130,466 used machines on RESALE, but how to find them? Machine Search
1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.
sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 118 by 160 mm 32 mm high -Drawing with the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 340/95/H220 mm -Weight: 15.4 kg
Table milling machine, table milling machine -Spindle: comes from a Lubimez bench milling machine -Table milling machine: with rigid spindle -Dimensions: 800/800/H400 mm -Weight: 95 kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 75 by 110 mm 25 mm high -Drawing with the photos -Dimensions: 215/70/H200 mm -Weight: 10 kg
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 6.3 kW 5800 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 540/260/H150 mm -Weight: 43 kg
TOOLMET GATO GC-G-M-2040 oxy-fuel cutting machine was built in 2020 in Poland by Toolmet Sp. z o.o. This extremely efficient machine is an excellent choice for businesses placing emphasis on high accuracy and repeatability of the produced parts. It enables precise, 4-axis shape cutting of workpieces made of thick steel sheets. The machining process is performed fully automatically by means of a reliable gas torch according to pre-programmed cutting programmes. The work table with a length of 4000 mm and width of 2000 mm is equipped with a sectional extraction system with 6 pneumatically controlled sections. This solution effectively eliminates any contamination generated during the cutting process, ensuring a high level of safety and great user comfort. In order to guarantee smooth movements and high positioning accuracy, a lubrication-free drive system and powerful servo motors in all l ...
Folding machine Shoei Model Mach Eight Year 1995 Serial 7092 Size Min: 150 x 210 mm / Max: 470 x 640 mm Feeder suction wheel + stream feeder Folding configuration 2 plate buckles + 1 knife Delivery detachable belt delivery Details Vacuum pump, noise hood, electronic speed control, sheets separations head Condition Rollers, belts, vacuum roller are all good Available direct
- Make: Copper mill - Type: Vuin-plus 600 - Year of construction: 1991 - Working width: 600 mm - Working height: 250 mm - Working height 4-sided: 200mm (up to 250 mm possible) - Number of working shafts: 5 (+2 chamfer units at the top) - Wave arrangement: bottom-up-right+left-down - Lower and upper knife shaft with 4-reversible Leitz Sinus knives - Right and left planer head with 4 reversible blades - Lower fifth shaft for saw blades, profiles, plaster shaft, etc. - Spindle diameter: X-X-40-40-40 mm - Motor power(s): 11-15-11-11-11 kW - Chamfer motors top: 2 x 1.85 KW - Feed speeds: 4-30 m/min - Feed motor: 4 kW - Driven rollers in the table: 3 - Top feed rollers: 4 - Pull-out transport rollers: 2 - Table height constant: approx. 900 mm - Weight: approx. 3800 kg
Gebr. Wabäma Circumat Elektronik 380.260, with circular knife, 1.5 kW, machine no. 04020665
DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...
- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...
Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
Control Siemens Sinumerik 828D Speed [rpm] 12000 Travel X/Y/Z [mm] 900/460/520 Tool pick-up BT40 General: Control system Sinumerik 828D X/Y/Z travel 900/460/520 mm Speed 12,000 rpm Tool holder BT40 Spindle: Belt spindle technology Speed 12,000 rpm Power 18 kW Torque 117 Nm Rapid traverse X/Y/Z 36/36/30 m/min Tool holder BT40 Tool magazine: Technology Chain Magazine (ATC TYPE) Number of stations 30 pieces Work table: Clamping area 1050 x 460 mm Table load 600kg Equipment / Accessories: Chip disposal chip conveyor Coolant supply IKZ plant Setup operation Electronic handwheel Miscellaneous Rinsing gun
roll diameter: 76-86 mm Shaft diameter: 20 mm Shaft revolutions: 11 U/min Bending capacity round tube: 30 mm : 25x6 mm Angle iron: 20x20x4 mm Drive: 0,18 kW range L-W-H: 530x420x500 mm weight: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fully Automatic Bread Slicing Machine Manufacturer: TREIF Type: DISKUS – SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm Automatic bread gripper suitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process Easy cleaning without having to move the machine 400 volts / 0.9 kW / 10 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2010 Function checked, machine is thoroughly cleaned and ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
X-axis: 13,000 mm Y-axis: 4,500 mm Z-axis: 1,000 mm Distance between stand: 6,500 mm C-axis: 190º A-axis: 110º Rapid speed XYZ: 15,000 mm/min. Rapid response AC: 10 tpm CNC control: Siemens 840D Spindle mounting: HSK A63 Spindle speeds: 30,000 rpm. Spindle power: 20 kW Tool changer: 20 positions Torrestool tables: 16 pieces X-axis: 11,500 mm Y-axis: 3,500 mm Z-axis: 750 mm Country of origin Spain Machine dimensions LxWxH: 19,000 x 11,000 x 6770 mm Machine weight: 70,000 kg
Sales Description ------------------- This large CNC axis drive spindle originates from a high-precision gantry-type milling machine and has been fully refurbished, including complete replacement of all bearings. With a total length of approximately 367 cm and a robust construction designed for heavy-duty machining, it is ideal for machine builders, retrofit projects, and industrial users seeking a reliable, ready-to-install spindle unit. The spindle is stored in our warehouse in Bavaria, Germany, and is available for immediate delivery. Transport organization can done by IBA - the costs to be paid by the customer. Further detail information are provided in the attached datasheet as PDF-File. -------------------------------------------------------------------- Sales description This large CNC final drive spindle comes from a high-precision gantry milling machi ...
SODICK AQ325L wire EDM was built in 2002 in Japan by Sodick Co., Ltd. The machine, distinguished by its exceptional precision and reliability, is an excellent choice for the production of parts with complex geometries, i.e. dies, punches and tools. The electrical erosion technology used in the machining process enables difficult shapes to be achieved in even the hardest materials. This method also minimises or completely eliminates the need for other secondary processes, such as polishing. The SODICK AQ325L is designed for machining workpieces with a maximum weight of 450 kg. The machining process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.30 mm. The workhead moves in five axes X,Y,Z,U,V with feeds of 350 mm, 250 mm, 220 mm, 80 mm and 80 mm respectively. The use of a dielectric increases the surface quality and dimensional accuracy of the w ...
Grinding length: 500 mm Grinding diameter: 300 mm Grinding wheel diameter: 400 mm Equipped with: - Bezel - Grinding wheels Country of origin: Germany Machine LxWxH: 2300 x 1700 x 1700 mm Machine Weight: 3500 kg
- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...
Grinding range: 400 x 200 mm Magnet table: 400 x 175 mm Height adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm. Equipped with: - Coolant device - Band filter - Hydraulic system - Operating instructions Country of origin: Germany Motor power: 1.5 kW Machine LxWxH: 2200 x 1500 x 2100 mm Machine Weight: 1100 kg
CNC machining centre HERMLE U 1000 T – universal milling machine For sale is a high-quality CNC universal machining center from the renowned manufacturer Hermle, model U 1000 T. The machine impresses with its stable design, high precision and versatile applications. Ideally suited for toolmaking, single part production and demanding milling work. General information: Machine Type: CNC Machining Center / Universal Milling Machine Manufacturer: Hermle Model: U 1000 T Year of Make: 1999 Control: Heidenhain TNC 426 Condition: Used, good general condition, functional Shipping time: Immediately available Technical data: Travel (X / Y / Z): approx. 1000 / 630 / 550 mm Table size: approx. 1200 × 630 mm Tool holder: SK 40 Spindle speed: up to approx. 7000 rpm Tool magazine: approx. 16 places Quill stroke: approx. 75 mm Milling head: swivel 0 – 90° (unive ...
Model: Vision FD Vario 3D YOM: 2011 Availability: In Stock ID Number: SMS00364 S/N: 90643 Tube Type: GF-181-06-125-65 Tube Housing: Vision Pluse 3-110 Tube YOM: 2011 (Original tube) Condition: Complete and fully functional
SCM Long Belt Grinding Machine LS-2500 Product name: Long belt grinding machine Type: LS-2500 Manufacturer: SCM (Villa Verucchio, Spain) Machine number: KK /003701 Condition: used, completely refurbished technical details: - Workbench length: 2,500 mm - Workbench height (depth): 800 mm - vertical stroke of the workbench: 720 mm - Length of sanding belt: 7,100 mm - Width sanding belt: 150 mm speed sanding belt: 18 m/sec - Crank depth: 800 mm - Crank height: 126 mm - Diameter of pulleys: 250 mm - 2 x suction opening a 120 mm Engine data: - Voltage: 380 V - Current: 7.1/5.3 A - Power: 3/2.2 kW - Frequency: 50 Hz - Speeds: 2800/1400 rpm Installation dimensions (W x D x H): 3,835 x 2,231 x 1,650 mm (without suction connections!) Transport dimensions (W x D x H): 3,900 x 1,500 x 1,850 mm (mounted on metal carrier!) The machine was completely refurbished and ...
Reference ID PP-57928 Category Flatbed Die Cutter Manufacturer Gietz Model FSA 790 EFF Year Built 2001 Color - Impression - Working Hours - Speed 5,500 sheets/h Max. size 790 x 560mm Min. Size 297 x 210mm Condition Good Location Europe Availability Immediately Machine Description hot foil stamping and cuting MABEG feeder Transverse foil: 2 axes Longitudinal foil: 3 axes Foil printing option: 2× honeycomb Die-cutting option: Included (die-cutting tool added) Hologram unit: Electronics renewed in 2020 Heating system: 6 heating zones Maximum sheet size: 790 x 560mm Minimum sheet size: 297 x 210mm Maximum stamping area: 720 x 520mm Speed up to 5,500/ hr
Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz
maximum number of results exceeded
please refine your search
