126,701 used machines on RESALE, but how to find them? Machine Search
Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg
OKUMA MX 45 VAE TECHNICAL SPECIFICATIONS CNC model Okuma OSP Cnc version OSP 700 M Tool mount BT 40 Spindle power 11Kw Kw Number of Spindle Revolutions 7000 Tool number 30 X-axis travel 762 mm Y-axis travel 460 mm Z-axis travel 450 mm Rapid advances linear axes X Y Z 30 30 24 m/min Table dimensions 1000x460 mm Roller guides High cooling pressure Pressure value 15 bar System with external tank with filter yes Dredging chip evacuator
Year of construction 2003 Control Heidenhain iTNC 530 Table size 280mm Table load 200kg A-axis +/- 110 degrees B-axis 360 degrees X-axis displacement 700mm Y-axis displacement 590mm Z-axis displacement 480mm Spindle 15000 rpm Rapid passage 32m / min Automatic tool changer Yes, Big Plus spindle system Number of tools32 Tool length 280 mm Tool diameter 88 mm or 125 mm with adjacent pocket area Tool weight 7 kg Input400 / 3 / 50hz 33kW Equipment gap conveyors, coolant, handwheel, oil cooler Features Fully enclosed guarding Length 4000 mm Width 3000mm Height 3000 mm Net weight actually 9,490 kg. / 9.4 tons.
HURCO VM10 Vertical Machining Centre. Hurco WINMax Control Year of construction: 2010 Manufacturer: Hurco Model: VM10 Control: Hurco WINMAX Spindle Speed: 10000rpm Table size: 762 x 356 mm Tool change capacity: 20 Tool size: DIN40 Traverses XYZ: 560 x 356 x 457mm
Verticale drilling unit, 3 spindles suitable for IMA - incompatible with a Weeke plug
x-travel: 1000 mm y-travel: 508 mm z-travel: 460 mm size of pallet: 1240 x 550 mm numbers of pallets: 2 workpiece weight: 800 kg spindle taper ISO: 40 spindle motor: 5,5 kW turning speed range: 28 - 4000 U/min no. of tools in magazin: 30 control: MAZATROL M 1 total power requirement: kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 4,50 x 3,00 x 2,65 m acc.: chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
inner taper of milling spindel: Sk40 collet diameter: nein turning speed range: 300 bis 3000 U/min drive motor: 15 kW weight of the machine ca.: 0,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/min drive motor: kW distance spindle - column: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. General characteristics: Material Stainless steel Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 700X860 mm Outer diameter body 805 mm Body height 1040 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Vertical tank made of stainless steel with a useful capacity of 400 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (400 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 880 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (500 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 900 mm
Vertical tank manufactured by aguilar and rooms in stainless steel 316L with a total capacity of 610 liters (500 useful liters). Flat top bottom with folding lid with handle and stirring support (triple-blade propeller type) Conical bottom with discharge through the bottom (DN50 PN10). About 3 posters. General characteristics: Maker AGUILAR AND ROOMS Guy Vertical mixer tank Material Stainless steel 316L Year of manufacture 1995 Weight 150 kg Body Atm design pressure Ambient design temperature Specifications: Volume 500 L (TOTAL: 610 L) Background type Sup. flat - conical inf. Type of agitation Triple-belic propeller Envelope 3 posters Upper bottom tubulatures x1 Lower bottom tubulatures x1 Outer diameter body 850 mm Body thickness 3 mm Body height 1000 mm Body height + backgrounds 1255 mm (TOTAL WITH AGITATION: 1995 mm) Top bottom thickness ...
Vertical tank made of stainless steel with a capacity of 650 liters. Top klopper bottom with feed flange Body with 3 flanges Bottom klopper with discharge flange Mounted on 3 legs General characteristics: Guy Vertical tank Material Stainless steel Year of manufacture 2003 Weight 160 kg Technical features: Design pressure: 7 bar Test pressure: 10 bar Design temperature: ambient Characteristics of the flanges: Top bottom: Power supply: DIN2576 PN10 DN15 AISI316L Body For visual level: x2 DN25 PN10/40 AISI316L DIN2576 PN10 DN15/21.3 AISI316L Bottom bottom Download: DIN2576 DN15 PN10 AISI316L Specifications: Volume 650 l Background type Klopper Envelope 3 legs Upper bottom tubulatures x1 Lateral tubulatures x3 Lower bottom tubulatures x1 Outer diameter body 600 mm Body height 2000 mm (TOTAL: 2700 mm) Lower exit height 190 mm
Vertical tank made of inozidable steel with an approximate capacity of 220 liters. Flat top bottom with removable lid and manual closures. On the lid there is a man's mouth with manually folding lid, tubulaadura with NW type thread and tubuladura with inner thread. Inclined flat bottom with flange for discharge. Mounted on 3 legs. General characteristics: Maker SCHRADER Material Stainless steel Upper bottom tubulatures: Thread NW outer diam 65 mm - inner diam 38 mm Inner thread junction 30 mm Lower bottom tubulatures: Discharge flange: 97 mm outer diam - 38 mm inner diam Specifications: Volume 220 l approx. Background type Slope Envelope 3 legs Upper bottom tubulatures x2 Lower bottom tubulatures x1 Man's mouth 300 mm Outer diameter body 600 mm Body height 850 mm
Vertical tank manufactured by GIUSTI in stainless steel with a total capacity of 198 liters and a useful volume of 160 liters. Domed upper bottom bolted to the body with 4 clamp connections and 2 handles. Lower bottom bulged with discharge from the bottom by valve. Clamp output connection. On structure with wheels. General characteristics: Maker GIUSTI Guy Vertical tank Material Stainless steel Year of manufacture 2007 Design pressure: -1/+1 bar Design temperature: 150 ºC Working conditions: 0.5 bar at 30 ºC Test pressure: 1.7 bar at 10+-5 ºC Specifications: Volume 160 L (TOTAL: 198 L) Background type Convex Envelope Wheels Outer diameter body 600 mm Body height 550 mm
Vertical tank manufactured by SKERMAN in stainless steel with a capacity of 100 liters. Domed top bottom with 1 peephole and 4 clamp connections Bottom bulged with discharge from the bottom and propeller-type agitation of 4 blades. On 4 wheels. General characteristics: Maker SKERMAN Guy Vertical tank with agitation Material Stainless steel Year of manufacture 2009 Design pressures (min/max); empty / 1.1 bar Design temperature: (min/max): +5/+25 ºC Test pressure: 1.6 bar Specifications: Volume 100 L Background type Convex Type of agitation Propeller Agitation motor 0.5 hp - 0.37 kW Envelope 4 wheels Upper bottom tubulatures x4 clamp Lower bottom tubulatures x1 Outer diameter body 700 mm Body height 250 mm
Vertical tank made of stainless steel with a capacity of 100 liters. Domed upper bottom screwed to the body with 2 peepholes, 3 clamp connections and motor for agitation. Conical bottom with discharge from the bottom. It has a pump located under the lower bottom for the recirculation of the fluid. On 4 wheels. General characteristics: Guy Vertical tank Material Stainless steel Specifications: Volume 100 L Background type Bulging sup. - conical inf. Agitation motor 0.5 hp - 0.37 kW Envelope 4 wheels Upper bottom tubulatures x3 Lower bottom tubulatures x1 Peepholes x2 Outer diameter body 750 mm Body height 250 mm
Vertical tank made of stainless steel with a capacity of 150 liters. Domed upper bottom with 6 clamp connections and 2 ears for elevation. With a side entrance. Lower bottom bulged with discharge from the bottom by valve and propeller-type agitation without motor. On 4 wheels. General characteristics: Guy Vertical tank with agitation Material Stainless steel Specifications: Volume 150 L Background type Convex Type of agitation Propeller Envelope 4 wheels Ears x2 Upper bottom tubulatures x6 clamp Lower bottom tubulatures x1 Outer diameter body 550 mm Body height 600 mm
Vertical tank made of inoxidbale steel with a capacity of 500 liters. With half a cane, calorifugated, on 3 legs and with a manually folding lid. Sloping bottom. General characteristics: Material Stainless steel Specifications: Volume 500 L Background type Inclined bottom Half a cane + Lagging + Envelope 3 legs Outer diameter body 900 mm (TOTAL: 1,300 mm) Body height 800 mm (TOTAL: 2,000 mm)
PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T
Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system
in stock on pallet Auction-ID: A1-45495-464
Diametro Tavola Rotante: 1000 Posizioni Tavola: 2 Canali caldi: 8
Controllo: CC-200; Euromap: 200/80; spessore stampo: 450 min; corsa piano mobile: 357.
Doosan 3-Axis CNC Vertical Machining Center Heavy-Duty 3-Axis Vertical Machining Center Built for aggressive cutting capacity, this 2018 Doosan Mynx 7500/50 is a robust 3-axis CNC vertical center ideal for heavy part machining and high-productivity workflows. Technical Details 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Doosan Model: Mynx 7500/50 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 1525 mm / 762 mm / 625 mm Table size: 1600 x 750 mm Max. workpiece weight: 1500 kg Spindle speed: 60 – 6000 rpm Spindle motor power: 18.5 / 22 kW Max. torque: 452 Nm Spindle taper: DIN 69871 B SK 50 Distance spindle nose to table: 200 – 825 mm Distance spindle center to column: 785 mm Rapid traverse (X, Y / Z): 30 m/min / 24 m/min Feed rate (X, Y, Z): 1 – 12,000 mm/min ...
Hartford 3-Axis CNC Vertical Machining Center Late-Model 3-Axis CNC Vertical Center This 2021 Hartford HCMC-1682 offers exceptional structural rigidity and modern CNC capabilities, providing a highly efficient and reliable solution for versatile 3-axis milling. Technical Details 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Hartford Model: HCMC-1682 Machine number: 100000755 Year of manufacture: 2021 Controller: Fanuc OiMF PLUS 2. Operational parameters Travel (X / Y / Z): 1,600 / 820 / 660 mm Table Size: 1,750 x 820 mm Max. Table Load: 2,200 kg Spindle Taper: ISO50 Spindle Speed Geared: 4,000 / 6,000 / 8,000 RPM DDS: 10,000 / 12,000 RPM Spindle Power: 11.0 / 15.0 kW (options up to 26 kW) Rapid Traverse (X / Y / Z): 20 / 20 / 18 m/min Number of ATC Stations: 32 Spindle Nose to Table: 150 – 810 mm Electri ...
Toyoda 3-Axis CNC Vertical Machining Center Robust 3-Axis Vertical Machining Center Designed for stability and endurance, this 2008 Toyoda FV 1365 provides high-accuracy 3-axis CNC milling to support a wide variety of industrial metalworking applications. Technical Details 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Toyoda Model: FV 1365 Machine number: 0831 Year of manufacture: 2010 2. Operational parameters Travel (X / Y / Z): 1300 mm / 650 mm / 600 mm Table size: 1100 x 650 mm Max. load on table: 900 kg Spindle: 18.5 kW; 6000 rpm Tool holder: BT50 Tool magazine: 30 positions Control: Fanuc 3. Weights Machine weight: 7000 kg 4. Dimensions Overall dimensions (Width x Length x Height): 3506 x 3624 x 2940 mm Disclaimer: The technical specifications provided are for gene ...
This 3-axis TBI VC 1060 HH was manufactured in 2020. It features an X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1100 x 500 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the TBI VC 1060 HH vertical machining centre we have for sale. Contact us for further details.
This 3-axis DMG Mori Seiki DMC 635V ecoline was manufactured in 2013. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine that holds up to 30 tools. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki DMC 635V ecoline vertical machining centre we have for sale. Contact us for further details.
This 5-axis DMG MORI DMU 60 Monoblock was manufactured in 2016. It features an X-axis travel of 730 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful motor spindle capable of reaching speeds up to 18,000 rpm and includes a 24-pocket tool changer. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 Monoblock vertical machining centre we have for sale. Contact us for further details.
This 3-axis NIKKEI VH-1010 was manufactured in 2007. It features a table size of 1200 Ã 450 mm and a maximum table load of 450 kg. The machine offers impressive axis travels with an X-axis of 1010 mm, Y-axis of 500 mm, and Z-axis of 520 mm. If you are looking to get high-quality machining capabilities, consider the NIKKEI VH-1010 vertical machining centre we have for sale. Contact us for further details.
This 4-axis MIKRON VCE 750 was manufactured in 1998. It features impressive travels of 762 mm in the X-axis, 510 mm in the Y-axis, and 560 mm in the Z-axis. The machine includes a tool magazine with 20 positions and a maximum table load capacity of 1,360 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON VCE 750 vertical machining centre we have for sale. Contact us for further details.
This 4-axis DMC 104 V linear was manufactured in 2005. It features an impressive X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust clamping surface of 1250 mm x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMC 104 V linear vertical machining centre we have for sale. Contact us for further details.
Catalog No. : 5889 Type: VU 2313 Producer: TRIMILL Made in: 2010 Characteristic: Control system: HEIDENHAIN iTNC 530 Table dimensions: 1800x1800 mm Maximum table load: 18000 kg Number of axes: 5 pcs Total hours: 68.648 h Hours on: 41.293 h Travel length X-axis: 2300 mm Travel length Y-axis: 1300 mm Travel length Z-axis: 1000 mm Number of tools in the magazine: 10 pcs Max. pindle speed: 10000 1/min Max. Tool diameter: 110 mm Max. tool lenght: 450 mm Max. tool weight: 12 kg Power of the spindle: 25 kW Tool clamping: HSK-A 100 Weight: 38000 kg Equipment: Turntable Milling head Chip convoyer 2x Probe HEIDENHAIN and BLUM
This 3-axis HAAS VF-2SS was manufactured in 2014. It features advanced capabilities including tool measuring and a probe for enhanced precision. With a feed cutting time of 5327 hours, this vertical machining centre is designed for efficient operations. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS machine we have for sale. Contact us for further details.
This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 Ã 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine.
This 5-axis Liechti go-Mill 350 was manufactured in 2009. It features a maximum blade length of 350 mm, with an optional configuration supporting up to 500 mm. The spindle speed reaches 20,000 rpm, and it includes a tool changer with 30 or 60 positions. If you are looking to get high-quality turbine blade processing capabilities, consider the Liechti go-Mill 350 vertical machining centre we have for sale. Contact us for further details.
This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details.
This 5-axis DMG MORI DMU 80T was manufactured in 2004. It features impressive travels of approximately 980 mm in the X-axis and 630 mm in both Y and Z axes. The machine includes a 4-position tool changer and operates with TNC 5.0 control. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 80T vertical machining centre we have for sale. Contact us for further details.
maximum number of results exceeded
please refine your search
1.000 € 
