vertical packing machine used for sale

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz -Shaft mounting: Ø 20 mm/M16 mm -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 4.4 kW 2890 rpm at 50 Hz -Motor: 6.6 kW 5890 rpm at 100 Hz -Shaft mount: Ø 35 mm -Dimensions: 550/180/H200 mm -Weight: 40 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor -Motor: 3 kW 2860 rpm at 50 Hz -Motor: 4.4 kW 5800 rpm at 100 Hz -Shaft mount: Ø 40 mm -Shaft length: 150 mm -Dimensions: 600/240/H150mm -Weight: 40kg

plate thickness: 1,25 mm roll-body distance: 250 mm throat: 260 mm distance between roll centers: 62 mm tool adaptor: 26 mm speed: 6,3 m/min total power requirement: 0,7 kW weight: 170 kg range L-W-H: 1020x600x1500 mm Domestic equipments: - motor driven beading machine - 5 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 48x3,5 mm : 48x2,5 mm : 32 mm : 64x2 mm bending speed: 2 U/min : R10-R300 total power requirement: 1,5 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material - diameter: Ø 35 mm I-beam section - flat steel: 60x10 mm L-beam: 50 mm tube diameter max.: Ø 60x2 mm square material: 45x45x3 mm roll diam. toproll: 162 mm roll diam. bottom roll: 152 mm Shaft diameter: 50/40 mm turning speeds: 3,3 m/min total power requirement: 1,5 + 0,75 kW weight: 450 kg range L-W-H: 1050x950x1450 mm Domestic equipments: - hydr. Delivery of the top roller - standard roller set - side straightening rollers - Upper roll holder: 50.0 mm - Under roller diameter: 40.0 mm - Control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 105 kg engine output: 4 kW turning speeds: 2800 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 2000 mm band length: 75 mm band speed: 16,5/33 m/s turning speeds: 1400/2800 U/min weight of the machine ca.: 75 kg Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm -Weight: 18 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW range L-W-H: 1100x850x1350 mm weight: 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

L-beam: 50x5 mm square material: 50x40x3 mm I - beam section - flat steel: 120x15 mm I-beam section - upend: 60x10 mm round material: Ø 35 mm tube diameter: Ø 70x2 mm roll diameter: 155 mm bending speed: 4,3 m/min bore: 50 mm total power requirement: 1,5 kW weight: 400 kg dimensions: 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I-beam section - flat steel: 80x20 (d1200) mm I-beam section - upend: 80x25 (d2100) mm L-beam: 50x50x6 (d1000) mm bar material - diameter: 40 (d800) mm square material: 60x60x3 (d4000) mm rectangle: 80x30x3 (d6000) mm tube diameter max.: 70x2 (d1600) mm tool adaptor: 60 mm roll diameter: 177 mm bending speed: 6,4 m/min total power requirement: 4 kW machine weight ab.: 970 kg Overall size: 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 33 m/sek. total power requirement: 3 kW weight of the machine ca.: 95 kg turning speeds: 2800 U/min Standard equipment: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg

band speed: 33 m/s grinding band dimension: 75 x 2000 mm total power requirement: 3 kW weight of the machine ca.: 75 kg turning speeds: 2800 U/min Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 92 mm tool adaptor: 35 mm speed: 3,5 m/min total power requirement: 1,5 kW weight of the machine ca.: 295 kg dimensions of the machine ca.: 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 16,5/33 m/sec total power requirement: 2,6/3,37 kW turning speeds: 1400/2800 U/min weight of the machine ca.: 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW range L-W-H: 900 x 600 x 1000 mm weight: 470 kg connected load: 400/50 V/Hz Equipment / Accessories: - Three driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece

plate thickness: 4 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 132 mm tool adaptor: 40 mm speed: 5 m/min total power requirement: 2,2 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 1650x700x1280 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

shaft diameter: 60 mm Shaft revolutions: 6 U/min roll diameter: 215 mm pressure hydraulic cylinder: 180 kN dimensions: 1125x870x1620 mm weight: 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll diameter: 90 mm min. dia.: 130 mm total power requirement: 1,1 kw weight of the machine ca.: 570 kg dimensions of the machine ca.: 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 16,5/33 m/sec engine output: 2,6/3,37 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW weight: 495 kg range L-W-H: 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll length: 1280 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 63x4,2 mm external diameter: min. Ø 5 mm bending radius min.: 10 mm bending radius max.: 270 mm Bending Angle: max. 210 ° bending device: gegen Uhrzeigersinn total power requirement: 0,75 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 740x470x1030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 215 mm shaft diameter: 60 mm Shaft revolutions: 6 U/min : 100x2 mm : 80x15 mm pressure hydraulic cylinder: 180 kN total power requirement: 2,2 kW weight: 720 kg dimensions: 1200x900x1700 mm Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.40 kW 12000 rpm at 200 Hz -Motor: 0.55 kW 18000 rpm at 300 Hz -Receptacle: Collet -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 20 mm -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2820 rpm at 50 Hz -Motor: 2.2 kW 5800 rpm at 100 Hz -Voltage: 380 V -Shaft mounting: Ø 30 mm -Weight: 15 kg

: 60x3 mm : 60x2,5 mm : 35 mm : 64x4 mm : R10-R300 bending speed: 2 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 200 kN stroke length max.: 200 mm working feed: 10 mm/sec return speed: 20 mm/sec : 480x1060 mm work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200x12 mm bending capacity max. - round: 48x4,0 mm weight: 500 kg Overall size: 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 16,5/33 m/sec engine output: 3,4/4,5 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 16 mm x-travel: 16-200 mm table length: 1500 mm table width: 375 mm milling spindle: ISO 40 max. clampable toolpiece shaft diameter: 30 mm max. useable hobs, normal diameter: 40 mm distance between milling spindle and table: 150-250 mm axial move. of milling spindle (auto./manual): 120 mm vertical adjust. of milling slide (manual): 100 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 2,00x1,40x2,40 m K4 - TECHDETAIL UK: 0,11 kW K4 - TECHDETAIL UK: 0,6/1,1 kW K4 - TECHDETAIL UK: 3 x 0,012-0,05 mm/U K4 - TECHDETAIL UK: 16x60 mm K4 - TECHDETAIL UK: 12 x 280 - 3550 U/min K4 - TECHDETAIL UK: 0,85 kW K4 - TECHDETAIL UK: 0-2,0 mm K4 - TECHDETAIL UK: 250 mm Condition: ready for production The machine is suitable for the manufacture of flutes and slots using undersize cutters with hydraulic adjustment. Roughing and finishing can be done in one single clamping.  ...

Machine vice, sturdy vice, drill press vice -Jaw width: 230 mm -Jaw height: 73 mm -Clamping depth: max. 300 mm -swivel -Weight: 70 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 63 mm -Clamping depth: max 165 mm -Weight: 35 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Clamping depth: max. 280 mm -Dimensions: 600/250/H140 mm -Weight: 50 kg

x-travel: 800 mm y-travel: 450 mm z-travel: 400 mm table surface area: 1385 x 305 mm spindle taper: SK 40 quill stroke: 200 mm spindle turning speed range: 50 - 3500 U/min control: HEIDENHAIN control: TNC 155 total power requirement: 5,8 kW weight of the machine ca.: 2,5 t dimensions: 2,25 x 2,0 x 2,4 m Accessories: electron. handwheeel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 650 mm gear width: 200 mm max. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mm table bore diameter: 150 mm number of strokes - stepless: 35,5 - 560 c/min max. ram stroke: 230 mm feeds: 3,55 - 40 mm/min radial feed: 0,8 - 9 mm/min work-spindle diameter: 110 mm total power requirement: 28,2 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,8 x 2,3 x 2,5 m Gear shaping machine for the production of spur gears, for Internal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630 complete Modernisation + overhaul in 2012 with: - new painting - new electrical system from Telemecanique - Counter Holder - Chip conveyor - Coolant unit - change gears Not used in production again after overhaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 100 mm -Dimensions: 460/170/H120 mm -Weight: 40 kg