129,014 used machines on RESALE, but how to find them? Machine Search
Verticale drilling unit, 3 spindles suitable for IMA - incompatible with a Weeke plug
x-travel: 1000 mm y-travel: 508 mm z-travel: 460 mm size of pallet: 1240 x 550 mm numbers of pallets: 2 workpiece weight: 800 kg spindle taper ISO: 40 spindle motor: 5,5 kW turning speed range: 28 - 4000 U/min no. of tools in magazin: 30 control: MAZATROL M 1 total power requirement: kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 4,50 x 3,00 x 2,65 m acc.: chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 2000 mm gear width: . mm max. module: 22 max. hob diameter: 250 mm hob turning speeds: 16-92 U/min total power requirement: 13 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
inner taper of milling spindel: Sk40 collet diameter: nein turning speed range: 300 bis 3000 U/min drive motor: 15 kW weight of the machine ca.: 0,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
in stock on pallet Auction-ID: A1-45495-464
inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/min drive motor: kW distance spindle - column: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ID3763 Sandvik Pantera DP1100i Year of construction 2014 approx. 11.060 hours/hours Blasting hole drill rig, with rod changer, cab with safety grille, radio, roller blinds for cab windows, TIMi – rig alignment instrument, hydraulic tail supports, central lubrication system, all servicing carried out by Sandvik, good condition, the last hammer service was carried out 300 operating hours ago & the last safety inspection in January 2026. Blast hole drilling rig, with rod changer, cab with protective grille, radio, roller blinds for cabin windows, TIMi – carriage alignment instrument, hydr. Bottom supports at the rear, central lubrication system, all service done by Sandvik, good condition, the last hammer service was carried out 300 hours ago & the last safety inspection in January 2026
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
brand: CKD BLANSKO Model: SKHK 50 plateau diameter: 4770 mm maximum diameter: 5200 mm ram stroke: 2000 mm maximum height: 3000 mm capacity: 50 ton. Plateau revolutions: 1 range: 0.4-12/ 2 range: 1.6-50
Vertical tank manufactured by aguilar and rooms in stainless steel 316L with a total capacity of 610 liters (500 useful liters). Flat top bottom with folding lid with handle and stirring support (triple-blade propeller type) Conical bottom with discharge through the bottom (DN50 PN10). About 3 posters. General characteristics: Maker AGUILAR AND ROOMS Guy Vertical mixer tank Material Stainless steel 316L Year of manufacture 1995 Weight 150 kg Body Atm design pressure Ambient design temperature Specifications: Volume 500 L (TOTAL: 610 L) Background type Sup. flat - conical inf. Type of agitation Triple-belic propeller Envelope 3 posters Upper bottom tubulatures x1 Lower bottom tubulatures x1 Outer diameter body 850 mm Body thickness 3 mm Body height 1000 mm Body height + backgrounds 1255 mm (TOTAL WITH AGITATION: 1995 mm) Top bottom thickness ...
Diametro Tavola Rotante: 1000 Posizioni Tavola: 2 Canali caldi: 8
Vertical tank made of stainless steel with a capacity of 650 liters. Top klopper bottom with feed flange Body with 3 flanges Bottom klopper with discharge flange Mounted on 3 legs General characteristics: Guy Vertical tank Material Stainless steel Year of manufacture 2003 Weight 160 kg Technical features: Design pressure: 7 bar Test pressure: 10 bar Design temperature: ambient Characteristics of the flanges: Top bottom: Power supply: DIN2576 PN10 DN15 AISI316L Body For visual level: x2 DN25 PN10/40 AISI316L DIN2576 PN10 DN15/21.3 AISI316L Bottom bottom Download: DIN2576 DN15 PN10 AISI316L Specifications: Volume 650 l Background type Klopper Envelope 3 legs Upper bottom tubulatures x1 Lateral tubulatures x3 Lower bottom tubulatures x1 Outer diameter body 600 mm Body height 2000 mm (TOTAL: 2700 mm) Lower exit height 190 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. General characteristics: Material Stainless steel Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 700X860 mm Outer diameter body 805 mm Body height 1040 mm
Vertical tank made of stainless steel with a useful capacity of 400 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (400 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 880 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (500 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 900 mm
Vertical tank made of inozidable steel with an approximate capacity of 220 liters. Flat top bottom with removable lid and manual closures. On the lid there is a man's mouth with manually folding lid, tubulaadura with NW type thread and tubuladura with inner thread. Inclined flat bottom with flange for discharge. Mounted on 3 legs. General characteristics: Maker SCHRADER Material Stainless steel Upper bottom tubulatures: Thread NW outer diam 65 mm - inner diam 38 mm Inner thread junction 30 mm Lower bottom tubulatures: Discharge flange: 97 mm outer diam - 38 mm inner diam Specifications: Volume 220 l approx. Background type Slope Envelope 3 legs Upper bottom tubulatures x2 Lower bottom tubulatures x1 Man's mouth 300 mm Outer diameter body 600 mm Body height 850 mm
Controllo: CC-200; Euromap: 200/80; spessore stampo: 450 min; corsa piano mobile: 357.
Vertical tank manufactured by GIUSTI in stainless steel with a total capacity of 198 liters and a useful volume of 160 liters. Domed upper bottom bolted to the body with 4 clamp connections and 2 handles. Lower bottom bulged with discharge from the bottom by valve. Clamp output connection. On structure with wheels. General characteristics: Maker GIUSTI Guy Vertical tank Material Stainless steel Year of manufacture 2007 Design pressure: -1/+1 bar Design temperature: 150 ºC Working conditions: 0.5 bar at 30 ºC Test pressure: 1.7 bar at 10+-5 ºC Specifications: Volume 160 L (TOTAL: 198 L) Background type Convex Envelope Wheels Outer diameter body 600 mm Body height 550 mm
Vertical tank manufactured by SKERMAN in stainless steel with a capacity of 100 liters. Domed top bottom with 1 peephole and 4 clamp connections Bottom bulged with discharge from the bottom and propeller-type agitation of 4 blades. On 4 wheels. General characteristics: Maker SKERMAN Guy Vertical tank with agitation Material Stainless steel Year of manufacture 2009 Design pressures (min/max); empty / 1.1 bar Design temperature: (min/max): +5/+25 ºC Test pressure: 1.6 bar Specifications: Volume 100 L Background type Convex Type of agitation Propeller Agitation motor 0.5 hp - 0.37 kW Envelope 4 wheels Upper bottom tubulatures x4 clamp Lower bottom tubulatures x1 Outer diameter body 700 mm Body height 250 mm
Vertical tank made of stainless steel with a capacity of 100 liters. Domed upper bottom screwed to the body with 2 peepholes, 3 clamp connections and motor for agitation. Conical bottom with discharge from the bottom. It has a pump located under the lower bottom for the recirculation of the fluid. On 4 wheels. General characteristics: Guy Vertical tank Material Stainless steel Specifications: Volume 100 L Background type Bulging sup. - conical inf. Agitation motor 0.5 hp - 0.37 kW Envelope 4 wheels Upper bottom tubulatures x3 Lower bottom tubulatures x1 Peepholes x2 Outer diameter body 750 mm Body height 250 mm
Vertical tank made of stainless steel with a capacity of 150 liters. Domed upper bottom with 6 clamp connections and 2 ears for elevation. With a side entrance. Lower bottom bulged with discharge from the bottom by valve and propeller-type agitation without motor. On 4 wheels. General characteristics: Guy Vertical tank with agitation Material Stainless steel Specifications: Volume 150 L Background type Convex Type of agitation Propeller Envelope 4 wheels Ears x2 Upper bottom tubulatures x6 clamp Lower bottom tubulatures x1 Outer diameter body 550 mm Body height 600 mm
Vertical tank made of inoxidbale steel with a capacity of 500 liters. With half a cane, calorifugated, on 3 legs and with a manually folding lid. Sloping bottom. General characteristics: Material Stainless steel Specifications: Volume 500 L Background type Inclined bottom Half a cane + Lagging + Envelope 3 legs Outer diameter body 900 mm (TOTAL: 1,300 mm) Body height 800 mm (TOTAL: 2,000 mm)
Doosan 3-Axis CNC Vertical Machining Center Heavy-Duty 3-Axis Vertical Machining Center Built for aggressive cutting capacity, this 2018 Doosan Mynx 7500/50 is a robust 3-axis CNC vertical center ideal for heavy part machining and high-productivity workflows. Technical Details 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Doosan Model: Mynx 7500/50 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 1525 mm / 762 mm / 625 mm Table size: 1600 x 750 mm Max. workpiece weight: 1500 kg Spindle speed: 60 – 6000 rpm Spindle motor power: 18.5 / 22 kW Max. torque: 452 Nm Spindle taper: DIN 69871 B SK 50 Distance spindle nose to table: 200 – 825 mm Distance spindle center to column: 785 mm Rapid traverse (X, Y / Z): 30 m/min / 24 m/min Feed rate (X, Y, Z): 1 – 12,000 mm/min ...
Hartford 3-Axis CNC Vertical Machining Center Late-Model 3-Axis CNC Vertical Center This 2021 Hartford HCMC-1682 offers exceptional structural rigidity and modern CNC capabilities, providing a highly efficient and reliable solution for versatile 3-axis milling. Technical Details 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Hartford Model: HCMC-1682 Machine number: 100000755 Year of manufacture: 2021 Controller: Fanuc OiMF PLUS 2. Operational parameters Travel (X / Y / Z): 1,600 / 820 / 660 mm Table Size: 1,750 x 820 mm Max. Table Load: 2,200 kg Spindle Taper: ISO50 Spindle Speed Geared: 4,000 / 6,000 / 8,000 RPM DDS: 10,000 / 12,000 RPM Spindle Power: 11.0 / 15.0 kW (options up to 26 kW) Rapid Traverse (X / Y / Z): 20 / 20 / 18 m/min Number of ATC Stations: 32 Spindle Nose to Table: 150 – 810 mm Electri ...
Toyoda 3-Axis CNC Vertical Machining Center Robust 3-Axis Vertical Machining Center Designed for stability and endurance, this 2008 Toyoda FV 1365 provides high-accuracy 3-axis CNC milling to support a wide variety of industrial metalworking applications. Technical Details 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Toyoda Model: FV 1365 Machine number: 0831 Year of manufacture: 2010 2. Operational parameters Travel (X / Y / Z): 1300 mm / 650 mm / 600 mm Table size: 1100 x 650 mm Max. load on table: 900 kg Spindle: 18.5 kW; 6000 rpm Tool holder: BT50 Tool magazine: 30 positions Control: Fanuc 3. Weights Machine weight: 7000 kg 4. Dimensions Overall dimensions (Width x Length x Height): 3506 x 3624 x 2940 mm Disclaimer: The technical specifications provided are for gene ...
Vertical turning machine manufactured in 2003. This DAEWOO PUMA V550 features an X-axis travel of approximately 390 mm and a Z-axis travel of approximately 780 mm. With a robust machine weight of 9000 kg, it is designed for durability and performance. If you are looking to get high-quality turning capabilities, consider the DAEWOO PUMA V550 machine we have for sale. Contact us for further details regarding this machine.
PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T
This 3-axis Goodway GV 780 M vertical turning machine was manufactured in 2015. It features a maximum machining diameter of 820 mm and an X-axis travel of 500 mm. The machine includes a 450 mm main chuck and a turret with 12 positions, including 4 driven tool stations. If you are looking to get high-quality turning capabilities, consider the Goodway GV 780 M machine we have for sale. Contact us for further details.
This 4-axis Famar Pronto 6 was manufactured in 2004 and fully overhauled in 2024. It features a maximum turning diameter of 250 mm and a turning length of 240 mm. The machine is equipped with a 12-position Sauter turret for driven tools and has a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Famar Pronto 6 vertical turning machine we have for sale. Contact us for further details.
This 3-axis TBI VC 1060 HH was manufactured in 2020. It features an X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1100 x 500 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the TBI VC 1060 HH vertical machining centre we have for sale. Contact us for further details.
Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system
This 3-axis DMG Mori Seiki DMC 635V ecoline was manufactured in 2013. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine that holds up to 30 tools. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki DMC 635V ecoline vertical machining centre we have for sale. Contact us for further details.
This 5-axis DMG MORI DMU 60 Monoblock was manufactured in 2016. It features an X-axis travel of 730 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful motor spindle capable of reaching speeds up to 18,000 rpm and includes a 24-pocket tool changer. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 Monoblock vertical machining centre we have for sale. Contact us for further details.
This 3-axis NIKKEI VH-1010 was manufactured in 2007. It features a table size of 1200 Ã 450 mm and a maximum table load of 450 kg. The machine offers impressive axis travels with an X-axis of 1010 mm, Y-axis of 500 mm, and Z-axis of 520 mm. If you are looking to get high-quality machining capabilities, consider the NIKKEI VH-1010 vertical machining centre we have for sale. Contact us for further details.
This 4-axis MIKRON VCE 750 was manufactured in 1998. It features impressive travels of 762 mm in the X-axis, 510 mm in the Y-axis, and 560 mm in the Z-axis. The machine includes a tool magazine with 20 positions and a maximum table load capacity of 1,360 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON VCE 750 vertical machining centre we have for sale. Contact us for further details.
This 4-axis DMC 104 V linear was manufactured in 2005. It features an impressive X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust clamping surface of 1250 mm x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMC 104 V linear vertical machining centre we have for sale. Contact us for further details.
This 3-axis HAAS VF-2SS was manufactured in 2014. It features advanced capabilities including tool measuring and a probe for enhanced precision. With a feed cutting time of 5327 hours, this vertical machining centre is designed for efficient operations. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS machine we have for sale. Contact us for further details.
From the roll to the bag! Manufacture bags according to desired format and fill and seal with the product. Description - Optimal price-performance ratio - Easy operation and cleaning - Low maintenance - Stainless steel version (1.4301) with safety Plexiglas - Control is carried out by a PLC, color touch display with intuitive operating software - Fast, tool-free bag format change - One format included Specifications - Intermittent heat sealing for hot sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 180-520mm - Bag dimensions (LxW): 60-350mm x 70-250mm - Cycle rate: 15-50 bags /min. (depending on VE) - Electrical power: 3.5 KW / 220V / 50(60) Hz - Compressed air consumption: 700 l/min at 6 bar - Dimensions (LxWxH): 1540mm x 1160mm x 1600mm - Weight: 450kg
This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 Ã 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine.
maximum number of results exceeded
please refine your search
50 € 
