We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,312 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
There are three EMAG VCS 200 available, connected load: 36kW, without tools, with documentation, were maintained regularly.
used
X-travel: 400mm, z-travel: 200mm, swing: 210mm, max. rotational speed: 5000/min, controls: FANUC, with handling, machine needs overhauling.
used
X-travel: 200mm, z-travel: 400mm, W-travel: 670mm, swing diameter over slide: 300mm, center distance: 600mm, max. turning length: 350mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 6t, with documentation.
used
X-travel: 200mm, z-travel: 650mm, W-travel: 750mm, swing diameter over slide: 265mm, center distance: 650mm, max. turning length: 650mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 7.2t, with documentation.
used
X-travel: +/-2750mm, z-travel: 2000mm, B-travel: +/-90°, C-travel: 360°, table diameter: 4500mm, turning and circumferential diameter: 5000mm, max. turning height: 2645mm, rotational speed: 8-3000/min, controls: Siemens SINUMERIK 840D, with documentation, base, stand, crossbar, support and chisel pusher.
used
There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation.
used
Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible.
used
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024.
used
A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible.
used
A single-spindle pick-up lathe is available, max. swivel diameter: 250mm, working spindle nose: ASA 6 inch, spindle in front bearing: 110mm, max. chuck diameter: 250mm, weight: 13t, operating hours: approx. 82,400h, with documentation, an on-site inspection is possible.
used
chucking diameter: 250 mm swing diameter: 260 mm travel -x axis: 570 mm travel -z axis: 200 mm control: FANUC 18 i-T Turning speeds mainspindle: 4500 U/min numbers of positions in the tool changer: 12 Dimensions (L x W x H): 3.700 x 1.500 x 2.400 mm weight of the machine: 6.500 kg main drive motor: 15 kW turret 12 station: VDI 40 machine is equipped with a closed standard autom. loader: for 12 workpieces 80 mm-220 mm for 14 workpieces 30 mm-160 mm for 28 workpieces 30 mm-85 mm max. total load 120 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table diameter, mm 4500 Max. work piece diameter, mm 5000 Max. work piece height, mm 2500 Max. work piece weight, kg 63000 Chuck speed, rpm 0,34 ... 31 Main electric motor power, kW 125 Machine overall dimensions, mm 6600 x 11400 x 8400 Machine weight, kg app. 140500
used
chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300
used
TOS SKJ 12 vertical lathe The machine is technically efficient after replacing the transformer from the table rotation, worn out, requires inspection and feed adjustment Year of manufacture 1987 Documentation in Czech electrical cabinet dmensions 1630x590 mm, weight 675 kg
used
Chuck dia. 2250 mm Max turning dia -- passage 2500 mm Max hight of workpiece Z-axis 1600 mm Vertical caliper max horizontal travel: 1390 mm max vertical travel: 1200 mm Crossbar max travel: 1240 mm Completely renovated in 2012 Heidenhain measuring bars and NC Siemens 855 control
used
Maximum machining diameters: 4000 mm / 3500 mm (clamping plate) Clamping plate speed: max. 80 rpm Maximum workpiece height: 2000 mm Main drive power: 55 Kw Note grinding equipment Maximum workpiece weight: 40t Regular service and maintenance
used
Vertical working stroke 435 mm Horizontal X working stroke 520 mm Recirculating ball screws diameter 40 mm Ball screw pitch 8 mm Axis movement motors 12 Newtons On-axis reading system with optional ballscrews optical scales CNC Fanuc Maximum lathe diameter 250 mm Max. put diameter 250 mm Spindle Asa 6 Max. electro spindle power 22 kW Maximum speed 6000 Rpm Maximum torque 119 nm
used
The chuck is self-centering with 6 jaws and has a diameter of 1000 mm with the possibility of processing pieces up to a size of 1400 mm. The total electrical absorption of the lathe is approximately 130 A and includes: • spindle motor • x and z axis motors • head lubrication pump motors • refrigerant pump motor • hydraulic central pump motor • crosshead motor The CNC on the machine is FAGOR. Electrical diagrams and machine use and maintenance manuals are available
used
Webster & Bennett 36” Fixed Rail vertical borer Table Diameter 36 ” with a set of standard jaws Max swing 46 ” gripped on the inside Max height under cross rail 23” Travel of ram 22” Cross travel 23” from centre and will travel 2” past centre Table speeds 185 to 400 RPM ( 12 ) Feeds 0.005” to 0.250” per rev ( 12 ) 25 HP main motor Volt 440
used
Year of construction 2008 Vertical lathe type Working range 760 mm for two mandarins Spindle motor power 30 37 kW Asa 11 spindle connection Spindle revolutions 25 1500 Turret with 12 positions on each side FANUC numerical control Machine weight 23,500 kg Year 2008
used
The machine is in good technical condition, testing possible upon agreement. Clamping plate diameter: 1000 mm Max. diameter of peripheral turning: 1150 mm Max. workpiece height: 900 mm Performance of the main engine: 40 kW Machine weight: 12,000 kg
used
Total machine input:: 83 kW Clamping plate diameter: 2400 mm Max. workpiece diameter: 2600 mm Max. workpiece height: 1600 mm Max. workpiece weight: 15000 kg
used
The SK 125 carousel is in good technical condition. Can be seen by appointment. Machine weight: 556000 kg Total machine input:: 686 kW Clamping plate diameter: 125 mm Max. workpiece height: 4000 mm Max. workpiece weight: 120 kg Clamping plate speed: 0.35-14 rpm The largest av. lathe. cross and side support.: 12500 mm Avg. clamping plates:: 8000 mm The greatest distance between clamps. plate and knife. side holder support :: 4200 mm Machine dimensions lxwxh: required area 20000x20000x12000 mm
used
This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year.
used
This EMAG VL3 Vertical Lathe was manufactured in the year 2001. It is equipped with a Fanuc Series 18i-T control unit. The machine was refurbished completely in 2022 to have equivalent condition as new machine. See all details of overhaul in attached PDF.
used
Description: X-axis Storke 268 mm Y-axis Stroke 488 mm 12-station Turret TRANSPORT DIMENSIONS: Machine body: 1460x2600x2900 mm Evacuator: 2700x1600x1600 mm Transformer: 550x400x600 mm A LOW-BOY TRAILER IS REQUIRED FOR TRANSPORT turning height: 460 mm, swing diameter: 496 mm, control: FANUC i-Series, turning speed range: 3,000 rpm, feed range: 20 mm/min, total power requirement: 18.5/22 kW, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 3,200 mm
used
Description: X-axis Storke 268 mm Y-axis Stroke 488 mm 12-station Turret TRANSPORT DIMENSIONS: Machine body: 1460x2600x2900 mm Evacuator: 2700x1600x1600 mm Transformer: 550x400x600 mm A LOW-BOY TRAILER IS REQUIRED FOR TRANSPORT turning height: 460 mm, swing diameter: 496 mm, control: FANUC i-Series, turning speed range: 3,000 rpm, feed range: 20 mm/min, total power requirement: 18.5/22 kW, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 3,200 mm
used
Description: Face plate diameter 1800 mm weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 4,000 x 4,600 mm
used
Description: Turning diameter 450 mm x-axis 330 mm z-axis 650 mm Tailstock stroke 880 mm Spindle bearing diameter 150 mm Spindle speed max. 5,000 rpm Tool speeds 12,000 rpm Rated current 102 A Description: Equipment see attached list Cooling unit Chip conveyor IFS room air filter type IFM 2000 control: SINUMERIK 840 D, turning speed range: 5.000 rpm, total power requirement: 42 kW, weight approx.: 22,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 3,800 x 3,100 mm
used
Description: EMAG VTC 250 with automation C-axis, driven tools with automation (tool assemblies) 250mm machining weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,600 x 3,200 mm
used
Description: Table diameter: 2,500mm Max turining diameter: 3,000mm Max swing: 3,500mm Load on table: 25 ton Table speed: 37.5-130 rpm (2 steps) Table motor: 37/45kw XZW: -200~+2,700 x 1,200 x 1,100mm Ram size: 240 x 240mm 12 tool ATC Chip conveyor Includes shipping to any major seaport in the world. turning height: 2,500 mm, control: Fanuc 31iA, turning speed range: 37.5 - 130 rpm, total power requirement: 37/45 kW, weight approx.: 70,000 kg, Approx. Onsite Dimension. (l x w x h): 11,100 x 8,800 x 8,000 mm
used
Description: Dörries single-column vertical lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Machine number Control: SIEMENS Sinumerik 840 D Machine number: ,V-800292 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 ...
used
Description: Dörries single-column vertical lathe with 2.4 m swing diameter and hydraulic clamping table. Control and machine number SIEMENS Sinumerik 840 D control system Machine number: V-800289 Geometric main dimensions Machine table diameter: 2000 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2445 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Cross beam support Travelling distance: ± 1350 mm Crossbeam travel: 1000 mm (100 mm steps) Crossbeam travel (100 mm steps): 1000 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm/min Milling drive Milling drive power: 37 k ...
used
Description: Dörries Single-column Vertical Lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Serial number Control: SIEMENS Sinumerik 840 D Serial number: ,V-800288 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm ...
used
Description: Dörries single-column vertical lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Machine number Control system: SIEMENS Sinumerik 840 D Machine number: V-800291 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 40 ...
used
Description: Dörries VCE 2800 SM F Single-column Vertical Lathe with 2.8 m swing diameter. Control system SIEMENS Sinumerik 840 D Geometric main dimensions Swing diameter: 2800 Basic turning height with fixed crossbeam: 1335 Turning height including adjustment of the grid steps: 1935 mm Cross-section of chisel slide: 250 x 250 mm , Travelling distance of chisel slide: 1100 mm Fixed Crossbar Machine table Machine table diameter: 2500 mm Maximum table load: 25 tonnes Drive power main drive: 80kW Torque on machine table: 35900 Nm Speed range in 2 gear stages: up to 224 rpm Feed drives and Cutting forces Horizontal and vertical crossbeam support: 0 - 18000 mm/min Cutting force when turning: 19000 N Tool system Vertical 4-fold Capto C6 turret Please have a look at the technical data and the layout plans in the PDF file. turning height: 1,935 mm, swing di ...
used
Description: Dörries single-column vertical lathe with 2.4 m swing diameter. Control and machine number SIEMENS Sinumerik 840 D control system Machine number: V-800290 Geometric main dimensions Machine table diameter: 2000 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2445 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Crossbeam travel (100 mm steps): 1000 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm/min Milling drive Milling drive power: 37 kW Speed range in 2 gear stag ...
used
Description: XZ travel: 580/1000mm 32” hyd. chuck Manual tool presetter Chip conveyor Includes shipping to any major seaport in the world. turning height: 1,000 mm, swing diameter: 1,100 mm, control: Fanuc, turning speed range: 800 rpm, total power requirement: 45/55 kW, weight approx.: 22,000 kg, Approx. Onsite Dimension. (l x w x h): 2,830 x 3,305 x 4,012 mm
new
faceplate diameter:5700 mm swing diameter:6300 mm turning height:4000 mm total power requirement:DC 110 kW workpiece weight max.:100 t table speeds:0.2 ~ 20 U/min Torque:des Tisches 300 kN.m slide stroke:vertikal: 2000 mm ram diameter:280 mm rapid traverse:2000 mm/min control:CNC Siemens oder Fanuc _ head swivability:-15°?+30 ° weight of the machine ca.:127 t Rams:2 New CNC Vertical Turret Lathe - Double Column with Siemens 828D or Fanuc 0i TF and extensive accessories. Further technical details and accessories appearing in Appendix.
used
faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.
new
faceplate diameter:7100 mm swing diameter:8000 mm turning height:5000 mm total power requirement:DC 132 kW workpiece weight max.:180 t table speeds:0.2 ~ 20 U/min Torque:des Tisches 300 kN.m slide stroke:vertikal: 2500 mm ram diameter:320 mm rapid traverse:2000 mm/min control:CNC Siemens oder Fanuc _ head swivability:-15°~+30 ° weight of the machine ca.:127 t Rams:2 New CNC Vertical Turret Lathe - Double Column with Siemens 828D or Fanuc 0i TF and extensive accessories. Further technical details and accessories appearing in Appendix.
new
faceplate diameter:1000 mm swing diameter:1350 mm turning height:1070 mm total power requirement:75 kva weight of the machine ca.:25 t dimensions of the machine ca.:5,3x4,6x5,5 m Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer
new
:KDM-12 | KDM-16 | KDM-20 | KDM-23 faceplate diameter:1000|1400|1800|2000 mm swing diameter:1250|1600|2000|2300 mm turning height:1000 (opt. 1400)|1000 (opt. 1400)|1250 (opt. 1650)|1250 (opt. 1650) mm table speeds:5 - 200 (2-360 opt.)|5 - 160 (2 - 300 opt.)|3,2 - 100 (2-200 opt.)|3,2 - 100 (2-180 opt.) 1/min transmission ratio:4 (variabel in jeder Stufe) max. workpiece weight:4|6|8|10 t max. torque on the faceplate:20|25|25|25 KN rapid feed of tool post:8000|3000|3000|3000 mm/min feed speeds:0.1 - 500 mm/min Max. cutting force of tool head :18|25|30|30 KNm Travel of Ram (vertical):600|800 (1000 opt.)|800 (opt. 1000)|800 (opt. 1000) mm Travel of ram (horiz.):850|1000|1115|1400 mm Cross rail travel :600|850/1000 (optional)|890/1240 (optional)|990/1240 (optional) mm power maindrive:22/30|30/37|37/45|37/45 kW weight of the machine ca.:9|12,5|18,5|20,5 t Machine size (LxWxH):2360x2277x3403|26 ...
new
:KDM-K 12| KDM-K 16 | KDM-K 20 | KDM-K 23 | KDM-K 26 faceplate diameter:1000|1400|1800|2000|2300 mm swing diameter:1200|1600|2000|2300|2600 mm turning height:1000|1250|1400|1600|1500 mm table speeds:6,3- 200|5-160 | 3.2-100 | 5-160 | 2,5- 80 m/min transmission ratio:16 max. workpiece weight:3,2|5|8|8|8 t rapid feed of tool post:1800 mm/min feed speeds:0,8-86 mm/min in X-Achse Travel of Ram (vertical):650/700|800/1000|800/1000|800/1000/1300|1000/1380 mm Travel of ram (horiz.):630|915|1115|1250|1500 mm max. vertical adjustment of side-support:900|900|980|980 mm max. horizontal adjustment of side-support:630|630|500|500 mm Cross rail travel :850/1100|890/990/1240/1640|1240/1640 mm power maindrive:22|30|37|37 kW weight of the machine ca.:9|14|18|23|21 t Machine size (LxWxH):2299x2540x3403|2660x26603698|3135x3070x3910|3380x3360x4300|390 0x2950x4400 mm tool holder:5 fach :LED 4 jaw chuck:mit ...
new
:KDM-K 25 | KDM-K 28 | KDM-K 31 | KDM-K 35 faceplate diameter:2250|2830|3150|3500 mm swing diameter:2500|2800|3100|3500 mm turning height:1600/2000/2500 |2000/2500 |2000/2500 |2000/2500 mm max. torque on the faceplate:63000 Nm max. workpiece weight:10/16 t table speeds:0,5-80 |0,5-80 |2-63 |2-50 1/min Travel of Ram (vertical):1000/1250|1000/1250|1000/1250|1000/1250/1600 mm Travel of ram (horiz.):1400|1600|1700|1800 mm rapid traverse X-axis:3 m/min cross section of ram:200x255 mm rapid feed cross beam:350 mm/min power maindrive:55 kW Weight approx.:32/35/37|35/38/40|36/40/42|43/45 t face plate:siehe oben Rams:2 Stk. CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch
new
:KDM-K 40 | KDM-K 50 faceplate diameter:3150/3500|4000/4500 mm swing diameter:4000|5000 mm turning height:2500/3150/4000|2500/3150/4000 mm max. torque on the faceplate:100000 Nm max. workpiece weight:32/50/83 t table speeds:2 ? 40 1/min Travel of Ram (vertical):1300/1600/2000 mm Travel of ram (horiz.):2250 | 2800 mm rapid traverse X-axis:3|4 m/min cross section of ram:200x255 mm rapid feed cross beam:350 mm/min power maindrive:55|75 kW Weight approx.:58/75/115 |58/75/115 t face plate:siehe oben Rams:2 Stk. CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch
used
faceplate diameter:4700/5700 mm swing diameter:6300 mm turning height:3150/4000 mm workpiece weight:63/100 t table speeds:0.2-32 U/min (2 Stufen) max. torque:400 KNm slide stroke:vertikal: 1600/2000 mm slide stroke:horizontal: 3400 mm cross section of ram:240x240/280x280 mm Cross rail travel :2000 mm rapid feed cross beam:300 mm/min feed stepless:X-Achse: 1-500 mm/min main drive:90/110 kW weight of the machine ca.:110/170 t Machine size (LxWxH):9000x7000x8000 mm control:Siemens/Fanuc/Fagor worktool support (A-axis):2 Stück :1 Stück Rams:1 Stück konventioneller und 1 Stück CNC-Stößel CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side
new
faceplate diameter:6300 mm swing diameter:8000 mm turning height:4000 mm workpiece weight:120 t table speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nm slide stroke:vertikal: 2500 mm slide stroke:horizontal: 4350 mm cross section of ram:280x280 mm Max. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mm rapid feed cross beam:300 mm/min feed stepless:X-Achse: 1-500 mm/min main drive:110 kW weight of the machine ca.:190 t Machine size (LxWxH):11000x9000x8000 mm control:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück :1 Stück Rams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right ha ...
new
faceplate diameter:4000 mm swing diameter:5000 mm turning height:2500 mm max. turning diameter:5000 mm table load:40 t table rotation speed:0,1-80 (2-stufig) U/min max. torque on the faceplate:108000 Nm Travel of Ram (vertical):1800 mm Travel of ram (horiz.):-2500~+2900 (aus Tischmitte) mm ram head dimension:300x300 mm spindle speed:10-2500 (2-stufig) 1/min spindle taper:50 SK rapid power traverse in X-and Z direction:10/10 m/min feed speeds:1-3000 mm/min Cross rail travel :1680 mm Tool changer:12-fach für rechten Stößel (für Drehwerkzeuge) Tool changer:60-fach für linken Stößel (für Fräswerkzeuge) tool taper:SK50/BT50 Machine height:s. Anlage mm machine length:s. Anlage mm machine width:s. Anlage mm drive capacity - spindle motor:18,5/22 kW coolant pump drive:3 kW servo motor X-axis:9 kw servo motor Z-axis:9 kw table drive:100 kW :300 kva positioning accuracy:0,01/500 mm repeat ...
new
faceplate diameter:5000 mm swing diameter:5200 mm turning height:3000 mm max. turning diameter:5200 mm Travel of Ram (vertical):1500 mm Travel of ram (horiz.):+/- 2500 mm ram stroke speed:15000 mm/min cutting capacity:150000 Nm in X-/Z-Achse ram head dimension:400 x 400 mm CNC controller:Siemens/Fanuc/Fagor Rams:2 Stk. Scales:v. Heidenhain servo motors:Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fagor ATC:32/60/90 fach Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coo ...