1,700 × 1,000 mm Spindle speed range: 14 – 1,800 rpm Feed rates: 0.0315 – 1.6 mm/rev Total power requirement: 4.5 kW Machine weight: approx. 7.13 t Max. distance from spindle head to base plate: 1,600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Höcker Polytechnik Type L 350 radial fan for extracting swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or small machine fleets and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Technical data: Motor power: 11 kW Inlet: 350 mm Outlet: 350 mm Air flow rate: 9,770 m³/h Condition: Gebraucht Location: Tauberbischofsheim, Germany

bore capacity in steel (diameter): 60 mm Center of spindle to wall or column: min./max. 320 - 160 mm spindle turning speed range: 20 - 2.500 U/min quill stroke: 310 mm total power requirement: 4 kW weight of the machine ca.: 4.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 55 mm arm length: 2500 mm workpiece height max.: - mm total power requirement: 8 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4 x 1 x 3 m Radial drilling machine MK 5 Spindle holder MK 5 Speed range 30 - 1500 min-1 Feed rates 0.05 - 0.6 mm/rev Space requirement approx. 3.7 x 1 x 3 m Weight approx. 5 tonnes (estimated) Working range: MK 5 x 2500 Drive: 3.7 / 6 Sonderpreis 2.900,-- EXW / ab Fundament - Selbstabbau Listenpreis 4.900,-- frei LKW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Table clamping surface: 600 x 1800 mm Height adjustment of the boom: 450 mm small/large drilling radius: 305/1305 mm Spindle holder: SK 40 Quill stroke: 200 mm Spindle speeds infinitely variable: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency-controlled: 5.5 kW electr. Connection: 400 V, 14 kVA Weight: 3400 kg Space requirement: 3800 x 2000 x 2500 mm

Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible.

Offer 26252 Technical data: - Drilling capacity into solid steel ST 60 22 mm - Drilling capacity GG 25 32 mm - Threading ST 60 M 20 - Threading GG 25 M 24 - Drilling spindle holder MK 4 - Quill stroke 140 mm - 18 drilling spindle speeds 60 - 3050 rpm - Drill feeds infinitely variable 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max 420 / 1320 mm - Swivel angle 320 ° - Table size 1200 x 600 mm - Table height 905 mm - mot. Height adjustment / stroke of the drilling column 430 mm - hydr. Columns + Boom Clamp - T – Vertical grooves on the left side of the machine - Coolant device - Drive 400 V / 1.1 / 1.6 kW - Space requirement approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight approx. 1800 kg

Donau Flex 135 Schnellradialbohrmaschine Hersteller: Donau Typ: Flex 135 Schnellradialbohrmaschine Zustand: gebraucht, sehr gut bis neuwertig Baujahr 2020 Stufenlose Drehzahleinstellung Stufenloser Pinolenvorschub Gewindeschneideinrichtung Abmessungen und Verfahrwege Werkzeugaufnahme MK 4 Säulendurchmesser mm 170 Tischabmessung mm 1200 x 600 Anzahl der T-Nuten 4 Abstand der T-Nuten mm 125 Pinolenhub mm 165 Säulenhub mm 450 Bohrleistung ins Volle St 60 mm 35 GG 22 mm 42 Gewindeschneiden St 60 M 30 GG 22 M 36 AC-Motor, frequenzgesteuert kW 4,0 bei 100 % ED. Drehzahlbereich: min -1 20 ? 3200 Vorschub stufenlos mm/U. 0,02 ? 0,7 Maschinenleuchte Spindelschutz

Offer 26217 Technical data: - Drilling capacity into solid steel ST 60 40 mm - Threading ST 60 M 30 - Drilling spindle holder MK 4 - Quill stroke 200 mm - Drilling spindle speeds infinitely variable 50 - 2000 rpm - Drill feeds 0.08 - 0.50 mm/rev - Height adjustment of the drill column 380 mm - Projection 950 mm - Travel distance upper beam 590 mm - Table size 1200 x 500 mm - Drive 400 V / 4.5 kW - Space requirement approx. W 1200 x H 2400 x D 1700 mm - Weight approx. 2700 kg - with: - Tapping device - Hydr. Columns + boom clamp - Coolant device - T – Vertical grooves on the left side of the machine - Various accessories

table with 4 slots, Incl. matching tool holders

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg

Collet / Gamesa - Radial drilling machine / mobile crane -Boom approx. 1200mm -Universal angle head can be adjusted in several ways -Spindle speed 95 - 750 rpm -Automatic feeds -Morse taper MK4 -Boom height adjustable approx. 1400mm -Control cabinet retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500Kg Hebkjvucbhon Au S Tsl

: gebraucht : 2017 : 3901 : China : 8490 € : 1 : 6790 € : 32 mm : MK 4 : 300 - 1.000 mm : 32 - 2.500 (16) U/min : 1760 mm : 800 mm : 2080 mm : 1600 kg : 530 - 1.000 mm : 2.2 kW : 240 mm : 250 mm : 0,75 kW : 0,10 - 1,25 (8) mm/U box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-ma ...

: gebraucht : 2021 : 3966 : prompt, Zwischenverkauf v : Taiwan : 15600 € : 1 : 12480 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 0,75 kW : 635 x 520 x 415 mm : 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENC ...

bore capacity in steel (diameter): 28 mm arm length: 700 mm workpiece height max.: 1300 mm tool taper: MK3 feeds: 0,1-0,3 mm/U spindle turning speed range: 100-1.220 U/min total power requirement: 1,4 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: LBH 1,8 x 0,8 x 2,3 m Incl. cube table Incl. drilling feed Mechanical clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 32 mm, 850 mm

Radial drilling machine Manufacturer: Danube Type DR32 Drilling capacity: Maximum 32 mm in steel. Tool holder: MK 4 (Morse taper). Speed range: Approx. 41 to 1,800 rpm Quill stroke: 190 mm to 200 mm. Projection: Flexibly adjustable from approx. 240 mm to 850 mm Table size: 1,200 x 600 mm Typical functions Tapping device: Integrated automatic for cutting threads (e.g. up to M26 in steel). Feeds: Automatic quill feed in several stages Coolant device: Integrated pump and coolant trough directly on the work table. Machine is in a used condition, clamping Z axis makes noises when driving up and down. Otherwise the machine is ok.

bore capacity in steel (diameter): 32 mm arm length: 950 mm turning speed range: 51 - 1000 U/min turning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mm feed range: 0,075 x 0,3 mm/min table surface area: 1200 x 510 mm total power requirement: 2 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,8 x 1,2 x 2,25 m High-speed radial end mill with - Thread cutting attachment - Vertical table 750 x 620 mm - Horizontal table 1200 x 510 mm - Emergency stop device - Documentation Machine-No. 445 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: 1230 mm table surface area: 1200 x 500 mm bore stroke: 180 mm feed - independent: 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds: 45 - 1370 U/min taper MK: 4 total power requirement: 2,7 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 16900 € : 324.48 € : 32 mm : MK 4 : 220 - 950 mm : 73 - 1.247 (6) U/min : Stahl: M 25, Guss: M 32 : 1800 mm : 830 mm : 2190 mm : 1250 kg : 350 - 1.210 mm : 0,05 - 0,15 (3) mm/min : 1.5 kW : 210 mm : 220 mm : 1.260 x 640 x 160 mm : 0,75 kW : 600 x 445 x 380 mm : 2320 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 30100 € : 574.91 € : 50 mm : MK 5 : 360 - 1.250 mm : 44 - 1.206 (12) U/min : Stahl/Guß: M40/M50 : 2060 mm : 995 mm : 2240 mm : 2300 kg : 441 - 1.345 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 300 mm : 270 mm : 1.785 x 785 x 190 mm : 0,75 kW : 635 x 520 x 420 mm : 2645 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 39200 € : 748.72 € : 50 mm : MK 5 : 350 - 1.600 mm : 56 - 1.450 (12) U/min : Stahl/Guß: M40/M50 : 2670 mm : 1120 mm : 2410 mm : 3300 kg : 465 - 1.420 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 320 mm : 270 mm : 2.550 x 970 x 200 mm : 1,5 kW : 630 x 500 x 500 mm : 2760 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 51700 € : 977.13 € : 65 mm : MK 5 : 440 - 1.580 mm : 40 - 1.920 (12) U/min : Stahl/Guß: M50/M60 : 2850 mm : 1400 mm : 2940 mm : 4600 kg : 380 - 1.600 mm : 0,07 - 0,96 (6) mm/min : 5.5 kW : 432 mm : 370 mm : 2.480 x 1.050 x 210 mm : 1,5 kW : 700 x 500 x 400 mm : 3170 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of Log ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 21300 € : 408.96 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 635 x 520 x 415 mm : 2530 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.