vertical lathes used for sale

This 4-axis Z-YANG V7L was manufactured in 2021. It features an X-axis travel of 750 mm, Y-axis travel of 430 mm, and Z-axis travel of 530 mm. The machine is equipped with a FANUC Oi MF5 control system, a powerful 11 kW spindle motor, and an automatic tool changer with 24 tools. If you are looking to get high-quality metalworking capabilities, consider the Z-YANG V7L vertical machining centre we have for sale. Contact us for further details.

This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information.

This 3-axis Hurco VM30I was manufactured in 2019. It features a table size of 1320 × 508 mm and a maximum table load of 1,800 kg. With an impressive X travel of 1270 mm, Y travel of 508 mm, and Z travel of 508 mm, this vertical machining centre is designed for high-quality machining capabilities. Consider the opportunity to buy this Hurco VM30I vertical machining centre. Contact us for further details.

This 3-axis Parpas P15 A was manufactured in 2009. It features a generous X-axis travel of 1,450 mm, Y-axis travel of 650 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1650 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Parpas P15 A vertical machining centre we have for sale. Contact us for further details.

Manufacturer: HAAS Model: VF6 SS Year of Manufacture: 2008 Machine Type : Vertical Machining Center - Control: Haas CNC Axis Travels - X axis: 64 inches (1,625 mm) - Y axis: 32 inches (813 mm) - Z axis: 30 inches (762 mm) Spindle - Spindle speed: 12,000 RPM - Spindle taper: 40 taper (CT40 / BT40) - Spindle type: inline direct-drive, high-efficiency (HE) - Spindle motor: 30 HP Tool Changer - Type: side-mount automatic tool changer (SMTC) - Configuration: high-speed Super Speed ATC Electrical Requirements - Voltage: 360/480V - Phase: 3-phase - Frequency: 50/60 Hz - Full load: 40 amps - Largest load / short circuit: 70 amps - Interrupting capacity: 10,000 amps - Enclosure: NEMA Type 1 - indoor use only Find more here - / Contact us at -

A vertical CNC 3-axis machining center Hurco is available. Travel X/Y/Z: 610mm/510mm/610mm, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, spindle interface: SK40, speed: 10000rpm, rapid traverse: 30m/min, feed rate: 15m/min. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2750mm, weight: approx. 4500kg, operating hours: 68619h. Documentation available. An on-site inspection is possible.

Inv. Num. : 8982 Type: GX 1000 Producer: Bridgeport Hardinge Created: 2007 Parameters: Control system: Siemens 810 D Number of stacking positions: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Cone: SK 40 With automatic change

Inv. Num. : 8973 Type: MCFV 1680 Producer: ZPS Created: 2010 Parameters: Work table length: 1800 mm Work table width: 780 mm X-axis travel: 1650 mm Y-axis travel: 810 mm Travel Z axis: 810 mm

This 3-axis Mazak VCS 530C vertical machining center was manufactured in 2015. It features a robust Mazatrol MATRIX 2 control system, a table size of 1300x550 mm, and a maximum table load of 1200 kg. The spindle operates at speeds up to 12000 rpm with ISO 40 taper, and the machine includes a 30-position tool magazine and dual pallets. Consider the opportunity to buy this Mazak VCS 530C vertical machining center. Contact us for more information.

This 4-axis WEMAS VZ 1000 vertical machining center was manufactured in 2007. It features an X-axis travel of 1000 mm, Y-axis travel of 610 mm, and Z-axis travel of 660 mm. The machine includes a robust table size of 1300 x 600 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1000 machine we have for sale. Contact us for further details.

This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details.

This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details.

This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret head tool changer. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 130 CNC profile machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VM-6 was manufactured in 2024. It features a spindle speed of 12,000 rpm and a robust table size of 1,626 x 711 mm, with a maximum weight capacity of 1,814 kg. The machine includes a tool changer capacity of 30+1 and a rapid traverse rate of 15.2 m/min. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG MORI HSC 20 was manufactured in 2019. It features a maximum spindle speed of 42,000 rpm and a clamping surface of 450 × 400 mm. The integrated tilting rotary table allows for a tilt range of -15° to +130°, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 20 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VF-1 vertical machining centre was manufactured in 2013. It features a HAAS control, a spindle power of 22.4 kW, and a spindle speed of 8100 RPM. The machine includes a carousel-type tool magazine with 20 positions and a coolant capacity of 208 liters. If you are looking to get high-quality milling capabilities, consider the HAAS VF-1 machine we have for sale. Contact us for more information.

This 3-axis Hurco VMX30i vertical machining centre was manufactured in 2016. It features a spindle speed range of 10 – 12,000 rpm and a spindle motor power of 13 kW. The machine offers an X-axis travel of 760 mm, Y-axis travel of 510 mm, and Z-axis travel of 610 mm, along with a table size of 1020 × 510 mm and a maximum table load of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX30i machine we have for sale. Contact us for further details.

Vertical Machining Center YCM - VMC 65A / Fanuc OM -CE marking -Control Fanuc OM -Operational condition / function video available -Travel X / Y / Z 650x410x615mm -Table dimensions 840x420mm -Speed range up to 6000rpm -Tool holder BT 40 -Tool magazine / side changer 16 compartment -Electric handwheel -Coolant device -Motor power 7.5 KW -Machine feet Dimensions: LxWxH 3.5x2.4x2.8 meters / Weight 4500Kg

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

Vertical baler Frihopress CL-46Product descriptionManufacturer: FrihopressType: CL-46Condition: used, functional, bakery conditionPress force: 8 tonsEngine: 1.5 kWAconnection value: 230 VGsuitable for: cardboard, plastic, cans, residual waste etc. Areas of application: hotels, restaurants, hospitality, bakeries, food markets, pastry shops, etc. Outer dimensions: width 74 cm, depth 90 cm, height 174 cmSee pictures for details.

Travel X/Y/Z: 1600mm/400mm/425mm, table dimensions X/Y: 2000mm/400mm, max. table load: 350kg, tool positions: 12, tool holder: SK30, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2800mm, weight: approx. 5000kg, control: Siemens Sinumerik. The hoses, the Y-axis cover, and the battery (data loss) are in need of repair. An on-site inspection is possible.

A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible.

Key data: 1016 mm, 610 mm, 710 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1300 x 600mm Axis X ... 1016mm Axis Y ... 610mm Axis Z ... 710mm Spindle speed ... 0-10000 rpm controlled axes ... 3 IKZ ISO 40 Magazine spaces ... 24 Machine weight ... 5500kg

ID3740 Botec-Scheitza drill mount for auger and down-the-hole hammer drilling (max. diameter 130 mm), without impact mechanism (rotary motor only), 20 m drill rod 110 mm (without drill head) Drilling rig for worm and down-the-hole hammer drilling (max. diameter 130 mm), without impact mechanism (rotary motor only), 20 m drill pipe 110 mm (without drill head)

The machine is in good technical condition, testing is possible after prior agreement. The machine is mechanically worn (play in the table axes approx. 0.1 mm). The gearbox is currently not shifting (when trying to change gear, there is no signal about shifting).

Key data: 1050 mm, 510 mm, 510 mm

Inv. Num. : 9045 Type: VCN-510C Producer: MAZAK Created: 2005 Parameters: Control system: MAZATROL 640M NEXUS Work table length: 1300 mm Work table width: 550 mm Maximum table load (uniform): 1200 kg Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 7100 kg

Inv. Num. : 9047 Type: VF 0 Producer: HAAS Created: 2001 Parameters: Work table length: 660 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Maximum vertical spindle speed: 7500 1/min X-axis travel: 508 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3630 kg

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: CELOS X with HEIDENHAIN TNC7 Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools60 Working area 1Longitudinal450 mmCross580 mmVertical460 mmSpecial equipmentFischer spindle 40,000 rpm with wave cooling 5-axis design Tool magazine 60 places HSK-E50 Production package high chip volume with IKZ (chip conveyor, rinsing gun, rotating viewing panel, AR flushing, IKZ 40 bar/600 1) Oil Mist Separator AFS BlowinSpecial equipmentPreparation aut ...

Model: Mori Seiki MV-653/50 (Year 2000) Travels (X/Y/Z): 1530 x 660 x 650 mm (60" x 26" x 25.6") Table Size: 1700 x 660 mm (67" x 26") Spindle Taper: CAT 50 / BT 50 Spindle Speed: 6,000 RPM (High Torque) Motor Power: 22 kW (30 HP) ATC Capacity: 30 Stations Machine Weight: 16,000 kg (35,270 lbs) Find more here - / Contact us at -

Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. The X-axis of the machine makes running noises. Documentation available. On-site inspection is possible.

Offered is a CNC vertical turning machine - pick-up system. Chuck diameter: approx. 160mm - 200mm, swing diameter: approx. 270mm, travels X/Z: approx. 500 - 600mm/approx. 160 - 200mm, max. spindle speed: 6000rpm, tool carrier: 12-station turret, drive system: Siemens SIMODRIVE 611, hydraulic unit: available, coolant system: including pumps and filter (One Eye Ind. magnetic filter installed), hinged belt chip conveyor. Inspection is possible by appointment.

VERTICAL PLATE FREEZER, DYBVAD STÅL INDUSTRI, TYPE: V-4-16 Technical description: Refrigerant: R22 / R502 / R717 Temperature range: - 40 ° C / + 40 ° C Blocks number: 16 or 32 blocks Block size (16x): 820 mm x 76 mm x 800 mm Block size (32x): 390 mm x 76 mm x 800 mm Total dimensions: 2300 x 1400 x 1400 mm

Used stainless steel, vertical silo made by German company AZO, capacity: 12 tons (approx. 7.2 m³). The silo features a vibrating floor, a silo discharge valve, and a blow-off pipe. Used for storing PVC powder. 10 units available.

Key data: 600 mm, 500 mm, 500 mm

CNC 5-Axis Vertical Machining Center DMG Mori DMU 60 eVo Year of construction 2017 Heidenhain TNC 640 ERGOline 2-axis NC swivel rotary table Table size 600 × 500 mm Table load max. 400 kg Table NC Rotary Axis C-Axis 360° Table NC swivel axis B-axis -5° / +110° X 600 mm Y 500 mm Z 500 mm Spindle holder SK 40 BIG PLUS Spindle drive power 25 / 35 kW AC Spindle speeds up to 20,000 rpm. 120 tool magazine slots Operating hours 47,589 Spindle hours 28,638 Offer number MV-6512

Key data: 750 mm, 600 mm, 520 mm

CNC 5-Axis HSC Vertical Machining Center DMG DMU 70 eVo Linear NEW DESIGN Year of construction: 2011 Heidenhain iTNC 530 2-axis NC swivel rotary table Table size Ø 700 x 500 mm Table load max. 350 kg C-axis rotation 360° x 0.001° Swivel axis B-axis 120° x 0.001° X 750 mm Y 600 mm Z 520 mm Spindle drive motor 25/35 kW Spindle speeds max. 18,000 rpm. 60-fold tool magazine positions Tool holder HSK-A63 Electrified tour of the factory Offer number MV-6513

Key data: 1 mm, 1 mm, 700 mm

5-Axis CNC Vertical Machining Center Mikron HPM 1150U Year of construction 2013 Heidenhain iTNC 530 NC Rotary Table Table Ø 1,000 mm Table load max. 1,100 kg Table rotation axis c-axis 360° / 0.001° NC swivel spindle Head swivel axis B-axis +16°/-120° / 0.001° X 1,000 mm Y 1,150 mm Z 700 mm Spindle speeds up to 24000 rpm. 238 tool magazine slots Two identical machines (MV-6519/MV-6520) available. The machines come from a former aerospace facility and are in good condition. They ran for about 8 years in continuous operation and 5 years sporadically. Offer number MV-6519 + MV-6520

Key data: 762 mm, 460 mm, 460 mm

5-Axis CNC Vertical Machining Center Okuma MU-400VA Year of construction 2009 OSP P200M CNC Control 2-axis NC swivel rotary table Table clamping - Ø 400 mm Table load max. 300 kg C-axis 360° A-axis +20°/-110° X 762 mm Y 460 mm Z 460 mm Spindle drive power 22 kW Spindle speeds max. 15,000 rpm. Tool holder HSK-A63 32 tool magazine slots Tool diameter max. 90 / 125 mm To be visited under power. Offer number MV-6440

Key data: 762 mm, 508 mm, 508 mm

5-Axis CNC Vertical Machining Center Haas UMC 750 Year of construction 2019 Haas CNC 2-axis NC swivel rotary table Table diameter Ø 500 mm Table load max. 300 kg. C-axis 360° B-axis +120°/-35° X 762 mm Y 508 mm Z 508 mm Spindle holder ISO 40 Spindle drive power 22.4 kW Spindle speed max. 12,000 rpm Tool holder ISO 40 31 tool magazine positions Offer number MV-6495

Key data: 850 mm, 700 mm, 500 mm

5-Axis CNC Vertical Machining Center Hermle C40U Dynamic Year of manufacture 2007 Siemens 840D 2-axis NC swivel rotary table Table Ø 420 mm X 850 mm Y 700 mm Z 500 mm Spindle speed max. 18,000 rpm. Tool holder HSK 63 38-speed tool changer Offer number MV-6500

Key data: 500 mm, 1 mm, 500 mm

5-Axis CNC Vertical Machining Center with Pallet Pool Makino D500 Year of construction: 2011 Fanuc 310iS Professional 5 2-axis NC rotary and swivel table Erowa pallet handling system with 4 pallets Table size 400 x 400 mm C-axis 360° A-axis +30° ~ -120° X 500 mm Y 1,000 mm Z 500 mm Spindle speeds 300 – 3,000 rpm. 60-cavity tool magazine Offer number MV-6494

Hartford F1 Series LG-1000 CNC Vertical Machining Centre Type: CNC vertical machining centre Manufacturer: Hartford Model: F1 Series LG-1000 Year of manufacture: 2008 X-axis travel: 1000 mm Y-axis travel: 510 mm Z-axis travel: 630 mm Speed range: up to 10,000 rpm Workpiece weight max.: 700 kg Motor power: 11 kW Approx. machine weight: 7000 kg Approx. machine dimensions (L x W x H): 2850 x 2250 x 2750 mm Table surface: 1150 x 510 mm Fast crossing: 30/30/24 mm/min Additional information: For transportation dimensions are mm 2850 x 2250 x 2750 + 3 pallets Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-4

Bridgeport INT 412X CNC Vertical Machining Centre Type: CNC vertical machining centre Manufacturer: Bridgeport Model: INT 412X Year of manufacture: 1991 Serial number: 76159 Taper: ISO 40 X-axis travel: 450 mm Y-axis travel: 310 mm Z-axis travel: 300 mm Speed range: 4,000 - 6,000 rpm Workpiece weight max.: 250 kg T-slot fixture table size: 840 x 320 mm Motor power: 5.5 kW Approx. machine dimensions (L x W x H): 1,900 x 2,100 x 2,300 mm Approx. machine weight: 2,200 kg Automatic Tool Changer (ATC), typically 12 tools. Max. tool diameter approx. 75 mm. Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-1

Key data: 1000 mm, 600 mm, 660 mm

Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1000mm Axis Y ... 600mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling ... 20bar, Grundfos ISO 40 Max. table load ... 700 kg L x W x H ... 3000 x 2700 x 2940mmmm Machine weight... 5500kg Magazine spaces ... 24 Handwheel Heidenhain HR510FS Workpiece Probe Heidenhain TS460 Rinsing gun 10bar The machine has undergone a complete overhaul. More info on request. The machine is ready for the viewings.

Key data: 1000 mm, 1100 mm, 750 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1150x900mm Axis X ... 1000mm Axis Y ... 1100mm Axis Z ... 750mm Spindle speed ... 10-18000 rpm controlled axes ... 5 IKZ ... 80bar HSK-A 63 Max. workpiece weight ... 2000kg Magazine spaces ... 60 Machine weight ... 12500kg Total power requirement... 71kVA The machine is in good condition, possible to test under power.

Key data: 750 mm, 400 mm, 500 mm

Inv. Num. : 8792 Type: Mikron VCE 750 Producer: HAAS Created: 1997 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 350 mm Maximum vertical spindle speed: 7500 1/min X-axis travel: 750 mm Y-axis travel: 400 mm Travel Z axis: 500 mm Cone: SK 40 Number of all tools: 20 pieces Equipment: 4. Axis 2023: Replacement of the manual gearbox of the tool changer Replacement of the tool plate magazine

A deposit of €5500.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Fast feed speed 42 m/min Cutting speed 1-8000 mm/min 30-position tool changer Max tool diameter 80-125 mm Max tool weight 8 kg X-axis positioning accuracy 0.015 mm Positioning accuracy Y/Z axes 0.010 mm X-axis repeatability 0.006 mm Y/Z axis repeatability 0.004 mm Tables, utensils and accessories included WARNING! FOR TRANSPORT, EXCEPTIONAL TRANSPORT WITHIN 3 METERS IN WIDTH IS REQUIRED Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-11

OHAUS Achiever 5000 Vertical Rod Stirrer For laboratories Model: ACHIEVER 5000-60 (E-A51ST060) Speed: 30 to 2,000 rpm Capacity: 40 L Display: LED Voltage: 115/230 VAC Power: 190 W Shaft Diameter (Metric): Up to 8.5 mm Dimensions (L x W x H): 235 x 90 x 285 mm Delivered without rod In excellent aesthetic and working condition

hogedrukkoeling via de spindel spanentransporteur X-axis: 1660 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 2000 x 510 mm Max weight on the table: 1000 kg Admission in spindle (ISO): BT-40 Power on the spindle: 18,5 kW Control : Mazatrol 640M Toolchanger: yes Number of toolholders: 30 positions Number of rotations: 12 000 rpm Weight: 8250 kg

Connected load: 16kVA, control: FANUC Series 0-M, with carousel tool magazine, coolant system with external chiller HABOR Unit, spindle cooling, enclosed working area (full enclosure), handwheel (MPG) vorhanden, manual clamping devices on table and transformer separately in the control cabinet. On-site inspection is possible.

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc 31iMB in standard version, including the following special equipment of the machine: control system dialogue in Czech language Automatic tool change – 24 pcs Z-axis travel – 1500 mm with raised stand Chip conveyor Workpiece probe OMP-60 Tool probe TS-27R Spindle power 22/26 KW Horizontal spindle speed 5000 rpm. Manual rotating head, speed 3500 rpm. Spindle center cooling Tool magazine can be tilted out of the table space – next to the stand on the left