vertical lathe machine used for sale

ID3354 Unimog - 4x4 year/Baujahr 1982 Unimog 4x4, Nordmeyer DSB 1 3/5 (combination drilling rig for dry and mud drilling), with piston pump with approx. 200 litres per minute for core drilling, with centrifugal pump for well drilling (supplied loose), two-stage power rotary head (450 daN - 175 revolutions/ 225daN - 350 revolutions), drilling diameter dry drilling max. 324mm, flush drilling max. 600mm in air-lift or suction flush drilling (additional equipment: drilling diameters up to 290mm are possible in rotary drilling), without casing machine Unimog 4x4, Nordmeyer DSB 1 3/5 (combination drilling rig for dry and flush drilling), with piston pump with approx. 200 l per minute for core drilling, with centrifugal pump for well drilling (loosely enclosed), power rotary head two-stage (450 daN - 175 revolutions/ 225daN - 350 revolutions), drilling diameter dry drilling max. 324mm, fl ...

Control SIEMENS Sinumerik 840D Specifications: Workspace - Max. rotation and turning diameter 2,000 mm - Max. turning height 2,000 mm - Face plate diameter 1,600 mm - Max. face plate load 11,200 kg - Chisel slide travel (vertical) 1,400 mm Smallest plunger diameter 330 mm Plunger cross-section 250 x 210 mm - Drive power of the main motor 71 kW - Crossbar adjustment 1,170 mm - Crossbeam support of central face plate to the right 1,170 mm - From the middle of the face plate to the left 25 mm Speed of faceplate: - Number of transmission stages 2 - 1 level 3.15-80 min-1 - 2 Level 12.5-315 min-1 - Lifter and support hydrostatically guided Feeds - X and Z 0.1 2000 mm/min - Rapid traverse X and Z 6,000 mm/min - Weight approx. 24,000 kg - Voltage 400 V 50 Hz - Connected load 175 kW - Space requirement L = 10,000 mm B = ...

ID3420 Geotec Rotomax XL GTCi year/Baujahr 2012 approx. 10,000 hours/hours 15 t Crawler drilling rig, Flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective piping (178 mm) Crawler drilling rig, flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective casing (178 mm)

Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,500 mm Circumferential diameter (max.) 4,000 mm Workpiece height (max.) 3,000 mm Total height of the machine 7,250 mm Maximum workpiece weight 50,000 kg Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam 1,500 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Stations Crossbeam Support (Left) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Changer Main Drive: Main motor power 100 kW Face plate speed range 1-100 rpm. Maximum torque at the face plate 100  ...

A vertical pillow-pack packaging machine enables a very flexible manufacturing of packaging. Different bag types you can with short set-up and make-ready times through different options with different bag widths and lengths produce. The bag can be made with printed and transparent foil. FEATURE -Modern pillow-pack machine in the optimal price-performance ratio. Stainless steel with safety plexiglass Color touch-display with intuitive operating software -Fast, tool-free bag size change -Simple, intuitive operation -low maintenance APPLICATIONS Gusset bags, sealing bags, pillow bags Granules, food & non-foods, such as chips, rice, coffee, sweets, powders (flour, food supplements, etc.), TK goods, pet food, and much more. TECHNICAL data sample for the VSBM01 Film width: 220-520mm sealing width: 5-10 mm front surface width: 60-190mm Side Surface Width: 40-110mm maximum m ...

CNC vertical jig boring machine WMW MIKROMAT Type BKoZ 900x1400/5NC Travel X 1120 mm Travel Y 710 mm Spindle travel Z 315 mm Travel W 630 mm Numerical Command CNC NUM 1060 Spindle Ø 125 mm Cone SA40 Rotation from 36 to 2240 RPM Table size 1400 x 900 mm Distance between colums 1080 mm Maxi distance spindle nose/table from 0 to 900 mm max Maxi eligible load on table 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage 380 V Dimensions (L x W x H) 4000 x 2460 x 3030 mm Weight approx. 9 T MACHINE IN OUR STOCK IN FRANCE.

Nr. 02 VERTICAL LATHES FAMAR MODEL: ERGO 230 SERIAL NUMBER: FAMAR NR. 20.09/1-20.09/2 SWITCHABLE Ø: 250 MM SWITCHABLE HEIGHT: 125 MM Ø SELF-CENTERING: 250 MM SPINDLE ATTACHMENT: 6 ASA ROTATIONAL SPEED: 6000 RPM TOOLHOLDER STATIONS: NR. 12 MOTORABLE: NR. 12. CONTROL: SIEMENS 810

VERTICAL LATHE FAMAR MODEL: ERGO 210 YEAR: 1995 SERIAL NUMBER: FAMAR NR. 95/12 MAX MACHINABLE DIAMETER 200 MM LENGTH OF WORKPIECE MAX MACHINABLE 150 MM X-AXIS STROKE: 340 MM Z-AXIS STROKE: 215 MM FAST AT 60 M/MIN ASA CHUCK NOSE 6 " SPEED: 6000 RPM

MIKROMAT Model / type:BKoE 630x1000 Technical data: > Mikromat BKoE 630 x 1000 > table clamping surface 1000 x 630 mm > longitudinal travel of the table 710 mm > cross travel of the table 700 mm > travel of headstock 630 mm > spindle stroke 200 mm > distance between spindle nose and table 20-850 mm

BKOZ 900x1400 spindle taper MK IV sleeve stroke 250mm table size 900x1400mm longitudinal 1000mm cross 750mm vertical movement by the head of main spindle 600mm spindle speeds 28-1400 Upm spindle feeds 0,02-0,8mm/U scales wreaths for all directions of motion hydr. clamping system coolant system sep. control cabinet Motor: 230/380V 50HZ 8KW dimensions base: 3.300 x 2.400mm height: 2.500mm weight: 7.500 kg

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours ...

REALMECA MINI C3X-CNC VERTICAL 1 phase machining milling machine Used for teaching begginers. Perfect condition

specifications: - Roll diameter 420 mm - Projection 410 mm - maximum passage height 265 mm - Table size 600 x 600 mm - Table li. + re. swivel each 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 3150 - 3260 mm - Sawing bandwidth 3 - 16 mm - 8 Cutting speeds approx. 18 - 562 m/min - Drive 400 V / 1.1 / 1.7 kW - Weight approx. 650 kg - Space required approx. W 900 x H 1900 x D 1000 mm - E. foot button

Spindle diameter 3,000 mm Turnerable diameter 3,200 mm Maximum workable height 2,000 mm Weight allowed over spindle 40 ton Pump engine power 63 kW Spindle rotation speed 0.66-62 RPM Machine weight 86,000 kg Dimensions 9.345x5.120x6.030 mm

Platform diameter 2,800 mm Max turnerable diameter 3,200 mm Maximum height of the workpiece 1,600 mm Weight allowed above platform 16,000 kg Main engine power platform 55 kW Spindle RPM 1.25-63 Spindle No. Crossbar stroke 1,240 mm Horizontal head stroke 1,720 mm Vertical head stroke 1,200 mm Total machine weight 43 ton

Ø max. of the piece: 2200 mm Ø clamping of the table: 2000 mm Maximum load on the table: 12000 kg Maximum height of the piece: 1200 mm RAM Stroke (Z): 720 mm Main engine power: 55 kW

platform diameter: 1450 mm (HYDRAULIC - hydraulic spindle) maximum diameter of the piece: 1650 mm maximum height of the piece under the crossbar: 1200 mm - under tool holder: 1000 mm maximum workpiece weight: 11000 Kg mobile crossbar running on the plinth: 900 mm fast movement speed: 400 mm/min. slow displacement speed: 100 mm/min positioning accuracy on the base: +/- 0.1/100 mm main drive engine power: 60 KW platform advancement range: 2-280 rot/min number steps speed change box 3 work support stroke (X-axis): 1542 mm vertical stroke work support sled (Z-axis): 1200 mm sled section: 250x250 mm Milling shaft cone: ISO 50 milling engine power: 22 KW milling shaft speed range: 20-2000 rot/min X-Z axis work feed range: 1-4000 rot/min fast forward: 6000 rot/min C axis feed (slow-regimo milling rotation): 1-360 °/min X, Z, C: 45 N ...

Table diameter: 1,200 mm Maximum turnerable diameter: 1,350 mm Spindle power: 47.7 Kw Maximum turnable height: 950 mm Table capacity: 6 ton Table rotation speed: 2.22 ÷ 200 rpm Vertical RAM wagon stroke: 1,000 mm Vertical turret wagon stroke: 760 mm Tilt vertical wagons: 35 ° Total weight: 16 ton CNC FAGOR 8055 Year 1979 REVISED IN 2009

Table diameter 1450mm Maximum working diameter 1600mm Maximum height under the crossbar 1000mm Two balanced RAM Quota viewers Machine working in good condition Machine weight 18 ton This morando vertical lathe is in excellent condition and ready to be installed.

Spindle diameter 2,000 mm Turnerable diameter 2,000 mm MACHINE IN MECHANICAL/ELECTRIC RETROFIT PHASE

CN FAGOR 8055-T Machine equipped with quota viewers, turret 2nd pentagonal wagon Spindle diameter 2,000 mm Maximum turntable height 1,310 mm RAM stroke 1,000 mm Maximum diameter 2,200 mm Spindle Max Speed 150 rpm Nr. 3 wagons type 1 RAM 1 turret 1 side Main engine power 52 kW

Maximum turnerable diameter 1200 mm Maximum permissible diameter 1250 mm Spindle engine power (S1/S6) 55 / 66 Kw Spindle maximum laps 1200 rpm ASA 15" Spindle Attachment Fast speeds 12 m/min X-axis stroke 750 mm Z-axis stroke 750 mm Rated engine torque 20 (X)-20 (Z) Nm Peak engine torque 80(X)-80(Z) Nm Nominal thrust force 1200(X) -120 (Z) N Screw pitch 10 (X) -10 (Z) mm Tools 24 Crown HIRT tool attachment Maximum weight per cell 15 kg Tool change cycle time 10 seconds Maximum weight on tool change ~ 250 Average tool weight ~ 10 Maximum milling tool diameter 150 mm Maximum tool length 350 mm Siemens Sinumerik Control

Ø plateau: 1250 mm Top speed: 500 rpm - 2 ranges Ø false plateau: 1450 mm Maximum piece: 1550 mm Maximum height of the piece: 1200 mm RAM stroke: 800 mm Crossbar stroke: 850 mm Tool warehouse: 10 ATC CNC Siemens 810 D

Ø board: 1250 mm Maximum turnerable: 1500 mm Useful height: 1355 mm Vertical crossbar stroke: 800 mm Ram vertical stroke: 1000 mm Toolholder number: 15 Table pruned: 12000 kg CNC Tesla NS 642 C Fast: 8 m/min Power: 40 kW Weight: 27.2 ton

Ø board: 1,800 mm Maximum working ø: 2,000 mm Max. Turning height: 1,250 mm Max. weight on the table: 15 tons X-axis: 2700 mm Z-axis: 1200 mm Axis C 360 ° Table speed: 3 - 300 rpm Board engine: 60 kw RAM: 250 x 300 mm Work progress: 0 - 2000 mm/min. Nc: FANUC 15 T SERIES ATC: 50 ISO 50 tools Total weight: 58 ton

honing diameter: 5-10 mm stroke: 40 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 station rotary table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 125 mm stroke: 350 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two step expansion for pre and finish honing Air gauge measuring Fixture for honing a 4 cylinder block Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 350 mm z-travel: 140 mm table surface area: 700 x 300 mm spindle taper ISO: 40 spindle turning speed range: 100 - 4000 U/min distance spindle center to column: 395 mm distance spindle nose and table: min. 170 -max. 550 mm control: TNC 407 milling feeds: 3 + 2000 mm/min rapid traverse: 5000 mm/min spindle drive: 5,5 kW total power requirement: 9 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

brand: CKD BLANSKO Model: SKHK 50 plateau diameter: 4770 mm maximum diameter: 5200 mm ram stroke: 2000 mm maximum height: 3000 mm capacity: 50 ton. Plateau revolutions: 1 range: 0.4-12/ 2 range: 1.6-50

ID3809 Hut HBR202 year/Baujahr 1998 Drilling rig, diesel engine, KDK 3 SHG 1000 (3-speed), telescopic crawler chassis, machine fitted for HDI, additional accessories (additional flushing head (for HDI), standard drill head, approx. 20 m of drill pipe (1 m long)), optional HDI pressure measurement system (year of manufacture approx. 2022) available Drilling rig, diesel engine, KDK 3 SHG 1000 (3 gears), telescopic crawler chassis, machine mounted for HDI, additional accessories (additional flushing head (for HDI), standard drilling head, approx. 20 m drill pipe (1 m long)), optional pressure measurement system HDI (year of construction approx. 2022) available

ID3811 Klemm KR805-3GW year/Baujahr 2018 5.360 hours/hours Double-head drilling rig (drilling drive for outer casing KH 32G (outer casing 152.4 and 177.8 mm), drilling drive for inner drill string KH 22 (inner drill string D95)), with mounted Fassi F85BF.1.23.E crane; includes 80 units (2 m each) of outer drill string (D177.8 x 8.8 mm), 80 units (2 m each) of outer drill string (D152.4 x 8.8 mm), and 80 units (2 m each) of inner drill string (D95 x 8.8 mm), plus crossovers, spacer pieces, adapters, preventers, drill bits, etc. Double-head drilling rig (drill drive for outer pipe KH 32G (outer pipe 152.4 and 177.8 mm), drill drive for inner rod KH 22 (inner rod D95)), with mounted crane Fassi F85BF.1.23.E, incl. 80 pieces of 2 metres - outer rod D177.8 x 8.8 mm m, incl. 80 pieces of 2 metres - outer rod D152.4 x 8.8 mm, incl. 80 pieces of 2 metres - inner rod D 95 x 8.8 mm, plus the  ...

Ref.nr: 00911 Name of the system Vertical Inside Broaching Machine The electromechanically driven broaching machine is suitable for the precise and economical production of internal profiles, keyways and gears. Thanks to their robust construction, very smooth running and automated process sequences, it is ideally suited for use in series production. Manufacturer: Frömag Model Type FSR 6-800 MZB-PPC Year of construction 2008 Holder for three broaching needles Hub 800 mm aVersion: Vertical internal broaching machine Pulling force: 60 kN Connected load: 15 kW Control: FRÖMAG Commander PP-10 Broaching tools: 3 pieces Machine Dimensions (L x W x H): approx. 1,050 x 900 x 3,800 mm Condition Fully functional, currently dismantled, but if necessary this can also be demonstrated with the agreement of the seller Submission date Immediately

Vertical injection moulding machine manufactured in 1998. This Arburg 1200 TS 800-60-350 features a clamping force of 800 kN and includes two injection units: a vertical unit with a Ø22 mm screw and a horizontal unit with a Ø35 mm screw. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 1200 TS 800-60-350 machine we have for sale. Contact us for further details.

From the roll to the bag! Manufacture bags according to desired format and fill and seal with the product. Description - Optimal price-performance ratio - Easy operation and cleaning - Low maintenance - Stainless steel version (1.4301) with safety Plexiglas - Control is carried out by a PLC, color touch display with intuitive operating software - Fast, tool-free bag format change - One format included Specifications - Intermittent heat sealing for hot sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 180-520mm - Bag dimensions (LxW): 60-350mm x 70-250mm - Cycle rate: 15-50 bags /min. (depending on VE) - Electrical power: 3.5 KW / 220V / 50(60) Hz - Compressed air consumption: 700 l/min at 6 bar - Dimensions (LxWxH): 1540mm x 1160mm x 1600mm - Weight: 450kg

-Intermittent flow wrapping machine in stainless steel design. -Servo drive in the cross-sealing station for ideal and reproducible bag qualities. -Separately controlled drives for high flexibility with different packaging formats. -Year of construction: 2016 -Refurbished in 2022 -Condition: as good as new Specifications: -Package length: 80-550 mm (1000 mm with double extractor) -Package width: 80-350 mm -Film roll width: 730 mm maximum -Film roll diameter: 350 mm / 40 kg maximum -Roller core diameter: 60-80 mm -Film material: all common hot or cold sealable films and composite films -Production capacity cycles/min: 60 purely mechanical

A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.

FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...

Table clamping surface: 300 x 1100 mm Travel x: 780 mm Travel y: 250 mm Travel z: 410 mm Cbgaxkvf39 Spindle holder: SK 40 Pinole stroke: 100 mm Spindle speeds: 31.5 - 1400 rpm Feeds longitudinally and transversely: 12.5 - 630 mm/min Feeds vertical: 6.3 - 315 mm/min electr. Connection: 380 V, 5.5 kW Space requirement: 1770 x 1500 x 2050 mm Weight: approx. 2200 kg

Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.

Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details.

O-M LTD. CNC Vertical Boring Mill FANUC 16T-A CNC CONTROLS, RETROFIT 1994 CAPACITY: TABLE DIAMETER 4000mm MAXIMUM TURNING DIAMETER 7000mm MAXIMUM TURNING HEIGHT 2900mm MAXIMUN HEIGHT UNDER RAIL 3000mm TABLE WEIGHT CAPACITY 45400kg VERTICAL RAM TRAVEL, Z-AXIS 1500mm HORIZONTAL TRAVEL OF RAM, X-AXIS 2550mm TABLE SPEEDS RANGE .55-40 RPM TABLE SPEEDS 16 STEPS FEED RANGE VERTICAL RAM HEAD 0.003-.6 IPR RAPID TRAVERSE, HORIZONTAL HEAD 49 IPM RAPID TRAVERSE, CROSS RAIL 12 IPM RAPID TRAVERSE, COLUMN 21 IPM MAXIMUM TORQUE 58,000 LB/FT EQUIPPED WITH: FANUC 16T-A CNC CONTROLS (RETROFIT 1994) 4000mm T-SLOTTED TABLE WITH 4-TOP JAWS OPENSIDE ADJUSTABLE COLUMN VERTICAL OCTAGONAL RAM ON CROSS RAIL COOLANT CHIP GUARDS MAYFRAN CHIP CONVEYOR 50 HP MAIN MOTOR NOTE: MACHINE IS UNDER POWER FOR INSPECTION. WELL MAINTAINED MACHINE IN EXCELLENT CONDITION! RETROFIT WITH FANUC 16T-A CNC ...

This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year.

x-travel: 450 mm y-travel: 300 mm z-travel: 240 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Matheys Type: 2B Table length: 850 mm Table width: 235 mm X: 450 mm Y: 300 mm Z: 240 mm Maximum speed: 2.500 RPM Variable adjustable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Auction-ID: A1-41279-396

DIEDESHEIM vertical lathe Vertifront 120-12 CNC. Electrics and geometry overhauled in 2007 for approx. 290.000,00 €! Former machine of the company Hoesch Rothe Erde Lippstadt, permanently maintained and maintained. Equipped with two turret supports (5-fold), protective hoods against emulsion vapors, housing see pictures, CE compliant. Details: Type 120-12 CNC Machine number L738 Year of construction 1983 Refurbished 2007 Space requirement approx. 20 sqm Weight approx. 20 to Power consumption approx. 110 kW Headstock Main spindle bearingsØ axial 500 mm radial 240 mm Cross Slide Unit Vertical slide stroke 800 mm (Z-axis) Paddling slide stroke 1,000 mm (X-axis) Basic hydraulics complete, system RING 2x2 axis CNC path control SIEMENS Sinumerik 3 TT Optional accessory 6-fold face plate clamping ideal for thin-walled workpieces ...

Auction-ID: A1-49727-19

Auction-ID: A1-49727-18

General Description Vertical glass washing and drying machine manufactured by Triulzi S.r.l. . Designed for automatic washing and drying of flat glass prior to insulating glass production, tempering, lamination and other architectural glass processing. Suitable for continuous industrial operation. Technical Details Manufacturer: Triulzi S.r.l. Machine type: Vertical glass washing and drying machine Maximum glass height: 3,000 mm Vertical washing and drying configuration Roller conveyor transport system High-efficiency air-knife drying system Industrial electrical control panel with operator interface Suitable for float, coated, laminated and Low-E glass Condition Good used industrial condition. The stainless-steel structure appears complete with straight panels, intact roller conveyor system and access doors. The machine remains installed in an industrial production envi ...