vertical form and used for sale

Mitutoyo digital measuring system consisting of an ABSOLUTE digital dial gauge ID-C112B, mounted on a measuring stand with granite top, including Digimatic mini processor DP-1VR with integrated print function. The system is intended for precise measuring, comparison and testing tasks in the measurement and quality sector. The granite slab is part of the measurement setup and is included in the scope of delivery. Condition • Used Scope of Delivery • Mitutoyo Digital Dial Gauge ID-C112B • Measuring Stand • Granite Slab (300 × 200 × 50 mm) • Digimatic Mini Processor DP-1VR with Push Function • Connection Cable Digital Dial Gauge • Manufacturer: Mitutoyo • Model: ID-C112B (ABSOLUTE) • Code: 543-250B • Measuring Range: 0 – 12.7 mm • Resolution: 0.001 mm • Measuring System: Absolute Measuring System (ABS) • Display: Digital • Data Interface: Mitutoyo Digimatic ...

11x VKBA1361 SKF 1x VKBA1436 SKF 1x VKBA1436 SKF 9x VKBA1485 SKF 1x VKBA3907 SKF 1x VKBA3907 SKF 8x VKBA625 SKF 5x VKC2083 SKF 140x VKC3620 SKF 1x VKMA04200 SKF 1x VKPC83428 SKF 1x VKPC83615 SKF 3x VKPC84208 SKF 2x VKPC84618 SKF 2x VKPC85611 SKF 3x VKS6150 SKF 2x F-112215 INA 4x F-203222.5 INA 9x F-83001.2 INA 1x 38KWD02G3CA126 NSK 10x CBU472921C Koyo and more Auction-ID: A1-46070-354

Stable, vertical unwinding and cutting stand for corrugated cardboard, suitable for rolls up to approx. 100 cm high and approx. 60 cm web width. With integrated cutting unit (OCS) and guide profiles for clean unwinding.   Manufacturer marking: OCS (label \"OCS 98004\") Material width: approx. 600 mm (measured) Roll height: approx. 1000 mm Suitable for: 1-wall or 2-wall corrugated cardboard from the roll Auction-ID: A7-46417-33

Lot of inserts consisting of a mixed stock of different inserts in original packaging. Included are different manufacturers, geometries and ISO grades. Partly unopened, partly opened packaging. The item is handed over in its entirety as shown. Content (excerpt from visible brands/types): Sandvik Coromant – numerous ISO plates (PMKNSH), various geometries and grades (e.g. 1044, 12055164, 880-05 06 05H-C-LM, etc.) Walter – ISO plates, including WXP45 and other grades Wohlhaupter – inserts for fine boring tools (XOMT12T308, WHC102 and others) Korloy – various milling and turning inserts Wetec / JD-Tools – ISO plates of various geometries Other manufacturers such as Innotec, Nine9 etc. General features: mixed stock of indexable inserts many original packaging available partly full, partly opened packs Manufacturer mix, mainly branded goods Condition: mostly unused (visible), indiv ...

Industrial control terminal in steel design, free-standing mounted on a column. Equipped with lockable front door with viewing window as well as pull-out keyboard and mouse tray. Inside there is a monitor, PC hardware as well as connection and power supply components     •    Type: free-standing operating terminal     •    Material: sheet     steel •    Front: viewing window, lockable     •    Keyboard tray: pull-out     •    Equipment: Monitor, PC, keyboard, mouse (without functional guarantee)     •    Power supply: 230 V     •    Mounting: floor-standing (stand) Size: approx. 800 × 750 × 1,650 ...

\" Double-spindle deburring machine / grinding and brushing machine Stationary deburring or grinding machine in heavy industrial design with two horizontally arranged spindles. A main spindle with clamped abrasive media, an additional spindle (according to the switch \"additional spindle\") can be switched on separately. Machine with protective tray/work tray, emergency stop, main switch and separate control cabinet. Extraction connection available (pipe connection on the side). Control panel with: • Main switch • Emergency stop • On/off button • Switch additional spindle • Brake switch • Operating hour meter (Kübler Codix) Solid welded steel construction, can be screwed together stably. Used condition with usual signs of wear. External dimensions approx.: 1200 x 1100 x 1300 mm (W x D x H) Double-spindle design Electrical connection via separate control cabinet Extraction  ...

\" Large batch of measuring and testing equipment – angles, thread gauges, hair angles, scribing tools, accessories Lots of various measuring and testing equipment from workshop stock. Included are hair angles (partly TGL, Made in GDR), precision angles, several small stop angles, thread gauges (including Whitworth 55°), feeler gauges, scribing tools, a Mitutoyo dial device (5 mN), various cutting and blade tools as well as numerous protective cases. • Hair angle with marking TGL 6163/1 – Made in GDR • Several precision angles in different sizes • Thread gauges \"Whitworth 55°\" – Made in Germany • Feeler gauge set (0.05 mm visible, among others) • Mitutoyo measuring device, type 546-113, 5 mN • Various small L-brackets (different dimensions marked) • Marking blades / cutting tools in wooden case • Some with protective cases \" Auction-ID: A7-46417-316

Lot solid carbide drills and thread mills Manufacturers: SIEVERT, HOLEX, Sandvik, WALTER and others Drills: from 3 to 11 mm Thread mills: from M3 to M12 approx. 10.0 kg Auction-ID: A7-46417-16

\" Conventional lead and tension spindle lathe – turning length approx. 1,200 mm – Ø 475 mm Chuck lead and tension spindle lathe made by Boehringer Bros. (VDF), industrial version. Equipment: • 3-jaw chuck Ø 475 mm • Tailstock • Rotating center punch • Extensive accessories in the side cabinet (jaws, holders, inserts, etc.) • Coolant device • Controls on the support Turning length approx. 1,200 mm.Condition: Used machine with age-related signs of use. Visually appropriate to the age. Manufacturer: Gebr. Boehringer GmbH Type: Lead and pull spindle lathe Turning length: approx. 1,200 mm Chuck diameter: Ø 475 mm Spindle bore: approx. 80 mm • Dimensions in mm (LxWxH) approx. 3,450 x 1,300 x 1,700 mm \" Auction-ID: A7-46417-373

Bundle of compression springs for tool and mould making   The pictured cabinet is not part of the offer. Quantity: approx. 112 pieces of storage viewing containers, each filled Content / Description • Extensive collection of compression springs for tool and mould making • Different diameters, lengths and spring thicknesses • Sorted in mixed colour storage viewing containers • Partly labelled (internal article numbers / dimensions) • Material apparently spring steel, suitable for industrial use No individual counting, no measurement, no variety or completeness guarantee Sale exclusively as a complete bundle, no partial sale.   The sale is without a cabinet   Contents: Sorted stock of compression springs for tool and mould making. The springs are labeled according to spring class (light, medium, heavy, extra heavy), outer diameter and free length.  ...

Tool holders and clamping adapters for BAZ special tool holders and clamping adapters for machining centres of the STAMA-MC series (including MC 440). Stock: Mixed lot with approx. several tool holders, chucks, reducers and spindle adapters. Typical designs include: STAMA special adapter with bayonet/form-fit contour Chuck with slotted clamping heads Reduction adapter for STAMA unit interfaces Mounting elements for special tools Tool carrier with STAMA logo and part numbers (including 150 864 / 150 865) Auction-ID: A7-46417-30

Item (3×) Measuring Tables / Measuring Stands – Clamping and Testing Fixtures Lots consisting of three measuring tables or measuring stands for measuring, testing and adjustment work in toolmaking, fixture construction or quality assurance. Stock:     •    2× heavy measuring stands     •    solid cast base plates     •    vertical column guide     •    height-adjustable holding arms with fine adjustment     •    suitable for holding dial gauges, Buttons or fixtures • 1× measuring table / clamping plate     •    solid cast design     •    engraved grid for positioning      ...

\" Scribing and control plate 200 × 200 mm, cast design with feet Scribing or control plate in square design. The plate serves as a flat support and reference surface for testing, marking and control work in toolmaking, quality assurance or in the workshop. Surface finely worked, all around with chamfer. Underside with four cast feet for a stable support. Dimensions: 200 × 200 mm Height: approx. 55 mm Material: cast body with machined surface Design: with feet \" Auction-ID: A7-46417-335

3 PCS box for QB1 built-in control unit code CM010Q; 4 PCS Cartridge Embroidery P-PX-350-SC 40/60 AER; miscellaneous fittings - - 90 x 120 x H150 Auction-ID: A7-46421-29

Manufacturer: Metall Meister Type / Model: not known / not specified Mobile tool trolley / assembly table with cast aluminium chipboard (T-slot) Mobile tool trolley / work table Steel frame construction with castors, cast aluminium plate as work surface Design of the work surface: Cast aluminium plate with T-slots Suitable for clamping, assembly and straightening work Condition: Used Work surface: approx. 1200 × 800 mm Auction-ID: A7-46417-74

\" Mixed lot of used milling tools, mainly face milling cutters, shape milling cutters and end mills in various designs. The batch consists of several milling tools of different types and sizes, some with original or storage boxes. Net weight: 13 kg \" Auction-ID: A7-46417-197

\" Industrial bench grinder / brushing machine with 3-jaw chuck and accessories Heavy, free-standing industrial grinding or brushing machine in solid cast iron design. Equipped with: • 3-jaw chuck • Side protective cover • Mechanical feed option • Electric foot switch (emergency stop version) • Multiple grinding/brushing rollers (see pictures) Machine was used for grinding/brushing. Condition: Used, heavily soiled, uncleaned. Sold as shown with existing accessories (rollers). Type: Stand-alone machine Drive: Electric motor (belt drive) Clamping adapter: 3-jaw chuck Operation: Foot switch Construction: Heavy machine body made of cast iron • Dimensions in mm (LxWxH) approx. 600 x 750 x 1100 mm \" Auction-ID: A7-46417-361

\" Industrial workbench with cabinet and drawers – Metal Meister Heavy industrial workbench in sturdy steel construction with solid wooden worktop. Version with: • 1-door base cabinet left • 3 drawers right • Rear wall strip • Solid steel frame Condition: Clearly used, heavily soiled. Worktop with signs of wear, scratches and bruises. Typical workshop use. Sale without content. Manufacturer: Metall Meister Grimma GmbH Construction: Welded steel Worktop: Multi-layer wood panel • Dimensions in mm (LxWxH) approx. 1500 x 700 x 850 mm \" Auction-ID: A7-46417-360

\" MASSI Prism and Clamping Block Set – 3 Pieces – for Round Material / Measuring Station Included: • 2 Solid Cross Prisms (heavy version) • 1 MASSI Step Prism 62 mm (No. 0/238) • 1 Clamping Bracket \" Auction-ID: A7-46417-310

\" Item: Height measuring and scribing device / precision measuring stand Manufacturer: unknown Type / model: unknown Condition: used, good mechanical condition • Solid cast iron base with round support/reference plate (Ø approx. 57 mm) • Vertical column with adjustable measuring arm • Fine adjustment via lateral levers / clamps • Front mount for dial gauge, probe or scribing tip \" Auction-ID: A7-46417-228

\" RENISHAW TP200 Probe Set with Accessories and Test Certificate Complete probe set from RENISHAW consisting of a TP200 probe (SF MOD) including several M2 probe inserts (straight version, different lengths) and original transport case. The probe has been tested on the RENISHAW Probe Test Rig (Test Passed). A detailed test report / measurement protocol is included and documents the repeatability as well as the preferred movement (pre-travel). Condition / scope of delivery • Condition: used, very good • Probe tested, test passed • Probe inserts mostly new / unused (orig.packaging) Scope of delivery: • RENISHAW TP200 probe (SF MOD) • Several M2 probe inserts • Original case • Original test certificate / measurement protocol • Manufacturer: RENISHAW • Type: TP200 SF MOD + TP200 • Serial number: 4W9T83 • Stylus length (reference): 50 mm • Probing force: 2 g • Te ...

Marking plate / measuring plate with tripod and holder Used marking or measuring plate with attached tripod and adjustable holder, suitable for marking, testing and measuring work in tool and machine construction.     •    Design: marking plate / measuring plate     •    Surface: finely machined, grid structure     •    Dimensions plate: approx. 250 × 360 mm     •    Plate thickness: approx. 34 mm     •    Material: Steel / cast     iron •    With column stand and adjustable holder Auction-ID: A7-46417-109

\" Bundle of collets and various tools (including reamers, twist drills, shank tools). The lot consists of several collets (in plastic boxes) as well as a mixed stock of tools such as reamers, drills and other shank tools in different dimensions. Net weight: 10 kg \" Auction-ID: A7-46417-196

REDI 125 - 87° 30 red tube stock (36 pcs); 31 pcs REDI 125 SDR 41 red color; 2 pcs REDI 160/200 SDR 41 PVC red color - - Footboard 90 x 120 x H90 Auction-ID: A7-46421-35

10 PCS kit adapt. warm. SR. A1G4-D9G4 code 016057X0; 2 PCS casing kit mod. 24; 1 PC casing kit mod. 30; 2 PCS Domi Compact connection protection - - 1 platform 80 x 120 x H160 Auction-ID: A7-46421-31

\" Lot of 2 pieces of industrial vacuum cleaners / wet and dry vacuum cleaners consisting of 1× CARRERA and 1× manufacturer unknown. – 2 industrial vacuum cleaners on chassis – metal containers – hose connections – mains operation – on/off switch on the device head – accessories partially available Scope of delivery: – 1 × industrial vacuum cleaner CARRERA – 1 × industrial vacuum cleaner, manufacturer unknown – accessories as shown – Device 1: Manufacturer CARRERA– Voltage: 230 V / 50 Hz – Power: max. approx. 2 × 1,080 W (according to the nameplate, information without guarantee) – Device 2: Manufacturer unknown – Technical data not clearly recognizable \" Auction-ID: A7-46417-143

Drilling- cutting machine Brand: Comec Type: Frontal 2 CN New machine Drawer parts machining in compact design Fast set-up for the smallest possible batch sizes thanks to CNC technology - Perfect machining The FRONTAL CN is ideally equipped for the machining of drawer parts and can be optionally equipped with drilling units from above, but also laterally, e.g. for drawer side parts. The drilling units at the top are suspended at the front of the upper beam so that a grooving saw unit can be mounted at the rear, for example, for drawing in top grooves. The machines can be equipped either with manual feeding or with automatic feeding magazine, so that the machines can work in continuous operation. For larger batch sizes, the FRONTAL is also available as a BASIC machine with conventional control.

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

BASIC FUNCTIONS   number of spindles: 1   number of turrets: 1   live positions: yes WORKING RANGE TURNING   swing diameter (max): 560 mm   turning diameter (max): 275 mm   bar diameter (max): 42 mm   worpiece length max.: 450 mm MAIN SPINDLE   spindle revolutions (min): 5600 /min   drive power: 11 kW X/Z SLIDE   number of tool positions (total): 11   number of live positions: 11   - rotation speeds (max): 4500 /min TAILSTOCK   sleeve stroke: 60 mm   sleeve diameter: 70 mm   holding force (max.): 8600 kN ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2700 mm   space requirements -front/back-: 1600 mm   total height: 1800 mm   total weight approx.: 3500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   European CE standards: yes

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm

CONTROLS   CNC controls FANUC 160 I BASIC FUNCTIONS   number of spindles: 2   number of c-axes: 2 WORKING RANGE TURNING   turning diameter (max): 42 mm   bar diameter (max): 42 mm MAIN SPINDLE   spindle revolutions (max): 6500 /min COUNTER SPINDLE   spindle revolutions (max): 6500 /min X/Z SLIDE   X-axis travel: 65 mm   Y-axis travel: 350 mm   rapid traverse Z: 30000 mm/min   rapid traverse X: 30000 mm/min   rapid traverse Y: 30000 mm/min X/Z SLIDE   Z-axis travel: 320 mm   X-axis travel: 265 mm   Y-axis travel: 326 mm   rapid traverse Y: 30000 mm/min ELECTRICAL SPECIFICATIONS   mains power supply: 54 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 1630 mm   total height: 1920 mm   total weight approx.: 4400 kg ATTACHMENTS (TURNING)   b ...

CONTROLS   CNC controls FANUC 31I MODEL A BASIC FUNCTIONS   number of spindles: 2   number of turrets: 3   live positions: yes   number of c-axes: 3   number of y-axes: 3 WORKING RANGE TURNING   turning diameter (max): 170 mm   bar diameter (max): 45 mm   worpiece length max.: 588 mm MAIN SPINDLE   spindle revolutions (max): 6000 /min   spindle bore diameter: 42 mm   spindle positioning: 0.001 °   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 6000 /min   spindle positioning: 0.001 °   c-axis: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3400 mm   space requirements -front/back-: 2000 mm   total height: 1900 mm   total weight approx.: 8000 kg

CONTROLS   CNC controls MAZATROL SMOOTH X BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1 WORKING RANGE TURNING   turning diameter (max): 658 mm   bar diameter (max): 80 mm   worpiece length max.: 1519 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   drive power: 30 kW   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 4000 /min   drive power: 26 kW   c-axis: yes X/Z SLIDE   Z-axis travel: 1585 mm   X-axis travel: 615 mm   Y-axis travel: 250 mm   rotating range B-axis up to: 210 °   rapid traverse Z: 50000 mm/min   rapid traverse X: 50000 mm/min   rapid traverse Y: 40000 mm/min X/Z SLIDE   rotating range B-axis up to: 0.0001 °   - rotation speeds (max): 12000 /min   - drive power: 24 kW TOOL MAGAZINE   number of positions: 72   tool diameter max.: 90 mm   - with free neighbour positions: 125 mm   t ...

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle guides need to be replaced. Machine equipment (1500.- CHF (below)): - 1x double face and longitudinal turning tool holder - 3x face and longitudinal turn ...

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 3600 mm   space requirements -front/back-: 1500 mm   total height: 2800 mm   total weight approx.: 2000 kg never used (NEW) ! - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm x 210 mm Weight:  ...

A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documen ...

Okuma Multus U 3000Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mmTurning length : 1000 mm____________Description:Main spindle:Technology:Motor spindleSpeed:4,200 rpmPower:22 kWTorque:427 Nmspindle bore:91 mmHollow clamping cylinder:86 mmC-axis:High precision packageChuck:SMW KNCS-N 275-86 K8Sub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:22 kWTorque:420 Nmspindle bore:80 mmHollow clamping cylinder:77 mmC-axis:High precision packageChuck:SMW BHD-FC 210-52-3Tool carrier X/Y/Z/B:Technology:Milling spindleSpeed:12.000 rpmPower:22 kWTorque:120 NmTool holder:HSK 63Y-axis:250 mm (+/- 125 mm)B-axis:240°Tool magazin:Number of stations:80Equipment:Measuring systems:Direct in X/Y/Z axis (glass scales)Chip disposal:Chip conveyorCoolant supply:IKZ system, 70 barCoolant temperature control:Deltatherm E4Chip rinsing:working area, manual gunAccuracy package:C-ax ...

SMEC NS 2000 MYear of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mmTurning length : 243 mm____________Description:Work areamax. turning diameter:288mmmax. machining length:243mmX-axis:175mmZ-axis:350mmMain spindleChuck diameter:210mmMax. bar diameter:67mmSpindle bore diameter:76mmDrive power:10.5/20 kWmax. torque:213 NMmax. speed:4,500 rpmTailstockQuill diameter:65mmQuill stroke:80mmAxial force:4,312 NCenter point adapter:MT4Tool turretNumber of tool stations:12Tool holder:BMT45Powered tools:YesMax. speed:5,000 rpm

Mazak Integrex i-100H SYear of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mmTurning length : 850 mm____________Description:In General:Year of manufacture:2023Control system:Mazak Mazatrol SmoothAiMax. machining diameter:600 mmMax. machining length:850 mmMain spindle:Technology:Motor spindleSpeed:6,000 rpmPower:11 kWMax. torque:184 NmBar capacity:51 mmC-axis:0.0001°Chuck:3-jaw chuckClamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:6,000 rpmPower:11 kWMax. torque:184 NmBar capacity:51 mmC-axis:0.0001°Tailstock function:YesTool carrier (X/Y/ZB):Technology:Travelling column with milling spindleX-axis:535 mmY-axis:210 mmZ-axis:900 mmB-axis:-30° / +210°Milling spindle speed:20,000 rpmPower:24 kWTool magazin:Technology:Shelf magazineNumber of stations:250Tool changer:Double gripperEquipment:Chip disposal:Chip conveyorCoolant s ...

Nakamura NTJ-100Year of manuf. : 2015 Control : Fanuc 31i-B Turning diam. : 175 mmTurning length : 678 mm____________Description:In General:Year of manufacture:2015Control system:Fanuc i 31-BTurning diameter:175 mmMax. turning length:678 mmSpindle:Technology:Motorised spindleSpeed:4,500 rpmPower:11 kWBar capacity:65 mmC-axis:0.001°Clamping cylinder:Hollow clamping cylinderChuck:Collet chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmPower:7.5 kWBar capacity:51 mmC-axis:0.001°Clamping cylinder:Semi-hollow clamping cylinderChuck:Collet chuckTool carrier I (X/Y/Z/B):Technology:Tool turretNumber of stations:12/24Tool holder:BMTTool drive:6,000 rpmX-axis:330 mmY-axis:80 mm (+/- 40 mm)Z-axis:1,040 mmB-axis:182° (+/- 91°)Tool carrier II (X/Y/Z):Technology:Tool turretNumber of stations:12/24Tool holder:BMTTool drive:6,000 rpmX-axis:127 mmY-axis:65 mm (+/- 32.5 mm)Z-axis:678  ...

Offer 25462 Technical data: - Drilling capacity in ST 37 to 32 mm - Drill spindle holder with tightening thread M 12 / MK 3 - Drilling spindle speeds 120 to 1600 rpm - Drilling unit height-adjustable by hand crank - Larger distance table / boring spindle 650 mm - Drilling spindle stroke with fine feed by handwheel 130 mm - Drilling spindle projection 205 mm - Drill milling unit can be rotated 360° - Coordinate table with 3 T-slots 730 x 210 mm - Table travel X-axis 250 mm / Y-axis 200 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 1150 x H 1100 x D 1100 mm - Weight approx. 270 kg

Dough divider / head machine KÖNIG, type: Classic Rex T5S -in very good condition- - Knitting drum SK 73 - 5 rows - For weights 65 - 160g - Output: up to 7,500 pcs./h - Weight range: 65 - 160 g - Electrical connection: 3x 400 V, 2 kW, 50 Hz, 6 A - Condition: Very good, ready to use Visits and test runs are possible by arrangement.

Filling machine Talsa F 25 NEW MACHINE, approx. 25 litres cylinder volume, Solid stainless steel construction, Ground stainless steel cylinder, Hydraulic pistons made of stainless steel, Lid and plunger made of solid stainless steel, Seals for lids and pistons flexible and low-wear, The motor and pump start and stop automatically (via internal contactor and microswitch) as soon as the toggle lever is pressed. Advantages: reduced energy consumption, lower heat and noise, as well as longer service life of the oil and hydraulic components, Piston can be easily removed with robust stainless steel hexagon piston puller wrench (included in delivery), High filling pressure for easy filling even of compact mixtures. No running of the sausage meat flow due to automatic decompression of the plunger. Locking of the toggle lever when lowering the piston. Automatic triggering/shutting off ...

Table cutter Talsa K 15, NEW MACHINE, approx. 15 litres bowl capacity, Touch screen 10 inches, infinitely variable knife speed 750 - 3500 rpm, Stainless steel construction, solid cast stainless steel bowl, with removable 3-piece cutter head as standard, (optionally also available with a 6 mm cutter head) programmable, automatic stop according to time and/or temperature, Quality knife of BE machine knife, transparent noise protection cover in accordance with CE, closed lower case, Digital, electronic sausage meat thermometer, Easy cleaning, el. Connection 230V, 2.25kW

Spray booth designed for painting and finishing, featuring a water curtain and integrated extraction system for efficient particle capture and a clean working environment. Auction-ID: A7-46462-31

Hydraulic and pneumatic sole attaching press. Auction-ID: A7-46462-5

2 pcs of telescope conveyors blue is from Budde and red without producent Collection date latest until 29.5.26. Auction-ID: A7-46443-5

Designed for molding and pressing the upper in the heel area of the shoe. Auction-ID: A7-46462-3

Thermal adhesive activator Auction-ID: A7-46462-4

2 pcs of telescope conveyors blue is from Caljan and gray from Sovex Collection date latest until 29.5.26. Auction-ID: A7-46443-7