vertical form seal used for sale

X, Y, Z Travel :600x400x400 mm Machine dimentions WxDxH : 1600x2700x2858 mm Machine weight :440 kg Workpiece dimentions WxDxH :1000x700x400 mm Max. electrode weight :100kg Max. Workpiece weight 1000 kg

P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, bleach ...

10 and 20 ltr for sale. Closure 61 mm

Ice machine Ital Form Stainless steel construction and specific materials approved for food contact Standard working conditions: - Inlet water temperature 15°C - Ambient air temperature 20°C Dimensions: 1380x740x1015mm Electric power: 6kW Voltage: 400V 50Hz Productivity: 1500kg/24h Ice temperature: -5°C / -7°C Ice flake thickness: 0.9/1.2 mm Weight: 381 kg

Two-chamber vacuum machine Ital Form Dimensions of the machine: 1845×868×1020mm Chamber dimensions: 880x755x170mm Sealing length: 820mm Number of heaters: 2 Electric power: 3kW Weight: 295kg

Key data: 800 mm, 1900 kg

A favourable price and quality are not a contradiction at Hanst Tec - after all, there is the FORMAXX Z series. Conventional die-sinking EDM systems designed in such a way that their price enables cost-effective hourly rates, while the technology fulfils all the quality criteria that are typical for Hanst Tec: - easy to operate - reliable Traverse paths: X - 500, Y - 400, Z - 350 mm maximum distance Table - working head: 275-625 mm Workpiece load: 1900 kg The machine is in good condition, and available immediately!

P427 - used approx. 30 m³ / 30,000 litre HDPE tank, plastic tank, double-walled, flat-bottom tank. Technical details: Content: approx. 30 m³ / 30,000 litres Material: HDPE tank, plastic tank Manufacturer: Formoplast Specific gravity: min. 1.55 kg/L Dimensions: approx. Ø 3.49 m × H total approx. 5.50 m Certification mark: PA-VI 321.103, AHL/ASL listed Other: Used HDPE tank in good condition, inside professionally cleaned, from the outside as shown in the pictures. Above-ground storage tank for outdoor installation, standing on flat floor, double-walled with outer tub, dome on top of the roof, several inlets and outlets, opaque, incl. railing on top of the roof. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. If the ladder fits on the truck, it can be supplied. This container can be used as a storage tank for many different media ...

Dough laminator Dimensions: 2550x1000x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 500x1980mm Distance with adjustable roller: 1-45 mm Weight: 220kg

4,000 m construction profiles, C-shape galvanized Used goods, good condition, see pictures Length per piece approx. 12m Profiles 110x90mm Material thickness approx. 3mm Negotiation price: € 4,90 net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

General features: Touch screen Multi-step cooking function Even heat distribution with two-way fan Adjustable cooking temperature between 0-300 °C Adjustable cooking time and digital display Door system with sensors Tempered glass Inner glass that can be opened for easy cleaning Stainless steel body Combined oven Dimensions: 990x1330x1240 mm Capacity of trays: 7+2/400x600 mm Electrical power: 15 KW+5.5 KW 380 V Weight: 360 kg Fermentation chamber Dimensions: 990x1330x770 mm Tray capacity: 9/400x600 mm Electric power: 3 KW Weight: 103 kg

Baking oven with fireclay strip Conveyor belt in refractory stone fillets Self-lubricated bearings for simplified maintenance Stainless steel front, sides, top, and interior The Eco button set the oven on standby during work pauses to save energy Digital control bake time and conveyor speed Conveyor Belt Width：800mm Electrical power: 17-34kW External dimensions: 95x145x110cm Maximum operating temperature: up to 450C

Manual dough divider Ability to work in any environment Blades made of stainless steel Divide the dough completely, non-sticky Disassembling the desk Dimensions: 370×590×1160mm Dough weight: 30-180 g/pc Capacity: 20 pcs Weight: 125 kg

Dough laminator Dimensions: 3480x1110x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 610x2800mm Distance with adjustable roller: 1-40 mm Weight: 260kg

Manual dough divider Ability to work in any environment Blades made of stainless steel Divide the dough completely, non-sticky Disassembling the desk Dimensions: 370×590×1160mm Dough weight: 30-180 g/pc Capacity: 36 pcs Weight: 125 kg

Table dough laminator Ital Form Dimensions: 2350x870x620mm Electrical power: 0.4kW Voltage: 220V 50Hz Distance with adjustable roller: 1-35 mm Weight: 150 kg

Tubular dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry Dimensions: 350x550x800mm Electric power: 0.6kW Portion weight: 30-300 grams Machine weight: 62 kg Delivery time: 6-8 weeks after advance payment

Table dough laminator Ital Form Dimensions: 2350x910x650mm Conveyor belt size: 500x1980mm Distance with adjustable roller: 1-40 mm Electrical power: 0.55kW Voltage: 380V 50Hz Weight: 130 kg

Tubular dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry Dimensions: 350x550x800mm Electric power: 0.6kW Portion weight: 30-600 grams Machine weight: 65 kg

Moulding machine Ital Form Made of duralumin and steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1200mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1500mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Machine type: Standing Dough Sheeter Material: Full Stainless Steel Belt size: 630 x 2400 mm Expanded: 3100 x 1100 mm Folded: 760 x 1720 mm Dimensions: 3100 x 1060 x 1100 mm Roller adjustable gap: 1-38 mm Max rolling capacity: 6.5kg/time Electric power: 0.75 kW - 380 V Weight: 260 kg

Moulding machine Ital Form Completely made of stainless steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Moulding machine Ital Form 4 cylinders Rollers 500 mm long Dimensions: 850x1200x1150mm Electric power: 0.75kW Weight: 170 kg

Bread maker and rolling pin maker Dimensions: 88x88x120 Voltage: 220-400 V Electric power: 0,55 kW Dough weight: 20-1000g

Spiral dough mixers Container capacity (capacity): 20 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 8 kg Bowl Capacity: 20 liter Mixing Speed: 150/200 r/min Bowl Speed: 12/20 r/min Voltage: 220V/380V 50Hz Electric Power: 1.5 kW Machine Size: 730x390x900 mm

Automatic bread cutting machine Automatic bread slicer of modern design is made of stainless steel and fully complies with CE standards It is designed for large capacity and serial bread cutting It has a system for packing sliced bread It is easy to transport as well as to clean and maintain By removing the drawer in the lower part of the machine, the crumbs are emptied so that the machine does not require any additional maintenance Dimensions: 242 × 75 × 135cm Electrical power: 0.85kW Weight: 312kg Capacity: 1500 loaf / h Slice thickness: 6-15mm

Spiral dough mixer Container capacity (capacity): 32 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 12.5 kg Bowl Capacity: 32 liters Mixing Speed: 150/200 r/min Bowl Speed: 12/20 r/min Voltage: 220V/380V 50Hz Electric Power: 1.5 kW Machine Size: 750x435x900 mm

Spiral dough mixer Container capacity (capacity): 40 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 16 kg Bowl Capacity: 40 liter Mixing Speed: 150/200 r/min Bowl Speed: 15/20 r/min Voltage: 220V/380V 50Hz Electric Power: 3 kW Machine Size: 800x480x1000 mm

Dough mixer Container volume: 80 liters Dough mixers are intended for professional use in the bakery and catering industry They are used to prepare primarily dough, but they can also be used to prepare other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger amounts of dough continuously They consist of a container for ingredients and a mixing tool (spiral) Features: Flour capacity: 30 kg Test capacity: 50 kg Container capacity: 80 liters Mixing speed: 125/250 rpm Bowl speed: 12.5/25 rpm Voltage: 380V 50Hz Electricity: 3.5kW Machine size: 950x590x1100 mm Weight: 290 kg

Automatic slicer Ital Form Dimensions: 480x650x530mm Electric power: 0.37 kW Voltage: 220V 50Hz Cutting thickness: 0-6mm Blade diameter: 300mm Weight: 65 kg

Vacuum machine, single chamber Efficient vacuum machine of exceptional quality for vacuum packaging of meat, cured meat products, fruits and vegetables Ideal for fast food facilities, hotels, restaurants and other catering facilities Dimensions: 540 × 490 × 540mm Heaters: 2 x 40 cm Electrical power: 1.5kW Weight: 59 kg

Type: Meat breading machine Manufacturer: Ital Form Liquid and dry panada Band width: 150 mm Belt speed adjustable with a speed regulator Electric power: 2 kW, 220 V Capacity: 2100 pieces/hour External dimensions: 870 x 420 x 650 mm Machine weight: 70 kg

Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3

Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3

Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Setting the thickness of the slice from 0 to 2.5 mm Hand wheel to blade ratio 1:3

Verbufa Forming Machine with Integrated Flattening Belt (MBF COEX) The latest series of Verbufa COEX forming machines with wide conveyor belt and integrated flattening belt is the solution for a high production capacity of filled products. The MBF COEX machine has been specially developed for the intelligent and efficient shaping and portioning of stuffed products such as potatoes, cheese, meatballs and croquettes. With the integrated flattening belt, this forming machine is also ideal for the production of stuffed burgers. The MBF is available with 2 to 16 product streams and a conveyor belt of 400, 600, 800 or 1000 mm width. Demonstration/demonstration machine of a factory representative

1 piece U-shape impact protection Height: 400 mm Material thickness: 4 mm Inner dimensions: approx. 150x145 mm Material colour: yellow-black incl. 6 pieces of ground anchors NEW from Eitorf warehouse

Product number: 3066 Type: PRoGRILL 1175 TFEF Serial number: 3237006 Year of construction: 2014 Belt width: 1100 mm Cooking length: 10000 mm Heating: thermal oil, 189kW + electric, 128kW Exhaust: 1000 m³/h Steam: 3 - 7 Bar Compressed air: 6 Bar, 12 l/min Water: 15,4 l/min for belt washer Power: 3 x 400V, 50Hz, 168kW Dimensions: 10000 x 2200 x 2450 mm With flipover conveyor in the middle Including welding trolley

The MBF with integrated flattening belt was specially developed for shaping handmade burgers, tartare and minced steak. In addition, this machine forms a wide variety of products into balls, discs and sticks. The Verbufa wide conveyor belt forming machine guarantees a high production capacity. In combination with the Handtmann vacuum filling machine and the Verbufa fill flow divider, a very high and consistent weight accuracy is guaranteed. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration machine/demonstration machine of a factory representative

Year of Manufacture : 2021 Model : TEMPORA 45.03L Type of machine : Edge banding machine Manufacturer: Format-4 Voltage: 400 V Phase: 3 PH Frequency: 50 Hz Current: 22.8 A Power: 14.5 kW Minimum Air Pressure: 7 bar Find more here - / Contact us at -

Exchange units for contour milling HOMAG

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

new corpus turning up machine - fixed elements Brand: Formetal Type: RT.90F technical data: - fixed elements Transport input length 2.500 mm Transport output length 1.000 mm Transport width 600 mm Working height infeed conveyor 700 mm working height outfeed conveyor 250 mm Transport speed 10 - 25 m/min. (with inverter control) Different speed for load and unload max. weight 100 kg - corpus turning up machine RT.90F without electric equipment OPTIONAL: - Safety light barrier (infeed and outfeed) - electric box with SIEMENS PLC S71200 - Safety fence

Manufacturer: Format 4, Type: Profit H20, Year: 2014, Feeding speed max m/min: X-80, Y-80, Z-20, Working range X: 3830, Working range Y-axis: 1680, Working range Z: 275, Vacuum pumps m³/h: 90, incl. tools: yes, Gesamtanschluss kw: 18, Weight approx. kg: 3350, Year :2014

Manufacturer: Homag Druckzone 6-fach, Spare part from machine: KL 79, Type: Formsttrecke, Year: ca.95, Rollers: yes, Free-standing: yes, Roller size: ca 40 mm, Gluing part right side: yes, Year :ca.95

Manufacturer: Formoplast, Type: PE 100 Doppelwandbehälter, Year: 2014, Durchmesser m: 2,5, Zulässiges Füllvolumen m³: 15, Zulässiges Füllhöhe m: 3,06, Zulässiges Füllungsgrad : 95 Prozent, Betriebstemperatur Grad: 20, Befülltemperatur Grad: 30, Zulässiger Volumestrom m³/h: 72, Zulässiges Belastungswert kN/m³: 15, Füllmedium: Kauritleim, Aufstellung: im Raum, Year :2014

Tol measurements: . 0 weight max.: . t range L-W-H: . mm The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions of business and sale apply.about usmore than 400 of our own machines in stockover 15,000 m² storage area, crane capacity 70 tmore than 10,000 items accessories for your workshopIf you want to sell machines production lines or your business, please contact us.you will find further offers on our website.viewings are possible by arrangement.we look forward to your visit.your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Italpresse, Year: 2005, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: 2, Size of heating plate mm: 1450 x 2800, Pin system: no, Multifunktionsrahmen: yes, Automatical glue supply: yes, Year :2005

Reading type: . 0 weight - pallet system: . kg length: . mm Calipers, depth gauges Calipers Format: 250mm 300mm 1500mm 3000mm, make: Preissner 2000mm Depth gauge: 300mm, make: Format 200mm The technical data are manufacturers or operators specifications and are therefore non-binding for us. We reserve the right to sell items prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items, accessories for your workshop If you want to sell machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.