vertical lathe dia used for sale

Measuring stand, tripod, dial gauge holder, dial gauge, test stand, dial gauge holder, precision measuring table, precision measuring table, micrometer holder, dial gauge stand, magnetic measuring stand, dial gauge stand - Dial gauge holder: with knurled nut mount Ø 8 mm -Item No.: T08043-0 -Hole spacing: Ø 112 x 7 mm -Number: 22x holders available Price: per piece -Dimensions: 130/38/H400 mm -Weight: 0.3 kg/piece

Diaphragm pump, centrifugal pump, water pump, chemical pump -Flow rate: 12 l/min -Self-priming: up to 1.5 m (when dry) Liquid temperatures: 7 - 54 degrees -Pressure: 1 bar during continuous operation -Amperes: 2 A -Connection: 24 Volt DC Quantity: 1 piece available -Dimensions: 220/120/H160 mm -Weight: 2.7 kg

Quick clips for electrical duct diameter 25-30mm NEW CONDITION 13 boxes of 100 pieces Total 1300 pieces Possible to send by post (+additional cost) Auction-ID: A1-44895-1

- Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-73

Parcel of 262 natural diamonds with a total weight of 5.00 ct. The stones are made in a round brilliant cut and have a uniform size of approx. 1.60 – 1.70 mm. In terms of colour, it is a mixture of brown and grey diamonds in different intensities, combined with a clarity range of VS1 to SI3. The uniform grading and the small caliber size make this lot particularly suitable for jewellery production, e.g. pavé or trimming work. Item number: 269100481031 Auction-ID: 04G-AVG-2

3 natural Fancy Yellow diamonds in cushion brilliant cut with a total weight of 1.17 ct. Different shades of yellow with characteristic colour intensity. Supplied in sealed GWLAB packaging including certificate. Suitable for jewellery production or further processing in commercial trade. Item number: 269106651036 Auction-ID: 04F-RBA-2

Good condition Auction-ID: A7-45427-48

Parcel of 142 natural coloured diamonds with a total weight of 5.00 carats in round brilliant cut. The bricks have a uniform size of approx. 2.00 to 2.10 mm and are available in a sealed GWLAB blister card including a certificate. It contains a mixture of different colours such as yellow, brown, green and grey with purities from VS2 to I1. Suitable for jewellery making, pavé work and series production. Item number: 250110391022 Auction-ID: 04G-AVF-2

Pneumatic diaphragm pump with pressure multiplier. New equipment

Comparator with digital odds readers; Supply voltage: 220 V, 50-60 Hz.Serial: 406 Estimated weight: 150 kg Approximate dimensions: 800x600xh900 mm Auction-ID: A7-44996-192

Set of 10 boxes of 200 screws diameter 4 mm length 30 mm Auction-ID: A1-45282-191

Set of 6 boxes of 200 tx 25 screws diameter 5 mm length 50 mm Auction-ID: A1-45282-192

unused; in a suitcase; Max brick drill diameter 132mm; Max concrete drill diameter 80mm; no load speed 1 720-1230rpm; no load speed 2 1000-1780rpm; with water supply; 7749 Auction-ID: A1-45773-307

unused; in a suitcase; Max brick drill diameter 132mm; Max concrete drill diameter 80mm; no load speed 1 720-1230rpm; no load speed 2 1000-1780rpm; with water supply; 7749 Auction-ID: A1-45773-306

A set of diagonals with dimensions of 99cm and 116 cm suitable for 110 cm deep racks of Alser brand. Auction-ID: A1-45489-19

Including: Sony SVO9500SD0 Video Cassette Recorder Sony UUP890MD Video Graphic Printer Mitsubishi CP700 Printer Fujitsu MDC3064SS External Drive Auction-ID: A1-45803-47

Composed of 2 pcs: base size 30 x 45 mm Overall dimensions: 200 x 300 x 200 mm Weight: 4 kg Auction-ID: A7-45834-308

Lot of 2 magnetically based dial gauge holders with dial gauges, never used Overall dimensions: 200 x 200 x 150 mm Weight: 2 kg Auction-ID: A7-45833-239

Lot of 2 magnetically based dial gauge holders with dial gauges, never used Overall dimensions: 200 x 200 x 150 mm Weight: 2 kg Auction-ID: A7-45834-288

Composed of 2 pcs: base size 30 x 45 mm, never used Overall dimensions: 200 x 300 x 200 mm Weight: 4 kg Auction-ID: A7-45833-227

Composed of 2 pcs: base size 30 x 45 mm, never used Overall dimensions: 200 x 300 x 200 mm Weight: 4 kg Auction-ID: A7-45834-227

Composed of 2 pcs: base size 30 x 45 mm Overall dimensions: 200 x 300 x 200 mm Weight: 4 kg Auction-ID: A7-45833-308

Lot of 2 magnetically based dial gauge holders with dial gauges, never used Overall dimensions: 200 x 200 x 150 mm Weight: 2 kg Auction-ID: A7-45833-288

Lot of 2 magnetically based dial gauge holders with dial gauges, never used Overall dimensions: 200 x 200 x 150 mm Weight: 2 kg Auction-ID: A7-45834-239

Item No. DOS-ST-NK4 - with new stainless steel tank 110ltr. Content with lid and new electrics - Delivery capacity of the SERA R412-SO dosing pump, 500 ltr./h - 0.37 kW, buffer fluid 260cm³ - 1 year functional warranty

ITEM NO. DOS-JT-43 - with dosing container 75 litre capacity - Flow rate of the HB43 metering pump 120 ltr./h - With connection fittings that enable "driving in a circuit" - With bag rack - All threaded connections DN 40 DIN 11851 - 1 year functional warranty

Core drilling machine / diamond drill Brand: Daewoo Type: DADK-D230BE Peak power: 4580 watts Speed: 100-530 RPM (infinitely adjustable) Max. Drilling Diameter: 230 mm Max. Drilling Depth: 550 mm Drill connection: 1/2 inch internal, 5/4 inch external Equipped with: digital display Equipped with: connection for water cooling Equipped with: 30 milliamp residual current device (PRCD) Tripod: Adjustable aluminum tripod Condition: unused, in the original packaging Attention: diamond drill bit not included Auction-ID: A3-43515-499

IN WORKING CONDITION. TESTED FOR FUNCTION There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-44605-87

OTTO WOLPERT WERKE Dia Testor 3 B – Hardness Tester (Durometer) General data: Manufacturer: Otto Wolpert Werke Model: Dia Testor 3 B Serial number: 2777 Weight: approx. 300 kg Dimensions (L x W x H): approx. 1000 x 800 x 1800 mm Condition: Untested Description: Industrial hardness tester (durometer) designed for measuring material hardness in laboratory or production environments. The machine is suitable for quality control and material testing applications. Auction-ID: A7-45351-36

Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 100-300 mm, Depth: 350mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 570 x 170 x 55 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-221

L + Z lathe HOLZMANN type ED 914GNMasch. No. 20265 Year of construction 2006Center width 800 mmTurning diameter over bed 300 mmCenter height over bed 150 mmTurning diameter over support 190 mmCenter height over support 95 mmSpindle bore 38 mmSpindle speed 70 - 1400 rpm. 9 stepsFeed longitudinal and flatChuck flange Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Drive power 1.5 kWNet connection 400 volts, 50 Hz- Spindle speed over 9 gear stages - 4-jaws

Vertical band saw HESKA type ESA 4Fabr. No. 681174 year of construction approx. 1985Roller diameter 420 mmThroat depth 400 mmTable size 500 x 500 mmCutting height 285 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed Gear stage (1) 15-140 m/min. Saw blade speed gear stage (2) 150-1400 m/min. Motor power 1.5 kWNet connection 380 volts, 50 Hz - stepless saw blade speed via PIV gearbox with handwheel adjustment and 2 gear steps - saw table swivel in 2 axes -

Vertical band saw MÖSSNER REKORD type SM 420Masch. No. 17010 Year of construction 1968Roller diameter 420 mmRadius in width 415 mmRadius in height 265 mmTable size 605 x 600 mmBelt speed 18 - 562 m/min. 8 stepsSaw blade length min/max. 3150 / 3260 mmDrive power 1.1 / 1.7 kWNet connection 380 V 50 Hz- Saw blade speed over 4 gear stages and 2 motor speeds- Saw blade butt welder IDEAL BS 0-16 with scissors and grindstone- swivelling work table in 2

Vertical band saw JAESPA type MSU 4Fabr. No. 724749 year of construction approx. 1980Roller diameter 420 mmProjection 400 mmTable size 610 x 610 mmCutting height 260 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed 10-1500 m/min. infinitely variableMains connection 400 volts, 50 Hz- infinitely variable saw blade speed via 2 gear stages and infinitely variable via belt drive- Saw table swivel- Saw blade butt welding machine IDEAL BS0-16- Saw blade shear- Sharpening stone for grinding the weld seamSpace requirement L x W

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2021 Model: Modula Lift ML 50D Height: ...

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2013 Model: Modula Lift ML 50D Height: ...

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 200 run hours !Available immediately.; As new

Table diameter: 2,000 mm Max diameter of workpiece: 3,000 mm Main drive: 60 KW Speed rotation of the table: 2.8 - 162 rpm Max workpiece height under the cross member: 2,500 mm Travel RAM: 1,750 mm Tool magazine: 12 workstations Machine Weight: 35 t Accessories: Grinding spindle and various tool holders 3000 rpm Wheel diameter 250 mm

Machine weight: 20,000 kg Faceplate diameter 1250 mm Number of supports: 1 pcs Dimensions: height 4250 mm width 5630 mm depth of 3550 mm Extras: copying apparatus, turret head on the vertical support Technical condition at the time of sale: Replacement rotary amplifier on thyristor converter. Not operated since 1994 p. Small repair and adjustment of electrical and mechanical parts. The maximum dimensions of a workpiece Height 1150 mm The diameter of 1400 mm Weight 8000 kg

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Control: SIEMENS 840 D - Axes: 2 - Cutting feed rate (X x Z): 0.1 - 3.000 mm / min - Power of driven tool: 37 kW - Weight: 25 t

Used machine in good condition. Available for immediate delivery. - Power source : 30 kVA - Control: CNC HEIDENHAIN TMC 530 - Tool magazine capacity: 20 # - Maximum tool diameter ?: 65 mm - Weight: 7.5 t

Used machine in good condition. Available for immediate delivery. - Control: SINUMERIK 880 T 3 - Max. length: 400 mm - Tool-holder cone: CONO ISO 50 - Tool magazine capacity: 16 #

turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.

CNC vertical lathe Type: SKJ 12 NC Manufacturer: TOS Control: Mefi Max workpiece diameter: 1400 mm Clamping plate diameter: 1250 mm Maximum workpiece height: 1150 mm Maximum workpiece weight: 6000 kg Clamping plate speed: 2.5 - 225 rpm Main motor power: 37 kW Machine weight: 13000 kg In good condition, under power Find more here - / Contact us at -

CNC Vertical Turret Lathe with C axis and live tool 3 Turning Plates Changer (translating pallet system) EQUIPPED WITH: Siemens Sinumerik 840C CNC Control (2015 Retrofit) Vertical Ram with Live Spindle Pallet Changer (3-Pallets) 16-Station Automatic Tool Changer C-Axis Table Year 2005 CNC Siemens 840 C Max. turning dia.: 2200 mm Max. turning height: 1800 mm Ram travel: 1500 mm Main drive: 75 kW Live spindle: 15 kW Spindle rotations: 45- 1350 1/min Max. workpiece weight: 12 000 kg Pallet changer with 3 pallets (turning plates) Tool magazine: Right: 8 turning tools Left: 8 boring/milling tools Feeds: 0,1-6000 mm/min Carriage feed: Vertical: 1500 mm Horizontal: 1320 mm Table rotation (2 ranges): 2,5 – 70 / 10-280 Max. table torque: 50 000 Nm Machine weight: 43 Ton Machine HxWxL: 6,8 m x 10 m x 9,7 m