vertical boring used for sale

Function: stainless steel tank from the premix making area Construction: vertical cylindrical stainless steel tank on a four-leg frame, manway in the shell, dished bottom with outlet, valve and pipework Plant tag: TK2 Manufacturer plate: Alliance Inox Industrie, Beychac et Caillau (France), cuves et reacteurs, CE marked Alliance 25,000L Stainless Steel Tank Auction-ID: A1-51927-239

Mecalux mobile shelving Mobile shelving units with handwheel drive Shelves 1,250 mm long, max. 110 kg per shelf 8 shelf levels, frames M3, max. 990 kg per module Supplied 2018 Sold as shown in the photos. Auction-ID: A1-51927-333

Carlier CITP fiberglass reinforced composite (GRP) Chemical Storage tank 50 m³ capacity Suitable for Sodium Hypochlorite 3.6% Auction-ID: A1-51927-170

LYON-FLEX vertical chain mortising machine, intended for slotting wood. Frame with slotting head, work table, clamps and visible manual adjustments. Manufacturer: LYON-FLEX S.A. Year: 1985 Serial No.: 8999 Equipment: slotting chain, adjustable table and clamping devices Visual condition: second-hand workshop machine with visible signs of use. Auction-ID: A1-51903-4208

Mecalux conventional pallet racking with mesh back panels Load plate: Europallet 800 × 1200 mm, max. 900 kg per pallet, 3 pallets per level Beams 2C S1115 (2,700 mm, max. 3,400 kg per level) and 2C S1315 (3,600 mm, max. 2,700 kg per level) Frames P80, max. 10,200 / 8,100 kg per bay Supplied 2020, inspection label 2024 Sold as shown in the photos. Auction-ID: A1-51927-318

Mecalux drive-in (compact) pallet racking Load plate: pallets 1200 × 1200 mm, max. 500 kg per pallet 12 lanes, 6 pallets deep per lane Lane width 1,450 mm, depth 7,500 mm, max. 9,000 kg per lane Frames P101, max. 18,000 kg per module Supplied 2020, inspection label 2024 Sold as shown in the photos. Auction-ID: A1-51927-316

Equipped with: Saw blade for aluminum, power 1.5kw, V 3-phase 50 Hz, 1.5 kW, maximum cutting capacity 508 × 330 mm, variable belt speed 55–5,200 ft/min, saw band length 3,912 mm, tilting work table approx. 660 × 660 mm Auction-ID: A1-47369-1753

Thimonier OZA 2000 Vertical Form Fill & Seal Machine 50500 mL berlingot pouches Auction-ID: A1-51927-16

Thimonier OZA 2000 Vertical Form Fill & Seal Machine 50500 mL berlingot pouches Auction-ID: A1-51927-17

Mecalux conventional pallet racking Load plate: pallets 800 × 1200 mm, max. 650 kg per pallet location Beams 2,700 mm and 3,600 mm, max. 2,600 kg per level Ground + 3 levels, max. 7,800 kg per bay Installed 2005, inspection label 2024 Sold as shown in the photos. Auction-ID: A1-51927-317

New Anthracite Double-Leaf Vertical Slat Gate A modern and durable double-leaf gate manufactured from high-quality steel profiles, finished in an elegant anthracite color. The vertical slat (comb-style) design ensures both aesthetic appeal and structural strength, making it suitable for residential and commercial applications. Specification: Gate type: double-leaf, vertical slat (comb-style) Leaf construction: steel profiles 60 mm ×40 mm Posts: 100×100 mm, height 2 200 mm Finish: anthracite (powder-coated) Included: 2 × gate leaves 2 × steel posts 4 × adjustable hinges 1 × gate stop Packaging: The gate is securely packed on a wooden pallet and prepared for safe transport. Auction-ID: A1-51511-56

Thimonier OZA 2000 Vertical Form Fill & Seal Machine 50500 mL berlingot pouches Auction-ID: A1-51927-15

New Anthracite Double-Leaf Vertical Slat Gate A modern and durable double-leaf gate manufactured from high-quality steel profiles, finished in an elegant anthracite color. The vertical slat (comb-style) design ensures both aesthetic appeal and structural strength, making it suitable for residential and commercial applications. Specification: Gate type: double-leaf, vertical slat (comb-style) Leaf construction: steel profiles 60 mm ×40 mm Posts: 100×100 mm, height 2 200 mm Finish: anthracite (powder-coated) Included: 2 × gate leaves 2 × steel posts 4 × adjustable hinges 1 × gate stop Packaging: The gate is securely packed on a wooden pallet and prepared for safe transport. Auction-ID: A1-51511-30

Table size 520x420 mm, incl. spare saw blades Auction-ID: A1-51634-27

Thimonier High-Frequency Vertical Form Fill & Seal Machine 30-60 BPM Auction-ID: A1-51927-30

Thimonier OZA 2000 Vertical Form Fill & Seal Machine 50500 mL berlingot pouches High-frequency RF sealing Auction-ID: A1-51927-18

Brunetti SEC810V / FRP810 II vertical continuous bag sealer, with inkjet printer for date and batch coding. New equipment, in original box. Net dimensions: 954 x 400 x 548 mm. Net weight: 40 kg. Auction-ID: A7-51454-27

Thimonier High-Frequency Vertical Form Fill & Seal Machine 30-60 BPM Auction-ID: A1-51927-29

Mecalux conventional pallet racking Blue uprights and orange beams Load plate: Europallet 1200 × 800 mm, max. 600 kg per pallet, 3 pallets per level Beams 2C-S1015, length 2,700 mm, max. 1,800 kg per level Frames P80, max. 5,400 kg per bay Supplied 2020, inspection label 2024 Sold as shown in the photos. Auction-ID: A1-51927-315

Thimonier High-Frequency Vertical Form Fill & Seal Machine 30-60 BPM Auction-ID: A1-51927-27

CHIRON MODEL FZ18W MAGNUM 4 axis Vertical machining center with rotopallet and double 4th axis 20 TOOLS ISO 40 Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kW X = 625 Y = 400 Z = 400 Rapids 40m/min Table area: 2 x 900 x 470 - TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos. - original HAWE hydraulic unit - FANUC 0M 1995 Can be inspected under power in our warehouse Mimu machine tools (Italy), X: 625, Y: 400, Z: 600, 4th axis: Yes, (2x) Tsudakoma 360 000 pos.

ACMA vertical woodworking band saw, model 700 saw , with saw table and adjustable blade guide. Manufacturer: ACMA – Ateliers de constructions mécaniques d'Annecy Model: 700 mm saw Equipment: sawing table, adjustable blade guide and band saw handwheels Visual condition: used workshop machine with visible signs of use. Auction-ID: A1-51903-4209

Function: stainless steel tank from the premix making area Construction: vertical cylindrical stainless steel tank on a four-leg frame, manway in the shell, dished bottom with outlet, valve and pipework Plant tag: TK1 Product label: oxyde de lauryl dimethylamine Manufacturer plate: Alliance Inox Industrie, Beychac et Caillau (France), cuves et reacteurs, CE marked Comparable equipment: Alliance 25,000L Stainless Steel Tank Auction-ID: A1-51927-238

X-axis travel: 1016mm, Y-axis travel: 610mm, Z-axis travel: 760mm, distance from spindle nose to pallet: 150-910mm, distance from spindle axis to column: 635mm, distance from spindle axis to front of machine: 820mm, distance from table to floor: 959mm, working surface dimensions: 1270x590mm, number of T-slots: 5, T-slot width: 18mm, center T-slot dimensions: 18 H6 mm, centering bore diameter: 30 H6 mm, T-slot spacing: 125mm, max. table load: 1350kg, working feed rate: 0-15m/min, max. programmable feed rate: 40m/min, rapid traverse speed: 40m/min, acceleration: 5m/s², max. spindle speed: 10,000rpm, control system: HEIDENHAIN, length: 2750mm, width: 2120mm, height: 2100mm, weight: approx. 7.7t, operational hours counter: approx. 17,000h, including documentation. An on-site inspection is possible.

CNC Vertical Machining Center Lagun MC 7638 Manufacturer: Lagun (Ladislao Aramburu S.A., Spain) Type: MC 7638 Serial No.: 37372 Year: 1995 CNC with display Total power: 10.5 kW Loading is provided by the seller; mandatory charging fees apply. Auction-ID: A1-51946-16

Rated flow approx. 302 m³/h, head approx. 43 m, maximum head 53 m, 37 kW motor, 400/690 V, IP68. Auction-ID: A1-51692-484

The unit is designed for handling and conditioning pre-treated wood chips in a pressurized steam process. It features a vertical cylindrical vessel with domed bolted cover, top and side process connections, inspection/service openings, protective screens and a lower discharge or expansion connection. The equipment is offered as an individual process segment and forms part of the complete ANDRITZ ATMP line, together with refiners, impregnation equipment, conveyors, pressure vessels, separation equipment and auxiliary systems. The unit is described as unused and stored in warehouse condition. The exact model, pressure rating, internal arrangement, instrumentation and included accessories must be verified by the buyer from physical inspection. The buyer must verify compatibility with the intended process, including piping, valves, instrumentation, controls, discharge equipment and pressu ...

equipped with band saw welding unit, Auction-ID: A1-50597-142

Hurco BMC 2416 CNC Vertical Machining Center Manufacturer: Hurco Model: BMC 2416/DSM Serial No.: V10050374 Year: 2000 Hurco CNC (Dual Screen, Trackball) Yaskawa Varispeed 626VM3 Spindle Drive Yaskawa Servopack Servo Drives Loading is provided by the seller; mandatory loading charges apply. Auction-ID: A1-51946-14

Mori Seiki SV-500 CNC Vertical Machining Center Manufacturer: Mori Seiki Model: SV-500 Numerical Control: Mori Seiki MSC-502 Chip Conveyor Lubrication Unit 3-Color Light Column Loading is provided by the seller; mandatory loading charges apply. Auction-ID: A1-51946-12

Automatic alternating motion cartoning machine for vials, tubes, jars, blister packs, etc. Equipped: - Store pre-folded cases - Suction cup gripping of the cases - Chain with cleats for transferring cases - Closing station for the bottom of the cases - Pre-folded leaflet store - Spoon magazine - Automatic product introduction station with pick and place system - Closing station for the top of the cases - Evacuation of finished cartons on conveyor - General drive by motor-variator - Venturi for vacuum - Protective housing with safety Capacity: Case dimensions: Length: minimum (pitch) 40 mm - maximum 120 mm Width: minimum 40 mm - maximum 90 mm Height: minimum 50 mm - maximum 190 mm Maximum production: 40 cartons/minute Total electrical power: 4 kW Pressure: 6 bar Auction-ID: A1-51318-314

Laminar flow hood with stainless steel worktable for control or development labs. Equipped: - 1 H14 filter. Dimensions: 820 x 450 x 68 mm - 1 H14 filter. Dimensions: 610 x 305 x 68 mm - 1 turbine power 1100 watts at 1300 rpm Worktable length 900 mm - width 400 mm Glass Half Door To be placed on a bench or base Auction-ID: A1-51318-296

Hurco VMX50 CNC Vertical Machining Center Manufacturer: Hurco Model: VMX50 Numerical Control: Hurco Ultimax (Dual Screen, French Interface) Electronic Crank and Joystick Tool Changer Grooved Table Loading is insured by the seller; mandatory loading fees apply. Auction-ID: A1-51946-11

Hurco BMC-30M CNC Vertical Machining Center Manufacturer: Hurco Model: BMC-30M Serial No.: B3M92108096AC Numerical Control: Hurco Ultimax 3 (Dual Screen, Keypad in French) Carousel Tool Changer Siemens Simodrive 611 Drives Power Supply: 380 V – Three Phase – 50 Hz – 14 kVA Charging is provided by the seller and mandatory charging fees apply. Auction-ID: A1-51946-15

Chiron FZ 18 W Magnum Vertical Machining Center with Nikken Tilting Divider Manufacturer: Chiron (Germany) Model: FZ 18 W Magnum Year: 1994 Numerical Control: GE Fanuc Series 0-M Nikken Tilting Divider (Turntable on Tilting Cradle) 2 Nikken α Controls, including \"Tilting Axis\" Tilting Table Pierced Chiron Operator Console Light Column Loading is provided by the seller; mandatory loading fees apply. Auction-ID: A1-51946-13

Nodier Emag VL 3 CNC Vertical Lathe Manufacturer: Nodier Emag Model: VL 3 Year: 2008 Numerical Control: GE Fanuc Series 18i-TB Tool Turret Circular Parts Conveyor Electronic Hand Crank Loading is provided by the seller; mandatory loading fees apply. Auction-ID: A1-51946-17

The unit is designed for handling and conditioning pre-treated wood chips in a pressurized steam process. It features a vertical cylindrical vessel with domed bolted cover, top and side process connections, inspection/service openings, protective screens and a lower discharge or expansion connection. The equipment is offered as an individual process segment and forms part of the complete ANDRITZ ATMP line, together with refiners, impregnation equipment, conveyors, pressure vessels, separation equipment and auxiliary systems. The unit is described as unused and stored in warehouse condition. The exact model, pressure rating, internal arrangement, instrumentation and included accessories must be verified by the buyer from physical inspection. The buyer must verify compatibility with the intended process, including piping, valves, instrumentation, controls, discharge equipment and pressu ...

Semi-automatic alternating motion cartoning machine for vials, tubes, jars, blister packs, etc... Equipped: - Store pre-folded cases. - Sheathing by saber. - Chain with cleats for transferring cases. - Closing station for the bottom of the cases. - Manually introduced product entry station by one or two operators. - Closing station for the top of the cases. - Disposal of finished cases. - General drive by motor-variator. - Protective housing with safety. Capacity: Case dimensions: Minimum length (pitch) 20 mm - maximum 115 mm Minimum width 15 mm - maximum 70 mm Minimum height 50 mm - maximum 190 mm Maximum production: 60 cartons/minute Total electrical power: 1 kw Auction-ID: A1-51318-315

x-travel:800 mm y-travel:410 mm z-travel:510 mm control:Fanuc 10 MA rapid travel x/y/z:20/20/15 mm/min table surface area:1100 x 450 mm tool taper:BT 40 tool magazin::30 BT 40 max. tool length:250 mm max. tool weight:8 kg power requirement:7,5/5,5 kW turning speed range:6000 1/min weight of the machine ca.:6,3 t Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup"

x-travel:1100 mm y-travel:600 mm z-travel:510 mm control:Heidenhain iTNC 530 table-size:1050 x 600 mm table load:500 kg spindle taper:SK 40 turning speeds:10000 1/min power capacity at 100 % load:9 kW rapid travel x/y/z:24 m/min feed:24 m/min Tool changer:40 SK 40 dimensions of the machine ca.:4,3 x 2,6 x 2,25 m weight of the machine ca.:8,8 t POS mill 1100 vertical machining center in very good condition from 2009 Options: - parts measuring M&H receiver without probe - external hand wheel Heidenhain HR 410 - Air supply through spindle - air gun - paperfilter system with coolant through spindle 40 bar -

x-travel:800 mm y-travel:510 mm z-travel:510 mm control:Fanuc MSC 518 Spindle RPM:10.000 1/min spindle drive:22/18,5 kW rapid travel x/y/z:32 m/min table-size:1120 x 600 mm tool changing time:0,9 sec tool magazin::30 x BT 40 total power requirement:51 kW weight of the machine ca.:8,8 t

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

x-travel:800 mm y-travel:400 mm z-travel:350 mm total power requirement:44 kW weight of the machine ca.:8,8 t dimensions of the machine ca.:6,1 x 4,1 x 3,3 m tool taper:HSK63 number of spindle speeds:36-12.000 Number of tools:2 x 21 St. rotary table diameter:1340 mm

weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

turning diameter:250 mm swing diameter:250 mm turning height:200 mm total power requirement:37,7 kW chuck diameter:315 mm spindle speed max.:5500 1/min travel -x axis:625 mm travel -y axis:+100/-80 mm travel -z axis:250 mm worktool system:VDI 30+40 weight of the machine ca.:8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024