138,015 used machines on RESALE, but how to find them? Machine Search
Key data: 3300 mm, 2300 mm, 1000 mm
Control Siemens 840D Table size 3,500 x 1,250 mm X-travel (longitudinal) 3,300 mm Y-travel (cross) 2,300 mm Z-travel (vertical) 1,000 mm Spindle HSK 100 Rapid traverse X-axis 25m/min Rapid traverse Y-axis 40m/min Workpiece weight 9.000 kg R.P.M. 100 – 12,000 kW 70 Volts 400 Cycles 50 Including: Automatic Tool Changer 60 tools Rotating B - C axis head: B-axis +/- 95 degrees – C-axis +/- 190 degrees.
x-travel:560 mm y-travel:450 mm z-travel:450 mm table surface area:760 x 410 mm turning speed range:8.000 U/min total power requirement:20 kW Vertical Processing Centre
turning diameter:200 mm turning height:120 mm weight of the machine ca.:18 t Available from 01.08.2024
CNC controller: FANUC Series 18i-MB Axes X-axis travel mm: 800 Y-axis travel mm: 540 Z-axis travel mm: 540 Distance spindle nose - table surface mm: 45 - 685 Worktable Table dimensions mm: 925 x 540 Max. workpiece weight kg: 700 T-Slot version: 18 Spindle Spindle speed rpm: 8.000 Tool system Tool magazine slots: 30 Max. Tool Diameter: 76 Max tool weight kg: 8 Equipment Chip conveyor Machine running times Under power: 24.000 Basic machine dimensions / weight Length mm: 2.955 Width mm: 2.137 Height mm: 2.713 Weight kg: 6.500
Key data: 635 mm, 510 mm, 460 mm
CNC Vertical Machining Center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of Make: 2010 Travel: X 635 Y 510 Z 460 Speed range: 20 – 8,000 rpm infinitely variable With the following accessories: Rigid angle table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Tool length measurement Heidenhain TT 140 Full protection cabin with sliding doors and interior lighting Coolant Setup Signal light 4 colour Conveyor Chip rinsing gun 3 Height Adjustable Machine Shoes Operating instructions
Key data: 11000 mm, 3000 mm, 1500 mm
X axis 11.000mm Y axis 3.000mm Z axis 700mm W axis 800mm Spindle diameter 160mm Spindle taper iso 50 Spindle speed 1.800 rpm Spindle power 65kw ATC 60 positions Yom 1995 Nr 02 rotary table:-2.500x2.500mm capacity 25 ton ( 2 axes controlled) -2.000x2.000mm 15 tons capacity ( 2 axes controlled) One birothative head Two boring heads Floor plates included
max. wheel diameter:180 mm max. module:7 hob turning speeds:200-2000 U/min min. number of teeth:4 excluding conveyor belt
turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!
turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!
Width of plate,mm 3000 Thickness of plate,mm 66-150 Description Hot and cold bending Force: 2200t Main roll: 860mm Changeable roll: 500mm Width: 3000mm Bending by circle arc Cold bending: 66mm Hot bending: 150mm Min diameter of cylinder: 1000mm Bending at the angle Cold bending: 30mm Hot bending: 60mm Internal bending radius: 60m weight: 100t
Stehendbogenauslage / Vertical Press-Stacker Delivery MBO SBAP 46-ME Baujahr / Year 1994 - Serial-No. 940114747 Arbeitsbreite mit ME max. 430mm / Working width with ME max. 430mm Bogenlänge / Sheet length min. 80mm Bogenlänge / Sheet length max. 300mm Stapellänge / Pile length max. 730mm Einlaufhöhe / Infeed height min. 380mm Einlaufhöhe / Infeed height max. 950mm Pressdruck / Pressure 20.000 N Mechanische Geschwindigkeit / Mechanical Speed max: 30 – 160 m/min Eigensteuerung // SelfControl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
weight of the machine ca.:9,5 t x-travel:406 mm z-travel:380 mm
pulling force - max.:80 t total wight:26 t dimensions of the machine ca.:49 m² m total power requirement:85 kW working stroke:250 mm
Vertikalstapelauslage - Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66.1 Year 1996 - Serial-No. 79719/96-239513 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pulling force - max.:100 t total power requirement:87 kW weight of the machine ca.:51 t dimensions of the machine ca.:95 m² m working stroke:2750 mm max. helix angle:+/- 30 ° Working stroke: 2750 mm
turning diameter:150 mm total power requirement:36 kW
turning diameter:150 mm total power requirement:36 kW dimensions of the machine ca.:6,20 x 5,16 x 3,35 m
turning diameter:150 mm total power requirement:36 kW dimensions of the machine ca.:6,20 x 5,16 x 3,35 m
Vertikale Pressauslage / Vertical Press Delivery MBO FA 82-ME Navigator Year 2010 - Serial-No. 104197100101 Arbeitsbreite / Working width max. 820mm mit integrierten Presswalzen / with intergrated press rollers mit Markiereinrichtung / with Marking Device ME Navigator Control Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
x-travel:700 mm y-travel:550 mm z-travel:500 mm tool taper:SK40 spindle speed max.:12.000 U/min Tool changer:30 fach electronic handwheel chip conveyor
max. wheel diameter:180 mm gear width: mm max. module:4 total power requirement:14 kW weight of the machine ca.:8 t slide travel axial ( Z-axis ):300 mm work piece - max.:490-640 mm
Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66.D+MKE Year 1998 - Serial-No. 101486/98-256505 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
x-travel:1270 mm y-travel:460 mm z-travel:660 mm Machine hours: 58,355 Spindle speed: 8,000 rpm
Turning Diameter 830 mm Turning lenght 750 mm Spindle speed 2000 rpm Controller FANUC-i Chuck size 24"
roll diameter: 483 mm cutting range: Vert. 508 / Hor. 457 mm Cutting length: 356 mm weight of the machine ca.: 2.3 t dimensions of the machine ca.: 3.05 x 2.05 x 2.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel:100 mm y-travel:100 mm z-travel:100 mm total power requirement:0,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:1600 x 1000 x 1300 mm milling depth:0-50 mm
SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Inclination: 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Bsjuxvmq0O3 Saw blade speed 25-115m/min Butt welder capacity 3-16mm Engine Size: 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Circuit breaker Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welding machine, blade shears and grinding machine Nuttisch Low-voltage halogen lamp Mitre protection for oblique cuts Quick-gap stop for straight cuts
roll diameter: 420 mm throat: 410 mm saw band length: 3150 - 3260 mm saw band width: 3-16 weight: ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, Vertical machining center - 2-pallet, Daewoo ACE VC500, CNC Model Fanuc, CNC version 18-M, Spindle Taper toolholders iso 40, Power spindle 15 Kw, RPM 10000, Number of tools 30, X-axis travel 760 mm, Y-axis travel 510 mm, Z-axis travel 570 mm, Changer pallet yes, Pallet dimensions 860x560 mm, Maximum load allowed 300 Kg, Swing type pallet yes, High coolant pressure yes, Cheap conveyor yes, Brand Daewoo, Model ACE VC500, Construction year 2000, DIMENSIONS AND WEIGHT, Length 3600 mm, Width 3700 mm, Height 2935 mm, Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped ...
x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm
table diameter:500 mm total power requirement:3 kW weight of the machine ca.:2 t dimensions of the machine ca.:2300 x 1270 x 2200 mm
Cutting height:150 mm saw band length:2400 mm cutting width:350 mm total power requirement:380 V weight of the machine ca.:350 kg dimensions of the machine ca.:800 x 950 x 1650 mm
Vertical machining center LEADWELL MCV 610 CR CNC Fanuc 0M X 610 Y 510 Z 410 6000RPM ISO 40 The machine is in our warehouse in Gussago BS, under power Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 610, Y axis: 510, Z axis: 410, CNC type: Fanuc, Spindle revolutions: 6000
Vertical machining center CHIRON FZ08W 2 pallets 12 HSK32 tools Spindle 15000 rpm HSK-32 rotopallet (2 pallets) CNC Fanuc 21iM chip conveyor The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, CNC type: Fanuc 21iM, 2 pallets: Yes, Number of pallets: 2, Spindle speed RPM: 15000
This 3-axis KNUTH X.mill 640 CNC was manufactured in 2009. It features a total power of 16.4 kW and operates at 400 Volt with a frequency of 50 Hz across 3 phases. The machine is equipped with a new frequency inverter and a new braking resistor. If you are looking to get high-quality machining capabilities, consider the KNUTH X.mill 640 CNC vertical machining centre we have for sale. Contact us for further details.
This 3-axis MIKRON VCP 600 vertical machining center was manufactured in 2001. It features a 30-position tool changer, although only 21 positions are currently usable. The high-speed spindle operates at 8,000 rpm due to a slight imbalance. Consider the opportunity to buy this MIKRON VCP 600 vertical machining center. Contact us for more information.
Inv. Num. : 8135 Type: MCV 750 A speed Producer: MAS Created: 2020 Parameters: Control system: Heidenhain 640 Number of axes: 4 pieces Minimum vertical spindle speed: 12000 1/min X-axis travel: 750 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Number of all tools: 24 pieces Rapid traverse X/Y/Z: 40000/40000/40000 mm/min Total power: 50 kW Machine height: 2500 mm Machine length: 3400 mm Machine width: 3110 mm Machine weight: 5250 kg Equipment: Chuck TOS UIS 200/4-1-M2; TOS UIS 250/4-2-M1
x-travel: 1400 mm y-travel: 630 mm z-travel: 600 mm Control: Heidenhain total power requirement: 15 kW weight of the machine ca.: 5,85 t dimensions of the machine ca.: 1800x630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1200 mm y-travel: 600 mm z-travel: 675 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mm throat: 390 mm workpiece height: 240 mm saw band length: 2980 mm table surface area: 500x600 mm weight of the machine ca.: 350 kg dimensions of the machine ca.: 650x1100x1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical Clamp Set, Vertical Toggle Clamp WMW A63 TGL 34181 Height under clamping arm: 63 mm Clamping arm length: 125 mm Clamping arm opening angle: max. 105 ° Vertical clamp set consists of 5 vertical clamps ! New !' Dimensions(per clamp): 200 x 60 x 280 mm Dimensions: 300 x 180 x 280 mm
The 2005 Deckel Maho DMC 104 V linear is a CNC (Computer Numerical Control) vertical machining center manufactured by Deckel Maho, a part of DMG MORI. This machine is known for its precision and efficiency in machining tasks, including milling, drilling, and tapping. Here are some key features and specifications of the 2005 Deckel Maho DMC 104 V linear: - Travel and Table Size: - X-axis travel: Approximately 1040 mm - Y-axis travel: Approximately 600 mm - Z-axis travel: Approximately 500 mm - Table size: Large enough to accommodate substantial workpieces - Spindle: - Spindle speed: High rotational speeds for efficient cutting - Spindle power: Sufficient for heavy-duty machining tasks - Linear Drives: - Equipped with linear drives for the X, Y, and Z axes, providing higher precision and faster movements compared to traditional ball screw drives. - Control System: - Typically equip ...
Bridge type Machining Centre NICOLAS CORREA EURO 2000 - 18.000 rpm - capacity 2000x1250x650 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2300x1000 mm, Longitudinal travel x axis: 2000 mm, Cross travel y axis: 1250 mm, Vertical travel z axis: 650 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 30.000 mm/1, Rapid feed x-y-z axes: 30.000 mm/1, Spindle taper type: HSK 63, Automatic tools change nr.: 40, Spindle speed: 0- 18.000 rpm, Spindle motor power: 20 Kw, Cnc: SELCA 4045, Approx net weight: 20.000 Kg, Accessories: through-spindle coolant, chip conveyor
Indoor agriculture / vertical hydroponic farm, and the machines are associated with these operations. We are talking about leafy vegetables and herbs, to name a few examples: Iceberg lettuce, romaine, basil, mint, coriander, rocket etc. The machines are part of the same solution developed and manufactured by the Taiwanese company YesHealth. The machines are 2 years old. The drying machine has not been in operation for one year. Seeder, 2 kW Harvester, 8 kW Cleaning and drying machine, 20 kW Labelling machine, 300W Find more here - .ucymachines/
2023 Haas UMC-500SS 5-axis vertical machining center Manufacturer: Haas Year: 02/2023 In production: 11/2023 X: 610 mm Y: 406 mm Z: 406 mm B: 120’ to 35-‘ C: 360’ Spindle speed: 12000 rpm Spindle taper: CT 40 Toolholders Vise Machine in very good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Siemens Sinumerik 828D control system with ShopMill Travel X/Y/Z: 1020 x 635 x 610 mm Spindle speed: 10,000 min-1 Tool magazine for 24 Wkz. SK 40 IKZ Conveyor Measuring Sensors
STAMA MC325 / S 2-palllet Double fourth axes Spindle 9000 rpm / 36 tools priced to sell low price - good deal The machine is visible in our warehouse in Gussago BS., Mimu Machine Tools, Gussago BS Italy, The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations, with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one, automatic tool exchange system and sometimes multiple pallets, CNC type: Siemens, Fourth axis: 2 + 2, Number of pallets: 2, Spindle speed RPM: 9000
Chiron FZ18W Magnum, rotopallet, 1999, CNC Siemens 840D, X 630 Y 400 Z 425, tables (2) 850x450mm, 20 tools, ISO 40 / 18kW / 140 Nm, 40m/min, HAWE hydraulics, automatic doors, swarf conveyor, 6 ton, 3,6 x 2,25 x 2,85, machine can be inspected under power in our warehouse, Mimu Machine Tools (Italy)
maximum number of results exceeded
please refine your search
