vertical form and used for sale

Complete can filling and closing line for liquids (nutrition) in 250 gram aluminium cans. Product: nutrition liquids. Formats: diameter 65 mm, height: 90 mm, filling weight 250 gram. 24x per box. Capacity: up to 500 / 420 cans per minute (30.000 / 25.000 per hour) for different parts of the line (with automatic palletiser) but the last year reduced to 325 cans per minute (19.500 per hour) because of manual palletising of the carton boxes on a pallet. Dismantling date: March / April 2026., Line exisiting out of:, 1. Preformed can de-palletiser machine, separate layer by layer from the pallet including lid sorting unit., Manufacturer: van Uitert B.V., Year: 1996, Machine number: D05-11399-01, Serial number: 1996.07.005, Installed power: 10 kW - 400 V - 50 Hz, Consumption of air: 3 Nm3/h, Weight: 2.500 kg, Capacity: up to 500 cans/min = 30.000 cans/h, Control panel with Danfoss VLT frequenc ...

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

MHS Ideal SB Year of manufacture 2019, from dissolved Real Markt Machine is in good condition, but should be thoroughly cleaned before use. Three different cutting thicknesses can be set. Ideal for the self-service area in the store. Voltage: 230V Dimensions: 95x72x128H Weight: 190kg Power: 1000W Video about test run available

Ruck Zuck Dough Cutter Cake Cutter/14 Wheels/Smooth/CorrugatedMaterial: Stainless SteelDesign: 14 Wheels: 7 Wheels Smooth and 7 Wheels Serrated The cutting width is flexibly adjustable and can be made fixed so that you always achieve the same cutting width. Wheel diameter: 5.5 cmCutting width: 1 - 12.5 cm See pictures for details

Offered is a universal tool grinding machine: Speed: 2800rpm, grinding range: approx. 30-50mm diameter, grinding wheels: cup or dish wheels, weight: approx. 450-500kg, machine dimensions X/Y/Z: approx. 800mm/800mm/1500mm. Inspection possible by appointment.

Ruck Zuck Dough Cutter Cake Cutter/10 Wheels/Smooth/CorrugatedProduct descriptionMaterial: Stainless SteelDesign: 10 Wheels: 5 Wheels Smooth and 5 Wheels Serrated The cutting width is flexibly adjustable and can be made fixed so that you always achieve the same cutting width. Wheel diameter: 5.5 cmCutting width: 1 - 12.5 cm See pictures for details

Offered is a continuous dryer/drying system: Drying units: Alraun infrared and hot air tunnel, transport system: Alraun railing belt TB70x300 (model 2233), infrared drying (model IR70x60/250C/2109): IR radiant heat, digital temperature controller A-Senco TR-85, adjustable upper alarm value (uPal) up to 300°C, hot air drying (model WL70x60/150C/480m³/h/2208): convection heat/hot air, air capacity: 480m³/h, temperature range: controlled heat up to approx. 150°C, transport system: Alraun railing belt TB70x300 (model 2233): drive: SEW-EURODRIVE gear motor, control: MOVITRAC®-LT frequency inverter infinitely variable speed control, dimensions X/Y approx. 700mm/3000mm, inspection possible by appointment.

Vacuum Filling Machine/Sausage Filling Machine/Vacuum Stuffer Manufacturer: REX DÜKER Type: RVF 327 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and twisting of all types of casings. Particularly gentle sausage meat filling with a clear filling pattern. Equipment: 100 litre filling volume Funnel divisible 60/40 L Machine solid stainless steel Speed, speed and break length infinitely selectable Level indicator, piece counter, unit shutdown Portioning range 5 – 10,000 g Portioning speed up to 700 portions/min. Clipper connector on the back Max. filling pressure: 40 bar Three-phase current 400 volts, 50 Hz, 3 phases Program memory for 200 filling programs Unique hygienic design Modern drive concept Minimal energy consumption 12" touch screen control Extremely quiet and qui ...

A rotary indexing filling machine Hamba for piston-based dosing of liquid and viscous products is available. Cup diameter: 75mm, max. height: 80mm, filling volume range: 50ml-250ml, filling capacity: 4000/h, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible.

3 Axis Digital Display FAGOR Year of Make: 1975 Travel: X 500 Y 200 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Universal table 660 x 380 mm clamping surface Vertical milling head Extendable drill quill Milling cutter protective housing Machine Light Various tool holders SK 40 Chip tray Coolant Setup 4 pcs machine shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

Used tube machine for filling and sealing plastic tubes from Fullmatik type Tubeline PK. Instrumentation for tubes fi 19-30-35-40-50. Manufacturer's documentation. CE Year of manufacture 2021.

Used line for bottling milk into cartons from Elopak type E-PS1200UC ( manufacturer USA ) The line fills cartons with a capacity of 500ml and 1000ml. Capacity 12,000 cartons/h. Year of manufacture 2011. The line includes: Filler with carton former from Elopak type E-PS120UC. Power supply 380-480V 50/60Hz Conveyor type CM/FT Packing machine type CM/TP 25-B 400 Palletizer type CPA Dry lubrication system type DT Standard 16-20 T Elofoam unit type Foamatic A2 and BW Videojet Printer Videojet Printer Videojet Printer Cork Application System Type ICS1 Single Capsorte ECO activator type E-PS EC082 ECO activator type E-PS EC082

Model: Backsaver ST Year: 1999 Condition: Used Serial Number: 990216-3 Stock Number: 3253 Tipping height: 980 mm With rechargable battery and CTEK MXS 7.0 charger Tipping angle: 0 - 90° Working load: max 900 kg Container: 1000 x 1200 x 800 mm Power: 1Ph, 230VAC, 50Hz Dimensions 1400 x 1350 x 1150 mm Weight: 300 kg

Height=1.36 m, Overall length= 1.71 m, Overall width= 1.02 m, Net weight= 175 kg,

Manufacturer: GAI Model: 1730 TOP Type of Machine : Automatic bottle filling and corking/capping machine - Designed for still wine production from 1,000 to 3,000 bottles per hour - Functions include rinsing, deaeration, gravity filling, inert gas injection, and vacuum corking - Stainless steel construction with CE certification - Single-head corker Find more here - / Contact us at -

Manufacturer: Weinig Unicontrol 6, Type: Typ 6, Year: 1985, Control: SPS, Work piece width min-max mm: 25 - 260 mm, Min.-max. workpiece length in mm: 220 + 2xZapfen.<CRLF>max. 6000 mm, Min.-max. workpiece height in mm: 30 - 100 mm, Controlled lenght stopper: no, Studioeinrichtung Winkel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50 mm, Moulding spindles: 3, Länge Profilspindel mm: 300 mm, 1 spindle lift in mm: 100 mm, 1Engine power kW: 11 kW, 2 spindle lift in mm: 100 mm, 2 Engine power kW: 11 kW, 3 spindle lift in mm: 100 mm, 3 Engine power kW: 11 kW, Diameter of the spindle mm: 50 mm, Feeding speed max m/min: 5,8 - 80 m/min., Feed stepless: yes, Outer profiling package: yes, Splintering controlled: no, Horizontal spindle clocked: yes, Online connection: no, Work piece re-charging: no, Exhaust diameter mm: 180 mm, Required space L x W x H mm: 6000x3000x2300 m ...

max. load capacity: 1000 kg, with mobile storage rack

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

TECHNICAL DATA: Usable width: 400 mm Installed power: 1.5 hp

To participate in the auction it is necessary to pay 8,890.00 euros, ask the contact person andrea.bruni@surplex.com for bank details for the transfer. There are 3 lists of movable property in the \"documents\" section: GOODS IN ACCORDANCE WITH THE LAW : All these goods can be collected after the award GOODS TO BE BROUGHT UP TO STANDARD: For these goods, compliance is mandatory after purchase GOODS TO BE SCRAPPED : For these goods it is mandatory to scrap after purchase The timing for carrying out the total takeaway is 90 days from the final award. For further information on participation, timing, payment methods, take-away methods and more, consult the \"Call for sale\" in the \"Documents\" section or contact andrea.bruni@surplex.com Auction-ID: A7-44995-2

To participate in the auction it is necessary to pay 5,400.00 euros, ask the contact person andrea.bruni@surplex.com for bank details for the transfer. There are 3 lists of movable property in the \"documents\" section: GOODS IN ACCORDANCE WITH THE LAW : All these goods can be collected after the award GOODS TO BE BROUGHT UP TO STANDARD: For these goods, compliance is mandatory after purchase GOODS TO BE SCRAPPED : For these goods it is mandatory to scrap after purchase The timing for carrying out the total takeaway is 90 days from the final award. For further information on participation, timing, payment methods, take-away methods and more, consult the \"Call for sale\" in the \"Documents\" section or contact andrea.bruni@surplex.com Auction-ID: A7-44995-3

To participate in the auction it is necessary to pay 14,000.00 euros, ask the contact person andrea.bruni@surplex.com for the bank details for the transfer. There are 3 lists of movable property in the \"documents\" section: GOODS IN ACCORDANCE WITH THE LAW : All these goods can be collected after the award GOODS TO BE BROUGHT UP TO STANDARD: For these goods, compliance is mandatory after purchase GOODS TO BE SCRAPPED : For these goods it is mandatory to scrap after purchase The timing for carrying out the total takeaway is 90 days from the final award. For further information on participation, timing, payment methods, take-away methods and more, consult the \"Call for sale\" in the \"Documents\" section or contact andrea.bruni@surplex.com Auction-ID: A7-44995-1

Buderus combined heat and power plant EN20 Bosch KWK System GmbH Lollar CHP module / chip modules Engine VW 2.0L CBS Natural Gas Power output 19 KW Generator KOEZIE 225/4 Thermal power 34 KW with 1000 litre tank hot water Stainless steel chimney etc Available now! Tel. 01715213204

General SKU397X1140 MakeGab Neumann LocationBarneveld CEcheck Type22 l. Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Tube capacity22 l. Max. temperature-30°C/+180°C Shell capacity13 l. Shell diameter400 mm Shell length1090 mm Max. temperature-30°C/+180°C Shell connectionsDia. 125 mm Cover connectionsDia. 25 and 50 mm Information No.28123-21620 Year of construction2010 Weight355 kgShell and tube heat exchangersNew arrivalsGab NeumannHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working c ...

Weiler Commodor B incl. 3 - axis digital display - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection - 2x Emergency / Off - Swarf back wall - Coolant device - Work light - Multifix with inserts - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

a. 50 Open fronted storage containers / stacking and transport containers SSI Schaefer, type: 14/7-0a, 710/500x820x610mm – used -: Price per piece from location: 59.-€ (net)! Price for complete purchase: only 49.-€ (net) / piece! Manufacturer: SSI Schaefer Type: 14/7-0A Year of manufacture: unknown Colour: lacquered Material: Metal Weight (kg): 35 Nominal dimension (mm) LxWxH: 700x800x600 External dimensions (mm) LxWxH: 710/500x820x610 Payload (kg): 800 kg Load (kg): 2400 kg Wall Thickness (mm): 1.25 Floor thickness (mm): 2 Condition: good, Available: immediately Location: Mettmann

Used bread roll line W&P, type: Rollprofi -In bakery condition- For cut rolls, smooth and round knitted, long rolled and double rolls. - 5 rows - 600 mm working width - Integrated dough divider and drum rounder, Multimatic - Pre-proofing time: 12 min - 6 min before long-distance taxiing station - 6 min between long roller and cutting station - Weight range:24-85 g - Output: max. 4,680 pcs. / h Visits and test runs are possible by arrangement.

Bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In good used condition- Compact bread roll line - Mini Rex Futura head machine - Proofer G 2000, SA2-ST2 - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - Condition: good, everything checked - Ready to use - Machine is still being cleaned - Head machine output: approx. 4,000 pcs./h - Capacity proofer: approx. 2,500 pcs./h The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Complete dough line for the production of ciabatta, square bread and baguette Consisting of the higher-level production units: - Dough pre-portioner - Extruders - Dough sheet is formed - Flouring stations - Cutting roller for longitudinal cutting - Guillotine for cross-section - Dismissal - Length of the line: approx. 20 meters - Capacity: max. approx. 2,100 kg / h - Condition: Good, ready to use The facility has always received the service and is in good condition. Already dismantled and stored. Viewing is possible.

Preformed Bottle Filling, Capping, Labelling and Packing Line for 2-litre plastic containers (jugs/bottles) for fresh milk with screw cap closure. The line is equipped with integrated control systems and is suitable for hygienic operation., Scope of Supply:, 1. Filling and Capping Machine, - Integrated gravity filling and screw capping system., - Designed for CIP (Clean-in-Place) cleaning., - Fully enclosed construction with access doors., - Equipped with sterile air filtration system., - 32 filling valves and 10 capping heads., - Touchscreen operator control panel., - Cap feeding bunker with conveyor to capping unit., Manufacturer: Weightpack, Model: WFT 32.10.160, Serial Number: WL239, Year: 2008, Capacity: up to 7.000 containers per hour, 2. Leakage Testing Unit (Squeeze Tester), Designed to detect container leakage after filling., Manufacturer: Teledyne TapTone, Serial Number: E05-00 ...

Model: TRC1500/600 Year: 2002 Condition: Used Serial Number: 1790 Stock Number: 3213 Belt width: 600 mm Transport length 1500 mm Power: 3 x 400V, 50Hz, 0.09kW Dimensions: 1600 x 850 x 1000 mm Weight; 135 kg

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

Model VM400-30 Jaar 1998 Conditie Gebruikt Serienummer: 1990 Voorraad nummer: 3062B Belt width: 400 mm Capacity: max 30 strokes/min Hopper; 100 litres Belt speed: 1.5 - 15 m/min Compressed air: 6 Bar, 300 l/min Power: 3 x 380V, 50Hz, 5kW Dimensions: 2150 x 750 x 1750 mm Weight: 640 kg

Laboratory homogenizer mixer Manufacturer: Becomix Type: RW 2.5 Content: 5 litres boiler capacity Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!

Work and assembly table wood self-made approx. 250x100 cm, steel base, electrification

Machine name: Combined heat and power plant used Manufacturer: SEnergie GmbH Type: G6.12TI Year of Make: 2008 Generator: NEWAGE STAMFORD Generator Type: UC. I274D2 Generator kW: 100 kW Fuel Type: Sewage Gas Electrical power: 80 kW Thermal power: 123 kW Efficiency: 88.9% Dimensions: L 3,500 x W 1,100 x H 2,500 mm Curb weight: 3,000 kg Tech. Documentation: Yes Note: In 2018, a new engine was installed and the generator was rewound. Last service 15.10.2021 at 86,102 h Accessories: A control cabinet Condition: Used Price: On request

Used line for bottling juices into Tetra Rex cartons. 7.000 pcs/h Specifications: Tetra Rex Filling Machine: Type: Tetra Pak TR/27 Year of manufacture: 2016.11. Capacity: 7000 pcs/h Formats: 1 l, 0.5 l 2 Tray Making Machine: Type: Cardboard Packer 32 by Tetra Pak Year of manufacture: 2016.10. Formats: 23, 43 Conveyor 2: Type: Conveyor Control System Year of manufacture: 2016.10.

2 pieces of natural gas CHP in container Engine: Jenbacher J420 Engine version: B25 Power each: 1339 kW at altitude 1900 meters, at NN the power is 100 kW higher! Year: 2013 Generator: Leroy Somer LSA 52.2 L70 4P with 1970 kVA power Voltage: 400 V Hours: 13200 and 15600 The power generators were regularly serviced and checked. The systems are dismantled and immediately available. Subject to prior sale - errors possible! Internal reference number: E-1004-114

Year: 2005 Condition: Used Serial Number: 08060.01.01.00 Stock Number: 2597 Lifting height 1650 mm Sliding on rails Container: 200 litre tote bins Power: 3 x 400V, 50Hz, 0.75kW Dimensions: 1400 x 3150 x 2600 mm

Double work and assembly table wood self-made, 1 table approx. 400x100t cm, 1 table approx. 300x100t cm, small contents consumables

The TBA 8 V110 1000ml Square is a space-saving Tetra Pak solution for safe, aseptic filling of liquids. Their square design ensures maximum stability and efficient display on the shelf.

Cross-cut and mitre saw METABO KGS 216 M, blade size max. 216 mm, S/N 6017897464

A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible.