vertical lathe used for sale

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Key data: 230 mm, 460 mm, 25 U/min

Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...

Year of manufacture 1980s/90s Technical data: Tip height: 185 mm Center width: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock mount: MK 3 Quill stroke: 110 mm Dimensions (WxDxH), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw lathe chuck, brand: Röhm, ø 200 mm - Quick-change holder with 4 inserts - Bed stop - Chip tray

Leit & Tension Spindle Lathe WEILER COMMODOR 180 GSD / New -Unused -Exhibition machine / zero operating hours -CE marking -3 - Axis Digital Display -Tip width 1000mm -Tip height 180mm -Spindle passage 56mm -Circumferential diameter over bed 380mm -Circumferential diameter via face slide 215mm -Speed range / gearbox 25-2000 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric/Diametrical -Tailstock / quill cone MK 4 -Quill stroke 150mm -Coolant device -Multifix with insert -Three-jaw chuck 200mm -Work light -Swarf back wall -Documentation Dimensions: LxWxH 2.6x1.6x1.7 meters / Weight 2000Kg

Key data: 170 mm, 350 mm, 3250 U/min

Lead and pull spindle lathe Colchester Master VS 3250 Tip height 170mm Center width max 750mm Circulation over bed max 350mm Circulation via cross slide 196mm Spindle bore 42mm Spindle D1-4" Spindle speeds from 0 - 3250 by means of VFD and 3 gear stages Tailstock MT4 Incl.: Digital display on 3 axes Elesta Quick-change steel holder Multifix with 7 tool holders 2pcs 3-jaw chuck 160 and 250mm with 3 set of jaws Collet holder with lever with 23 collets 173E Kornerspitse Drill chuck Coolant Pump Tool cabinet with tools and manuals Cleaned and maintained

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 57.3 -Turning diameter: 400 - 1600 mm -Travel: X 180 mm / Z 60 mm -Drive motor: 1.1 kW -Accessories: incl.transport and assembly frame, individual components see photos -Dimensions: 1930/1280/H1000 mm -Weight: 730 kg

Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm -Weight: 224 kg

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis LxWxH 2.4x1x1.7 meters / Weight 1600Kg

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

Lead & Pull Spindle Lathe / WEILER COMMODOR 230 AC -CE marking -Year of construction 2002 -Tip height 230mm -Circumferential diameter over bed 475mm -Circumferential diameter over face slide 270mm -Tip width 1000mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal/plane feeds -Tapping/Metric/Inch/Module etc. -Spindle head Din 55027 / size 6 -Tailstock MK 4 -Drive power 11KW -Electric lining protection -Multifix base holder with inserts -Three-jaw chuck -Swarf back wall with work light -2x Emergency / Off -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2.6x1.1x1.6 meters / Weight 1900Kg

For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev  ...

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

Guide & Tension Spindle Lathe GEMA LZ 200 -Three - Axis Digital Display "NEW" -Guided tours " VERY GOOD" -Tip height 200 mm -Center width 1000 mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Spindle passage 54 mm -Automatic longitudinal/plane feeds -Speed range 36-2200 rpm -Tailstock MK 4- Adjustment 200mm -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2x1.2x1.6 meters / Weight 1800Kg

Lead & Pull Spindle Lathe NARDINI MS 125 E -Peak height above bed 150mm -Turning diameter over support 140mm -Tip width 500mm -Spindle speeds 50-2500 rpm -Spindle passage 34mm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK3 -Collet quick-clamping device with various collets 173E -Tool cabinet with machine-related accessories -Swarf back wall -Documentation Dimensions: LxWxH 1.6xx0.7x1.6 meters / Weight 1200Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

Weiler Commodor B incl. 3 - axis digital display - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection - 2x Emergency / Off - Swarf back wall - Coolant device - Work light - Multifix with inserts - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Large assortment of lathe tool holders and tool blocks, including multiple identical units. Mixed brands including Sandvik Coromant and Kennametal. Auction-ID: A7-46756-221

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

\" Face plate lathe WMW / Zerbst DP1000 – Ø 1000 mm – with digital display Face plate lathe from GDR production (WMW / Zerbst) in robust industrial design. The machine is specially designed for the machining of large and heavy workpieces and is equipped with a face plate including clamping claws. Equipment: • Solid face plate with clamping claws • Mechanical feeds X/Y • Digital display (Sony) • Control panel with feed and rotation direction control • Protective housing / grille available • Coolant connection Condition: • Used, during operation • Manufacturer: WMW (VEB Werkzeugmaschinenkombinat \"7. Oktober\" Berlin / Zerbst) • Type: DP1000 (DP1000–DP1250 series ) • Face plate diameter: approx. 1000 mm • Total weight: approx. 6,000 kg • Year of construction: ambiguous, GDR production • Voltage: 380 V • Control: conventional • Connected load: 21 kW \ ...

\" Face lathe WEMA Zerbst DP2 – Ø 1,250 mm – 2 supports – with 3-jaw chuck Face lathe WEMA Zerbst, type DP2, in heavy industrial design. The machine is equipped with a face plate Ø 1,250 mm and has 2 supports, which also allows parallel machining. A 3-jaw chuck is installed, and interchangeable jaws are also available. Condition: • Used • Ready to demonstrate • Age-related signs of wear Scope of delivery: • Machine complete • Control cabinet • Circuit diagrams • Interchangeable jaws • Manufacturer: WEMA Zerbst • Type: DP2 • Year of construction: 1980 • Face plate: Ø 1,250 mm • Voltage: 380 V • Control: conventional • Feed + rapid traverse available • Documentation: Electrical circuit diagrams available • 2 supports • 3-jaw chuck mounted • Interchangeable jaws • Heavy face disc plate • 2 control panels / control areas • Control cabine ...

Year of manufacture: 2012 | According to the manufacturer, the ELITE 112 series is designed for machining thin bars and, depending on the version, covers a range from 0.8 to 12.7 mm. | The machine can be viewed by appointment. | We reserve the right to make changes and corrections to the technical data and specifications, and to sell the item in the meantime!

" Face lathe WEMA Zerbst DP2 – Ø 1,250 mm – 2 supports – with 3-jaw chuck Face lathe WEMA Zerbst, type DP2, in heavy industrial design. The machine is equipped with a face plate Ø 1,250 mm and has 2 supports, which also allows parallel machining. A 3-jaw chuck is installed, and interchangeable jaws are also available. Condition: • Used • Ready to demonstrate • Age-related signs of wear Scope of delivery: • Machine complete • Control cabinet • Circuit diagrams • Interchangeable jaws • Manufacturer: WEMA Zerbst • Type: DP2 • Year of construction: 1980 • Face plate: Ø 1,250 mm • Voltage: 380 V • Control: conventional • Feed + rapid traverse available • Documentation: Electrical circuit diagrams available • 2 supports • 3-jaw chuck mounted • Interchangeable jaws • Heavy face disc plate • 2 control panels / control areas • Control cabinet ...

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

Pressing force: approx. 8 tons Connection value: 230 V 1.5 kW Filling shaft: 630x460x750 mm Bale size: 630x460x700 mm Bale weight: approx. 30 - 80 kg Machine size 830x970x1870 mm WxDxH Machine weight: 360 kg Warranty: 12 months Condition: technically and optically revised Completely overhauled with new paint!

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500

Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time

Table clamping surface: 2 x 350 x 300 mm traverse path x/y/z: 700/300/250 mm spindle retainer: BT 30 ISA kl. / gr. Table/spindle distance: 450 mm spindle speeds: 6-6000 rpm number of tool stations: 10 pieces feeds: 5-10000 mm / min rapid traverse: x & y/z 25/20 m / min spindle drive: 3,1/4,1 kW Electr. Supply: 400 V kW weight: 2600 kg

Campagnolo Packaging Systems Vertical form and seal machine Model: C25 Serial:A02-02

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm

I am offering them a complete vertical packaging plant. Multihead weigher by Ishida Vertical flow of Hassia Redatron and Bosch Bosch cartoning machine If you are interested, please contact me.

Vertical pallet transport

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

Grenzebach HGB new device, 1a State ca 300 BH Uea dimensions: 590h x 170 x 190 d cm Weight ca. 1.8 t 78 cm with toothed belt conveyor Rail length 500 cm from the ground 26 cm

Tractive effort: to 25 Length: 2000 mm Room set: 3 piece

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...

P57 - used appr. 3 m³ / 3,000 litres polyester tank / GRP tank, Staffelstein tank, aboveground, vertically standing, good condition. capacity: appr. 3 m³ / 3,000 litres material: polyester / GRP height: 2.40 m width: 1.04 m length: approximately 1.60 m (with lid 1.80 m) Aboveground, vertically standing tank, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as rain collection tank etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write ...

P63 - used appr.4 m³ / 4,000 litres polyester tank / GRP tank, aboveground, standing vertically, in good condition. volume: appr. 4 m³ / 4,000 litres material: polyester / GRP height: appr. 2, 30 m (tank) / 2, 60 m (total) width: appr. 1, 35 m length: appr. 1, 86 m Aboveground, vertically standing tank on a steel frame. Dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL / ASL, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give  ...

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)

Vertical band aege KOeLLE ST105, table 950/900 mm, v= 15 - 2300 m/min - table must be overhauled - see pictures

Qty. 1 Second-hand vertical profile painting cabine The equipment is designed for automatic electrostatic spraying of powder paints and varnishes onto long metal products and must be built into a production line equipped with an overhead single-rail closed ring conveyor. Mfc.: TRASMETAL Built: Main technical characteristics Maximum profile size: Width: 120 mm Height: 8,000 mm Length (axial along the conveyor): 350 mm Equipment exhaust ventilation: 24,000 m3/hour Compressed, dried and purified air (water - maximum 1 g / m3, oil - maximum 0.01 ppm / m3) Total flow: 530 m3/hour Pressure: 7 bar Electricity: 380 V, 50 Hz, 3 ph. Power: 235 kW

VERTICAL PANEL SAW type HOLZHER 1255 second hand machine volt. 380/50 max. working length mm.5300 max. working heigth mm.2200 CE mark : Yes

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...

A vertical pillow-pack packaging machine enables a very flexible manufacturing of packaging. Different bag types you can with short set-up and make-ready times through different options with different bag widths and lengths produce. The bag can be made with printed and transparent foil. FEATURE -Modern pillow-pack machine in the optimal price-performance ratio. Stainless steel with safety plexiglass Color touch-display with intuitive operating software -Fast, tool-free bag size change -Simple, intuitive operation -low maintenance APPLICATIONS Gusset bags, sealing bags, pillow bags Granules, food & non-foods, such as chips, rice, coffee, sweets, powders (flour, food supplements, etc.), TK goods, pet food, and much more. TECHNICAL data sample for the VSBM01 Film width: 220-520mm sealing width: 5-10 mm front surface width: 60-190mm Side Surface Width: 40-110mm maximum m ...