130,209 used machines on RESALE, but how to find them? Machine Search
Automatic lathe Genini ROTOUR 100 CE Max working length 300 mm Max turning diameter round Ø 140 mm, square 100×100 mm 15hp spindle motor Shank Speed 2050-2800-4100-5600rpm 3HP Pump Motor 0.5hp grinder motor CE mark
Circumferential diameter over bed ... 840mm Turning length ... 2750mm Max.workpiece weight ... 6000kg Circumferential diameter via support ... 530mm Spindle bore... 82mm Spindle speed ... 7-900 rpm The machine is in good condition, possible to test under power.
Year of manufacture: 1994 / overhauled: 2025 Circumferential diameter over bed ... 630mm Turning length ... 2000mm Circumferential diameter via support ... 340mm Main engine power ... 7.5kW L x W x H ... 4000 x 1400 x 1520mm Machine weight ... 2960kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.
Year of manufacture: 1979 / overhauled: 2024 Circumferential diameter over bed ... 710mm Turning length... 2000mm Max. workpiece weight ... 850kg Circumferential diameter via support ... 420mm Spindle speed ... 10-1000 rpm Main engine power ... 7.5kW Machine weight ... 3000kg L x W x H ... 4000x1440x1560mm The machine is in very good condition - after the general overhaul. More info on request. Viewing is possible at our warehouse in Brno.
Year of manufacture: 1978 / overhauled: 2024 Circumferential diameter over bed... 710mm Max. workpiece length ... 4000mm Circumferential diameter via support ... 420mm Spindle speed ... 90-1000 rpm L x W x H ... 6000x1440x1560mm Machine weight ... 3500kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.
Key data: 840 mm, 3000 mm, 490 mm
Circumferential. over bed 840 mm, over cross slide 490 mm Center width 3000 mm Speed range 10-1250 rpm, spindle nose DIN 55022 Gr. 11 Spindle bore 105 mm Feeds 0.060 - 1.4 mm // 0.024 - 0.518 mm Thread metric 1 - 224 mm Drive power 18.5 kW Quill path / cone 220 mm / MK 6 incl. Hardened and ground bed guides, electromagnetic brake of the main spindle mechanically driven upper support, rapid traverse longitudinal/transverse Multifix steel holder, fixed bezel 2-axis digital display,
Key data: 330 mm, 850 mm, 190 mm
Circumferential diameter over bed / support 330 / 190 mm Center width 850 mm Bore 36 mm Speed range 60 - 2400 1/min Tailstock quill MK 3 / stroke 100 mm incl. accessories: 4-fold holder, chip back panel, T-slots in cross support Tightening tube for collets (New machine was designed according to DIN 8605)
Key data: 500 mm, 1000 mm
Circumferential diameter over bed 500 mm, over support 290 mm Center width 1000 mm Speed range 1-3000 1/min, spindle nose bayonet Gr 8 Spindle bore 70 mm Tailstock quill MK 5 / stroke 160 mm incl. Control MTC K, Face Plate Fixed bezel with rolling heads Steel holder head system Multifix C with 1 cassette Coolant Setup
Key data: 2020 mm, 1600 mm, 350000 mm
Stock number: 4023 LATHE Manufacturer: SKODA, Type: SUT 200 TD x 35000 Machines NO.: ob22780, Year of manufacture: 1984 Specifications: Turning length 35000 mm Turning over transverse slides 1600 mm Ø Gr. turning diameter 2020 mm Max. weight in quill 63000 Kg Spindle Motors Power 2 x 82 kW Total power 2x150 kw kW Accessories: Querschlitte 2 x ( Double ) Universal chuck 2 x 2000 mm mm Ø Rotating bezel 6 Fixed bezel 5 + 2 mm Ø Tailstock 2 x Machine needs be to rebuild - with new control Length: 45,200 mm, Height: 3000, Width: 3500 mm, Weight: 150,000 kg
turning diameter over bed: 630-640 mm turning diameter over slide rest: ca 380 mm turning length: ca 2000-4000 mm total power requirement: 15 kW weight of the machine ca.: 7-8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran spanentransportband De staafaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions
Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tooleye Mayfran spaanband De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions
Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran chiptransporteur De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions
Including various accessories; Quick-release system; Collets round ø3-ø42mm; Collets hexagon 14-32mm; Acurite digital readout; Refrigerant system; Heynau grinding/drilling unit (can be connected separately); Mechanical stop; Gears; Lighting; Occupational health and safety hood; Röhm three-jaw ø160mm; Various attacks; Tool holders; Auction-ID: A1-41995-12
Hyperturn 45 Year of manufacture: 2015 Operating hours: 36,315 h Belt filter system with immersion cooler 600 L / 40 bar Bar loader External turning holders: 6 pcs Drill bar holders: 6 pcs Driven angle heads: 5 pcs Radially driven: 3 pcs Parting tool holder: 1 pc Hainbuch HS/GS collet chucks Presetting device Find more here - / Contact us at -
Manufacturer: HK-CON Model: L2SDZ-6 SUS-090 Type of Machine : Lathe Find more here - / Contact us at -
used
Manufacturer:TRAUB Model: TNX 80/65 Year of Manufacture: 2008 Type of Machine : CNC Lathe Total Power Requirement: 95 kW Voltage: 400 V, 50 Hz Machine Weight: approx. 14,000 kg Machine Dimensions (L x W x H): approx. 5.5 m x 7.8 m x 2.52 m Floor Space Required: approx. 5.5 m x 7.8 m Spindle Specifications - Spindle head DIN 55026: HSP A8 / GSP A6 - Spindle bore diameter: 65 mm - Maximum spindle speed: 4,300 min-1 (HSP) / 5,000 min-1 (GSP) - Main spindle motor output: 25.2 / 30.2 kW - Counter spindle motor output: 17 / 21.5 kW Turret System - Turret positions: 4 turrets (positions 1, 2, 3 and 4) - Turret stroke X-axis: 170 mm - Turret stroke Y-axis: plus/minus 60 mm - Turret stroke Z-axis: 600 / 500 / 950 mm - Number of driven tools per turret: up to 10 - Vertical tool holders DIN 69880: 40 x 63 mm Linear Tool Carrier - B-axis: swivelling - Number of driven tools: 2x2 / 2x2( ...
used
Manufacturer: TRAUB Model: TNX 80/65 Year of Manufacture: 2005 Type of Machine : CNC Lathe Total Power Requirement: 95 kW Voltage: 400 V, 50 Hz Machine Weight: approx. 14,000 kg Machine Dimensions (L x W x H): approx. 5.5 m x 7.8 m x 2.52 m Floor Space Required: approx. 5.5 m x 7.8 m Spindle Specifications - Spindle head DIN 55026: HSP A8 / GSP A6 - Spindle bore diameter: 65 mm - Maximum spindle speed HSP: 5,000 min-1 - Maximum spindle speed GSP: 5,000 min-1 - Main spindle motor output: 25.2 / 30.2 kW - Counter spindle motor output: 17 / 21.5 kW Turret System - Turret positions: 4 turrets (positions 1, 2, 3 and 4) - Turret stroke X-axis: 170 mm - Turret stroke Y-axis: plus/minus 60 mm - Turret stroke Z-axis: 600 / 500 / 950 mm - Number of driven tools per turret: up to 10 - Vertical tool holders DIN 69880: 40 x 63 mm Linear Tool Carrier - B-axis: swivelling - Number of driv ...
used
Manufacturer: Gildemeister Model: GMX 400 linear Year of Manufacture: 2007 Total Power Requirement: 100 kVA Voltage: 400 V Machine Weight: 24,000 kg Floor Space Required: 60 m2 Working Range - Centre height: 1,343 mm - Maximum turning diameter: 640 mm - Maximum turning length: 1,930 mm - Maximum turning length over bed: 550 / 180 mm - Slide travel longitudinal X1, X2: 1,585 / 1,400 / 1,500 mm - Slide travel vertical Y: plus/minus 110 mm - B-axis: plus/minus 120 degrees - Maximum circumference: 640 mm - Length of workpiece in crown area: not specified - Maximum workpiece weight: not specified Spindle Specifications - Spindle head flat flange DIN: Flachflansch - Spindle nose diameter front bearing: 220h5 mm - Spindle bore diameter: 107 mm - Spindle nose diameter: 150 mm - Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper) - Spindle speed HSP: 3,200 / 4 ...
Turning length: 1000mm; Factory number: 37895; Turning diameter over bed: 500mm; Turning diameter over support: 280mm; Tip height: 250mm; Spindle Passage: 71mm; Speed range: 18-1800/36 step rpm ; equipped with digital display, Make: Fagor ; various accessories, Top grains, Turning steels etc. Auction-ID: A7-46619-270
Max. turning length: 760mm, Max. turning diameter: 405mm, Max. turning diameter over bed: 405mm, Diameter over slide: 216mm, Feeds in the x-z: 203/762mm, Spindle speed:800 rpm, Passage over the slide: 508mm, equipped with CNC control: Hass-control, incl. accessories on multifix holders, Turning steels and drill chucks; see photos for more details Auction-ID: A7-46619-340
Pallet with various accessories Collets Cheek chuck Auction-ID: A1-46607-117
Travels: X-axis: 210 mm Z-axis: 520 mm Auction-ID: A1-46607-52
Tip height: 165mm, Center width: 750-1000mm, Bore main spindle: 42mm, Spindle speed: 60-2000 rpm, Main motor power: 2.2kW, Machine number: 43503, equipped with digital display, Make: Acu-rite, Multifix holder, 3 jaw chucks, Assortment of clamping jaws, Drawer cabinet with assortment of turning steels, Sprial drills, Multifix holder etc. ; see photos for more details Auction-ID: A7-46619-330
Manufacturer: Schaublin Model: 180-CCN Year of Manufacture: 1997 Spindle Hours: 10,753 h Machining Capacities - Max. turning diameter over the bed (with revolver only): 330 mm - Max. turning diameter over the cross slide: 160 mm - Max. admissible diameter over the bed: 430 mm - Spindle centre height over cross slide: 83 mm - Max. distance between centres: 650 mm - Max. workpiece weight - with spindle A2-5: 25 kg - Max. workpiece weight - with spindle A2-6: 35 kg Spindle - Spindle nose ISO: A2-5 or A2-6 - Collet chuck compatibility (Schaublin): B45 / F48 (A2-5) | F66 (A2-6) - Max. bar diameter with B45 collet: 36 mm - Max. bar diameter with F48 collet: 42 mm - Max. bar diameter with F66 collet: 60 mm - Auto collet chuck through bore - A2-5: 170 mm | A2-6: 210 mm - Collet clamping force at 5 bar - A2-5: 2700 daN | A2-6: 3400 daN - AC motor drive: 15 / 18.5 kW (100% / 50% DE) - Motor ...
CNC Swiss lathe GILDEMEISTER SPRINT 20/8 linear With Fanuc 31i controller Year of Make: 2016 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range : max. 10000 rpm Stroke Z1: 80 mm SUB-SPINDLE Turning diameter: max. 20 mm Stroke Z 2 : 300 mm Speed: max. 10000 rpm SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 Pos. Tool Holder 12 x 12 5 rotating tools including spindles with clamp holder ESX 16 SLIDE 2 Stroke x 2 : 240 mm 4 position tool holder for external machining with connection 12 x 12 4 position tool holder for internal machining diameter 20 mm 5 rotating tools including spindles with clamp holder ESX 16 6 + 2 axes, 2 Y axes as standard Linear actuator for maximum precision With the following accessories: Full protection cab with interior lighting Various tool holders C axis for main and counter spindle Bar Feeder L ...
CNC Swiss lathe GILDEMEISTER SPRINT 20/8 With Fanuc 32i control Year of manufacture: 11/2019 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range : max. 10000 rpm Stroke Z1: 60 mm SUB-SPINDLE Turning diameter: max. 20 mm Stroke x 2 : 220 mm Stroke Z 2 : 170 mm Speed: max. 10000 rpm SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 325 mm SLIDE Y 2 Stroke Y 2 : 85 mm With the following accessories: Full protection cab with interior lighting Various tool holders Tool holder for slides 1-3 4 driven tools with 4 spindles with ESX/ER 16 holder C axis for main and counter spindle Y axis on carriage 1 – 2 2 cross slides Workpiece unloading conveyor Signal light 4 colour Fire extinguishing system Coolant device 165 l ( Pumping capacity 90 l/min 1 bar) THE MACHINE IS IN MINT CONDITION THE MACHINE HAS ONLY 110 PROGRAM RUNNING HOURS
Excellent condition - Fully operational - Loading / Transport possible! CNC automatic lathe GILDEMEISTER SPRINT 20 linear (2010) Connection hours 39836 h Cutting hours 10495 h Number of axes 8 Number of spindles 2 MAIN SPINDLE Bar diameter 20 mm Stroke 80 mm Spindle speed 10000 rpm Spindle power 3.7 kW C-axis indexing accuracy 0.001°. COUNTERSPINDLE Bar diameter 20 mm Stroke Z 300 mm Stroke X 240 mm Spindle speed 10000 rpm Spindle power 3.7 kW C-axis indexing accuracy 0.001° GUIDE BUSH SUPPORT Number of positions 11 Number of motorized positions 5 Tool speed 6000 rpm Stroke X 50 mm Beam Y 350 mm Automatic bar feeder IEMCA BOSS 332 E 32N (2010) Automatic translation
Machine dimensions: approx. 3,300 × 1,800 × 1,800 mm | FEDEK DH-65L bar feeder | Bar length: approx. 1,500 mm | Bar diameter: approx. 5–65 mm | Interface: bar feeder interface available | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale
used) | Very well maintained machine directly from the user | Machine has only run with oil | Operating hours around | FANUC 16i-T control with 9 axes | 9 axes (X / C1 / Y / E / B / A / X / C2) | Bar Ø max. 20 mm | Turning length max. 205 mm / 195mm | Main spindle, max. speed 10,000 rpm, C-axis | Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis | 4-fold tool holder | 3 cross drilling units | Turret with 8 stations | Various additional tool holders, quills | parts conveyor belt | Machine coolant: oil | Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm | The machine can be inspected by appointment. | Changes and errors in the technical data and information as well as prior sale reserved!
used) | Very well maintained machine directly from the user | Machine has only run with oil | Operating hours around 69500 | FANUC 16i-T control with 9 axes | 9 axes (X / C1 / Y / E / B / A / X / C2) | Bar Ø max. 20 mm | Turning length max. 205 mm / 195mm | Main spindle, max. speed 10,000 rpm, C-axis | Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis | 4-fold tool holder | 3 cross drilling units | Turret with 8 stations | Various additional tool holders, quills | parts conveyor belt | Machine coolant: oil | Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm | The machine can be inspected by appointment. | Changes and errors in the technical data and information as well as prior sale reserved!
Operating hours: 86760 | Technical data | - Number of axes: 5 | - Number of spindles: 2 | MAIN SPINDLE | - Max. bar diameter: 16 [mm] | - Z-axis travel: 140 [mm] | - Spindle speed: 8000 [rpm] | - Spindle drive power: 2.2 [kW] | - Number of tool positions: 13 | COUNTER SPINDLE | - Max. bar diameter: 10 [mm] | - Spindle speed: 8000 [rpm] | - Number of tool positions: 4 | FMB Turbo 3-26 bar loading magazine | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!
Year of manufacture: 2007 | Machine type: CNC Swiss-type sliding headstock lathe | Control: Fanuc, Series 18i-TB | Power-on hours: 20,279 h | Operating hours: 67,058 h | Technical Data | Machining capacity: | Max. turning diameter: Ø 20 mm (optional up to Ø 22 mm) | Max. turning length: 205 mm | Main spindle: | Speed: up to approx. 10,000–12,000 rpm | Power: approx. 3.7–5.5 kW | C-axis | Sub-spindle: | Speed: up to approx. 6,000–8,000 rpm | C-axis | Axes configuration: | X1 / Z1 / Y1 (main machining) | X2 / Z2 (sub-spindle) | Rapid traverse: approx. 24–30 m/min | Machine dimensions & weight | Dimensions (L × W × H): 2400 × 1205 × 1700 mm | Machine weight: approx. 2,200 kg | Subject to prior sale, changes and errors in technical data and specifications excepted.
used CNC sliding headstock lathe STAR SR20R, year 2005 | control, make Fanuc, series 18i-T, | 7 axes (X/Z/Y/C1/X1/Z1(C2), | bar-Ø max. 20 mm, | turning length max. 205 mm, | main spindle, speed max. 10.000 rpm, C-axis 0,001 degree, | counter spindle with collet, speed max. 8.000 rpm, C-axis, | tool holder for a total of 19 tools (linear tool holder, front attachment, rear machining), | parts conveyor belt, | standard guide bush unit | loading magazine IEMCA Boss 332E, year 2005 | Machine coolant: oil. | Extinguishing system Bosch | High pressure unit Büchel SF System SN 510020, 60 bar | The machine can be inspected under power by appointment. | Changes and errors in the technical data and information as well as | subject to prior sale!
Machine dimensions (LxWxH): 2540x1450x1850 [mm] | Machine weight : 1750 [kg] | Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] | Machine weight : 850 [kg] | The machine can be inspected by appointment. | Subject to changes and errors in the technical data and information as well as prior sale!
Used. Star SR - 32 | Year 1998 | Operating hours 60931 | Control: CNC Fanuc 18i Tb | Machining diameter: max. 32mm | Maximum workpiece length: 125 mm | Headstock travel: 310 mm | C-axis: 1° | Number of axes: 7 | Drilling capacity fixed tool diameter: 13 mm | Drilling capacity rotating tool diameter: 8 mm | Tapping: M12 (with driven tool M6) | Milling capacity: Ø 10 mm | Spindle speeds: 350 - 7000 (driven and smooth tools) | Coolant used in the machine: Oil | CE declaration of conformity | Operating and maintenance manual | Operating tools | According to the sender: Fanuc transverse drive system defective and was deactivated by Star Micronics. | Machine dimensions 1700x2512x1700 mm | Weight of the machine 2900 kg | Bar feeder FMB TURBO 5-42. | Bar capacity 5-42 mm attachment variant A | Hinged belt conveyor MAYFRAN | Small extinguishing system Kraft and Bauer and extinguishing agent con ...
Year of manufacture: 2004 | Technical data | Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) | Max. bar diameter: 12.7 mm | Max. turning length: 120 mm | Rapid traverse speeds: X-axis (linear): 40 m/min | Linear motor cooling: Separate cooling unit for thermal stabilisation of the linear drive. | Z-axis: 30 m/min | Main spindle speed range: 0 – 12,000 rpm | Drive power: 3.7 / 5.5 kW | C-axis: 0.001° resolution for high-precision milling operations | Counter-spindle speed range: 0 – 12,000 rpm | Travel range Z2: 150 mm | C-axis: Fully-fledged C-axis integrated | Tool carrier (linear slide system) | Total number of tools: up to 18 positions | Driven tools: 3 to 5 positions for cross-machining | Speed of driven tools: max. 6,000 rpm | Loading magazine: FMB Minimag for the diameter range of 2 to 23 mm. | Bar length: 3,020 mm | Chip conveyor | Small fire extinguishing system / Kraft ...
Year of manufacture: 2004 | Control system: Fanuc 16i-TB | Technical specifications | MAIN SPINDLE | - Max. bar diameter: 12 (15) [mm] | - Travel: 120 [mm] | - Spindle speed: 12,000 [rpm] | - Spindle drive power: 3.7 [kW] | - Torque: 6 Nm | COUNTER SPINDLE | - Max. bar diameter: 12 (15) [mm] | - Spindle speed: 12,000 [rpm] | - Spindle drive power: 3.7 [kW] | - Torque: 6 Nm | Powered tools: | Tool drive power: 1.1 kW | Max. speed: 6,000 rpm | Tools: | Number of tools: up to 20 (some of which are driven). | Driven tools: 4–6, for milling, drilling and threading operations. | Tool holder: ER collets or similar systems. | Rear machining: 4 stations | IEMCA Smart 316 / 32L bar feeder | Year of manufacture: 2006 | Bar diameter: 5–32 [mm] | Bar length: 3200 [mm] | Small fire extinguishing system / Kraft und Bauer fire extinguishing systems | Operating manual | Parts separator | Chip flushin ...
Machine dimensions 2400x1205x1700 mm | Machine weight 2200 kg | FMB IEMCA BOSS 332E loading magazine | Fire extinguishing system | The machine can be viewed by appointment. | We reserve the right to make changes to the technical data and specifications, and to sell the item in the meantime.
Year of manufacture: 12_2006 | Control system: Fanuc 18i-TB | Technical specifications | Max. turning diameter: Ø 20 mm (optional up to Ø 22 mm) | Turning length: 205 mm | Main spindle: | • Speed: up to approx. 10,000–12,000 rpm | • Power: approx. 3.7–5.5 kW | • C-axis for contour machining | Counter spindle: | • Speed: up to approx. 6,000–8,000 rpm | • C-axis | Axes (travel ranges): | • X1 / Z1 / Y1 (main machining): X1 approx. 265 mm / Z1 approx. 205 mm / Y1 ± 20 mm | • X2 / Z2 (counter spindle): similar to main axis, exact values depend on machine | • Rapid traverse: approx. 24–30 m/min | Machine dimensions: 2,400 × 1,205 × 1,700 mm | Machine weight: approx. 2,200 kg | Bar loading magazine: FMB TURBO 3-26/3200 | Chip conveyor | Viewing: The machine can be viewed on site by appointment. | Note: Subject to changes and errors in the technical data, and prior ...
Year of Manufacture: 2021 | Control: Fanuc 32i | Operational Status: Fully operational | Operating Hours: approx. 15.000 hours | Technical Data | Spindle Bore: Ø 27 mm | Spindle Nose: A2-5 | Chuck Capacity: max. 80 mm | Maximum Spindle Speed: 6,000 rpm | X-Axis Travel: 607 mm | Z-Axis Travel: 286 mm | Coolant System | Loading and Unloading System | Accessories / Tools / Manuals | Machine Dimensions and Weight | Machine Dimensions: approx. 1850 × 1750 × 1750 mm | Machine Weight: approx. 2100 kg | Loading/Unloading System Dimensions and Weight | Dimensions: approx. 1900 × 950 × 2000 mm | Weight: approx. 1000 kg | Coolant System Dimensions and Weight | Dimensions: approx. 1500 × 800 × 1100 mm | Weight: approx. 250 kg | The machine is fully operational and in good used condition. | For further information or to arrange a live demonstration under power, please feel free to contact us. ...
used CNC sliding headstock lathe STAR SR20R, year 2001 | control, make Fanuc, series 18i-T, | 7 axes (X/Z/Y/C1/X1/Z1(C2), | bar-Ø max. 20 mm, | turning length max. 205 mm, | main spindle, speed max. 10.000 rpm, C-axis 0,001 degree, | counter spindle with collet, speed max. 8.000 rpm, C-axis, | tool holder for a total of 19 tools (linear tool holder, front attachment, rear machining), | parts conveyor belt, | standard guide bush unit | loading magazine IEMCA G-226/32, year 2001 | Machine coolant: oil. | Extinguishing system Bosch | The machine can be inspected under power by appointment. | Changes and errors in the technical data and information as well as | subject to prior sale!
Year of manufacture: 1997 | Control system: similar to Fanuc | Technical specifications | Max. bar diameter: 36 mm | Standard bar capacity: 26 mm | Max. turning length: 100 mm | Swivel diameter over cross slide: 120 mm | Main spindle | Speed range: 100 – 6,300 rpm (continuously variable) | Spindle power: 7.5 kW / 11 kW (continuous/peak) | Spindle nose: A2-5 | C-axis: resolution 0.001° | Number of slides: 4 linear slides (X/Z) for simultaneous machining | 8-station star turret (VDI 20) | Rapid traverse speeds: 15 m/min (X-axis) / 20 m/min (Z-axis) | Feed force: 2,500 N | Single bar feed: ERGOMAT, for bar lengths up to 3,000 mm. | The machine can be viewed in operation by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!
Year of manufacture: 2005 | Machine type: CNC multi-slide automatic lathe | Control: CNC (Fanuc-based control) | Working range | Max. round bar capacity: 60 mm | Max. turning length: 100 mm | Spindle | Spindle power: 7.5 kW | Max. spindle speed: up to 3,150 rpm | Tool system | Servo-driven 6-station star turret | Turret change time: approx. 0.3–0.4 s | Multi-slide concept with: | Front horizontal slide (X1/Z1) | Rear horizontal slide (X2) | Two vertical slides (X3/X4) () | Travel distances | Horizontal slide travel distance: 45 mm | Vertical slide travel distance: 45 mm | Machine data | Machine weight: 2,000 kg | Equipment | Single bar feed | Multi-carriage turning system for high productivity | Coolant device | Chip disposal / chip tray | The machine can be viewed under power by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sal ...
Used Haas ST-20SS (Super Speed) CNC turning centre, built in 2010, | including LNS Super Hydrobar 6.50 HS 4.6, built in 2011. | Technical details: | 15-inch colour LCD monitor, user-friendly HAAS control | Max. turning diameter: up to 254 mm | Max. turning length: 533 mm. | Spindle: | Main spindle bearing defective! | Speed: max. 5,000 rpm. | Drive power: 22.4 kW (30 hp) high-performance vector drive. | Spindle nose: A2-6. | Spindle bore: 88.9 mm | Tool turret: | 24-station hybrid turret | Rapid traverse: | 24.0 m/min (X-axis) | 30.5 m/min (Z-axis). | Equipment: | automatic tool presetting system (Auto Probe Arm) | Unit for driven tools | LNS Super Hydrobar 6.50 HS 4.6 (built in 2011) | for bar diameters from approx. 5 mm to 50 mm (expandable to 65/68 mm within the HS series, depending on the model). | The machine can be viewed under power by appointment. | Subject to changes and errors ...
used: oil | Weight: 6.25 tonnes | Dimensions: (LxWxH) 3477x1860x1865 mm | The machine can be viewed under power by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!
used) | Very well maintained machine directly from the user | Machine has only run with oil | Operating hours around 78,000 hours | FANUC 16i-T control with 9 axes, | 9 axes (X / C1 / Y / E / B / A / X / C2), | Bar Ø max. 20 mm | Turning length max. 205 mm / 195mm, | Main spindle, max. speed 10,000 rpm, C-axis, | Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis, | 4-fold tool holder | 3 cross drilling units | Turret with 8 stations | Various additional tool holders, quills, | parts conveyor belt | Tank capacity 170L | Machine coolant: oil | Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm Year of construction 1999 | Fire extinguishing system Kraft & Bauer / GUT fire protection | Mayfran chip conveyor | The machine can be inspected by appointment. | Changes and errors in the technical data and information as well as prior sale reserved!
Operating hours: 47,000 | Technical data | - Number of axes: 5 | - Number of spindles: 2 | MAIN SPINDLE | - Max. bar diameter: 12 [mm] | - Z-axis travel: 140 [mm] | - Spindle speed: 8000 [rpm] | - Spindle drive power: 2.2 [kW] | - Number of tool positions: 13 | COUNTER SPINDLE | - Max. bar diameter: 10 [mm] | - Spindle speed: 8000 [rpm] | - Number of tool positions: 4 | FMB Minimag bar loading magazine | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, as well as prior sale!
maximum number of results exceeded
please refine your search
1.000 € 
