vertical machining center used for sale

New Anthracite Double-Leaf Vertical Slat Gate A modern and durable double-leaf gate manufactured from high-quality steel profiles, finished in an elegant anthracite color. The vertical slat (comb-style) design ensures both aesthetic appeal and structural strength, making it suitable for residential and commercial applications. Specification: Gate type: double-leaf, vertical slat (comb-style) Leaf construction: steel profiles 60 mm ×40 mm Posts: 100×100 mm, height 2 200 mm Finish: anthracite (powder-coated) Included: 2 × gate leaves 2 × steel posts 4 × adjustable hinges 1 × gate stop Packaging: The gate is securely packed on a wooden pallet and prepared for safe transport. Auction-ID: A1-50711-30

New Anthracite Double-Leaf Vertical Slat Gate A modern and durable double-leaf gate manufactured from high-quality steel profiles, finished in an elegant anthracite color. The vertical slat (comb-style) design ensures both aesthetic appeal and structural strength, making it suitable for residential and commercial applications. Specification: Gate type: double-leaf, vertical slat (comb-style) Leaf construction: steel profiles 60 mm ×40 mm Posts: 100×100 mm, height 2 200 mm Finish: anthracite (powder-coated) Included: 2 × gate leaves 2 × steel posts 4 × adjustable hinges 1 × gate stop Packaging: The gate is securely packed on a wooden pallet and prepared for safe transport. Auction-ID: A1-50711-51

Auction-ID: A1-50750-82

Diameter approx. 2600mm, total height approx. 5550mm., without piping. Auction-ID: A1-50393-77

Capacity 12,500L, equipped with bottom outlet and sight glass on 5 legs Auction-ID: A1-50393-66

Diameter approx. 1700mm, total height approx. 3150mm. Equipped with agitator. Auction-ID: A1-50393-96

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-55

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-58

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-56

Equipped with side-mounted motor with agitator, cooling coil, snuff valve, bottom outlet and sight glass on 8 legs Auction-ID: A1-50393-61

Dimensions per piece approximately 1600x2100x4900mm, without piping Auction-ID: A1-50393-97

Suitable for empty boxes up to approximately 40x30cm. With control cabinet, without upper roller conveyor between standing columns, otherwise complete, with supply belt. Consists of two lifts (seen in photos) and frame 6000 mm height 1000mm width 1000mm length Auction-ID: A1-47393-359

Diameter approx. 2600mm, total height approx. 5550mm., without piping. Auction-ID: A1-50393-78

Diameter approx. 1650mm, total height approx. 4800mm. Auction-ID: A1-50393-74

UVA Packaging Newton 400 Vertical Packaging Machine – 2003 Industrial automatic vertical form, fill and seal machine (VFFS), suitable for packaging products in foil bags. Specifications: Brand: UVA Packaging Model: Newton 400 Year of construction: 2003 Machine number: 2003 511 Connection: 400 V, 3-phase, 50/60 Hz Power: 15 kVA Compressed air consumption: 600 Nl/min Control: Siemens MP 377 12\" touchscreen Production capacity: up to approximately 120 bags/min Bag width: approx. 100–400 mm Maximum bag length: approx. 600 mm Maximum film width: approx. 840 mm Maximum film roll diameter: approx. 700 mm Version: Equipped with automatic film feed, product feed via upper hopper, sealing mechanism, output belt, control cabinet, pneumatic components and transparent safety guard. CE marked, produced in the Netherlands. Capacities and pack sizes are indicative based on the mod ...

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-52

Compact VFFS machine that forms, fills and seals bags, This Audion turns a reel of film into pillow bags: the film is formed around the filling tube, sealed along the seam and closed at the bottom, after which the product drops into the bag from above. Suitable for dry, free-flowing products such as pasta, snacks or cut vegetables, fed by a weigher or doser., It is built compactly on a stainless frame with castors and has a touchscreen with adjustable seal temperatures. We did not find a rating plate with the model or year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/audion-vertical-form-fill-seal-machine/ , Type: Vertical form fill seal machine (VFFS), Bag style: Pillow bag, Film transport: Two pull belts along the filling tube, Controls: Touchscreen, adjustable seal temperatures, C ...

Work table and adjustable saw blade guide. Table Length: 500 Table width: 500 The machines are generally offered without documentation. If documents are available, they are attached to the respective machine. Auction-ID: A7-50868-9

LYON-FLEX vertical chain mortising machine, intended for slotting wood. Frame with slotting head, work table, clamps and visible manual adjustments. Manufacturer: LYON-FLEX S.A. Year: 1985 Serial No.: 8999 Equipment: slotting chain, adjustable table and clamping devices Visual condition: second-hand workshop machine with visible signs of use. Auction-ID: A1-50714-4208

Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system with LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit, transparent protective enclosure and connected conveyor belt. Inspection possible by arrangement.

Numerical Control: HAAS X /Y/Z Axis Travels: 750 × 410 × 500 mm Max. Spindle Speed: 10,000 rpm 4th Axis: HAAS-compatible (presence shown) Spindle Hours: Approx. 19,678 h (meter reading) User documentation: present Weight (kg): Approx. 5600 Year & Manufacturer: 2000 – HAAS Auction-ID: A1-50714-4050

ACMA vertical woodworking band saw, model 700 saw , with saw table and adjustable blade guide. Manufacturer: ACMA – Ateliers de constructions mécaniques d'Annecy Model: 700 mm saw Equipment: sawing table, adjustable blade guide and band saw handwheels Visual condition: used workshop machine with visible signs of use. Auction-ID: A1-50714-4209

- Minimum pitch height 2800mm. - Traction power 3 KW. - 48 V battery, with JUNGHEINRICH SLT 100 JH battery charger. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-61

CNC Vertical Machining Center Order: Heidenhain TNC 426 Axes: 3 Table (mm): 1100 × 600 X/Y/Z strokes (mm): 1000 × 600 × 800 Spindle: ISO 40, max. 8,000 rpm Tool magazine: 40 positions Equipment: Chip conveyor Serial number: Remarks: Used machine, Auction-ID: A1-50714-4030

The ALZMETALL AB4/SV is suitable for operations such as drilling, countersinking, reaming, and similar machining tasks. Thanks to its robust construction, the machine provides a stable foundation for precision work on a variety of workpieces. Year of manufacture: 1995 Spindle taper: MT4 Operating voltage: 400 V Rated current: 10 A Fuse protection: 16 A gG Design: Stationary floor-standing machine Condition: Used Overall dimensions: 2050 x 1130 x 750 mm Table surface: 720 x 560 mm

- Total installed power 9 KW. - Cutting length approx. 2500 mm. - Maximum cutting width approx. 2200 mm. - Maximum cutting depth 50 mm. - Maximum postforming cutting depth 42 mm. - Main disc unit: 300 mm disc diameter, 5.50 KW-04900 rpm motor. - Scoring disc unit: disc diameter 125 mm, motor 0.55 KW-05600 rpm. - Postforming disc unit: 300 mm disc diameter, 1.10 KW-04800 rpm motor. - Saw carriage: feed speed 12 m/min. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-70

Essegi vertical bag form-, fill- and seal machine for liquids, model: F 700 Pneumatic, serial number: 26/2010, 400 V, 3 Ph, film width: 644 mm, pipe clearance: 220 mm x 95 mm, vertical seal: 620 mm, horizontal seal: 355 mm, total dimensions: 2450 mm x 1300 mm x 2800/2320 mm. Used for milk in 500 ml bags.

PFM vertical bag form-, fill- and seal machine for liquids, model: Zenith milk, serial number: C 8413, year of construction: 2007, 380 V, 50 Hz, 8 A, 4.5 kW, weight: 800 kg, film width: 460 mm, pipe diameter: 130 mm, (2x) 100 mm and (1x) 60 mm, vertical seal: 400 mm, horizontal seal: 250 mm, total dimensions: 2000 mm x 1400 mm x 3000 mm. With extra parts.

PFM vertical bag form-, fill- and seal machine, model: PV 260, serial number: 3938, year of construction: 1994, 380 V, 10.5 A, 4 W, film width: 300 mm, pipe diameter: 75 mm, vertical seal: 160 mm, horizontal seal: 260 mm, total dimensions: 1800 mm x 1600 mm x 1830 mm. With infeed belt, inside dimensions: 1560 mm x 700 mm x 410 mm, plastic belt with dividers, belt width: 250 mm, compartments:(2x) 75 mm x 90 mm x 50 mm, elevating height: 2300 mm, total dimensions: 3750 mm x 1430 mm x 2500 mm.

Ilapak vertical bag fill-, form-, and seal machine, model: Vegatronix 2000/400, diameter filling pipe: 170 mm, vertical seal length: 400 mm, horizontal seal length: 400 mm, mesh bag width: 600 mm, plastic belt, belt width: 300 mm, elevating height: 700 mm, total dimensions: 3900 mm x 1640 mm x 1870 mm.

Skyjack - SJ12 Year 2012 - Internal No. 3898 Platform height: 3.66 m Ground clearance: 5 cm Abrasion-free tires Auction-ID: A1-50910-33

JLG - 1230ES, Year 2008 - Internal No: 69130 Platform height: 3.66 m Load capacity: 230 kg (1 person + 150 kg payload) Climbing ability: 25 % Ground clearance (retracted): 6.5 cm for indoor use only electric direct drive Hole entry protection abrasion-resistant solid rubber tires Auction-ID: A1-50910-19

JLG - 1230ES, Year 2008 - Internal No: 69128 Platform height: 3.66 m Load capacity: 230 kg (1 person + 150 kg payload) Climbing ability: 25 % Ground clearance (retracted): 6.5 cm for indoor use only electric direct drive Hole entry protection abrasion-resistant solid rubber tires Auction-ID: A1-50910-18

JLG - 1230ES, Year 2008 - Internal No: 69132 Platform height: 3.66 m Load capacity: 230 kg (1 person + 150 kg payload) Climbing ability: 25 % Ground clearance (retracted): 6.5 cm for indoor use only electric direct drive Hole entry protection abrasion-resistant solid rubber tires Auction-ID: A1-50910-20

JLG - 1230ES, Year 2010 - Internal No: 69144 Platform height: 3.66 m Load capacity: 230 kg (1 person + 150 kg payload) Climbing ability: 25 % Ground clearance (retracted): 6.5 cm for indoor use only electric direct drive Hole entry protection abrasion-resistant solid rubber tires Auction-ID: A1-50910-21

Calpeda 7.5 kW Stainless-Steel Vertical Multistage Industrial Pump Manufacturer: Calpeda Model: M132 V1-7.5T IE3 Equipment type: Vertical Multistage Centrifugal Pump Motor power: 7.5 kW Motor efficiency class: IE3 Location: 91701 Trnava Industrial vertical multistage centrifugal pump designed for water circulation, pressure boosting and process applications. Equipped with a stainless-steel multistage hydraulic section and high-efficiency Calpeda three-phase electric motor. Features / applications: Vertical multistage construction Stainless-steel hydraulic section 7.5 kW three-phase electric motor IE3 high-efficiency motor Industrial water circulation Pressure boosting Process water applications Condition: Used only a few times. Reported to have been working when last used. Current operational condition has not been independently verified. Sold as photographe ...

JLG - 1230ES, Year 2008 - Internal No: 69135 Platform height: 3.66 m Load capacity: 230 kg (1 person + 150 kg payload) Climbing ability: 25 % Ground clearance (retracted): 6.5 cm for indoor use only electric direct drive Hole entry protection abrasion-resistant solid rubber tires Auction-ID: A1-50910-50

JLG - Toucan 10E (T10E), year 2014 - Internal no. 69090 Compact design, almost silent operation and precise control make it ideal for indoor use with perforated protection abrasion-resistant solid rubber tires Climbing ability: 25 % Swivel range: 345° enables flexible working across obstacles Auction-ID: A1-50910-32

DRUKOV BRNO 2,000 L Pressure Vessel Manufacturer: DRUKOV BRNO Equipment type: Pressure Vessel Year: 2015 Serial number: 18616 Location: 91701 Trnava Industrial pressure vessel with a nominal volume of 2,000 litres. Manufactured in accordance with pressure equipment requirements and CE marked. Technical specifications: Volume: 2,000 L Maximum allowable pressure (PS): 16 bar Test pressure (PT): 23 bar Maximum allowable temperature (TS max.): 50°C Minimum allowable temperature (TS min.): 0°C Weight: 575 kg Fluid group: 2 Year of manufacture: 2015 CE marking: CE 1015 Condition: Used extensively over a long period. Reported to have been working when last used. Current operational condition and pressure certification status have not been verified. Auction-ID: A1-50694-118

JLG - 1230ES, Year 2010 - Internal No: 69147 Platform height: 3.66 m Load capacity: 230 kg (1 person + 150 kg payload) Climbing ability: 25 % Ground clearance (retracted): 6.5 cm for indoor use only electric direct drive Hole entry protection abrasion-resistant solid rubber tires Auction-ID: A1-50910-22

Braviisol - Leonardo Lui Mini, built in 2010 - Internal no. 1585 With a dead weight of less than 500 kg, compact dimensions and extreme manoeuvrability, this vertical mast can be easily manoeuvred even through low doors, lifts and in the tightest of spaces. Platform height: 2.87 m Platform length (extended): 1.72 m Ground clearance: 3 cm Climbing ability: 35 % Batteries Non-marking tires Auction-ID: A1-50910-51

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

turning diameter:250 mm swing diameter:250 mm turning height:200 mm total power requirement:37,7 kW chuck diameter:315 mm spindle speed max.:5500 1/min travel -x axis:625 mm travel -y axis:+100/-80 mm travel -z axis:250 mm worktool system:VDI 30+40 weight of the machine ca.:8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024

max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024