129,510 used machines on RESALE, but how to find them? Machine Search
Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive
Available in stock 5 x Used Capstone Display Panels. Most commonly used for Microturbines C60 and C30. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
Wrapping machine for deposited or enrobed chocolate products with or without center-filling in double twist wrap. Speed of the machine - up to 400 pcs/min Product dimensions: - Length: 20 – 75 mm - Width: 13 – 29 mm - Height: 8 – 25 mm - Diameter at bottom: 13 – 25 mm With original feeding system. More details in the attached document
2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power
bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ball screw with motor bell, bearing and coupling, D50x680mm, , mint condition Special price ! High quality parts from a major car manufacturer! If you have a VAT number we will gladly issue an invoice without VA. As good as new! The assembled linear actuator comes from a spare parts store of a mechanical processing was there for a long time in stock, is preserved and has never been used. Technical data: 1 pc ball screw with motor bell, bearing and clamping set for mounting on the drive motor consisting of: - 1 pc. motor bell with bearing for the ball screw drive and 1 clamping set for mounting on the drive motor, Fa. Grob - 1 pcs. ball screw drive MVD400-155-100-2, total length of the spindle approx. 560mm, thread length 355mm, pitch 10mm, Max. Total stroke 193mm, - 1 pcs. nut to ball screw, length of nut 162mm, Function guarantee! For second hand parts, we can ...
Weibert FS32 Dressing thickness planer Planer width: 320mm Planing shaft: 3-reversible knife shaft Motor power: 3KW n=4500U/min, 400V Passage height: 4-225mm Side stop WJ-300100 OPTIONS AT EXTRA COST: Professional dressing stop Long-hole drilling equipment Wescott Chuck 0-16mm Driving equipment Digital height adjustment Dressing table extension adjustable 750mm Drive motor 4KW S1
Hinged tape chains of different manufacturers, different sizes, new and used on request
Wenzel roughness and contour measuring station for crankshafts Measuring plate made of hard rock Length: 3670 mm Width: 850 mm Flatness tolerance according to DIN 876/1 Target value 48 μm Actual value 32 μm Ident No.: 14280 JFA Dispensing Blocks Item location: 42859 Remscheid More measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!
Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water
32 ignition coils and 16 spark plugs from Jenbacher J316 for sale The price for coils and spark plugs is 20 € each.
Weibert ADM 320 Dressing thickness planer Planer width 320mm 3 knife shaft Motor 3kW 400V Dressing table 1500 x 320 mm chip removal 5mm Speed 5000 rpm Thickness table 700 x 316mm Passage height 230mm Feed 7m/min Weight 260kg WJ-ADM-320
SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels
Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...
Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...
Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...
The thickness of the bread slice is 15 mm; Slicing speed: up to 70 pieces per minute; easily replaceable blade system
Spray booth water stabilizer Specifications: Agitator Pump Filler neck Ø 9 cm Thermostat display Level indicator Ø 176cm H: 67 thickness 3mm More items - new and used - can be found in our shop! International shipping costs on request!
Bread slicer Treif Diskus 400 Bäko Line circular knife -Circular knife bread slicer Treif Diskus 400 -with new knife -digital control - Cutting width adjustable from 3mm to 15mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Rated power 0.9 kW - Years of construction 2007 to 2012 External dimensions : width 80cm depth 70cm height 112cm
working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h
RECON valve bridge inlet and outlet MAK M43B and M43C MAK Part Number Inlet: 433515-100 MAK Part Number Outlet: 433515-200
Humidification and sprinkling • Brand: Minipan • Lattice inlet and outlet belt • Humidification: in the spray system • Sprinkling: with various grit • Band width: 650mm • Machine length: approx. 2500mm • Speed: adjustable • Condition: technically tested
Ramon 40 liter cutter, 2 speeds, bowl stainless steel, function tested
Brotschneidemaschine verwendet. Sehr guter Zustand.
Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)
Size Dn 350 Pressure class Pn10/16 A150 Body Steel Gjs 400 used Tractor No. B21-047508 Disc Stainless steel Cf 8m P.max bar 16 Bar Temp Min -10 Max 130 Pneumatic double acting Year of construction 2021 Epdm session
Sollas Bandum 25, untested, as spare part donor
Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg
WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system
Sollas SB 380 stretchbanding machine, pack size min. 50 x 15 x 20 mm (LxWxH), max. 210 x 250 x 150 mm (LxWxH), capacity up to 30 single or bundle packs per minute.
SECOND-HAND CN SANDING LINE FOR STRAIGHT AND CURVED ELEMENTS OMEF MOD. FUTURE -Loader - 2 Top Transversal Horizontal Belts - 2 Bottom Transversal Horizontal Belts - 1 top horizontal longitudinal pneumatic roller - 1 bottom horizontal longitudinal pneumatic roller - 2 Right Vertical Transversal Belts - 2 Left Vertical Transversal Belts - 1 right longitudinal pneumatic roller - 1 left longitudinal pneumatic roller - 2 Orbital Sanders - CE rules - Year 2000
Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...
We offer for sale a Cummins gas CHP 2000 KW. Specifications Engine: Cummins Type: D67 Power: 2000 KW Year of construction: 2007 Revolution: 1500 1/min Generator: Stamford Power: 2650 KVA Voltage: 380 V Frequency: 50 Hz Operating hours: 59,000 h
Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control
Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.
Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.
Seydelmann K 204 DC 8 with ejector and feed, stainless steel bowl, tested function
1 HORST KIND label cut and fold machine type UNI 2000 E year 1988
1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)
1 HORST KIND label cut and fold machine type ECO 2015, year 2014
Name: Sprout punch Manufacturer: Schleicher, 8192 Gerelsried/Obb. Machine number: 8922 Year of construction: 1985 Condition: used, completely revised and tested - pneumatically operated rung punch - working height (cutting height): approx. 150 mm - working width (cutting width): approx. 120 mm - Width (incl. table extensions): 1520 mm - Depth: 600 mm - Height: 1120 mm - Two-hand operation - with angle stop - with length display (ruler) - with adjustable supports for processing palatine strips - Compressed air connection: 5 bar - dust-free working - Table extension left + right (removable) - Stops left + right removable - adjustable for single miter 90° and double miter 45° - 1 x sliding stop Transport dimensions (W x D x H): 1520 x 700 x 1370 mm on pallet Weight: 95 kg (incl. pallet) (Changes and errors regarding technical data and prices excepted!) In ...
maximum number of results exceeded
please refine your search
