132,800 used machines on RESALE, but how to find them? Machine Search
table length: 1500 mm table width: 1500 mm table load: 10 t voltage: 380 V Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain D.R.O. Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 12000 mm y-travel: 2000 mm z-travel: 1000 mm control: E.C.S. 2351 taper ISO: 50 P.D.B. Table dimensions: 450 x 450 mm spindle speeds: 0 - 1500 mm total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m Mist extraction Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mm spindle travel: 1130 mm column travel: 6000 mm headstock travel cross: 1700 mm column travel on cross-slide: 400 mm spindle speeds: 2,24 - 450 (27x) U/min volt: 380 V total power requirement: 14 kW weight of the machine ca.: t dimensions of the machine ca.: m Facing head D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mm spindle travel: 1000 mm column movement horizontal: 7000 mm headstock - vertical: 2500 mm/min cross travel column: 450 mm taper ISO: ISO 50 P.D.B. total power requirement: 25 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 8000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 27,6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 890,820 mm turning length: 4000 mm control: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mm cross movement: 500 mm quill stroke: 140 mm tailstock adjustment: 3708 mm spindle turning speed range: 5-1800 U/min milling tool taper: 1500-6000 U/min feed: 0,5-5000 mm/min rapid traverse: 15 m/min feed power: 22000/10000 N Tool changer: 95 St. steady: CNC tail stock: CNC total power requirement: 50/69 kW weight of the machine ca.: 23,5 t dimensions of the machine ca.: 10x4x3,3 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, produc ...
This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained.
x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2200 mm, 600 mm, 600 mm
Travelling column milling machine Manufacturer Ibarmia Type ZV40 Year of construction 2000 Control Heidenhain TNC 410 Table size 2600 x 650 permissible. Load 2300kg Travel X/YZ 2200/600/600 Tool holder SK40 24 Way Tool Changer max speed 8,000rpm Partition wall for pendulum operation Electronic Handwheel HR410 Chip conveyor Glass scales in all axes Guide of the Y-axis would have to be redone In 2018, the machine got a new guide in Z and X axis, and a new main spindle. Machine is fully functional except for the linear guide of the Y-axis. Machine has the following dimensions: L x W x H 4200 x 3000 x 3050, weight 12000kg. Without the vices in the photos.
GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machineDMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnosticsIoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar
Boring spindle diameter: 130mm, tool holder: SK50, centering: 500mm, travel X/Y/Z: 250mm/160mm/380mm, travel W/U: 1000mm/320mm, feed rate: 2m/min, rapid traverse: 5m/min, max. diameter drilling/facing: 800mm/1400mm, torque boring spindle/facing support: 3100Nm/6150Nm, clamping plate dimensions X/Y/Z: 3500mm/1750mm/350mm, weight: approx. 30000kg, controls: Bosch. Including angle head, extension piece, steep taper tool holder for SK50 (without tools), 4x plate fields with the dimensions 1080mm/2000mm and boring apparatus. Documentation available. An inspection on site is possible.
Description Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2022 #001283 Location: Germany TECHNICAL DATA: Technical data Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Facilities Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - SK40 - Coolant tank - IKZ pump 20bar - Filter for coolant - Bed flushing via M-function switchable - coolant spray gun - spindle blowing air switchable via M-funct ...
GeneralUniversal Milling Machine; Control: CELOS X with Siemens 840D SL Operate Technical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minClamping SystemHSK-A 63 Rapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgWorking area 1Longitudinal650 mmCross520 mmVertical475 mmDirect measuring systemDirect path measuring systemBenefit PackageBenefit Package consisting of: Swarf conveyor, with cleaned slot screen Internal coolant supply 40bar/600l Air blast through spindle centre Application Tuning Cycle 3D quickSET (pre selection, measuring probe)Spindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp ...
BMEI BV100 CNC vertical machining center was built in 2007 in China by BMEI CO., LTD. The machine is used for precision machining of workpieces with a maximum weight of 700 kg. The machining process is performed inside a large workspace, which has been fully maximised to ensure the freedom of performed operations. Inside it, there is a stable work table with a length of 1300 mm and a width of 610 mm and with five T-slots for quick and easy attachment of tooling. The spindle, driven by a high-powered motor, reaches a speed of as much as 15000 rpm and moves in three X,Y,Z axes with feeds of 1050 mm, 510 mm and 560 mm respectively. The capacious 21-position tool magazine, on the other hand, allows storage of a large number of tools with a maximum diameter of 160 mm. A short tool change time of just six seconds reduces machine downtime to a minimum. All this is complemented by an advanced FA ...
Used machine DMU40eVo with EROWA Magazine Machine type: CNC machining center 5-axis vertical Model: DMU40eVo with EROWA Manufacturer: DMGMORI Control: CELOS Heidenhain TNC640 Year of Make: 2019 Location: Germany #001371 Options: -Motor spindle speedMASTER® HSK-A63 -Spindle speed 20-20,000 min-1 -NC swivel rotary table -Tool magazine 210 places -Scraper chip conveyor -Internal coolant supply (IKZ) paper belt filter 20-80bar -Advanced chip flushing -Blowing air through the center of the spindle -Rotating lens -Oil and emulsion mist separator mechanical - Infrared touch probe -Tool breakage detection TRS2 -Preparation 3D quickSET -Signal light, four-color -DMG MORI automation interface -Pneumatic control of the PowerChuck 210 zero-point clamping system -EROWA Robot Compact (ERC80) -Magazine:15x rack level PC210 with 3 pos. each = total 45 pos. Changes, Thi ...
Used machine DMGMORI NHX6300 Machine type: CNC machining center horizontal Model No.: NHX6300 Manufacturer: DMGMORI Control: CELOS MAPPS Year of Make: 2021 Location: Germany #001396 TECHNICAL DATA: Travels: X-axis: [mm] 1050 Y-axis: [mm] 900 Z-axis: [mm] 1030 B-axis 0.001° Rapid traverse: (X/Y/Z) [m/min.] 60 Speed range: [1/min.] 12,000 Drive power: [kW] 55/30 Tool holder: HSK100 Tool Changer Tool Positions: 120 Pallet system Number of pallets: 2 Pallet size: [mm] 630 x 630 Machine weight: [kg] 18,700 Facilities Control F31iB with CELOS spindle cone HSK-A100 preparation for coolant system by the spindle rotary table with full-fledged 4th axis 120-fold tool magazine (HSK-A100)- Coolant Washer Nozzles for Mist Separator INTERLIT TMF300/980 Setup Station Connection Compact filter system 70 bar-INTERLIT coolant cooler 15 kW in-machine measuring system (spindle ...
Used machine CNC machining center horizontal Manufacturer:DMGMORI Type:NH4000DCG Year of construction:2021 Control Type:FANUC F31iB Origin: Japan Location:Germany Delivery Time Technical data Traversing range X-axis approx. 560mm Y-axis approx. 560mm Z-axis approx. 630mm Table 360° 1° Workpiece diameter approx. 630mm Workpiece weight max. approx. 400kg Speed max. approx. 14,000 rpm Spindle motor approx. 18.5/11KW Number of tool positions approx. 40 Rapid traverse approx. 50m/min Mounting Taper BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 34kVA Footprint L x W x H approx. 2,360×3,914x2,711m Machine weight approx. 9,600 kg Automatic Rotary APC Tool Holder: BT40-Max. Spindle speed 14,000 min-1,-18.5/11 kW (10min/100% ED)-Number of Tools: 40 (Chain Type)-Table Indexing 1° Scraper Belt Conveyor with drum filter preparati ...
From now on we can arrange the following services for you! ✔ CAD/CAM programming Experts support you in programming your components – from the simple 2D contour to complex 5-axis simultaneous machining. We work with market-leading CAD/CAM systems and optimize your programs for maximum efficiency. ✔ Cost-per-part calculation We analyze your components with regard to cost-effectiveness. Together we determine your unit costs and help you to make optimal use of the machine and processes. ✔ Feasibility studies Before purchasing, we check the technical feasibility of your applications. How to get Certainty that the machine meets your requirements and that your production is sustainable supported. ✔ Programming Training Our training courses are aimed at beginners as well as advanced learners and are individually tailored to Adapted to your requirements. How to en ...
Used machine Universal Machining Center Machine type: DMG DMF 360 / 11 linear Control: Heidenhain TNC 640 Celos Year of Make: 2017 TECHNICAL DATA: Travels: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Dynamic Pack for DMF 360 linear (Y1100) Rapid traverse: (X/Y/Z) [m/min.] 80 / 60 / 60 Speed range: [1/min.] 20 - 15,000 Drive power: [kW] 46 / 30 Tool holder: SK 40 Tool Changer Tool positions: 60 NC rotary table Table size: [mm] 3,200 x 1,100 Max. table load: [kg] 1,200 Features: Internal cooling (IKZ): [bar] 40 Coolant tank: [l] 600 Chip conveyor Chip rinsing gun Oil mist extraction Air through spindle center Probe Spindle Preparation for use 3D quickSet Automatic doors Electronic handwheel This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Used machine Machine Type: CNC Machining Center Vertical Model: NVX5100 2nd with Matris robot cell Manufacturer: DMGMORI Control:DMG MORI Celos Year of construction / Ib: 2019 / 2022 #001312 Technical data Travel range X-axis approx. 1050 mm Y-axis approx. 530 mm Z-axis approx. 510 mm Table size approx. 1,350x600 mm Workpiece weight max. approx. 1,200 kg Speed max. approx. 12,000 rpm Spindle motor approx. 37/22 KW Number of tool positions approx. 30 Rapid traverse approx. 30 m/min Mounting cone approx. BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 45 kVA Footprint L x W x H approx. 3.1 x 2.85 x 2.6 m (without chip conveyor, without robot) Machine weight approx. 7,300 kg Main Drive with Higher Torque - Tool Holder Cone for BT-40 Tool Holder - Tool magazine with 30 places (#40) - Door for tool magazine - Hinged belt conveyor ...
Used machine Machine Type: CNC Machining Center Vertical Model No.: CMX1100V Manufacturer: DMGMORI Control:DMG MORI SLIMline® Multi-Touch Heidenhain Year of Make: 2022 #001358 Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for tightening bolts DIN 69872 - Direct position measuring system X-Y-Z - Magazine with 30 tool positions - Coolant supply through spindle (IS) bar 20 - Double switching filter - Coolant-blown air switching externally via M-function - Chip conveyor (scraper belt, left side) - Tank capacity left side chip conveyor 250 - Coolant spray gun for chip removal - Automatic cab roof - Signal light - Electronic handwheel - Button kit spindle and table Traversing range X-axis 1100 mm Y-axis 560 mm Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Footprint L x ...
Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 TECHNICAL DATA: 5. Axis 3 + 2 axes non-simultaneous X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 520 Rapid traverse: (X/Y/Z) [m/min.] 30 Max. speed: [1/min.] 12,000 Drive power: [kW] 13 Torque: [Nm] 82 Tool holder: HSK63 Tool positions: 60 NC swivel rotary table B-axis -10° / +95° C-axis 360° Table size: [mm] 800 x 620 Max. table load: [kg] 350 Space requirement (LxWxH): [m] 5.35 x 4.14 x 3 Machine weight: [kg] 4,700 Features: Chip conveyor Internal cooling (IKZ):40 [bar] Tool breakage detection Heidenhain TS 27 R Probe Heidenhain Blum Lasers for Tools Direct Path Measurement System Electronic handwheel Machine preparation for DMG MORI PH 150 - Automatic lifting door on the right - Robot interface (DMG MORI standard) - ...
Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 Optimal area of application. Bearing seats on long shafts, crankshaft bearing seats, balancer shafts, etc. TECHNICAL DATA: Max. turning length: [mm] 1,055 Turning diameter: [mm] 120 Max. Rotary Ø over bed: [mm] 285 Rapid traverse: (X/Z) [m/min] 20 Main spindle Max. speed: [1/min.] 3,500 Drive power: [kW] 7.5 / 5.5 Bar Passage: [mm] 43 Spindle Nose: A2-6 Number of turrets: 2 Tool positions: 6 + 6 Tool holder: Capto Tailstock This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Used machine Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of Make: 2008 TECHNICAL DATA: Travels: X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 560 Feed: (X/Y/Z) [m/min.] 90 Rapid Traverse: (X/Y/Z) [m/min.] 90 / 90 / 90 A-axis -10 B-axis +110 C-axis 360° Speed range: [1/min.] 28,000 Tool Changer Tool holder: HSK-A63 Tool positions: 60 Tool diameter: [mm] 80 / 140 Tool length: [mm] 300 NC rotary table Ø 750 Max. table load: [kg] 800 Table size: [mm] fixed tabe: 950 x 650 Max. table load: [kg] 1,000 Features: Chip conveyor This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
The FrymaKoruma MZM/VK7 is a laboratory and product development–scale toothed colloid mill, emulsifier, vacuum mixer or homogeniser designed for efficient liquid–solid phase refining, homogenizing, dispersing and emulsifying liquid to highly viscous products. It is suitable for the production of creams, ointments, gels, similar formulations or food products. The unit was previously operated in a mayonnaise production facility. The machine is mounted on a stainless steel frame equipped with two wheels, allowing for easy mobility. It features a double-jacketed conical hopper with an approximate working volume of 10 litres. The hopper is fitted with a lid incorporating a scraper agitator (0.09 kW, 380/220 V), a pressure indicator (–1000 mbar to 0 bar), and an inspection light with glass wiper. Two small open side hoppers with manual valves are provided for ingredient dosing. The syste ...
The Karl Schnell Type 046 KS FV-SERIES Emulisifer is designed for the fine art of fine emulsion; premincing, vacuumizing, mixing and emulifying all in one machine. Designed for the production of small batches, this machine of the FV-Serie complete thus the versatile KS offer which result in a constant quality level of the final product, creating of stable and homogeneous emulsions, flexibile applications and high productivity. This machine is previously used in a processed cheese plant in Europe. Hopper inside diameter 550 mm and inside height 400 mm. Volume of the hopper: ± 30 liter. The hopper has a direct steam injection nozzle, double jacketed and can handle vacuum. Motor: 4,1 / 8,2 / 14 kW - 120 / 230 / 400 V - 32 / 31 / 31 A - 710 / 1.440 / 2.550 rpm - 26 / 50 / 87 Hz. Simple control panel with buttons., Type of Machine: Emulsifier, Volume hopper: ± 30 liter, Motor: 4,1 / 8,2 / 1 ...
The machine is in good technical condition, testing is possible by prior arrangement.
Wanner Mühlen E45.80 Series No. 140431, 140432 and 140265 Sale due to closure Location
A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible.
Used parts: Milling shaft / 2-speed gearbox SelectaTilth / Final drive: gears, chain, side cover, cork seal etc.
This 3-axis Nicolas Correa Euro 2000 was manufactured in 1997. It features a Siemens 840 D control system and a Ganfior electro-spindle capable of reaching 10,000 rpm. The working envelope is 2000 Ã 1250 Ã 700 mm with a spindle taper of SK40. It supports a maximum table load of 4,000 kg and weighs 13,000 kg. If you are looking to get high quality milling capabilities consider the Nicolas Correa Euro 2000 machine we have for sale.Contact us for more information.
Ball Mill GMP Manufacturer: Pharmag consisting of Pharmag Universal Actuator Type UAM and the BM-5 Stainless Steel Ball Mill very good condition Documents available, incl. qualification.
Hommel Goldflocke GF 80 Super Wholegrain Fresh Flakes for all cereals Stainless steel version only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine
Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible.
The machine is in good technical condition, testing is possible by prior arrangement.
Comec FXT double-sided milling machine Number of milling units 4 Generator system: Right/Left/Up/Top Power of milling units 4×0.85kw Rotational speed 12000rpm Feed speed adjustable by variator
Manufacturer NICOLAS CORREA Model FP 35 UAGA Year 2006 CNC HEIDENHAIN iTNC-530 Table surface 4,500 x 1,500 mm Allowable weight on table 15,000 kg. Travel (X / Y / Z) 3,500 / 2,600 / 1,000 mm Pitch between uprights 2,300 mm Fast Forward Axles (X) 15,000 mm/min Fast Forward Axles (Y, Z) 12,000 mm/min Maximum Working Advance 5,000 mm/min UAGA Orthogonal Automatic Head INCLUDED Head with Automatic Rotation 2, 5º /2.5º Speed of the UAGA Orthogonal Head 3,000 r.p.m. ISO-50 Head Cone Main Motor Power 22 kW No. of Speed Ranges 2 Direct Output Head INCLUDED Head Speed Direct Output 5,000 r.p.m. Automatic Retractable Support l on the Right side for Orthogonal UAGA INCLUDED Automatic Retractable Support l on the Left for Direct Exit Head Cover. INCLUDED Automatic head pickup INCLUDED Automatic tool loader INCLUDED Loader positions 30 HEIDENHAIN HR 410 Portable Button Pad ...
This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information.
This HOMAG Optimat LPP306 was manufactured in 2019. A used planing and profiling machine featuring six working spindles, it handles workpiece widths up to 250 mm and heights up to 160 mm. Equipped with PowerControl and powerTouch LPP300 for enhanced control, it offers feed speeds from 6 to 24 m/min. Spindle speeds are adjustable up to 8,000 rpm, ensuring versatility and efficiency in wood milling applications. Contact us for more information about this machine.
This 3s MECOF CS 88 G Bed Type Milling Machine was manufactured in 1990. It features a working table length of 6,000 mm and a maximum permissible load of 8 tons per meter. The spindle motor power is 14.7 kW, with a speed range of 10 â 1,207 rpm. If you are looking to get high-quality milling capabilities, consider the MECOF CS 88 G machine we have for sale. Contact us for further details.
This 3-axis VHF CAM 20230 Bed Type Milling Machine was manufactured in 2004. It features a substantial weight of 450kg, ensuring stability and robust performance for precision milling. Consider the opportunity to buy this VHF CAM 20230 Bed Type Milling Machine. Contact us for more information.
Used Netzsch pearl mill type LME 200.The mill has a cooling jacket. Year of construction 1989.
This 3s JOBS THORA RT Bed Type Milling Machine manufactured in 2016 features a robust table measuring 1,200 mm by 1,200 mm, accommodating workpieces up to 5,000 kg. With a spindle speed of 5,000 rpm and a tool magazine capacity of 40 tools, it offers efficient milling capabilities. Consider the opportunity to buy this JOBS THORA RT Bed Type Milling Machine. Contact us for further details.
Universal tool milling machine DECKEL FP 4 MK with 3 axes active digital display Heidenhain TNC 113 Year of Make: 1990 Travel: X 500 Y 400 Z 400 Speed range: 50 – 2500 rpm With the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Hydraulic tool clamping Hydraulic vise GRESSEL 125 mm Various SK 40 milling mandrels Splash guard cabin Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions
Maho MH-C 700 All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 2-fold pallet changer and 180 magazine locations Year of Make: 2009 Control: Sinumerik 840D Technical data: Spindle speed: 0-18,000 min-1 Drive power: 35KW Torque: Spindle mount: HSK 63 Number of magazine slots: 180 pieces Number of pallets: 2 Pallet size: 500x500mm Travels: X-axis: 630mm Y-axis: 800mm Z-axis: 650mm C-axis: 0.001° All axes have linear actuators Accessories: -Coolant system -Chip conveyor Machine was regularly serviced Video available on request.
OMEGON Freesbank LxWxH = +/- 1500x 1500 x 2350 mm Table = 1150 x 260 mm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
maximum number of results exceeded
please refine your search
