129,235 used machines on RESALE, but how to find them? Machine Search
Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...
Used production line for paints and varnishes from Diamac. The line includes: -2 x dissolver stationary 50hp, 1500 litres: diamac - industrial tyntometer: diamac (installation brand new, never used) - stationary mixer diamac 30hp inverter - stationary mixer slow speed diamac 10hp - column disolver diamac 15hp inverter - laboratory disolver diamac 2hp inverter - immea semi-automatic controller/ filler model dpc/5/30 - dust filter, pneumatic brand: wam - volumetric pumps for resin transport/dosing brand: pedrollo additional: - documentation, operating instructions, "ce" safety certificates, etc.
With Jagfeed and Jackpack 40-2 Delivery
Diana Jagenberg 115-3 year:1990 -straightline -lockbottom -4 corner -6 corner -vibrator -kicker -Counter -pre breaker without electronic gluesystem
TRM Electric Autoclave 1.5m diam. x 3.7m long Max. temperature 175deg C Quick Lock Door Max Work pressure 8 Bar Welded construction Complete with control panel Year 1990
LBBC Autoclave Internal dims: 1.8m diam. x 2.6m long Steam heated Max. working pressure 60psi Quick Lock Door Welded Construction Pressure Certificate Year 1999 External dims: 2.4m high x 3.6m long x 2.6m wide
LBBC Steam Autoclave 800mm diam. x 1.2m long Quick Lock Door Hydraulic Test Pressure 180psi Safe Working pressure 120psi Welded construction
control: Dialog 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Dialog 3 + 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Extrusion line for 3D monofilament composed of: - 1-spindle extruder, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With dryer hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretching: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large coil unwinder and double rewinder for small coils. - Dehumidifier Brand: Puchades, power: 6.7 KW (9.1 hp), 14 Amp, year: 2014.
grinding diameter: 660 mm grinding length: 2000 mm workpiece weight: 1500 kg grinding wheel diameter: 400 mm control: X-As. Diatos 602 total power requirement: 12/22/30 kW weight of the machine ca.: t dimensions of the machine ca.: m Including: With Diamant Wheel / Plunge Grinding With Spark out / Face Grinding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lid FP2A from vocational training center freshly serviced in top condition x-travel 300 mm y-travel 300 mm z-travel 400 mm Spindle holder ISO 40 Spindle speeds 40 - 3150 rpm Table size 620 x 390 mm Feeds infinitely variable 4 - 4000 mm/min CNC control Dialog4 (software update) Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Footprint 1.9 x 2.0 mm Control cabinet 1.90 x 0.75 x 1.05 m Dimensions approx. 2.9 x 2.7 x 2.0 m
Handwheel Dialog 4/11 - Contour3 Two available, one in very good condition, the second is new NOS!
Packer, Fabr. Joha, type: Diamant 2, 2-head, for 0.33 lt bottle and 0.5 lt bottle in box of 20, year 1995
Continuous mixer in stainless steel As good as new Motor drive 7.5 KW Capacity up to 15 t/h Fluid addition up to 3%
ID3502 OMAG Plant for large-diameter pipes / Großrohranlage OMAG large pipe system (all hydraulic) including molds, bases, support rings, various accessories and forklift with turning tongs OMAG large-diameter pipe system (all hydraulic) including moulds, lower sleeves, support rings, various accessories and forklift with turning pliers
1 pcs used tool milling machine Make of lid Model FP 3 A Control Dialog 11 Technical data: Travel X,Y,Z 400,300,400 mm Clamping area 700 x 400 mm Quill stroke 80 mm Spindle drive 3kW Speed 3150 rpm Spindle holder SK 40 Machine dimensions L x W x H 2400/2200/1900 mm Machine weight approx. 2500 kg, Accessories: Grundig Dialog 11, fixed angle table, electronic handwheel, documentation Errors of technical data and prior sale excepted
Size: 720 x 1020 mm Impression: 300 Mio. Equipments: Plate Cylinder Cocking blanket wash up device: autom. SAPC semi automatic plate changer Grafix Digitronic powder device wash device for impression cylinders Mitsubishi Delta Dampening Refrigeration & Recirculation System Non-Stop Feeder IPC II Intelligent Press Control high speed separator
A continuous servo side sealing machine IFP for the food industry is available. Packaging capacity: 100 packages/min, max. sealing dimensions: 650mm, max. sealing length: unlimited, film material: PP/POF/PVC, max. film reel width: 800mm, max. film reel diameter: 350mm, working height range: 870mm-930mm, output: 9kW, machine dimensions X/Y/Z: approx. 1800mm/2650mm/1500mm, control: Siemens. Documentation available. On-site inspection is possible.
Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available.
x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 turning speeds: 6300 U/min tool taper: SK40 quill stroke: 80 mm table-size: 550 x 1000 mm table load: 0,6 t total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Qty. 1 Second-hand aluminium extrusion press line Code Aluminium HE9 6063 Mfc.: Indian manufacturer Built: 1978 PLC hydraulic – upgradation done in the year 2005! Total Force of Press: 680 MT, 750 UST Extrusion Pressure: 210 Bar Billet Diameter: 5”, 121 mm Weight per Inch of Billet: 0.76 kg/inch Scope of supply: Log heating furnace Hot shear Extrusion press Overhead puller Under-bed cooling system Run-out cooling bed Belt conveyor Stretcher Cutting machine Die oven Conveyor table Conveyor for final packaging
Width 94 cm Year of construction 1998 Longitudinal seam device Folding floor equipment Disc underglue unit left Gluing device HHS for cold glue 4 nozzle glue heads Small format equipment Valco Code Reader Ejector Pressing tape Price on request. We supply and install worldwide.
average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel appx dimensions: L 3.470 mm.x W 1.500 mm. bent steel structure, electric motor DIAGONAL AUGER, 1,5 Hp drive diam +/-150 mm. – width +/- 1000 mm. – length +/- 1500 mm. – bolted upper cover, de-pre ...
Stock# U2464-1 Used dissolver by Diaf A/S (DK) model FFBH49EX. Has single stainless steel shaft with working length 700 mm. Shaft is belt driven by el motor 37 kW, 1475 rpm, 380 V, 50 Hz. Dissolver has toothed disc with diameter 410 mm and side wall scrapper with teflon blade, driven by el motor 1.1 kW and reducer. Working rotation of shaft adjustable by hydraulical change of pulleys diameter (hydraulical drive power 0.12 kW). Rising and lowering of agitator in range 109 cm - hydraulical - pump motor with power 1 kW. Machine has local control panel and electric cabinet.
2018 Folding Carton Line Longitudinal Seam Carton: max. 1,150 x 600 mm min. 75 x 55 mm min. 45 x 55 mm (with small carton device) Fold-bottom carton: max. 1,150 x 600 mm min. 146 x 80 mm 4-point erecting carton: max. 1,150 x 680 mm min. 120 x 110 mm 6-point erecting carton: max. 1,150 x 630 mm min. 250 x 130 mm with BELKHOFF control system BAUMER HHS Xmelt gluing system Rolling and drying tunnel TÜNKERS EAS 480 output station, right, 2019 in production available: 10/25 located: Germany
Philips Diagnost TH/FS/VE with the following system components: - Generator Optimus 50 - Tube SRO 0951 0.3/1.0_Bj. 2014 - Tube tripod Diagnost FS - Vertical tripod Diagnost VE/VT Can also be used as a pure lung X-ray workstation. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a sp ...
width of the strips: 100 mm band length: 2000 mm band speed: 15/30 m/sec tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad connected load frequency: 400 V total power requirement: 2,5 /3,3 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,2 x 0,75 x 1,4 m Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Qty. 1 Second-hand extrusion press line Mfc.: Breda Sutton, Cometal, OMS Type: oil hydraulic, Dia.: 7 inch, 178 mm Force: 1600 MT Built: 1977 Fully reconditioned in 1995 Scope of supply: Log feeder Billet Furnace Hot Shear Extrusion Press Run-out Table Puller Cooling Bed Stretcher Finishing saw Aging Furnace Die Furnace
Qty. 1 Second-hand Shot-Blasting Line Mfc.: COGEIM – SAS Eng. Built: 2016 Dismantled and in storage Type: 4 Turbines Material to be processed: Bars’ length: min. 6.000 – Max. 12.000 mm Approximate work pieces dimensions and weight: Dimensions: round Ø 30 - 110 mm No. of simultaneously processed bars 7 up to Ø= 60 mm; 4 for bigger diameters
Key data: 1600 kN, 359 g/PS, 50 mm
Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pulls and robot connection, with quality control program. - Immediately available in our warehouse in Budapest, loaded onto the customer's truck free of charge or delivered to the customer's home for a refund of freight costs. - Function-tested (functional guarantee) - The machine can also be checked when it is switched on Information about the machines we offer and our company: - We only sell machines that we own and can be purchased from our warehouse in Budapest. - We inspect and test each offered machine before delivery - we do NOT sell non-functional goods - we are NOT a third-party intermediary. - All machines offered come from successful companies for which maintenance and care are a matter of course - all offered mac ...
Box format: Length: 100 mm - 400 mm Width: 50 mm - 320 mm Equipment: Standard, right-hand delivery, box material: 200-700 g/m², Box types: normal folding boxes, folding bottom boxes, 4-point erecting boxes, 6-point erecting boxes. Machine can be viewed by appointment while running.
Weber Waagenbau u. Wägeelektronik, Automatic scale for weighing, year of construction 1989, with Weber control Dialog 165V-SWA, year of construction 2001, max. 2.5 kg, used, Can be viewed on site beforehand,
Format range: max. 940 mm, min. 50 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-pect, 8 channel with 3 application heads, disc underglue unit left, Pre-crusher right and left, kicker, counter, vibrator on the feeder, digital Position indicators, threading station, lower center feed in folding, pneumatic, intermittent press belt, cleaned, tested.
Semi-automatic setting Commander with touchscreen Book measuring table Stand-alone pre-heating device : IR Infeed conveyor Star feeder Rounding and backing station Glue unit (Excluding gauzing station) Book mark suction device Head and tail banding station Casing-in station Case pre-stacking conveyor Case bending station Müller Martini VBF EP 680L : Semi-automatic setting, Pressing station, Left hand infeed Book Stacker, Müller Martini BLSD 650 D
Jenbacher Diane XT Manufacturer: Jenbacher Serial No: 18854 Manufacture Year: 2006 Standard: ICE 60439-1 If you are interested in our stock, contact us today to get a quote.
Doka diagonal crosses in âââ star quality. The diagonal crosses are used to reinforce shoring frames. 💡 All advantages at a glance: quick and easy assembly thanks to permanently connected diagonal braces secure and quick attachment to the shoring thanks to innovative locking pawls different lengths for variable frame spacing from 1.00m to 3.00m in 50-cm-increments clear length identification using color clips and embossing compatible with both the Staxo 40 and Staxo 100 shoring systems 🔧 ⚙ 🔨 The material is supplied in stacking pallets, these are not included in the unit price. Price: from € 30,60 / PCS (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwor ...
De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.
Manufacturer: Diasorin Model: Liaison XL Year of Manufacture: 2009 -2010 Type of machine : Chemiluminescence Immunoassay Analyzer Delivering greater testing efficiency on a single, fully automated platform, LIAISON® XL represents a new benchmark in automated specialty testing. With an all-in-one process and true continuous loading, this powerful, high-volume chemiluminescence analyzer frees up time when resources are scarce. And because LIAISON® XL easily pairs with all existing laboratory automation tracks, you can easily add pre- and post-sampling modules to create a single and fully automated specialty testing solution. Find more here - / Contact us at -
- Painting booth - Diana serie with horizontal ventilation - Modern technology: - Dust free operation - paint overspray collection system - Stable spraying temprature - Control box with safety function -
x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm CNC-control: DIALOG 11 spindle taper ISO: 40 spindle turning speed range: 31 - 5.000 U/min table-size: 620 x 390 mm table load: 250 kg power capacity: 5,5 kW feeds -stepless-: 2 - 6.000 mm/min quill stroke: 80 mm coolant: voltage: 380 V total power requirement: 11,0 kVA weight of the machine ca.: 1,65 t dimensions of the machine ca.: 1,85 x 1,90 x 1,80 m electric cabinet: 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
LBBC Boilerclave Internal dims: 900mm diam. x 1100mm long Max. working pressure 8.6bar Design Temperature 200deg.C Jacket input power 75KW
General SKU208X042 LocationBarneveld CEcheck MakeMecanicas Enguita TypeWAS 9.8 Pressure Working pressure8 Bar Main Features MaterialStainless steel Motor18.5 KW Surface12.3 m2 Length2500 mm Specified Features - Roll dryer Roll dryercheck Rolls chromium platedcheck Roll surface12,3 m² Roll sizesDia. 1250x2500 mm Steam heatingcheck Max. temperature100°C/175°C With knife dischargecheck Motor18,5kW, 400V, 1470 rpm MaterialCast Iron Hard Chromium Information No.5626 Year of construction2004 Mounted on framecheck With switchgearcheck (as is) Floorspace2,40x3,14 m Total height2,90 m Extra SpecificationsVolume 2600 l equipped with 2 steel rollers and 2 lined rollers Roll dryersEnguitaDryers > Roll dryersBrand > Enguita What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...
quantity: 1 STK -> 80006.15206 -> m=0.5 - 1.5/20° Various diamond dressing wheels from Fässler available. Application: Dressing grinding wheels / precision machining Price per piece, discount for multiple purchases The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
quantity: 1 STK -> 80018.16854 -> R1=550/5.0 -> m=1.5-5.0/18° -> DP=17-5 Verschiedene Diamant-Abrichtscheiben von Fässler verfügbar. Anwendung: Abrichten von Schleifscheiben / Präzisionsbearbeitung Preis pro Stück, bei Mehrabnahme Rabatt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU208X043 LocationBarneveld MakeWurm Dietzel Pressure Working pressure8 Bar Main Features MaterialChromed steel Motor18.5 KW Surface10.4 m2 Length2800 mm Specified Features - Roll dryer Roll dryercheck Rolls chromium platedcheck Roll surface10,2m² Roll sizesDia. 991x2800 mm Steam heatingcheck Max. temperature100°C-175 °C With knife dischargecheck Motor18,5kW, 400/690V, 1460rpm Roll speed3-9 tpm Roll dryers Rotating drum dryercheck Adjustable drum inclinationcheck MaterialCast Iron Hard Chromium Information TypeUnknown Year of constructionUnknown (missing type plate) Mounted on framecheck With switchgearcheck (as is) Floorspace1,0x2,8 m Total height2,8 m Extra Specificationsvolume: 1900 l equipped with 2 steel application rollers and 2 lined rollers discharge with scraper Roll dryersWurm DietzelDryers > Roll dryersBrand > Wurm Dietzel What you ...
quantity: 1 STK -> 80277.14314 -> m=1-3/22.5° Various diamond dressing wheels from Fässler available. Application: Dressing grinding wheels / precision machining Price per piece, discount for multiple purchases The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
quantity: 1 STK -> 80094.15204 -> m=0,5-2/22,5° Various diamond dressing wheels from Fässler available. Application: Dressing grinding wheels / precision machining Price per piece, discount for multiple purchases The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
quantity: 1 STK -> 107078.11974 -> m= 1 - 1.5 / EW 18° Various diamond dressing wheels from Fässler available. Application: Dressing grinding wheels / precision machining Price per piece, discount for multiple purchases The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
quantity: 1 STK -> 80277.14315 -> m= 1 - 3 / EW 22,5° Various diamond dressing wheels from Fässler available. Application: Dressing grinding wheels / precision machining Price per piece, discount for multiple purchases The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
