vertical mill used for sale

Manufacturer: Hurco Model: VMX1 Year of manufacture: 2004 Type of Machine: CNC milling machine Control unit: Hurco Ultimax Spindle taper: SK 40 Spindle speed: max. 10,000 rpm Milling feed: max. 11,400 mm/min Table size: approx. 760 × 355 mm Travel distances: X 660 mm / Y 355 mm / Z 455 mm Tool changer: 16 positions Motor power: max. 13 kW Weight: approx. 3,400 kg Condition: - Used, good overall condition - Fully functional and ready for use Equipment / Accessories: - coolant pump - chip conveyor - machine vice - 3D probe - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon request Find more here - / Contact us at -

Manufacturer: Hurco Model: VMX24i Year of construction: 2021 Type of Machine: CNC milling machine Controller: Hurco Max 5 Spindle taper: SK 40 Spindle speed: max. 12,000 rpm Working feed rate: max. 38,000 mm/min Table size: approx. 760 × 510 mm Travel distances: X 610 mm / Y 508 mm / Z 610 mm Tool changer: 30 positions Machine power: max. 19 kW Weight: approx. 4,750 kg Condition: - Used (like new), very good overall condition - Fully functional and ready for use Equipment / Accessories: - High-pressure cooling system for coolant supply through the spindle (20 bar) - Cooling air via coolant nozzles or through spindle - Workpiece position detection with 3D probe - Tool measurement using touch probes - Chip conveyor (scraper belt conveyor) - Machine vises - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon req ...

Manufacturer: Mikron Model: UME600 Year of manufacture: 1995 Type of Machine: CNC milling machine Control unit: Heidenhain TNC407 Spindle taper: SK 40 Spindle speed: max. 5,000 rpm Feed rate: max. 10,000 mm/min Table size: approx. 900 × 530 mm Travel paths: X 600 mm / Y 500 mm / Z 450 mm without automatic tool changer Motor power: max. 9 kW Weight: approx: 3,200 kg Condition: - Used, good overall condition - Fully functional and ready for use Equipment / Accessories: - coolant pump - machine vice - 3D probe - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon request Find more here - / Contact us at -

HERMLE UWF 802 M universal milling machine with HS 401 route control -HS 401- Track control -Travel X / Y / Z 500x430x400mm -Rigid angle table -Speed range 18-3550 rpm -Feed continuously variable in all three axes 0-1600 mm/min -Rapid traverses 0-1.6 m/min in all three axes -Vertical - Horizontal milling device -Tool holder ISO 40 -Hydraulic tool clamping -Central lubrication -Chip tray -Drive power 6 KW -Work light -Spindle protection -Documentation Dimensions LxWxH 1.9x1.8x1.9 meters / Weight: 1800Kg

Key data: 250 mm

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg

Offered is a horizontal knee-type milling machine: Table clamping surface X/Y: 300mm/1250mm, travel X/Y/Z: 800mm/275mm/400mm, table load: approx. 250-300kg, T-slots: 3pieces/18mm width/63mm spacing, spindle mount: ISO40 (steep taper40), spindle speeds: 12steps, speed range: 45-2000rpm, feed range (longitudinal/transverse): 14-900mm/min, feed range (vertical): 4-250mm/min, machine weight max.: approx. 2400kg, machine dimensions X/Y/Z: approx. 2000mm/1700mm/1700mm. Inspection possible by appointment.

Sales Description ------------------- This compact CNC spindle unit comes from a precision milling machine and has been fully refurbished, including complete replacement of all bearings. With a total length of 221 cm and a robust construction designed for reliable industrial use, it is ideal for machine builders, retrofit projects, and users seeking a ready-to-install spindle for small to medium CNC applications. The spindle is stored in our warehouse in Bavaria, Germany, and is available for immediate shipment. Transport can be organized by IBA - costs have to be covered by the customer. Further information can be seen in the datasheet attached as PDF-File --------------------------------------------------- Sales description This compact CNC spindle unit comes from a precision milling machine and has been completely overhauled, including the complete replacemen ...

Manufacturer: Optimum Model: OPTImill F 105 CNC Sinumerik 808D ADVANCE Type of Machine : Milling Machine Condition : New Included Accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 Liters Cutting and Drilling Emulsion AQUACUT C1 - 4th Axis Preparation Find more here - / Contact us at -

Offer 26051 Technical data: - Feed of the milling unit manually - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - max. Milling height 150 mm - max. Milling depth 110 mm - max. Milling length 500 mm - Angle-adjustable stop Li + Re 20 - 90 ° - Milling spindle speed 2800 rpm - Drive 400 V 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle 10 l - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

A CNC vertical milling machine POS is available. Travel X/Y/Z: 1050mm/530mm/630mm, table dimensions X/Y: 1150mm/560mm, max. table load: 700kg, tool holder: SK40, tool stations: 30, speed: 10000rpm, feed rate: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 7600kg, control: Heidenhain. Documentation available. An on-site inspection is possible. The machine has a defect.

Top maintained MAHO MH 500 M Immediately available from location without accessories shown x-travel 500 mm y-travel 380 mm z-travel 350 mm Control Maho 134 Main spindle: Speed range - main spindle 63 - 4,000 rpm/-1 Drive power - main spindle 3 kW Gear stages 2 Tool holder SK 40 Quill stroke 50 mm You can swivel it. h/v Work table: Table clamping area 800 x 360 mm T-slots 14H7 - 5 / 63 max. table load 200 kg Feeds: Feed speed 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ) 4 / 2 / 4 m/min Total power requirement 5 kW Machine weight approx. 1.6 t

Rotor laboratory shredder RETSCH ZM 200 (ZM200) Model: ZM200. Rotational speed: from 6000 to 18000 rpm Initial size: up to 10mm Final fineness: < 40μm With new standard cassette With stainless steel file rotor, 12 teeth Without sieves Power Consumption: 1300W Dimensions: 410 x 515 x 365mm Weight: 38Kg Year of manufacture: 2015 In excellent condition

Low-speed pre-shredder for rubber, plastic, cables, composite material Well suited for exposing material composites, e.g. tires, old cables With integrated safety shear coupling to protect against foreign objects Rotor 600 mm diameter x 1450 mm working width Closed rotor with offset segment blades, mounted on cassettes 24 rotor blades, 2 stator knife rows Swivelling strainer basket, perforations of your choice With pressure device (pendulum swingarm) Drive cable 90- 200 kw

Low-speed pre-shredder for rubber, plastic, cables, composite material Well suited for exposing material composites, e.g. tires, old cables With integrated safety shear coupling to protect against foreign objects Rotor 600 mm diameter x 1450 mm working width Closed rotor with offset segment blades, mounted on cassettes 24 rotor blades, 2 stator knife rows Swivelling strainer basket, perforations of your choice With pressure device (pendulum swingarm) Drive cable 90- 200 kw

Table 840 x 420 mm Travel X/Y/Z 600 / 410 / 520 mm, Spindle SK 40, speed up to 60001 rpm, Main drive 8.5kW, Tool changer 22 places Control Heidenhain TNC 370 incl. coolant device

A CNC universal tool milling machine Emco is available. Travel X/Y/Z: 450mm/300mm/350mm, table dimensions X/Y: 800mm/400mm, speed: 2500rpm, tool holder: SK40, quill stroke: 100mm, milling head swivel: +/-90°, feed: 400mm/min, rapid traverse: 4m/min, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1700mm, weight: approx. 1500kg. An on-site inspection is possible.

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

Control Fanuc Spindle diameter ... 100mm Axis X ... 1270mm Axis Y ... 910mm Spindle speed ... 0-2000 rpm. Axis W ... 730mm Axis Z ... 900mm ISO 50 Max. table load ... 3000kg Clamping table surface ... 1000x1120mm Machine weight ... 11500kg L x W x H ... 5000 x 3000 x 2800mm Main engine power... 18.5kW Total power requirement ... 31kVA More info on request. The machine is ready for the viewings.

Diameter van de frontplaat: 700 mm minimale/maximale buisdiameter: 300 gt; 600 mm spindelsnelheid: 50 Hz: 12/23/45/85 tpm 60 Hz: 15/28/53/102 tpm beweging van turret: 180 mm Spindel beweging: 120 mm vermogen: 3,7 kW lengte: 2215 mm breedte: 1700 mm hoogte: 1400 mm gewicht: 2800 kg

X-axis: 425mm, Y-axis: 400mm, Z-axis: 240mm, Spindle speed: 42000rpm, Probe: Renishaw, Number of tools: 40, Spindle interface: HSK40, with paper filter. An on-site inspection is possible.

X-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24000rpm, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle taper: HSK 40, total connected load: 85kVA, weight: 33t, with paper filter. an on-site inspection is possible.

One-hand milling machine MAKITA 3708 FC built in 2013, 500 W

Flat dowel cutter / groove cutter BOSCH GUF 4-22 A, 620 W

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill -Manufacturer: Greiner, Angle end mill, cylindrical end mill, 2 pieces -Type: W242 Ø60x16xØ22 / Ø48x16xØ22 -Hole: Ø 22 mm -Price/Fee: complete -Transport dimensions: 110/60/H30 mm -Weight: 0.5 kg

A deposit of €250.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-5

A deposit of €180.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-4

A deposit of €1500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Rotary table diameter 700 mm 24-position tool changer Cutting speed 15000 mm/min Fast feed speed 30000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-8

A deposit of €450.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-6

Working area 1Longitudinal700 mmCross420 mmVertical380 mmGeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 10000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmIntegrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-axRotary joint, 4 channelsRotary joint for integrated swivel rotary table with torque drives 4- channe ...

Inv. Num. : 9073 Type: FP 4 MA Producer: DECKEL Created: 1998, GO 2003 Parameters: Control system: HEIDENHAIN Work table length: 800 mm Work table width: 465 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 465 mm Y-axis travel: 370 mm Z-axis travel: 380 mm Machine height: 1734 mm Machine length: 2000 mm Machine width: 1600 mm Machine weight: 1720 kg

CNC travelling column milling machine with turntable concept used for machining CFRP components, suitable for machining plastic, CFRP and aluminium. Control Siemens 840D sl. Machine with complete enclosure with loading gate. Milling spindle 15 kW with max. 24000 1/min. 5-axis milling head S2 for aluminium profile machining CFRP and plastic. Tool holder HSK63F. Pick u-Up tool changer for 12 tools. Traversing axes X,Y,Z,A,B,C. Table swivel beam 180° rotatable (A-axis) with zero clamping system arranged on both sides to accommodate the workpiece clamping device. Dimensions table or swivel beam 3200 x 1200 mm. 8 zero-point clamping systems on each side of the table. Chip transport via belt conveyor. Dust extraction via compact dust extractor Tonga BG 32/ST/36ST. Lubrication system Vogel. Workpiece clamping via vacuum. Vacuum generator Schmalz. Very good condition available from June 2026. T ...

5-axis gantry milling machine Fooke Endura 905 linear Year of manufacture 2007 Control Siemens 840D CNC Table size: 5,000 x 3,000 mm 2-axis NC swivel milling head: A-axis +95°/-120° (0.001°) degrees C-axis +/- 275° (0.001°) degrees Distance between uprights: 4,700 mm Distance spindle - table: 1,419 mm Travels: X 5,000 mm Y 3,000 mm Z 1,500 mm Linear motors for fast feeds : X/Y/Z 65,000 mm/min. Rapid traverses: X/Y/Z 65,000 mm/min. Spindle drive power: 28 kW Spindle speeds: max. 18,000 rpm Spindle torque: max. 89 Nm Tool holder: HSK-A63 Tool positions: 20-fold autom. Tool Changer Machine weight: approx. 95,000 kg Space requirements: L x W x H 8,850 x 9,370 x 6,200 mm Accessories: Full fairing 3 x chip conveyor CNC control on swivel arm Protective covers for drives and s ...

6 x tensioning tower 680 height, 360 x 360 at the foot with Starrack Heckert pallet 400 x 400

For sale is a high-quality universal tool milling machine from the renowned Swiss manufacturer Mikron, model WF 2 SA. The machine impresses with its high precision, stable construction and versatile applications and is in a well-maintained and functional condition. Ideally suited for toolmaking, single part production, repair work and training companies. General information: Machine Type: Universal Tool Milling Machine Manufacturer: Mikron Model No.: WF 2 SA Year of construction: approx. 1985 Condition: Used, well maintained, fully functional Availability: Immediately available Technical data: Travel (X/Y/Z): approx. 420 / 250 / 340 mm Table size: approx. 635–700 × 250 mm Spindle speed: 50 – 2,240 rpm Tool holder: SK40 (ISO 40) Feed: infinitely variable Rapid traverse: approx. 1,400 mm/min Motor power: approx. 3.5 kW Machine data: Weight: approx. 1,0 ...

Manufacturer NICOLAS CORREA Model RAPID50 Year of Manufacture 2.005 CNC HEIDENHAIN 530 HSCI Table Table surface 5,000 x 2,000 mm Number of slots T 11 Slot size T 22 mm Maximum weight on the table 30,000 kg. Routes and advances Longitudinal Course (X-Axis) 5,000 mm Transverse Course (Y-Axis) 3,100 mm Vertical Course (Z Axis) 1,200 mm Distance between columns 2,800 mm. Fast Forward Axles (X) 20,000 mm/min Fast Forward Axles (Y, Z) 30,000 mm/min Head UAD II automatic head included UAD II head positioning 0.1º / 0. 1st Speed 6,000 rpm No. of ranges 2 Power 32 kW ISO 50 head cone Hydraulic head clamping Head 2 – vertical chuck INCLUDED Accessories Automatic tool loader INCLUDED Loader positions 30 Automatic head changer INCLUDED 2 longitudinal chip evacuators INCLUDED 1 x Cross Chip Evacuator INCLUDED Internal cooling 20 bar INCLUDED Portable electronic  ...

Qty. 1 Second-hand Sendzimir Cold Rolling Mill Mfc.: INNSE Type: ZR23 C-25 – 20-Hi Built: 1977 Stopped: 2025 Steel grades: HSLA, low and high carbon steel, etc. Strip width: 300 - 650 mm Thickness: 0.05 – 3.0 mm Max. tensile force: 15.000 kg Coil weight: 10 T AGC & PLC system: ABB

Rotox KF 347 copy and lock milling machine, year of manufacture: approx. 1992, speed: 12000rpm, machining dimensions X/Y/Z: 315mm/130mm/200mm, max. workpiece cross section X/Y: 200mm/100mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible.

Speed: 355-1800/min, nominal voltage: 380V, 50Hz, 3 AC, control voltage: 220/24V, protection class: IP54, nominal current: 100A, control: Heidenhain TNC 355, weight: 2.95t, with handwheel, coolant system, hose nozzle, hydraulic/lubrication unit, pressure accumulator/ hydraulic accumulator, solenoid valves, Bosch components and ORSTA directional control valve. An on-site inspection is possible.

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.14500 KgTool changerTool changer planevertical Type of gripperDouble gripper Number of tools90 Max. tool length370 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis 1.000 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 ...

Key data: 300 mm, 1130 mm, 300 mm

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

Excellent condition - Fully operational - Loading / Transport possible! Minimum diameter : 5 mm Maximum diameter : 80 mm Minimum length : 350 mm Maximum lenght : unlimited Productivity : 1/13 mt./min Tool rotation motor : 5,5 Kw Gear motor : 0,75 Kw Motors voltage : 400V/50 Hz

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools30 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9Distance between T-Slots 63 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreeRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +/- 120 degreeDirect measuring systemDirect path measurin ...

Machine type: Universal milling machine Manufacturer: ALCERA (AMSTUZ / LEVIN) Model: 6S Year of manufacture: 1979 Table size: approx. 1100 x 265 mm Longitudinal travel (X): approx. 700 – 800 mm Cross travel (Y): approx. 200 – 250 mm Vertical travel (Z): approx. 400 mm Spindle: Horizontal spindle with vertical milling head Spindle taper: ISO 40 Spindle speed: approx. 30 – 1000 rpm (multi-stage gearbox) Feed: Mechanical feed on X/Y/Z axes Control: Heidenhain digital readout (3-axis DRO) Condition: Used, visible signs of wear and chips Remarks: Robust conventional milling machine suitable for toolroom and general machining; equipped with digital readout for improved positioning accuracy Approx. own mass: 1800 – 2200 kg Approx. dimensions (LxWxH): 2000 x 1800 x 1800 mm Auction-ID: A7-45364-9

This 4-axis DN SOLUTIONS 3100 LY turn-mill centre was manufactured in 2023. It features a maximum turning diameter of 420 mm and a turning length of 1285 mm. The machine is equipped with a 12-inch main spindle chuck and a rapid traverse speed of 30 m/min in both X and Y axes. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS 3100 LY machine we have for sale. Contact us for further details.

Steinel SH4 milling machine. Good condition. With lots of accessories. The machine runs and does what it is supposed to.

This 4-axis DN SOLUTIONS PUMA 5100 MB was manufactured in 2023. It features a maximum turning diameter of 650 mm and a turning length of 952 mm. The machine is equipped with a 21-inch main spindle chuck and offers a rapid traverse speed of up to 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 5100 MB turn-mill centre we have for sale. Contact us for further details.

Milling cutters, End mills, drop cutters, Unused Mostly Kestag, Seco, Sandvik, Walter, Böhlerit, ... different diameters, singles, sets or entire batches ! Please request a list !

This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details.

Control Heidenhain TNC 640 Speed [rpm] 5000 Travel X/Y/Z [mm] 4500/1800/1300 General: Control Heidenhain TNC 640 Travel X/Y/Z 4,500/1,800/1,300 mm Speed 5,000 rpm Tool holder SK 50 Milling head (spindle): Technology Diagonal head with gear spindle Pitch 0.001° Speed 5,000 rpm Tool holder SK 50 Power max. 43 kW Torque max. 1,045 Nm Media Feedthrough KSS + Blown Air Work table: Clamping area 6,000 x 1,100 mm T-slots 6x 22H12, spacing 140 mm Tool magazine: Technology Chain Magazine Number of stations 40 Tool changer double gripper (horizontal/vertical) Tool diameter max. 125 (250) mm Tool length max. 400 mm Equipment / Accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system with filter, 20 bar Workpiece Measurement Radio Probe M&H Setup operation Electronic handwheel HR 510 Adaptive Cont ...