vertical lathes used for sale

Manufacturer: HEAD / KENT Model: CUV-10 (KMV 10) Year: 1999 Robust CNC vertical machining center, Meehanite cast iron construction, suitable for machining single parts and small to medium series. Numerical control: FANUC OMD Structure: Meehanite cast iron Turcite B-coated slides Rigid thread Portable electronic crank Full protective guard Sprinkler system Work light and end-of-cycle lamp Toolbox Races: X: 1,020 mm Y: 510 mm Z: 510 mm Distance between spindle nose and table: 105 to 740 mm Table: Dimensions: 1,200 × 600 mm T-slots: 18 mm – 3 grooves Max. permissible load: 1,000 kg Spindle: Speed: 30 – 7,500 rpm Transmission: ZF gearbox – 2 ranges Cone: BT 40 Engine power: 11 kW Feeds: Fast feed (X,Y,Z): 24 m/min Working feed: 1 – 10,000 mm/min Tool changer: Capacity: 20 tools Max. tool weight: 6 kg Bidirectional selection Machine dimensions: 2,880 × 2,420 × 2,980 mm Floor space ...

The ALZMETALL AB4/SV is suitable for operations such as drilling, countersinking, reaming, and similar machining tasks. Thanks to its robust construction, the machine provides a stable foundation for precision work on a variety of workpieces. Year of manufacture: 1995 Spindle taper: MT4 Operating voltage: 400 V Rated current: 10 A Fuse protection: 16 A gG Design: Stationary floor-standing machine Condition: Used Overall dimensions: 2050 x 1130 x 750 mm Table surface: 720 x 560 mm

JLG - 1230ES, Year 2010 - Internal No: 69147 Platform height: 3.66 m Load capacity: 230 kg (1 person + 150 kg payload) Climbing ability: 25 % Ground clearance (retracted): 6.5 cm for indoor use only electric direct drive Hole entry protection abrasion-resistant solid rubber tires Auction-ID: A1-50910-22

Calpeda 7.5 kW Stainless-Steel Vertical Multistage Industrial Pump Manufacturer: Calpeda Model: M132 V1-7.5T IE3 Equipment type: Vertical Multistage Centrifugal Pump Motor power: 7.5 kW Motor efficiency class: IE3 Location: 91701 Trnava Industrial vertical multistage centrifugal pump designed for water circulation, pressure boosting and process applications. Equipped with a stainless-steel multistage hydraulic section and high-efficiency Calpeda three-phase electric motor. Features / applications: Vertical multistage construction Stainless-steel hydraulic section 7.5 kW three-phase electric motor IE3 high-efficiency motor Industrial water circulation Pressure boosting Process water applications Condition: Used only a few times. Reported to have been working when last used. Current operational condition has not been independently verified. Sold as photographe ...

DRUKOV BRNO 2,000 L Pressure Vessel Manufacturer: DRUKOV BRNO Equipment type: Pressure Vessel Year: 2015 Serial number: 18616 Location: 91701 Trnava Industrial pressure vessel with a nominal volume of 2,000 litres. Manufactured in accordance with pressure equipment requirements and CE marked. Technical specifications: Volume: 2,000 L Maximum allowable pressure (PS): 16 bar Test pressure (PT): 23 bar Maximum allowable temperature (TS max.): 50°C Minimum allowable temperature (TS min.): 0°C Weight: 575 kg Fluid group: 2 Year of manufacture: 2015 CE marking: CE 1015 Condition: Used extensively over a long period. Reported to have been working when last used. Current operational condition and pressure certification status have not been verified. Auction-ID: A1-50694-118

Heidenhein TN 410 control, table working area 475x4600 mm, travels: X 3900 mm, Y 400 mm, Z 425 mm, distance between spindle nose and table surface 190 - 615 mm, tool magazine capacity 56, maximum table load - 900 kg, spindle taper ISO 40, maximum spindle speed 10500 rpm, main drive motor power 9.2 kW, maximum spindle torque 60 Nm machine dimensions - 7000x3000x3400mm, control cabinet - 3700x900x1900mm, hudraulic unit - 3500x2000x1500mm Auction-ID: A1-50601-23

Braviisol - Leonardo Lui Mini, built in 2010 - Internal no. 1585 With a dead weight of less than 500 kg, compact dimensions and extreme manoeuvrability, this vertical mast can be easily manoeuvred even through low doors, lifts and in the tightest of spaces. Platform height: 2.87 m Platform length (extended): 1.72 m Ground clearance: 3 cm Climbing ability: 35 % Batteries Non-marking tires Auction-ID: A1-50910-51

CNC VERTICAL MACHINING CENTRE Inv. No. 13.039M1 Make MAZAK Model AJV60/80 Control MAZATROL M-32 Year of manufacture 1989 Pallet size 1.250 x 2240 mm X-travel (longitudinal) 2.000 mm Y-travel (cross) 1,400 mm Z-travel (vertical) 508 mm Spindle ISO 50 TOOL CAT 50 Workpiece weight 15 kg R.P.M. 22 – 3.150 kW Volts Cycles Including: Chip conveyor spiral on-side of the table 40 Tool Magazine Auction-ID: A1-50718-8

Key data: 406 mm, 305 mm, 254 mm

CNC Vertical - Machining Center HAAS MINIMILL With path control HAAS Year of Make: 2006 Travels: X 406 Y 305 Z 254 Speed range: 30 – 6,000 rpm infinitely variable ( SK 40 ) With the following accessories: Rigid angle table 730 mm x 300 mm clamping surface Vertical tool changer with 10 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Pushbutton Renishaw OMP 40 ( 2021 installed ) Tool breakage detection Renishaw TS 27 R ( installed in 2021 ) NC Branch HAAS BJ. 2021 Coolant Setup 4 pcs machine shoes Operating Instructions

VERTICAL BAND SAWING MACHINE Inv. No. 12.895Z1 Make MÖSSNER Model SSF520 Wheel diameter 520 mm Table dimensions 750 x 800 mm Throad dept 510 mm Passage under upper guide 380 mm Cutting speeds Variables 18-160/240-2280 m/min Motor power 5.5 KW Net weight 1000 kg Max. thickness for fusion cutting 15 mm Including: Coolant Mushroom shaped emergency stop Auction-ID: A1-50718-30

Make BURGSMÜLLER Model VIWM 800-CNC Mach. No. 2000/4533 Year of Manufacture 7/2000 Control SIEMENS SINUMERIK 840D Chuck Dia. ø 500 mm Max. Dia. ø 840 mm Spindle Bore 70 mm Max. Height over Bed 415 mm Max. Height over Cross Slide 185 mm R.P.M. Stepless 0 - 100 kW 8,5 Max. Load 700 kg Milling Spindle: kW 12 Max. Load 800 – 3,200 200-800 Taper QSP 50/2500 IK Including: Tool Changer 10 pos. Chip Conveyor Auction-ID: A1-50718-6

Number of tools 240 Tool holder BT 50 \"BIG PLUS\" Tool coding space-coded Tool breakage monitoring MOP Number of pallets 6 pallets Pallet size 630 x 630 mm X-travel 1000 mm Y-travel 900 mm Z-travel 1000 mm NC – round table division 0.001 ° Gear stages 2 R.P.M. 50 – 6000 Torque 606 Nm Rapid traverse 60 m/min Zero point determination Renishaw MP10 Zero point clamping system System 3R kW 30/22 Auction-ID: A1-50718-2

CNC VERTICAL MACHINING CENTRE Inv. No.13.018M1 Make EUMACH Model MC-800P Control Heidenhain TNC360 Serialnumber 8056 X-travel 760 mm Y-travel 460 mm Z-travel 460 mm Table size 900 x 410 mm Spindle taper ISO 40 R.P.M. 0 – 8.000 kW 15 Volts 400 Cycles 50 Including: Linear guide way Rear splash guard and chip tray. Automatic lubrication. Telescopic way covers. Chip conveyor ATC 24 positions Auction-ID: A1-50718-37

VERTICAL MACHINING CENTRE Inv. No.13.107M1 Make MAZAK Model VTC-300C Control Mazatrol Fusion 640M X-travel 1740 mm Y-travel 760 mm Z-travel 660 mm Table size 2000 x 760 mm Spindle taper ISO 40 R.P.M. 40 – 12.000 kW 15/11 Volts 400 Cycles 50 Including: Machine cover Manuals Coolant tank Work light Chip conveyor Auction-ID: A1-50718-48

CNC VERTICAL MACHINING CENTRE Inv. No.13.017M1 Make EUMACH Model MC1300P Control Heidenhain 360 Serialnumber E3045 X-travel 1350 mm Y-travel 610 mm Z-travel 610+160 mm Table size 1500 x 700 mm Max loading weight 1500 kg Spindle taper ISO 50 R.P.M. 60 – 4500 Machine weight 9000 kg Dimensions 4400 x 3076 x 3000 mm kW 15 Volts 400 Cycles 50 Including: Automatic lubrication. Telescopic way covers. ATC 32 positions Auction-ID: A1-50718-36

Key data: 1400 mm, 700 mm, 700 mm

Manufacturer: Victor Model No.: Vcenter-140 Year: 2001 Condition: Used Stock number: 9605 Control system: HEIDENHAIN TNC 430 Work table length: 1650 mm Work table width: 650 mm X-axis travel: 1400 mm Y-axis travel: 700 mm Travel Z axis: 700 mm

Key data: 1040 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With track control Heidenhain iTNC 530 Year of Make: 2005 Travel: X 1040 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) NC Dividing head with tailstock Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

Used Rafailidis vertical router (spindle router / milling machine) for woodworking. • Brand: Rafailidis. • Vertical router used for routing, profiling, grooving and shaping of wooden parts in joinery and furniture production. • Condition: has not been in operation for several years; inspection and testing are required before use. • Model and technical details such as table size, spindle data, motor power and supply voltage are not recorded; please contact us. Auction-ID: A7-50988-136

pneumatic connection; maximum measuring height approx. 600 mm; Auction-ID: A1-50476-189

pneumatic connection; maximum measuring height approx. 600 mm; Auction-ID: A1-50476-55

- Total installed power 9 KW. - Cutting length approx. 2500 mm. - Maximum cutting width approx. 2200 mm. - Maximum cutting depth 50 mm. - Maximum postforming cutting depth 42 mm. - Main disc unit: 300 mm disc diameter, 5.50 KW-04900 rpm motor. - Scoring disc unit: disc diameter 125 mm, motor 0.55 KW-05600 rpm. - Postforming disc unit: 300 mm disc diameter, 1.10 KW-04800 rpm motor. - Saw carriage: feed speed 12 m/min. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-70

- Minimum pitch height 2800mm. - Traction power 3 KW. - 48 V battery, with JUNGHEINRICH SLT 100 JH battery charger. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-61

Machine is already in storage Including: Clamping tools Kawasaki charging and unloading robot RS 20N dim. 1200 x 800 x 1500 mm. Work table dimensions. 2000 x 800 x 900 mm. Auction-ID: A1-47366-51

- tank is empty - including conduit to first coupling, without other piping - dimensions approx. H400xØ210cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A1-50974-10

- tanks are empty - including piping to first coupling/valve - dimensions (without motor) approximately H120xØ75cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A1-50974-11

- tank is empty - including conduit to first coupling, without other piping - dimensions approx. H400xØ210cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A1-50974-9

With double pallet, HEIDENHAIN control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-51034-15

Fast tool change, FANUC Series Oi-MC control Excluding machining supports, magnetic tables and tools AVAILABILITY NOVEMBER 2026 Auction-ID: A7-51034-17

With double pallet, FANUC Series 18i-MB control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-51034-10

- tank is empty - including conduit to first coupling, without other piping - dimensions approx. H400xØ210cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A1-50974-8

- tank is empty - dented - including conduit to first valve, without other piping - dimensions approx. H430xØ200cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A1-50974-7

MITSUBISHI Control Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-51034-11

- tank is empty - dented - including conduit to first valve, without other piping - dimensions approx. H430xØ200cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A1-50974-6

MITSUBISHI Control Excluding machining and tooling supports and above-machine air filter AVAILABILITY END OF OCTOBER 2026 Auction-ID: A7-51034-12

Connection 400V; bale size 120 x 114 x 80 cm; filling opening 120 x 60cm; Max press pressure 26ton; bale weight up to 400 kg Auction-ID: A1-47366-10

This 3-axis Alzmetall GS 800/3 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN iTNC 530 control and a robust table surface area of 920 x 900 mm, supporting a maximum table load of 1,800 kg. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 800/3 machine we have for sale. Contact us for further details.

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 300 mm   material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1   drive power: 48 kW GRINDING SPINDLE 2   drive power: 48 kW COMPONENT-FEEDER   Feeder Design: rotary Feeder   feeder velocity max.: 20 mm/min   feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 5000 mm   total height: 3100 mm   total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment system HÜTTNER F6-157, YOM 2006

vertical machining center, year 2001, CNC 18i MA. Used machine. More info & price on IndustrialBuyer.

Vertical Positive Cold Display Case without Door Brand: Fogal Model: ALASKA 120 Power supply: Single phase (230V - 50Hz) Capacity: 444 L, 2 shelves Dimensions (W x D x H): 1250 x 790 x 1950 mm Weight: 231 kg Aesthetic appearance: Marked Used equipment sold as is, not refurbished and untested. Vesto reference: V4320 Auction-ID: A1-50906-203

MAKER : KOLOMNA YEAR : unkwon SYSTEM : F-18iT TABLE : 7,100mm SWING : 8,000mm LENGTH HEIGHT : 4,700mm LOADING CAP. : 150ton MAIN MOTOR : 225kW The turning height is a key feature of this valuable NC vertical lathe. Purchasing a new unit—which would be custom-built—would likely cost over 300 million yen and estimate to build as a lead time of more than two years. In its current condition, the machine does not require any urgent maintenance.

MAKER : KOLOMNA YEAR : unkwon SYSTEM : F-18iT TABLE : 7,100mm SWING : 8,000mm LENGTH HEIGHT : 4,700mm LOADING CAP. : 150ton MAIN MOTOR : 225kW The turning height is a key feature of this valuable NC vertical lathe. Purchasing a new unit—which would be custom-built—would likely cost over 300 million yen and estimate to build as a lead time of more than two years. In its current condition, the machine does not require any urgent maintenance.

- tank is empty - including conduit to first coupling, without other piping - dimensions approx. H400xØ210cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-8

USED AKIRA SEIKI PERFORMA V2.5XP MACHINING CENTER Year: 2011 Table dimensions: 910 x 400 mm Weight allowed on the table: 960 Kg Spindle power: 15 kW Spindle speed: 12,000 rpm Axis travel: X=760 - Y=445 - Z=520 mm Cone type: BT 40 Tool changer: 28 tools Equipped with 1 MITSUBISHI M70 CNC 1 Center coolant 1 Chip conveyor Auction-ID: A1-50950-1

- tanks are empty - including piping to first coupling/valve - dimensions (without motor) approximately H120xØ75cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-11

HAAS VF2SS VERTICAL MACHINING CENTER NEW Serial No.: 1166625 Year: 2020 Number of spindle hours: 1,000 hours Table Table dimensions: 914 x 356 mm Table weight: 680 kg Spindle Maximum spindle speed: 15,000RPM option Spindle taper: BT 40 Axes Axis travel: X=762 - Y=406 - Z=508 mm Fast feeds: X=35.6 - Y=35.6 - Z=35.6 m/min Tool magazine Tool changer: 30 tools Maximum tool weight: 5.4 Kg Equipped with 1 HAAS CNC 1 Spindle center coolant system 1 Chip conveyor Auction-ID: A1-50950-22

Technical data Manufacturer: Haas Automation, Inc. Model No.: VF-3YT Serial Number: 1126820 Date of manufacture: 03/2015 Travels: X 1,016 mm / Y 660 mm / Z 635 mm Table: approx. 1,372 × 610 mm, 7 T-slots, 80 mm spacing Spindle holder: 40-taper Power supply: 3-phase, 50/60 Hz, 354-488 V AC Full load current: 40 A Maximum load current: 70 A Control: Haas CNC Control Version: Vertical CNC machining center, YT version with extended Y-travel Configuration Equipment: Tool changer with tool holders, T-slot table, work area with cooling/lubrication device. Remarks - 2026 Buffer battery replaced - Without clamped or surface-mounted tools! Offer refers to the machine only! Note Only operating instructions, but no technical documents available. Information researched to the best of our knowledge and belief. No guarantee is assumed for completeness and corre ...

Positive Cold Vertical Display Case 2 Doors Brand: Diamond Model: PD12/B5-R2 Year: 2023 Power supply: Single phase (230V - 50Hz) Dimensions (W x D x H): 1200 x 570 x 2000 mm Weight: 258 kg Aesthetic aspect: Very satisfactory Used equipment sold as is, not refurbished and untested. Vesto reference: VA2068 Auction-ID: A1-50906-232

- tank is empty - dented - including conduit to first valve, without other piping - dimensions approx. H430xØ200cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-6

- tank is empty - including conduit to first coupling, without other piping - dimensions approx. H400xØ210cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-9

- tank is empty - including conduit to first coupling, without other piping - dimensions approx. H400xØ210cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-10