127,294 used machines on RESALE, but how to find them? Machine Search
A VICTOR lathe 500x1000. Distance between centers: 830mm, center height over bed: 250mm, max. turning diameter: 500mm, longitudinal travel: 800mm, spindle bore: 80mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1200mm, weight: approx. 1500kg. An inspection can be arranged by appointment.
Key data: 554 mm, 2000 mm
Turning length: 2,000 mm Turning diameter: 554 mm above bed 370 mm over cross slide Spindle bore: Ø 104 mm Spindle speeds: 2,000 rpm 3-jaw chuck: Schunk Ø 350 mm Camlock Control: GE Fanuc Equipped with: - 1x Fixed bezel Ø 245 mm - 1x Fixed bezel Ø 390 mm - 18 Ready tool containers - Various jaws for food - Centering tips - Cooling system -Operating instructions Country of origin: UK Motor power: 7.5 kW Machine LxWxH: 410 x 200 x 175 cm Machine weight: 3600 kg
Swing diameter over bed/cross slide: 700mm/430mm, turning length: 4000mm, spindle bore: 80mm, speed: 1500rpm, bed width: approx. 550mm. Machine dimensions X/Y/Z: approx. 6300mm/1350mm/2000mm, weight: approx. 5700kg. An on-site inspection is possible.
Center height: 210mm, distance between centers: 1500mm, swing over bed: 420mm, spindle bore: 57mm, speed range: 38–2000/min, main drive: 7.5kW, weight: 2t. Equipment: 3-jaw chuck, tailstock, steady rest, quick-change tool holder, coolant system, lighting, year of manufacture: approx. 1980–1985. No data sheet, fully functional, well maintained, ready for immediate use. Only slight oil moisture in the lower area due to age, without relevant oil loss. An on-site inspection is possible.
turning diameter: 555 mm turning length: 3000 mm control: Monforts Control System type: MTC-K CCUO turning diameter over slide rest: 290 mm cross movement: . mm spindle passage: . mm turning speeds: 1600 U/min transmission ratio: . quill stroke: . mm rapid traverse: . m/min main drive motor: . kW 3-jaw chuck: Rotha-S Plus 3-jaw-chuck diameter: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are ...
The following used CNC vertical lathe EMAG VL2 is for sale. Manufacturer: EMAG Type: VL2 Year of Make: 2014 Weight: 6000 kg Description: It is a reliable EMAG VL2 CNC vertical lathe, ideal for precision machining of small and medium-sized parts. The machine is in good technical condition, has been regularly serviced and is ready for immediate use. The machine is suitable for both one-off and series production.
Universal lathe, little used Model: SN 710S x 1500 Make TRENS SK Accessories: Digital Display 4 Jaws Face Plate Coolant tank
Manufacturer: Pinacho Model: Smart Turn 6/180 Power: 7.5 kW Frequency: 50 Hz Control: FANUC CAPACITY • Center height: 180 mm • Center width: 750–1000 mm • Permissible diameter over bed: 360 mm • Permissible diameter over longitudinal slide: 335 mm • Permissible diameter over cross slide: 198 mm • Bed width: 250 mm SPINDLE • Spindle bore: 42 mm • Spindle nose: CAMLOCK no. 5 (DIN 55027 no. 5) • Spindle taper: Morse taper no. 4 • Number of spindle speeds: 1 • Cutting speed (constant surface speed): 0–4000 U/min FEED • Working feed Z,X (mm/min): 0–10000 mm/min • Rapid traverse Z,X (m/min): 10 m/min TAILSTOCK • Tailstock quill diameter: 58 mm • Tailstock quill travel: 200 mm • Tailstock taper: Morse taper no. 3 MOTORS • Main motor power: 5.5 kW • Feed force longitudinal (N): 4500 N • Feed force cross (N): 3500 N • Cool ...
Inv. Num. : 8761 Type: VDF Producer: Heidenreich & Harbeck Generated: Parameters: Maximum turning length: 1500 mm Equipment: Digital measurement
turning diameter: 890 mm turning length: 3000 mm turning diameter over slide rest: 550 mm control: Fagor 8055i ATC Revolver: 8 tail stock: MK 6 turning dia. in gap: 1220 mm length of gap: 450 mm spindle passage: 106 mm turning speeds: 15-1480 U/min 3-jaw chuck: 400 mm steady: 300 mm chip conveyor: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was creat ...
turning diameter: 475 mm turning length: 1500 mm control: Fagor 8055T Revolver: 8 turning diameter over slide: 240 mm turning dia. in gap: 710 mm length of gap: 350 mm spindle passage: 51 mm turning speeds: 100-4500 U/min Power: 7/11 KW 3-jaw chuck: 250 mm steady: 230 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the softw ...
turning diameter over bed: 600 mm turning diameter over slide rest: 400 mm turning length: 2000 mm hollow: 82 mm turning diameter: 600 mm turning dia. in gap: 800 mm length of gap: 400 mm turning speeds: 2000 U/min 3-jaw chuck: 250 mm steady: 210 mm with live steady: 200 mm Holder Multifix: coolant: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was cr ...
Conventional precision lathe WEILER "CONDOR VC" With 3 axis digital display Siemens Year of Make: 2012 Spindle bore: 56 mm Center width: 800 mm Circumference Ø over bed : 205 mm Speed range: 30 – 3500 rpm With the following accessories: Multifix Tool Holder Chip backsplash wall with interior lighting Coolant Setup 3 jaw chuck 0 200 mm Feed protection Moving Lynette 0 approx. 150 mm Tailstock with extendable drill quill Operating instructions
Key data: 900 mm, 5000 mm
Sony Digital read out 2 axis Taper Turning attachment Steady rest 4 pcs 3 jaw chuck selfcentering 4 jaw chuck independent Coolant system
Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible.
A mint-condition 2-axis precision lathe Knuth is available. Turning diameter over bed/support/without bridge: 800mm/570mm/1035mm, max. workpiece length: 1500mm, bed width: 400mm, travel X/Y: 420mm/230mm, top slide swivel range: 70°, speed: 1600rpm, spindle bore: 105mm, rapid traverse X/Z: 2m/4m/min, quill diameter: 90mm, quill stroke: 235mm. Machine dimensions X/Y/Z: approx. 3250mm/1150mm/1950mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible.
Lathe SARO SP 1250x3000, working condition
turning diameter: 1600 mm turning length: 6200 mm control: Siemens type: Sinumerik turning diameter over slide rest: 1300 mm transmission ratio: . 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 630 mm bed width: 750 mm live tooling: steady: 1200 mm steady: 670 mm steady: 408 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your busines ...
turning diameter over bed: 1200 mm turning diameter over slide rest: . mm turning length: 5000 mm digital readout: Digitalanzeige centre height: 600 mm : 55 PS spindle turning speed range: 5-1000 U/min Rapid movement: längs 4000 mm/min accessories:: Futter, Planscheibe accessories:: Stahlhalter, Lynetten Weight without Lynette: zwischen Spitzen 8000 kg Weight with Lynette: zwischen Spitzen 11500 kg Rapid movement: quer 2000 mm/min total power requirement: kW weight of the machine ca.: ca. 20 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling ...
SEDIN 1512 vertical lathe YOM 1987 Table diameter 1120 mm Max. turning diameter 1250 mm Max. workpiece height 1000 mm Max. workpiece weight: - 3200 mm (5…80 rpm) - 1000 mm (250 rpm) Main motor power 30 kW Installed power 37 kW Dimensions L/W/H 2750/2975/4100 mm Weight 16000 kg
Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible.
A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible.
CONTROLS conventional BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 20 mm bar diameter (max): 20 mm worpiece length max.: 100 mm MAIN SPINDLE spindle revolutions (min): 214 /min spindle revolutions (max): 5168 /min number of gears: 81 drive power: 11 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 6000 mm space requirements -front/back-: 2000 mm total weight approx.: 5600 kg Technical Data - Max. diameter of hexagonal rods: 17 mm - Max. diameter of square rods: 14 mm - Max. stroke of sidecars: 42 mm - Forward and backward movement of sidecars: +/- 8 mm - Max. stroke of axial carriages: 50 mm - Forward and backward offset of axial ca
CONTROLS conventional BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 20 mm bar diameter (max): 20 mm MAIN SPINDLE spindle revolutions (max): 5168 /min ELECTRICAL SPECIFICATIONS total power consumption: 11 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 5680 mm space requirements -front/back-: 1400 mm total weight approx.: 5000 kg tech. details: - max diameter hexagonal bars 17 mm - max diameter square bars 14 mm - max advancement bars 100 mm - max stroke axial carriages 50 mm - Offset of axial carriages forwards and backwards +/- 8 mm - Max stroke tool holder spindles 86 mm - Offset of tool spindles forward and backward +/- 11 mm - max stroke of the guide block 50 mm - Axial offset of the guide block 160 mm
CONTROLS PLC SIEMENS BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 32 mm bar diameter (max): 32 mm
CONTROLS conventional BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 20 mm bar diameter (max): 20 mm worpiece length max.: 100 mm MAIN SPINDLE spindle revolutions (min): 214 /min spindle revolutions (max): 5168 /min number of gears: 81 drive power: 11 kW X/Z SLIDE number of tool positions (total): 12 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 6000 mm space requirements -front/back-: 2000 mm total weight approx.: 5600 kg Technical Data - Max. diameter of hexagonal rods: 17 mm - Max. diameter of square rods: 14 mm - Max. stroke of sidecars: 42 mm - Forward and backward movement of sidecars: +/- 8 mm - Max. stroke of axial carriages: 50 mm - Forward and backward offset of axial ca
CONTROLS electronic controls SIEMENS BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 32 mm bar diameter (max): 32 mm worpiece length max.: 125 mm MAIN SPINDLE spindle revolutions (min): 260 /min spindle revolutions (max): 3080 /min number of gears: 2 ELECTRICAL SPECIFICATIONS total power consumption: 14 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 5750 mm space requirements -front/back-: 1300 mm total weight approx.: 8200 kg Machine completely overhauled and NEW (still in packaging) Technical Data - Max. hexagonal bar diameter: 28 mm - Max. square bar diameter: 22 mm - Max. longitudinal slide stroke: 125 mm - Extraction thread up to approx. M20 - Number of speeds: 17 - Number of tool stations: 12
CONTROLS electronic controls SIEMENS BASIC FUNCTIONS number of spindles: 6 WORKING RANGE TURNING turning diameter (max): 32 mm bar diameter (max): 32 mm worpiece length max.: 125 mm MAIN SPINDLE spindle revolutions (min): 260 /min spindle revolutions (max): 3080 /min ELECTRICAL SPECIFICATIONS total power consumption: 14 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 5750 mm space requirements -front/back-: 1300 mm total weight approx.: 8200 kg tech. details: - max. diameter hexagonal bars 28 mm - max. diameter square bars 22 mm - max advancement bars 175 mm - max length shooting 100 mm - max stroke longitudinal carriages 125 mm - Trigger thread head up to approx. M20 - Number of tool stations 12
turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm digital readout: ja weight: 4,4 t rapid traverse: ja m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1010 mm turning length: 6000 mm control: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mm bed width: 750 mm steady: 820 mm Rotating speeds: 1100 U/min length of gap: 500 mm steady: 450 mm spindle passage: 104 mm workpiece weight: 7000 kg main drive: 52 kW turning speeds: 5-900 U/min total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessorie ...
turning diameter: 1010 mm turning length: 6000 mm control: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mm bed width: 750 mm steady: 450 mm Rotating speeds: 1100 U/min length of gap: 500 mm steady: 450 mm spindle passage: 104 mm workpiece weight: 7000 kg main drive: 52 kW turning speeds: 5-900 U/min live tooling: total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items ...
Manufacturer: INDEX Model: V200 Year of Manufacture: 2001 Type of Machine : Automatic lathe with workpiece loader from Schmid Electrical Specifications: Power Supply: 3 Phase Frequency: 50 Hz Rated Voltage: 400 V Control Voltage: 24 V Rated Current: 66 A Power Rating: Rated Power: 31 kW Weight: Control Cabinet Weight: 440 kg Machine Weight: 3,300 kg Find more here - / Contact us at -
Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement.
Description Labor-E 275 Details Type 275 Year of manufacture 1997 Machine no. 9711848 FAGOR CNC 850T control Tip height above bed 275 mm Center width 3,000 mm Footprint 5,050 x 1,800 x 1,430 mm Circumferential diameter over bed 550 mm Circumferential diameter over carriage 340 mm Spindle nose 8" Spindle bore 103 mm Main spindle motor 11.5 kW Z-axis motor 1.4 kW X-axis motor 0.7 kW Quill feed 220 mm Quill diameter 100 mm incl. documentation SPECIAL PRICE
General Manufacturer: Citizen Type: Cincom R 07 VI Year of Make: 2012 Control: Citizen Cincom Number of axles: 6 Turning diameter: 7 mm Turning length: 40 mm Thread diameter: 4 m Spindle passage: 12 mm Spindle Speed: 0 – 16,000 rpm Spindle power: 1.1 kW Sub-spindle Speed: 0 – 10,000 rpm Pick-up length: 40 mm C-axis: 1° Tapping diameter: 3 m Tool Carrier Quantity: 2 Number of stations: 13 Turning tools: 5 Drilling tools: 4 Tool shank cross-section: 8 mm Counter-processing Number of tools: 4 Drive Connection 50 Hz 3x: 400 Volts Sub-spindle power: 0.5 kW Total power requirement: 4 kVA Dimensions and weight Dimensions: 1,465 mm x 560 mm x 1,410 mm Weight: approx. 950 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Pneumatic workpiece extraction LNS Tryton 112 Rother mini ...
Center height: 180mm, swing diameter over bed/cross slide: 360mm/190mm, distance between centers: 750mm, speed: 1250rpm, machine dimensions X/Y/Z: approx. 2800mm/1000mm/1300mm, weight: approx. 1750kg. An on-site inspection is possible.
Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T
A conventional lead and feed screw lathe Weiler without safety components (e.g. spindle guard) is available. Center distance: 800mm, center height: 155mm, spindle bore: 38mm, swing diameter over bed/bed slide/cross slide: 330mm/290mm/170mm, max. workpiece weight: 100kg, spindle taper: MK5. Faceplate diameter: 300mm, chuck diameter: 165mm, speed: 2800rpm, quill stroke: 110mm, quill diameter: 50mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1300mm, weight: approx. 1050kg. On-site inspection is possible.
Manufacturer: INDEX Model: MS42C Year of Manufacture: 1998 ( Machine 1 ) 2002 (machine2 ) Machine 1 : Power supply: 3-phase / 50 Hz Rated voltage: 400 V Control voltage: 24 V Rated current: 125 A Rated power: 69 kW Electrical cabinet weight: 1500 kg Machine weight: 11000 kg Machine 2 : Power supply: 3-phase / 50 Hz Rated voltage: 400 V Control voltage: 24 V Rated current: 100 A Rated power: 72 kW Electrical cabinet weight: 1500 kg Machine weight: 11000 kg Working area Maximum bar diameter (bar feed, external): 42 mm Bar feed positions: spindle positions no. 1, 3, 4, 6 Spindle circle diameter: 320 mm Main spindle (turning spindle) Clamping system: Power clamping with INDEX spring-loaded hollow clamping cylinder and draw tube Maximum clamping stroke: 4 mm Clamping force: 26 kN Drives Main spindle drive (per spindle): Motor type: Variable-speed hollow-shaft A ...
An untested conventional turret lathe WMW with extensive accessories is available. Machine dimensions X/Y/Z: approx. 2500mm/1600mm/1200mm, weight: approx. 2000kg. An on-site inspection is possible.
turning diameter over bed: 1100 mm turning diameter over slide rest: 740 mm turning length: 6000 mm spindle bore: 110 mm turning speeds: 16-1600 U/min digital readout: faceplate: mm 3-jaw chuck: steady: total power requirement: 22 kW weight of the machine ca.: 11 t dimensions of the machine ca.: m Year of manufacture 1999 Control: Siemens 840D Turning length (mm) 6000 Max. turning diameter (mm) 1100 Max. turning diameter over slide (mm) 740 Spindle diameter (mm) 105 Speed 16 - 1800 (18x) kW 22 Voltage 380V Hz 50 3-jaw chuck ø (mm) ¦ 4-jaw chuck ø (mm) ¦ Fixed steady rest ø (mm) 2x Through-spindle cooling ¦ Multifix tool post The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, ...
A conventional universal lathe Bulmak with gap bed (gap-bed lathe) is available. Center height: 210mm, turning diameter over bed/cross slide/in gap: 440mm/230mm/620mm, distance between centers: 1000mm, spindle speed: 2000rpm, bed width: 360mm, travel X/Z: 250mm/130mm. Machine dimensions X/Y/Z: approx. 3100mm/1300mm/1400mm, weight: approx. 2500kg. The machine is partially defective. On-site inspection is possible.
turning diameter over bed: 630 mm turning diameter over slide rest: . mm turning length: 3150 mm hollow: mm Number:: 16304188/ turning diameter: mm weight: 4,8 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two lead and feed screw lathes by Weiler are available. 1) Weiler Condor VS-2, distance between centers: 800mm, center height: 155mm, swing diameter over bed/cross slide: 330mm/160mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1900mm/900mm/1500mm. 2) Weiler Praktikant M, distance between centers: 650mm, center height: 160mm, swing diameter over bed/cross slide: 320mm/175mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/1700mm, weight: approx. 700kg. Both machines show isolated individual functional limitations, but are operational. Documentation available. On-site inspection is possible.
multifix: ja digital: ja centre distance: 1000 mm : 440 length: 2000 mm width: 1400 mm height: 1500 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical CNC Lathe Manufacturer: Okuma Type LVT300-M Year of manufacture 2005 Control OSP-E100L Turning diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm Travel X: 210 mm Travel Y: 330 mm C (pitch): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool positions in the turret: 12 Length of the feed belt: approx. 3,500 mm Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 Weight: 6,500 kg EQUIPMENT Turret can accommodate powered tools Feed belt 17 pallets There are still various steel holders and AGW s to purchase, these are not included in the scope of delivery. For more information, I am always available at 01778957069. Machine is in a used very good condition, no maintenance backlog, geometrically TOP
A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible.
Copyng lathe with 4 spindles BACCI mod. T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle - Year 1994
turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
