vertical lathe cnc used for sale

The machine is in good technical condition, after prior agreement it is possible to test it. The machine has been out of operation for about a year. Regular branded service worth €5,000 (we can document it) was last performed at the end of 2023, after which the machine was in limited operation. It is necessary to determine the condition of the screws and repair it if necessary. It is necessary to calibrate the 5-axis indexer. The spindle makes a loud noise.

Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible.

CNC Turning and Milling Center Okuma LT 2000 EX -MY 2pcs Control: OSP-P300L Year of Make: 2013 Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travels: W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) 2 tool turrets with 16 places each (all places driven) Equipment: - Chip conveyors - Paper belt filter system with high-pressure pump - 2x 3-jaw chuck Kitagawa - OGL gantry loader with approx. 5 kg load capacity - Stacking magazine 20 places - Touchsetter - Renishaw touch probe - Extraction system - Various accessories

Key data: 65 mm, 660 mm

Control: SIEMENS Spindle passage: 65 mm Max. speed: 6,000 1/min Sub-spindle Z= 700 mm TOOL CARRIER 1 with milling spindle Milling spindle: 7,200 1/min B-axis 360° 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 230 / Y= +- 65 / Z= 845 TOOL CARRIER 2 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 140 / Y= +- 45 / Z= 810 Chip conveyor Filter Bar feeder INDEX MBL

CNC vertical machining center Type: DMU 80 T Manufacturer: Deckel Maho Year: 2003 Control: Heidenhain TNC 530 X: 810 mm Y: 650 mm Z: 650 mm Table: 1250 x 710 mm Magazine for 30 tools SK40 clamping and tools Internal cooling through the spindle center 40bar External emulsion tank with separator 600l. Max spindle speed 12000 rpm Ethernet interface for networking the machine Internal/external air pressure cooling New motherboard with SSD - the machine loads programs quickly and can use rapid traverse machining New spindle in 8/2023, from exchange 300 hours Find more here - / Contact us at -

CNC vertical machining center Type: DMU 80 T Manufacturer: Deckel Maho Year: 2002 Control: Heidenhain TNC 430 X: 900 mm Y: 650 mm Z: 600 mm Spindle speed: 8000 rpm Spindle taper: SK40 Tilting spindle, can be folded and used as a horizontal boring machine Table: 1100 x 650 mm Tool magazine: 24 positions Through spindle cooling 40 bar Chip conveyor Machine in good condition, under power Find more here - / Contact us at -

CNC vertical machining center Type: MCV 800 QUICK Manufacturer: MAS Year: 2018 Control: Heidenhain TNC 620 X: 800 mm Y: 500 mm Z: 550 mm Table: 1000 x 500 mm Max table load: 600 kg Spindle speed: 12000 rpm Spindle cone: ISO 40 Tool magazine: 24 positions Workpiece + tool probe Heidenhain TS/TT 460 Central automatic lubrication Cooling through the spindle center (20 Bar). Machine in good condition, under powet Find more here - / Contact us at -

CNC lathe Type: GA-360 LM Manufacturer: Goodway Year: 2005 Control: Fanuc Series Oi-TC Max turning diameter: 500 mm Max turning length: 1200 mm Clamping head: 100 mm Swing over bed: 700 mm Spindle bore: 75-105 mm Chuck size: 15" LM driven tools with milling function (C-axis) Driven tool motor: 7 hp Spindle motor: 30 hp Revolver head: 12 VDI 3-jaw chuck Chip conveyor Tailstock Machine in good condition, under power Find more here - / Contact us at -

Fiber laser cutting machine Type: G 3015 MF Manufacturer: Hans Year: 2018 CNC control: Hans 701 Pro Exchange tables 3 m x 1.5 m X: 3050 mm Y: 1530 mm Z: 250 mm Laser source: IPG 3000 W Laser type: Fiber Laser head: Precitec Machine weight: 8,000 kg Max. workpiece weight: 750 kg Sheet metal cutting thickness: steel 15 mm stainless steel 10 mm aluminum 6 mm brass 5 mm Machine in good condition, under power Find more here - / Contact us at -

MIKRON WF 3 DCM Universal Milling Machine Heidenhain TNC 151 control Table 800x380 mm x-travel 500 mm y-travel 500 mm z-travel 400 mm speed range 3150 rpm drive power 4 kW SK 40 Weight 1700 kg Many Accessories and tools

This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine.

A CNC large-format rigid-bed milling and boring center Soraluce is available. Travel X/Y/Z: 4500mm/1600mm/1300mm, table dimensions X/Y: 6000mm/1100mm, max. table load: 5000kg/m², spindle bearing diameter: 90mm, tool holder: ISO 50, speed: 5000rpm, power: 43kW/32kW, rapid traverse: 35m/min, feed force: 16kN, coolant volume: 350l, delivery pressure: 5bar, tool positions: 40. Machine dimensions X/Y/Z: approx. 8700mm/5000mm/3850mm, weight: approx. 22000kg, control: Heidenhain. Including IKZ, chip conveyor, probe, tool probe and cooling unit. Documentation available. An on-site inspection is possible.

Used HERMLE UWF 1202 S Universal Tool Barrel and Drilling Machine CNC control HEIDENHAIN TNC 426 Technical data: Travels X-axis 850.0 mm Y-axis 630.0 mm Z-axis 500.0 mm Rapid traverse 10 m/min Table length 1200.0 mm Table width 550.0 mm Max. spindle speeds 20 - 4200 rpm Spindle motor power 7.0 kW Tool holder SK 40 Coolant 120 liters Total connection 16 KW Dimensions 3.3 x 2.4 x 2.4 m Space requirement 5.0 x 4.2 m See still under power

CNC vertical machining center Type: MAG CFV-1300i Manufacturer: Cincinnati Year: 2010 Control: Heidenhain TNC 530 X: 1300 mm Y: 540 mm Z: 720 mm Maximum table load: 1000 kg Max spindle speed: 9000 rpm Tool magazine: 24 positions Internal cooling Chip conveyor 4 pcs hydraulic vices Tool holders SK40 approx. 24 pcs New spindle In good condition, under power Find more here - / Contact us at -

A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026.

CNC vertical machining center Type: Vesta-1000 Manufacturer: Hwacheon Year: 2016 Control: Fanuc Series 0i-MD X: 1000 mm Y: 550 mm Z: 500 mm Distance table-spindle: 130 – 630 mm Working surface: 1100 × 502 mm Table load capacity: 700 kg Spindle speed: 12000 rpm Rapid traverse (X / Y / Z) m/min 36 / 36 / 30 Working feed (X / Y / Z) mm/min 1 – 24,000 Feed motor (X / Y / Z) kW 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Tool changer: 24 positions Cooling through the center of the tool 30 bar Power consumption: 30 kVA Coolant tank capacity: 380 l Chip conveyor 4th axis TSUDAKOMA Wireless workpiece probe + tool probe. Dimensions:3335 × 2200 x 2670 mm Weight: 6500 kg Machine in good condition, under power Find more here - / Contact us at -

CNC Press Brake Manufacturer: Blemas Type: 100-33 Year of Make: 1994 CNC control: Cybelec DNC 74 PSG Pressing force: 100 tons Working width: 3 m Weight approx. : 8 to. Approx. dimensions: 3,600 x 1,600 x 2,600 mm

Key data: 3000 mm, 4000 mm, 1500 mm

Heyligenstaedt Heynumill 2700-PF 3/5 axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Hsbi Ssyaazmsf Iwxonh Control Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm At Heynumill, the complete hydraulics were renewed in 2018, all electrical cables were replaced, the spindle cooling unit, both longitudinal conveyors were renewed and the heads were completely overhauled. The entire repair cost €160,000. In 2020, the milling gear was renewed.

CNC lathe TAKAMAZ EX 20 / Fanuc 15 TF -Control FANUC 15 TF -Turning diameter max. 260mm -Turning length approx. 500mm -Rod passage 42mm -Spindle speeds 40 - 4000 rpm -Spindle nose A2-6 -Tool positions (stations) 12 compartment / direct mount -Tool measurement (Tooleye) -Parts catcher -Tailstock -Collet holder 173 E -Spindle motor 7.5 KW Dimensions: LxWxH 2.6x2x1.8 meters / Weight : 2800 kg

Key data: 500 mm, 100 mm, 2500 1/min

Special price to be submitted at short notice

TSUGAMI MA 3 H - 10P Horizontal Machining Center 10 - Compartment Pallet Changer -Control FANUC 11-M -Travel X/Y/Z 340x260x400mm -10 - Compartment pallet change -B - Axis 360 DEGREES -Indexing 0.001mm -Speed range 36-5000 rpm -Feed range 1-6000 mm/min -Rapid traverses 12/meter-min -Tool holder BT 40 -Double-arm gripper -Tool magazine 62 stations -Drive power / spindle motor 7.5 KW -Electronic handwheel -Chip conveyor -Central lubrication -Coolant device -RS 232 data interface -Spindle oil cooler -Documentation Dimensions: LxWxH 4x2.4x2.4 meters / Weight 7000Kg

EUMACH MC 1050 P vertical machining center -CE marking -Built in 1999 -Heidenhain 426 -Fourth axis NIKKEN CNC 170 ZA / programmable directly from the controller -Oil cooler -Complete documentation -COMPLETE TECHNICAL DATA - SEE PHOTOS Dimensions: LxWxH 2.8x3.45x2.8 meters / Weight 6500Kg

Used machine Machine Type: CNC Turning Center Model No.: NLX3000Y/3000 Manufacturer: DMGMORI Control: Celos Year of Make: 2020 #001355 Turning diameter max. approx. 420 mm Turning diameter standard approx. 310 mm Chuck size approx. 300 mm Turning length approx. 3,123 mm Rod diameter max. approx. 90 mm Turret stations approx. 12 X-axis approx. 280 mm Z-axis approx. 3,170 mm Y-axis approx. 120 (±60) mm Tailstock approx. 3,164 mm Spindle speed max. approx. 3,000 rpm Speed AGW max. approx. 6,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Rapid traverse C approx. 300 rpm Power consumption approx. 54 kVA Compressed air bar,L/min approx. 5, 100 bar,L/min Footprint L x W x H approx. 8.30 x 3.50 x 2.41 m (without chip conveyor) Machine weight approx. 14,200 kg Main spindle 22/18,5KW • 3jaw chuck set • rpm 3000 • 12 station turre ...

The machine is in good technical condition, testing is possible after prior agreement. Pressing force: 35 tons • Working length: 1250 mm • Control system: CNC (precise adjustment of angles and stops) • Condition: Fully functional, currently not connected. Main advantages: • High accuracy: Stable frame and precise positioning for high-quality bending. • Compact dimensions: Ideal solution even for smaller workshops and operations. • Accessories: The sale includes the equipment visible in the photos.

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2006 CNC Control: Global Control Working area: 3 x 12 m Track width: 4,000 mm Track length: 15 m Extraction table 1 x Plasma torch with Hypertherm HPR260 1 x Plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filter system

Description Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2022 #001283 Location: Germany TECHNICAL DATA: Technical data Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Facilities Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - SK40 - Coolant tank - IKZ pump 20bar - Filter for coolant - Bed flushing via M-function switchable - coolant spray gun - spindle blowing air switchable via M-funct ...

Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement.

X-axis: 750mm, y-axis: 600mm, z-axis: 520mm, C-axis: 360°, B-axis: 180°, max. spindle speed: 18,000/min, control: Siemens SINUMERIK 840D powerline, connected load: 55kVA, length: 4603mm, width: 5250mm, height: 2785mm, weight: approx. 9t, operating hours power on: approx. 65,000h, spindle hours: approx. 19,000h. No defects known, internally maintained, without maintenance reports, with documentation, rotary table, high-pressure internal cooling and Bluhm spindle probe. An inspection on site is possible.

Key data: 350 mm, 700 mm

DMG Mori NLX2500SY/700 Manufactured on 2013 and put into operation on 2014. ZAchse: 700mm, Y-axis 100mm, turning diameter approx. 350mm. Spindle passage 70mm. Operation hours 5353 hours only as new C Axis Y axis B axis 3 Powered Wkz Collets feeder extra included Measuring arm Fully equipped See pictures Immediately available

BMEI BV100 CNC vertical machining center was built in 2007 in China by BMEI CO., LTD. The machine is used for precision machining of workpieces with a maximum weight of 700 kg. The machining process is performed inside a large workspace, which has been fully maximised to ensure the freedom of performed operations. Inside it, there is a stable work table with a length of 1300 mm and a width of 610 mm and with five T-slots for quick and easy attachment of tooling. The spindle, driven by a high-powered motor, reaches a speed of as much as 15000 rpm and moves in three X,Y,Z axes with feeds of 1050 mm, 510 mm and 560 mm respectively. The capacious 21-position tool magazine, on the other hand, allows storage of a large number of tools with a maximum diameter of 160 mm. A short tool change time of just six seconds reduces machine downtime to a minimum. All this is complemented by an advanced FA ...

CORMAK MILL850 CNC machining center was built in 2025. The machine has only undergone a test run and has never been in operation, it is like brand new. The CORMAK MILL850 1000 x 500 is the perfect choice for precision machining of workpieces with a maximum weight of 500 kg. The machine is distinguished by the use of many well-proven components that guarantee reliability and long-term performance. The machining process is performed inside a large, fully illuminated workspace. This space has been fully maximised to ensure the freedom of the performed operations. The hermetic enclosure of the workspace prevents possible dangers, as well as keeping the work area clean. The hardened work table with a length of 1000 mm and a width of 500 mm enables secure fixing of workpieces without overloading the design. The spindle, driven by a high-powered motor, reaches speeds of up to 12000 rpm. A ...

CNC lathe Type: TMM8i Manufacturer: Hurco Year: 2018 Control: Hurco WinMax 5 X: 198 mm Z: 508 mm Max turning diameter: 256 mm Swing over bed: 525 mm Swing over cross slide: 300 mm Max spindle speed: 4 800 rpm Spindle power: 13.2 kW Spindle nose: A2-6 Bar capacity: 50–52 mm 12-station servo driven turret Tool standard: VDI 30 (bi-directional indexing) Live tooling options available for milling/drilling operations Driven tools Tool probe Tailstock Chip conveyor Bar feeder: Samsys Multi 3000 Machine in good condition, under power Find more here - / Contact us at -

CK 50 CNC turning center was built in 2022. This state-of-the-art, extremely efficient machine is used in both unit and series production. Workpieces with a maximum diameter of 570 mm and a length of 500 mm are machined by means of a reliable spindle and cutting tools taken from a 12-position turret. The spindle, driven by a high-powered motor reaches a speed of 4200 rpm and moves in two X,Z axes with feeds of 270 mm and 610 mm respectively. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the turning process. The CNC CK50 lathe has an inclined bed, which increases the stability of the design through better distribution of loads during machining. This solution reduces the risk of vibration and oscillation, thus increasing turning accuracy and giving the ability to perform more complex operations. It also makes it easier to evacuate the  ...

Used machine Machine Type: CNC Turning Center Model: CLX 750 V3 Manufacturer: DMGMORI Control: SLIMllne® Multi-Touch Control Siemens Year of Make: 2021 Location: Germany #001273 Turning diameter max. approx. 700 mm Turning diameter standard approx. 610 mm Chuck size approx. 400 mm Turning length approx. 1,300mm Rod diameter max. approx. 127 mm Turret stations approx. 12 X-axis approx. 435 mm Z-axis approx. 1,300 mm Tailstock approx. 1,200 mm Spindle speed max. approx. 2,000 rpm Speed AGW max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Compressed air bar,L/min approx. 5, 100 bar,L/min Machine weight approx. 10,200 kg Facilities - Main spindle A2-11" with AC motor, 36/46 kW (100/40%), 2,000 min-¹ - 3-jaw chuck 300mm - Partial hollow clamping device for the main spindle 127mm - Chuck flush for the main spindle - 12-fold servo tool turret mount VDI ...

Used machine CNC turning-milling center Machine type: DMG MORI CLX450TC Control:DMG MORI SLIMline® Siemens Operate Year of Make: 2022 Location: Germany #0011281 Technical data Turning diameter max. spindle 1+2 approx. 400 mm Turning diameter standard spindle 1+2 approx. 250 mm Rod diameter max. spindle 1 approx. 65 mm X-axis approx. 750 mm Z-axis approx. 1,100 mm Y-axis approx. +-100 mm A-axis (spindle 2) approx. 1,200 mm B-axis approx. 240° (+-120°) mm Spindle speed 1+2 approx. 5,000 rpm Speed milling pindle approx. 12,000 rpm Rapid traverse X/Y/Z approx. 40 m/min Rapid traverse A spindle 2 approx. 40 m/min Rapid traverse B axis approx. 70 m/min Power spindle 1+2 max. approx. 17 (40%) kW Power milling spindle max. approx. 10.5 (40%) kW Facilities Main Drive Spindle 1/2 17KW 40% - 5000rpm - Turning-Milling Spindle HSK63 10,5KW 40% - 12,000rpm - tool magazi ...

Used machine Machine type: CNC turning and milling center Model No.: CTXgamma1250TC4a Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2020 #001348 Location: Germany Technical data - Main spindle as integrated spindle motor, ISM102 - Sub-spindle as integrated spindle motor, ISM 76 - tailstock function for the sub-spindle - C-axis and spindle brake (hydr.) - Chuck rinsing device of the main spindle, external - Absolute, direct displacement measuring systems X-'Y-'Z1-axis - Differential stress main spindle - 36-cavity tool disc magazine - Hinge belt chip conveyor - Coolant system 8/20/80 bar - Coolant supply through the sub-spindle - Coolant spray gun - Mechanical oil mist separator - Automatic work area door - Workpiece probes - Tool turret at the bottom This offer is subject to change and non-binding. Changes, errors and prior  ...

Used machine DMU40eVo with EROWA Magazine Machine type: CNC machining center 5-axis vertical Model: DMU40eVo with EROWA Manufacturer: DMGMORI Control: CELOS Heidenhain TNC640 Year of Make: 2019 Location: Germany #001371 Options: -Motor spindle speedMASTER® HSK-A63 -Spindle speed 20-20,000 min-1 -NC swivel rotary table -Tool magazine 210 places -Scraper chip conveyor -Internal coolant supply (IKZ) paper belt filter 20-80bar -Advanced chip flushing -Blowing air through the center of the spindle -Rotating lens -Oil and emulsion mist separator mechanical - Infrared touch probe -Tool breakage detection TRS2 -Preparation 3D quickSET -Signal light, four-color -DMG MORI automation interface -Pneumatic control of the PowerChuck 210 zero-point clamping system -EROWA Robot Compact (ERC80) -Magazine:15x rack level PC210 with 3 pos. each = total 45 pos. Changes, Thi ...

Used machine DMGMORI NHX6300 Machine type: CNC machining center horizontal Model No.: NHX6300 Manufacturer: DMGMORI Control: CELOS MAPPS Year of Make: 2021 Location: Germany #001396 TECHNICAL DATA: Travels: X-axis: [mm] 1050 Y-axis: [mm] 900 Z-axis: [mm] 1030 B-axis 0.001° Rapid traverse: (X/Y/Z) [m/min.] 60 Speed range: [1/min.] 12,000 Drive power: [kW] 55/30 Tool holder: HSK100 Tool Changer Tool Positions: 120 Pallet system Number of pallets: 2 Pallet size: [mm] 630 x 630 Machine weight: [kg] 18,700 Facilities Control F31iB with CELOS spindle cone HSK-A100 preparation for coolant system by the spindle rotary table with full-fledged 4th axis 120-fold tool magazine (HSK-A100)- Coolant Washer Nozzles for Mist Separator INTERLIT TMF300/980 Setup Station Connection Compact filter system 70 bar-INTERLIT coolant cooler 15 kW in-machine measuring system (spindle ...

Used machine CNC machining center horizontal Manufacturer:DMGMORI Type:NH4000DCG Year of construction:2021 Control Type:FANUC F31iB Origin: Japan Location:Germany Delivery Time Technical data Traversing range X-axis approx. 560mm Y-axis approx. 560mm Z-axis approx. 630mm Table 360° 1° Workpiece diameter approx. 630mm Workpiece weight max. approx. 400kg Speed max. approx. 14,000 rpm Spindle motor approx. 18.5/11KW Number of tool positions approx. 40 Rapid traverse approx. 50m/min Mounting Taper BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 34kVA Footprint L x W x H approx. 2,360×3,914x2,711m Machine weight approx. 9,600 kg Automatic Rotary APC Tool Holder: BT40-Max. Spindle speed 14,000 min-1,-18.5/11 kW (10min/100% ED)-Number of Tools: 40 (Chain Type)-Table Indexing 1° Scraper Belt Conveyor with drum filter preparati ...

From now on we can arrange the following services for you! ✔ CAD/CAM programming Experts support you in programming your components – from the simple 2D contour to complex 5-axis simultaneous machining. We work with market-leading CAD/CAM systems and optimize your programs for maximum efficiency. ✔ Cost-per-part calculation We analyze your components with regard to cost-effectiveness. Together we determine your unit costs and help you to make optimal use of the machine and processes. ✔ Feasibility studies Before purchasing, we check the technical feasibility of your applications. How to get Certainty that the machine meets your requirements and that your production is sustainable supported. ✔ Programming Training Our training courses are aimed at beginners as well as advanced learners and are individually tailored to Adapted to your requirements. How to en ...

Used machine Universal Machining Center Machine type: DMG DMF 360 / 11 linear Control: Heidenhain TNC 640 Celos Year of Make: 2017 TECHNICAL DATA: Travels: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Dynamic Pack for DMF 360 linear (Y1100) Rapid traverse: (X/Y/Z) [m/min.] 80 / 60 / 60 Speed range: [1/min.] 20 - 15,000 Drive power: [kW] 46 / 30 Tool holder: SK 40 Tool Changer Tool positions: 60 NC rotary table Table size: [mm] 3,200 x 1,100 Max. table load: [kg] 1,200 Features: Internal cooling (IKZ): [bar] 40 Coolant tank: [l] 600 Chip conveyor Chip rinsing gun Oil mist extraction Air through spindle center Probe Spindle Preparation for use 3D quickSet Automatic doors Electronic handwheel This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Machine type: CNC turning and milling center Model: CTXalpha 500 V6 Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2022 #001272 Technical data Turning diameter max. approx. 240mm Turning diameter standard approx. 200mm Chuck size approx. 210mm Turning length approx. 480mm Rod diameter max. approx. 52/option65mm Turret Stations 12 X-axis approx. 210mm Z-axis approx. 525mm Spindle speed 1/2 approx. 5000/6000 rpm Speed AGW max. approx. 5000U/ Rapid traverse X/Z/Y 30/30/22.5 • Main spindle 5000 Ulmin • Hydraulic 3-jaw chuck 210 mm • Sub-spindle 6000 Ulmin • Hydraulic 3-jaw chuck 170mm • 12 station turret VDI 30 Trifix • Tool drive for all stations • C-axis • Y-axis • Alternating speed • Coolant supply through the sub-spindle • Swivelling tool presetter • Coolant spray gun, 5bar • CTXalpha  ...

Used machine Machine Type: CNC Machining Center Vertical Model: NVX5100 2nd with Matris robot cell Manufacturer: DMGMORI Control:DMG MORI Celos Year of construction / Ib: 2019 / 2022 #001312 Technical data Travel range X-axis approx. 1050 mm Y-axis approx. 530 mm Z-axis approx. 510 mm Table size approx. 1,350x600 mm Workpiece weight max. approx. 1,200 kg Speed max. approx. 12,000 rpm Spindle motor approx. 37/22 KW Number of tool positions approx. 30 Rapid traverse approx. 30 m/min Mounting cone approx. BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 45 kVA Footprint L x W x H approx. 3.1 x 2.85 x 2.6 m (without chip conveyor, without robot) Machine weight approx. 7,300 kg Main Drive with Higher Torque - Tool Holder Cone for BT-40 Tool Holder - Tool magazine with 30 places (#40) - Door for tool magazine - Hinged belt conveyor  ...

Used machine Machine Type: CNC Machining Center Vertical Model No.: CMX1100V Manufacturer: DMGMORI Control:DMG MORI SLIMline® Multi-Touch Heidenhain Year of Make: 2022 #001358 Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for tightening bolts DIN 69872 - Direct position measuring system X-Y-Z - Magazine with 30 tool positions - Coolant supply through spindle (IS) bar 20 - Double switching filter - Coolant-blown air switching externally via M-function - Chip conveyor (scraper belt, left side) - Tank capacity left side chip conveyor 250 - Coolant spray gun for chip removal - Automatic cab roof - Signal light - Electronic handwheel - Button kit spindle and table Traversing range X-axis 1100 mm Y-axis 560 mm Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Footprint L x ...

Used machine Machine Type: CNC Turning Center Model No.: CLX450V4 Manufacturer: DMGMORI Control: SLIMline® Multi-Touch Contr./Fanuc Year of manufacture: 2023 #001354 TECHNICAL DATA: Turning diameter max. approx. 400 mm Turning diameter standard approx. 310 mm Chuck size approx. 260 mm Turning length approx. 755 mm Rod diameter max. spindle/chuck approx. 80/78 mm Turret stations approx. 12 X-axis approx. 276 mm Z-axis approx. 830 mm Y-axis approx. 120(+-60) mm Tailstock approx. 800 mm Spindle speed approx. 4000 rpm Speed AGW max. approx. 4000 rpm Rapid traverse X/Z approx. 30/30 m/min Rapid traverse Y approx. 22.5 m/min Footprint L x W x H approx. 4.30x2.45x2.30 m (with chip conveyor) Machine weight approx. 6,250 kg Main spindle A2-8" 17 / 25.5 kW (100/40% ED), 4,000 rpm - 3-jaw chuck - Differential Compressive Stress for the Main spindle - Foot control ped ...

Used machine CNC Turning and Milling Center Machine Type: CNC Lathe Model No.: NLX2500Y/700 Manufacturer: DMG MORI Control: CELOS Year of Make: 2016 #001252 - Main spindle 4,000 rpm - Clamping cylinder main spindle - 3 cheek chuck - Foot switch (double) for main spindle - Y-axis - 12-speed BMT60-star turret for powered tools - Cantilever length X-axis driven tools 100mm - Scraper belt chip conveyor, rear discharge - High-pressure cooling system (800/1,100 W) 5bar - Line filter for coolant - Mechanical interface for oil mist separator 150mm - Without in-machine tool presetter This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 TECHNICAL DATA: 5. Axis 3 + 2 axes non-simultaneous X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 520 Rapid traverse: (X/Y/Z) [m/min.] 30 Max. speed: [1/min.] 12,000 Drive power: [kW] 13 Torque: [Nm] 82 Tool holder: HSK63 Tool positions: 60 NC swivel rotary table B-axis -10° / +95° C-axis 360° Table size: [mm] 800 x 620 Max. table load: [kg] 350 Space requirement (LxWxH): [m] 5.35 x 4.14 x 3 Machine weight: [kg] 4,700 Features: Chip conveyor Internal cooling (IKZ):40 [bar] Tool breakage detection Heidenhain TS 27 R Probe Heidenhain Blum Lasers for Tools Direct Path Measurement System Electronic handwheel Machine preparation for DMG MORI PH 150 - Automatic lifting door on the right - Robot interface (DMG MORI standard) - ...

Used machine Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of Make: 2008 TECHNICAL DATA: Travels: X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 560 Feed: (X/Y/Z) [m/min.] 90 Rapid Traverse: (X/Y/Z) [m/min.] 90 / 90 / 90 A-axis -10 B-axis +110 C-axis 360° Speed range: [1/min.] 28,000 Tool Changer Tool holder: HSK-A63 Tool positions: 60 Tool diameter: [mm] 80 / 140 Tool length: [mm] 300 NC rotary table Ø 750 Max. table load: [kg] 800 Table size: [mm] fixed tabe: 950 x 650 Max. table load: [kg] 1,000 Features: Chip conveyor This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine CNC lathe Machine type: DMG Gildemeister NEF 600 Control: Heidenhain IT Turn Plus Year of Make: 2006 TECHNICAL DATA: Max. turning length: [mm] 1,250 Max. Rotary Ø over bed: [mm] 600 Max. rotary Ø over slide: [mm] 410 Spindle bore: [mm] 90 Number of controlled axes: 2 Speed range: [1/min.] 3,000 Drive power: [kW] 36.5 / 27.5 Torque: [Nm] 785 Tailstock MK 5 Quill 80mm Number of turrets: 1 Travel X-axis ob. Rev. / unt. Rev.: VDI 40/8 Tool positions: 8 Machine weight: [kg] 5,500 Space requirement (LxWxH): [m] 5.0 x 2.0 x 2.2 m Features: Chip conveyor 3-jaw chuck [mm] 315 This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed ​​range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed ​​range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...