vertical mill used for sale

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -Adapter -Adjustment: SK50 -1x tool holder: MK3 -1x tool holder: Ø 20 mm and with CNC pull studs -suitable for: tool changer -Sale: only complete -Weight: 6 kg

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg

Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO

Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).

-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -Adapter -Adjustment: SK50 -Tool holder: MK3 -Total length: mm -Sale: only complete -Weight: 4.8 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 80 x 160 mm -Number: 1x recordings available -suitable for: tool changer -Price: per piece -Weight: 9 kg/piece

Tool holder, milling holder, milling tool -Number: 5x SK50 holders -different recording sizes see pictures -Reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 19.7 kg

SPECIFICATIONS: Engine power HP: 3 Vertical leadership support Replacement tools available

Tool holder, milling holder, milling tool -Adapter -Adjustment: SK50 -Tool holder: MK4 -MK4 with tightening thread -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 1x recordings available -Price: per piece -Weight: 4 kg/piece

Tool holder, milling holder, milling tool -Adapter -Adjustment: SK50 -Tool holder: Ø 32 mm -Number: 2x recordings available -Sale: only complete -Total length: mm -Weight: 6.5 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 50 x 125 mm -Number: 1x recordings available -Price: per piece -Weight: 4.6 kg/piece

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin with tip: 40 x 143 mm -Number: 1x recordings available -Price: per piece -Weight: 3.7 kg/piece

I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.

Tool holder, milling holder, milling tool -Number: 7x SK50 holders -different recording sizes see pictures -Reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 28 kg

Tool holder, milling holder, milling tool -Number: 2x adapter mounts SK50/SK45 -Number: 22x SK45 holders -different designs -Drill chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Weight: 90.2 kg

Shell end mills, shell mills, milling cutters -Number: 8 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 120-125 mm -Different producers -Price: complete -Weight: 22 kg

Shell end mills, shell mills, milling cutters -Number: 18 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 100-125 mm -Different producers -Price: complete -Weight: 57.6 kg

Shell end mills, shell mills, milling cutters -Number: 9 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 76-100 mm -Different producers -Price: complete -Weight: 13.3 kg

Shell end mills, shell mills, milling cutters -Number: 12 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 75-110 mm -Different producers -Price: complete -Weight: 21.3 kg

COMEC Pearl Mill M 8 Stainless steel Double jacket Container capacity 8 l Very good ready-to-use condition, directly from production!

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Shell end mills, shell mills, milling cutters -Number: 28 pieces finishing cutter/roughing cutter -Socket: Ø 22 mm -Various diameters: 49-80 mm -Different producers -Price: complete -Weight: 10.5 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 145 by 175 mm 29 mm high -Drawing with the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 265/125/H230 mm -Weight: 15.8 kg

Universal milling angle head, milling angle head -Recording: MK4 -Drive mount: MK5 -Angle head: swiveling -Dimensions: 440/300/H310 mm -Weight: 68 kg

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Dzk8qe Stator knives: 2 Drive: 7.5 kW Double slope With roller feeder, electric switch box and soundproofing box

Vollrath Perlmühle VMSM 2/8 B Ex protected version Double chamber Grinding pot 2 x 8 l Double jacket Power 18.5 kW Very good ready-to-use condition, directly from production!

Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.

Qty. 1 Second-hand 4-Hi Non-Reversing Rolling Mill – still in operation! Mfc.: Lheung-Maschinery, Yushin Heavy Electric, Mitsubishi Built: Not specified! Rebuilt: 2017.08 Material: Aluminum & Aluminum Alloy Line speed: 80 m/min. Strip width: 550 mm Thickness: 0.3 – 6.3 mm Coil size: ID 508 mm OD 1500 mm Weight:

ORDER NO. 6623 TECHNICAL DATA - diameter range of machined pins 200mm - min length of input material 1100mm - infinitely variable feed speed + front/rear - knife head drive motor 15kW - feed motor 1,7kW Successively: - 2 toothed pulling shafts - 4-knife head - 2 smooth pulling pin shafts - electrically adjustable knife head - electrically adjustable shafts - dimensions length / width / height 3570x1300x1700mm - weight about 4000kg ADVANTAGES – German production - the possibility of turning poles into a cone – used turner, very good condition Net price: 159900 PLN Net price: 35533 EUR depending on the price 4,50 EUR (Prices may fluctuate with higher fluctuations)

Key data: 560 , 1500

Mixing mill 560 x 1500 mm Buzuluk Type 14203 Roller bearing Motor: 132 kW Motorized NIP adjustment

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 215 to 274 mm, 41 mm high -Drawing with the photos -Number: 2x counter bearings available -Price: per piece -Dimensions: 505/180/H295 mm -Weight: 19 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 32x38 mm -1x holder: Ø 50x45 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -1x: holder suitable for tool changer -Sale: only complete -Weight: 8 kg

Colloid mill Manufacturer: Probst&Class (PUC) Type: K 150/0 Power: 13 kW with cross-toothed grinding set (good condition) with on-off button & small switchgear standing on feet with hopper (diameter: 660 mm) LBH: 660 x 650 x 1450 mm

small handy machine from Swabia

Corundum disc mill & excenter screw pump Manufacturer: Fryma Type: MK-200 Power: 15 kW with double jacket (heating & cooling) new grinding discs, with new spare grinding disc pair with pressure gauge with vessel (LBH: 730 x 730 x 900 mm) with excenter screw pump: speed-controlled, with sight glass Power: 0.55 kW LBH: 1100 x 230 x 270 mm LBH corundum disc mill: 650 x 450 x 950 mm

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for tool changers -with CNC pull studs -Sale: only complete -Weight: 8 kg

Tool holder, milling holder, milling tool -Number: 5x SK45 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 14 kg

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 10 kg

Tool holder, milling tool holder -Number: 21x SK50 recording -various versions -Drill chucks, surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -Price/Sale: complete -Weight: 82 kg

Colloid mill Manufacturer: Fryma Type: MZ-150/B Inline machine, horizontal Power: approx. 22-28 kW (type plate missing) with cross-toothed stator, normally toothed rotor installed on movable aluminium frame, on fixed castors with cable & plug Weight: approx. 350 kg LBH: 1000 x 550 x 650 mm

Colloid mill Manufacturer: Probst & Class (PUC) Type: JVM Item No.: 59201 Power: 9 kW with hopper with outlet chute with switchgear, cable & plug Rotor normally toothed, stator cross-toothed Weight: approx. 150-200 kg LBH: 600 x 430 x 960 mm

TABLE 500 X 800 ISO 40 CNC1600

Corundum disc mill Manufacturer: Koruma Type: T-3 Item #: 564 Year of construction: 1974 Power: 13 kW very good condition with funnel with outlet chute (coolable) with cable & plug LBH: 700 x 500 x 1350

Corundum stone mill + excenter screw pump + vessel Corundum stone mill Manufacturer: Fryma Type: MK-250 Year of construction: 1995 No.: M16732 Pressure working space: 4 bar Pressure double jacket: 6 bar Power: 18.5 kW with double jacket & double-acting mechanical seal with switchgear with outlet chute with grinding gap adjustment with pressure gauge with sight glass Excenter screw pump Manufacturer: Netzsch Type: NL 30 A Year of construction: 1995 Power: 1.1 kW Vessel LBH volume: 750 x 750 x 650 mm System on movable stainless steel frame LWH: 1500 x 700 x 1650 mm

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Adjustment: SK50 -Tool holder: M20 -Price: for both recordings -Weight: 16 kg

Bead Mill Manufacturer: Fryma Type: MS-18 Machine No: M16500 Year of construction: 1994 Pressure grinding chamber: max. 2.5 bar Pressure double jacket: max. 2 bar Motor power: 11 kW with switchgear & documentation Grinding space in very good condition with emergency stop button with temperature meter, with pressure gauge LBH: 1100 x 780 x 1350 mm

Machine Details Warehouse number 1105-03692 Machine type Milling machine - Universal HERMLE brand Type fp 1000 Year of construction 1988 Control type CNC Control heidenhain 355 Storage location HAGUENAU Country of origin Germany Delivery time IMMEDIATELY Freight base EXW Technical details x-travel 700 mm y-travel 630 mm z-travel 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping surface: 1000 x 490 mm Spindle speed gear stage 1 25 - 400 1/min. Spindle speed gear stage 2 401 - 1260 1/min. Spindle speed gear stage 3 1261 - 4200 1/min. Feed 5 m/min Rapid traverse 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with coolant device Sale without clamping devices

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.