vertical lathe cnc used for sale

VERTICAL BAND SAWING MACHINE Inv. No. 12.895Z1 Make MÖSSNER Model SSF520 Wheel diameter 520 mm Table dimensions 750 x 800 mm Throad dept 510 mm Passage under upper guide 380 mm Cutting speeds Variables 18-160/240-2280 m/min Motor power 5.5 KW Net weight 1000 kg Max. thickness for fusion cutting 15 mm Including: Coolant Mushroom shaped emergency stop

VERTICAL MACHINING CENTRE Inv. No.13.107M1 Make MAZAK Model VTC-300C Control Mazatrol Fusion 640M X-travel 1740 mm Y-travel 760 mm Z-travel 660 mm Table size 2000 x 760 mm Spindle taper ISO 40 R.P.M. 40 – 12.000 kW 15/11 Volts 400 Cycles 50 Including: Machine cover Manuals Coolant tank Work light Chip conveyor

YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions

Mazak VTC 20 B Vertical Moving Post Center :::SPECIFICATIONS::: CNC Model: Mazatrol CNC Version: M plus Tool holder: ISO 40 Spindle speed: 6000 Number of tools: 24 X-axis stroke: 1120mm Y-axis stroke: 510mm Z-axis travel: 510mm Table size: 1040 x 510mm Table capacity: 800Kg Guides: roller High refrigerant pressure: yes

DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...

Leadwell MCV 610CR Vertical Machining Center :::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 0 - M Tool holder: ISO 40 Spindle speed: 6000 Number of tools: 24 X-axis stroke: 610mm Y-axis stroke: 410mm Z-axis travel: 510mm Rapid feeds for linear axes X Y Z: 20m/min Table size: 890 x 500mm Table capacity: 300Kg Machine equipment: Fourth axis table :::D DIMENSIONS AND WEIGHT::: Length: 2040mm Width: 2820mm Height: 2800mm

CNC VERTICAL MACHINING CENTRE Inv. No.13.017M1 Make EUMACH Model MC1300P Control Heidenhain 360 Serialnumber E3045 X-travel 1350 mm Y-travel 610 mm Z-travel 610+160 mm Table size 1500 x 700 mm Max loading weight 1500 kg Spindle taper ISO 50 R.P.M. 60 – 4500 Machine weight 9000 kg Dimensions 4400 x 3076 x 3000 mm kW 15 Volts 400 Cycles 50 Including: Automatic lubrication. Telescopic way covers. ATC 32 positions

MATSUURA MC 600 VF Vertical Machining Center YOM 1996 X axis 600 mm Y axes 410 mm Z axis 470 mm Working capacity 600 x 410 x 470 mm Tool changer 20 TC Table capacity 800 x 400 mm Table load 400 kg Spindle speed range 30- 8000 Rpm Spindle taper ISO 40 Spindle bore 80 mm Weight 4000 kg

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...

CNC Machining Center Vertical DECKEL-MAHO - DMC 63 V Built in 2002 in good condition. Control Heidenhain TNC 430 Heidenhain Hours: 10985 Specifications: Main spindle Speed range - main spindle 20 - 8,000 rpm Drive power - main spindle 13 / 9 kW Max. torque 83 / 57 Nm Tool holder SK 40 Workbench: Table clamping surface 800 x 500 mm max. table load 500 kg Installation height max. 240 mm Number of T-slots 5 T-slots - width 14 H12 mm T-slots - spacing 100 mm Distance between spindle nose and table 150 - 650 mm Feeds Feed rate X, Y, Z: 30,000 mm/min Rapid traverse ( X / Y / Z ) 30 m/min Tool changer: Tool changer 24 pos. max. tool diameter 80 mm max. toolthrough. with a free neighbor's box. 140 mm max. tool length 300 mm max. tool weight 7 kg Total power requirement 30 kVA Machine weight approx. 4 t Space requirement approx. 4.0 x 3.5 x 2.7 m Accessor ...

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

GRP tank, suitcase tank, vertical, three-chamber tank with three domes and lids Water tank, upright Polyester tank with a volume of 10,000 L Dimensions: 1.40 m wide x 1.90 m deep x 4.35 m high

SECOND-HAND VERTICAL SANDER

This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine.

This 5-axis RÖDERS RXU 1001 DSH was manufactured in 2016. It features a machining range of 800 mm × 855 mm × 500 mm and a maximum workpiece weight of 800 kg. The machine is equipped with a milling spindle that operates at 24,000 rpm and includes a tool changer for 24 tools. If you are looking to get high-quality machining capabilities, consider the RÖDERS RXU 1001 DSH vertical machining centre we have for sale. Contact us for further details.

This 3-axis RÖDERS RHP 500 vertical machining centre was manufactured in 2007. It features a machining range of 500 mm × 552 mm × 300 mm and a table size of 600 mm × 540 mm. The machine is equipped with a milling spindle that reaches up to 42,000 rpm and has a tool changer with 42 places. If you are looking to get high-quality machining capabilities, consider the RÖDERS RHP 500 machine we have for sale. Contact us for further details.

SECOND-HAND VERTICAL SANDER WITH 2 BELTS OMA MOD. UNICA - transversal sanding on two sides of straight or shaped / curved elements - n. 2 motors for abrasive belts 7.5 hp each - n. 2 abrasive belts 3700x90 mm - Automatic feeding 4-20 m / min - minimum working length 320 mm - Max. piece height 130 mm - CE year 2001

Inv. Num. : 3505 Type: AJV-25/404 Producer: MAZAK Generated: Parameters: Control system: MAZATROL M-32 Work table length: 1240 mm Work table width: 550 mm Maximum table load (even): 800 kg Spindle drive power: 15 kW Minimum vertical spindle speed: 28 1/min Maximum vertical spindle speed: 4000 1/min Mechanical feed length axis X: 1000 mm Mechanical feed length axis Y: 508 mm Mechanical feed length axis Z: 460 mm Cone: ISO 40 Number of tools: 30 pieces Maximum tool diameter: 100 - 150 mm Max. tool weight: 8 kg Distance between uprights: 650 mm Accuracy: 0.02 mm Machine height: 3026 mm Machine length: 3810 mm Machine width: 2590 mm Machine weight: 8.1 t

SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm

Key data: 1200 mm, 400 mm, 425 mm

Inv. Num. : 4455 Type: FZ 16L Producer: CHIRON Created: 1987 Parameters: Control system: Siemens Sinumerik System 3 Work table length: 1880 mm Work table width: 475 mm Mechanical feed length axis X: 1200 mm Mechanical feed length axis Y: 400 mm Mechanical feed length axis Z: 425 mm Machine height: 4000 mm Machine length: 2400 mm Machine width: 2800 mm Machine weight: 3500 kg

Nv. Num. : 7401 Type: QM-40 SA Producer: Feller Created: 2007 Parameters: Control system: FANUC Maximum spindle speed: 20,000 1/min Number of axles: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of stacking positions: 24 pieces Machine weight: 6300 kg Equipment: BLUM 3D Workpiece Probe 2022/11: GO Interchangeable Arms Spindle change 2021: Installation of the BLUM workpiece probe 2020: Replacement of drive bearings and bolts on X/Y beams Replacement of caliper lubrication dispensers, new brake caliper covers Replacement of the spindle center cooling reducer

x-travel: 600 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc type: Serie 0-MD mm Tool changer: 16 Pos. spindle taper: ISO: 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.

Key data: 510 mm, 510 mm, 510 mm

Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder

Hassia Redatron FlexiBag 40/25 vertical form, fill & seal machine for pouches with auger dosing, bag size min. 60 x 50 mm (LxW), max. 400 x 260 mm (LxW), filling volume max. 4.4 litre, max. width of the foil reel 540 mm, maximum diameter of the foil reel 600 mm, electrics 3X230/400 V/50 Hz, capacity up to 150 cycles per minute

Key data: 1050 mm, 530 mm, 510 mm

Control Mazatrol ... MATRIX 2 Clamping table surface ... 1300x550mm Axis X ... 1050mm Axis Y ... 530mm Axis Z ... 510mm Spindle speed... 10-12000r/min. controlled axes ... 3 cooling... 15bar ISO 40 Max. table load ... 1200kg Magazine slots ... 30 Machine weight ... 7700kg The machine is in good condition, possible to test under electricity.

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

standing PE tank, sulfuric acid tank. Flat bottom Volume: 16.7 m³ Dimensions: Ø 2.57 m x 3.90 m high

standing GRP tank, polyester tank, with feet Volume: 35 m³ Dimensions: Ø 3.00 m x 5 m high

upright GRP tank, polyester tank, with bottle bottom, with two domes (on top of the tank and on the side of the spout) Volume: 40 m³ Dimensions: Ø 2.90 m x 6 m high

upright stainless steel tank with flat bottom Weight: 3 tons Volume: 43.5 m³ Dimensions: Ø 3.10 m × 6.15 m high

GRP tank standing on the skirt, polyester tank, reinforced, with inner coating with cone at the bottom, possible density: 1.3 kg /l Volume: 30 m³ Dimensions: Ø 2.85 m x 8 m high incl. skirt cylindrical length: 4.70 m

upright stainless steel tank, flat bottom Volume: 15 m³ Dimensions: Ø 2.60 m × 3.40 m high

upright stainless steel tank, incl. agitator Volume: 6 m³ Dimensions: Ø 2.24 m × 2.80 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank Volume: 6 m³ Dimensions: Ø 2.40 m × 1.90 m high

upright stainless steel tank, incl. agitator Volume: 3.3 m³ Dimensions: Ø 1.66 m × 2.50 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³

upright stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Outlet under the tank with flange Ø 4.5 cm Outlet at the bottom of the floor Ø 6.5 cm, without tap

Stainless steel tank, upright, cube Volume: 1 m³ Dimensions: 1.0 m wide × 1.2 m long × 1.60 m high

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

Simultaneous 5-axis design - Control system SIEMENS 840 D SL - Working range X= 780, Y= 600, Z= 520 mm - C-axis 360° - B-axis -50°/+110° - Table clamping surface 720 x 540 mm - Spindle speed 20 - 15,000 1/min - Tool magazine 60 places - Tool holder HSK 63A - High-pressure system IKZ 40 bar - Probe 3D Weight 8,100 kg

Inv. Num. : 7531 Type: VMC 750 Producer: MAS Created: 2000 Parameters: Control system: VICKERS ACRAMATIC A2100 Work table length: 1000 mm Work table width: 500 mm X-axis travel: 750 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Machine weight: 4000 kg Equipment: Technical Documentation

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

GRP tank, upright Volume: 23,000 l Dimensions: Ø 2.00 m × 7.50 m high Spout: DN80

Conventional Vertical Lathe O-M TMS2-18/40 Made in 1975. Table size: 1800mm Max swing: 4000mm Max turning height: 1500mm Condition Under power.

Key data: 900 mm, 500 mm, 450 mm

Inv. Num. : 7549 Type: F5 Produzent: MAKINO Erzeugt: 2013 Parametern: Steuerungssystem: FANUC Arbeitstischlänge: 1000 mm Arbeitstischbreite: 500 mm Anzahl der Stapelpositionen: 30 Stücke Anzahl der Achsen: 4 Stücke Maximale Vertikalspindeldrehzahl: 20.000 1/min Verfahrwege X-Achse: 900 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 450 mm Kegel: HSK 63 F Anzahl aller Werkzeuge: 30 Stücke Ausstattung: IKZ Werkzeughalter

Inv. Num. : 7562 Type: VF2 Produzent: HAAS Erzeugt: 2006 Parametern: Steuerungssystem: HAAS AUTOMATION Arbeitstischlänge: 914 mm Arbeitstischbreite: 356 mm Maximale Tischbelastung (gleichmäßig): 1361 kg Verfahrwege X-Achse: 762 mm Verfahrwege Y-Achse: 406 mm Verfahrwege Z-Achse: 508 mm Spindelleistung: 22.4 kW Maschinengewicht: 3539 kg

Key data: 5000 mm, 1600 mm

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Key data: 1020 mm, 610 mm, 610 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1200x600mm Axis X ... 1020mm Axis Y ... 610mm Axis Z ... 610mm Spindle speed ... 10-12000 rpm Controlled axes... 3 cooling ... 20bar SK 40 Max. workpiece weight ... 500kg Main engine power ... 22kW Rapid traverse ... 40,40,36m/min Magazine spaces ... 30 Machine weight ... 6970kg L x W x H ... 2920x2820x2860mm The machine is in good condition, possible to test under power.