vertical machine center used for sale

Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H90 mm -Weight: 13 kg

Machine vice base plate, clamping plate, vice plate, turntable -with: T-round groove -Dimensions: 330/240/H40 mm -Weight: 10kg

Max Size 520 x 850 mm Min size 100 x 120 mm 4 Buckles Noise hoods High speed feeder head Digital counter with program 1 Electronic knife Hook on shingle belt delivery Implant machine Very good conditions

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 111 by 134 mm 20 mm high -Drawing with the photos -Dimensions: 290/90/H225 mm -Weight: 12 kg

Number of milling spindles: 2 St. fence: 1 ja workpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten  ...

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto von bereits gelieferten Maschine (600mm Spitzenweite) mit gegebenenfalls anderen Optionen. Geometrisch überholt und neu lackiert. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Dre ...

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und ne ...

We sell a pietroberto fork kneader. The machine is ideal for flatbread doughs. Used and overhauled / Warranty

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 145 by 190 mm, 30 mm high -Drawing with the photos -Dimensions: 290/85/H210 mm -Weight: 12 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW at 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.7 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.3 kW at 2800 rpm at 50 Hz -Voltage: 380 volts -Receiving shaft: Ø 24 mm -Tool: Ø 118 mm -Dimensions: 380/200/H240 mm -Weight: 25 kg

Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm

Reference Num.: 3384 Brand: Herzog Heymann Type: M3 + S18 Construction year: 1969 Available: directly Status: In production Location: Deutschland Equipment: - 4 Falztaschen - Flachstapelanleger - Schuppenauslage - Falzwerk Typ S18 mit 4 Taschen

Reference Num.: 3527 Brand: MBO Type: T 500 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - Format 50 x 70 cm

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Connection plug broken -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 148 by 178 mm by 30 mm high -Bore diameter: 45 mm -Drawing with the photos -Dimensions: 300/80/H255 mm -Weight: 14 kg

x-travel: 500 mm y-travel: 500 mm z-travel: 350 mm table surface area: 800 x 450 mm spindle taper: ISO: 40 quill stroke: mm feed - longitudinal/cross: mm/min feeds vertical: mm/min turning speed range: max. 3150 U/min voltage: 380 V / 50 Hz power capacity: 4 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 99999 mm grinding length: 99999 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, stable vice, drill press vice -Vice: rotatable -Jaw width: 200 x 55 mm -Clamping depth: max. 170 mm -Dimensions: 600/270/H210mm -Weight: 81 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1 kW 17030 rpm at 300 Hz -Voltage: 165 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 280/60/H110 mm -Weight: 4.3 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: each 150 by 181 mm 48 mm high -Drawing with the photos -Dimensions: 390/115/H310 mm -Weight: 34 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 125 by 160 mm 25 mm high -Drawing with the photos -Dimensions: 300/110/H205 mm -Weight: 14 kg

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrically overhauled with ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erford ...

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/80/H170 mm -Weight: 4.7 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW at 11300 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.05 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 16 mm -Tool: Ø 70 x 25 mm -Dimensions: 285/60/H140 mm -Weight: 3.6 kg

grinding diameter: 250 mm grinding length: 1000 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the serv ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Geometrisch überholt und neu la ...

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Grinding discs: max. Ø 360 mm x 40 mm -Operating voltage: 380 volts -Dimensions: 760/450/H1080 mm -Weight: 200 kg

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg

Machine reamers, reamer, reaming tool, locating knife cutting set -Recordings: MK1/MK2/MK3 -partially with reversible inserts -various sizes as seen in photos -Sale: only complete set -Weight: 40 kg

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 700 E -E-motor: 2.0 / 1.35 kW -Plate diameter: 700 mm -Transport dimensions: 1040/780/H1300 mm -Weight: 69 kg

sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1500 mm bending angle max.: 135 ° total power requirement: - kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,7 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm weight of the machine ca.: 6,5 t CNC Steuerung Heidenhain TNC 426 Kühlmitteleinrichtung Spänewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crane arm for forkliftWeight 220 KGApplicable lifting force: 2500 KGAload: 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 950 E -Power: 2.4 kW -Plate diameter: 790 mm -Transport dimensions: 1190/1000 / H1410 mm -Weight: 87 kg

tube diameter: . mm wall strength: . mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 900 E -Power: 1.5 / 1.8 kW 1400/2850 rpm -Plate diameter: 835 mm -Transport dimensions: 1200/1000 / H1260 mm -Weight: 81 kg

Machine vise, sturdy vise, drill vise -Handover: in the current condition as viewed -Stop jaw: repair welding, support surface milled -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm -Weight: 21.7 kg

Welding rectifier, electrode welding machine, electrode welding rectifier -Manufacturer: Migatronic, welding rectifier type LDE 250 -Welding power: max. 250 A -Welding cable with electrode clamp -ground cable -Dimensions: 860/680/H650 mm -Weight: 164 kg

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...

Notching milling machine -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm

Machine vise, sturdy vise, drill vise -Machine vice: rotatable -clamping jaws 240 x 60 mm -Clamping depth: 285 mm -Dimensions: 630/315 / H200 mm -Weight: 73 kg

Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 200 x 55 mm -Clamping depth: 200 mm -Dimensions: 510/228/H190 mm -Weight: 64 kg