136,136 used machines on RESALE, but how to find them? Machine Search
X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible.
x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm spindle turning speed range: 80-2200 U/min table-size: 600 x 200 mm dimensions of the machine ca.: 1400 x 1150 x 1600 mmxmmxmm weight of the machine ca.: 0.6 t misc. accessories: Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HEYLIGENSTAEDT HEYMUNILL 3200-P in heavy-duty portal design with fixed crossrail, suitable for machining large and heavy workpieces. Large working area with travels of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, as well as a table size of approx. 5,000 x 3,000 mm and a table load capacity of approx. 50,000 kg. Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads A- and B-axis (swivel axes in the milling head) C-axis (360° rotation) Simultaneous 5-axis machining possible (with fork head) Milling heads: Straight milling head FK 120/340 90° angle head WFK 100/750M Fork head FK 100/2D Milling head magazine: 5 positions Automatic milling head change Additional equipment: Internal cooling (IKZ) approx. 7 bar Tool changer 32 positions (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool measuring system (laser) Chip conveyor Coolant system Adaptive feed ...
x-travel: 560 mm y-travel: 320 mm z-travel: 400 mm table-size: 950 x 450 mm table load: 300 - 350 kg tool adaptor: ISO 40 turning speeds: 25 – 2000 / 2240 U/min quill stroke: 95-100 mm vertical head swivelling: 90 Grad rapid traverse: 1400 mm/min total power requirement: 2,8 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,8 x 1,6 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
POS POSmill H 800 U – 5-axis machining center The machine is designed as a 5-axis machining center and features a swivel axis with a range of -120° to +120°, as well as a rotary table with a continuously rotating 360° C-axis. A separate A-axis is not available. The working area is realized by a high-quality Kessler rotary table with a diameter of 800 mm. The machine is not equipped with a pallet changer. A key highlight is the 96-position tool changer, making the machine ideal for series production as well as complex machining tasks. In combination with the integrated through-spindle coolant system (IKZ) with 50 bar, the machine is well suited for demanding applications in toolmaking and the automotive industry. Operating data: Control ON: approx. 25,280 h Machine ON: approx. 24,730 h Program run: approx. 9,150 h Spindle hours: approx. 8,555 h
x-travel: 300-320 mm y-travel: 240-270 mm z-travel: 300-310 mm table-size: 670 x 320 mm tool adaptor: ISO 40 turning speeds: 45-2240 U/min quill stroke: 60 mm head swivability: 360 ° feed: 12,5 - 630 mm/U rapid traverse: 1200 mm/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1,265 x 1,08 x 1,62 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300-320 mm y-travel: 240-270 mm z-travel: 300-310 mm table-size: 670 x 320 mm tool adaptor: ISO 40 turning speeds: 45-2240 U/min quill stroke: 60 mm head swivability: 360 ° feed: 12,5 - 630 mm/U total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 550 mm, 1500 mm
Mixing mill 550 × 1500 mm, manufactured by Bata in 1937. This historic machine is fully functional and can be used both in production and as an exhibition piece.
Thread milling machine WMW GFL 400x2000 with change gears.
Used colloid mill made by Młynkol type MK300. New 2014. Capacity: 300 kg/h.
A total of two identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l, year of manufacture: 2015/2020. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.
Control Siemens ... Sinumerik 840D Sl Clamping table surface ... Diameter 1200mm Axis X ... 2200mm Stand passage... 2125mm Axis Y ... 2425mm Axis Z ... 1000mm Max.table load ... 6000kg Rapid traverse ... X,Y,Z 15 000m/min Total power requirement ... 110kVA Number of positions in the tool changer ... 100 Max. tool weight ... 15kg IKZ ... 60bar Machine weight ... 50000kg Spindle speed 12000 rpm Spindle mount. HSK 100T Workpiece Probe Renishaw OMP 60 Tool Probe Renishaw TS 27R Rinsing gun Handwheel 3x chip conveyor Documentation The machine is in good condition, possible to test under power.
Chiron FZ16e CNC Milling Machine Milling Machine Tool Milling Machine Manufacturer [manufacturer]: Chiron Werke Type [ type]: FZ16e Construction year: 1987 Control unit: Siemens Sinumerik System 3 Travel X/Y/Z approx. 500 × 250 × 425 mm Table size approx. 850 × 550 mm Table load approx. 200 kg Spindle speed 20–7,100 rpm Spindle power 4.8–5.7 kW Tool holder SK30 Tool magazine 12–32 Tools Rapid traverse X/Y/Z approx. 15 m/min Weight [weight]: approx. 3.500kg Good, working condition -without vice -Various accessories available -Monitor new Viewing can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. If you have any questions or would li ...
This 5-axis SHW UFZ 6L Bed Type Milling Machine was manufactured in 2008. It features an impressive X-axis travel of 6000 mm, Y-axis travel of 2100 mm, and Z-axis travel of 1600 mm. The machine includes an automatic tool changer with a capacity for 150 tools and a robust clamping plate surface of 3600 x 3750 mm. If you are looking to get high-quality milling capabilities, consider the SHW UFZ 6L machine we have for sale. Contact us for further details.
Used Hammer Mill Grain Mill Manufacturer: VEB Fortschritt Type: GM 401 Capacity max 1.2 tons per hour Engine 18.5 kW 3000 rpm 380/660 V with blower Overall dimensions: approx. 1800 x 800 x 1100 mm These mills are used to shred free-flowing bulk materials such as grain, pet food and animal feed. Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Complete factory for producing feed pellets: Bühler DPUC 160kw pellet mill Geelen 19x24 pellet cooler Sprout Matador 90kw Hammer mill Sprout Matador 4000l blender Sprout Matador Crumbler Novidan Sifter for pellets 2x bucket elevators 2x screw conveyors
Weight: 1.5t, operating hours unknown, with documentation, machine vices and fixtures are available as accessories, the machine ran in one shift operation and was serviced regularly. An inspection on site is possible.
Key data: 7200 mm, 4100 mm, 1250 mm
Control Heidenhain ... TNC7 Clamping table surface ... 6000x2900mm Axis X ... 7200mm Stand passage ... 3200mm Axis Y ... 4100mm Axis Z ... 1250mm Axis W ... 1600 mm Spindle speed... 0-3000 rpm. Max. table load ... 20 000kg The machine has undergone a complete overhaul. More info on request, new Fermat headstock new UHAmi 30 milling head CE new electrics and hydraulics new HH TNC 7 controller new digital display HH New linear guide new ball screws cooling New tool changer device
Key data: 4000 mm, 2700 mm, 1250 mm
Control Heidenhain ... TNC 640 Clamping pond area ... 4000x2000mm Axis X ... 4000mm Stand passage ... 2500mm Passage between the table and the crossbeam... 1890mm Axis Y ... 2700mm Axis Z ... 1250mm Spindle speed... 0-5500 rpm. Max. table load... 15 000kg The machine is after the general overhaul. More info on request. new Fermat headstock new electrics and hydraulics new digital display HH New linear guide new ball screws cooling CE Options: Tool changer setup Swivel Heads
Key data: 4200 mm, 2300 mm, 1250 mm
Control Siemens ... Sinumerik 840 D Clamping table surface ... 1600x4000mm Axis X ... 4200mm Stand passage... 2100mm Max. table load ... 10 000kg Axis Y ... 2300mm Axis Z ... 1250mm Spindle mount... ISO 50 Spindle speed ... 40-6000 rpm Max. spindle torque ... 1050/1435Nm Rapid traverse ... 10m/min Main engine power ... 30/41kW Total power requirement ... 79kVA Machine weight ... 51000kg L x W x H ... 10480 x 5200 x 6120mm Incl. milling heads - C50 and N75 The machine is in good condition, possible to test under power.
Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg
Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg
This 9-axis Muratec MT 25 MY was manufactured in 2001. It features a maximum machining diameter of 370 mm and a maximum machining length of 920 mm. The machine is equipped with twin spindles and twin turrets, offering 15 live tooling stations per turret. If you are looking to get high-quality turning capabilities, consider the Muratec MT 25 MY turn-mill centre we have for sale. Contact us for further details.
A Deckel engraving and copy milling machine is available. Table dimensions X/Y: 350mm/200mm, travel X/Y: 300mm/150mm, machine dimensions X/Y/Z: approx. 1100mm/1300mm/1500mm, weight: approx. 500kg. An on-site inspection is possible.
CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used - : Price ex location: 23.500.-€ (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMONSTRATION MACHINE Three-axis milling machine in flatbed gantry design. Working paths X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame wag Bortal: Design as a solid, stress-free, completely welded slahl construction, powder-coated. Heavy table base to accommodate the VAC-CAISSON vacuum table, designed as a cassette, air passage holes in a grid of 10 mm. Feed speed: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, sliding shoes with upstream ball circulation. Transmission : Precision Ball Screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeatability: +/- 0.025 mm Mechanic ...
A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement.
This 5-axis WALDRICH COBURG 17-10 FP NC/5 was manufactured in 1985 and lastly retrofitted in 2011. It features a maximum workpiece weight of 60 tons and a substantial table size of 2,500 mm by 5,000 mm. The machine is equipped with a Sinumerik 840 control system, ensuring precision in operations. If you are looking to get high-quality milling capabilities, consider the WALDRICH COBURG 17-10 FP NC/5 gantry milling machine we have for sale. Contact us for further details.
Dear Ladies and Gentlemen, at the Bruchsal location we offer a used machine for sale without obligation: Worm Gear Milling Machine Gear Shaping Machine Manufacturer: Gleason Pfauter Type: GP200 Year of Make: 2002 Weight: approx. 9.7 t If you are interested, please leave us an offer until 15.06.2026, taking into account the following points: If you have any questions or would like to arrange a viewing appointment (from 01.06.2026), please do not hesitate to contact us.
Inv. Num. : 9154 Type: 17-10 FP NC/5 Producer: Waldrich Coburg Created: 1985, GO 2011 Parameters: Operating system: Sinumerik 840 Table length: 5000 mm Table width: 2500 mm Max. workpiece weight: 60000 kg Weight: 125000 kg Coolant leaks out in the spindle area of the machine. GOs were carried out on the machine in 1997/2008/2011.
A tool milling machine is offered. Travel range X/Y: approx. 400mm/200mm, spindle speed: 224-2240rpm (6 steps), feeds: 0.10-0.71mm/rev, tool holder: MT/SK, control: manual. Equipped with vertical milling head, adjustable compound table, mechanical handwheels. Inspection possible by arrangement.
module: 10 diameter: 180 mm Bore diameter: 40 mm width: 75 mm : 2 weight: 14 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
module: 4 diameter: 180 mm Bore diameter: 40 mm width: 67 mm : 5 weight: 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis PORTIC VTEC gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 2,000 x 1,300 mm and a maximum workpiece weight capacity of 8,000 kg. If you are looking to get high-quality milling capabilities, consider the PORTIC VTEC gantry milling machine we have for sale. Contact us for further details.
Includes selection of BT30 holders and Digital tool Setter and 3d Haimler. Great machine, little use and always on aluminium. Can be seen running. 16 Position Arm type ATC and LNC Control (I have fusion 360 post as well.) Great machine for small workshop or as we had for home use.Table Size: 700x300 mmT-Slots (Number x Size x Distance): 3x14x100 mmMax. Table Load: 150 kgX Travel: 400 mmY Travel: 300 mmZ Travel: 380 mmDistance between spindle end and tabletop: 150-530 mmDistance between spindle and column surface: 358 mmBT30 10,000 RPM spindle.
Has a 14" wide by 7.5" depth working limits. Works great with no issues! Features listed below. -10 tool ATC Automatic Tool Changer -Power Draw Bar -Flood coolant -Fog Buster Coolant -All Tool holders and Tooling shown in pictures. -4th Axis w/ 4 jaw chuck -Vise -One way needle bearing tool holder for tightening and loosening tools (fabricated on this machine in picture) -Tool chest with everything in it. (endmills, tool holders, fixturing, tool setting, lubricants)
Key data: 2
Wigo Copy Milling Machine Type: 1075 1 milling motor each on the right and left 5.5 kW each Spindle diameter 30 mm Milling spindles run in the same and counter-rotation Running direction can be switched Milling process via scanning with thrust ring Working length max. 1400 mm Working width max. 210 mm Working height max. 90 mm 2 pneumatic clamping cylinders from above 2 x pneumatic side pressure with 2 straight milling heads milling height 50 mm Dimensions Length 3200 mm x W 1200 mm x H 1600 mm Weight approx: 1000 kg
For sale is a high-quality CNC turning-milling center spinner TC77-SMCY with Siemens Sinumerik control. The machine is equipped with: Y-axis C-axis Sub-spindle powered tools Chip conveyor extensive tool package Technical data: Bar passage 77 mm 12-speed VDI50 turret Main spindle ASA 8 Sub-spindle ASA 6 Speed up to 4000 rpm Turning diameter approx. 500–690 mm Turning length approx. 800–900 mm Y-axis ±60 mm Main and sub-spindle Weight approx. 6000–7000 kg Nloc Egsy Uwmws S Rrgob
Incl. chip conveyor Dimensions: 3700x2270x2820mm Chip conveyor dimensions: 800x4000x1500mm Condition and details see pictures Year of manufacture 1996
This HWACHEON VT550R was manufactured in 2008. It features a hydraulic chuck diameter of 500 mm, a maximum turning diameter of 650 mm, and a spindle speed up to 1,500 RPM. The machine includes a 12-position turret and a chip conveyor, ensuring efficient operation. Consider the opportunity to buy this HWACHEON VT550R turn-mill centre. Contact us for more information about this machine.
Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-groomed operation and impresses with the proverbial micron precision as well as the generous working range (up to 900 mm travel in X). It is ideal for toolmaking, prototyping, training or demanding repair shops. Technical data at a glance (manufacturer's specifications): Working range & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Working spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main Drive & Feed: Drive power spindle: 11 kW (at 44% ED) / 7.5 kW (at 100% ED) Feed speed (X, Y): 0 – 10,000 mm/min (programmable) Feed speed (Z): 0 – 8,000 mm/min ...
Mikron WF 41C CNC Universal Milling and Drilling Machine Professional, extremely robust CNC universal milling and drilling machine MIKRON WF 41C Due to its stable design, the machine is ideal for workshops, prototype construction, maintenance or demanding toolmaking. The machine is equipped with the proven HEIDENHAIN TNC 155 web control system Thanks to plain text dialog guidance, it is extremely easy to program directly on the machine, masters graphical simulations and allows easy loading of external CNC programs via the serial interface (ideal for CAD/CAM use). Technical data at a glance CNC control Model: HEIDENHAIN TNC 155 Operating modes: manual operation (such as digital display), positioning with manual input, single set, sentence sequence, program test (graphic simulation) Interface: V.24/RS-232-C for data transmission Feed Drives & Travel Paths Travel ...
This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine.
CNC turning and milling center Okuma Multus B400 1SC-1500 Control: OSP-P200L Year of manufacture: 11/2010 Internal machine no. 61 X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Z-axis: 1,545 mm B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40-fold Equipment: - Chip conveyors - 3-jaw chuck SMW KNCS-N-340-117 - Paper belt filter system ISF 540/6670 - One Touch IGF - Tailstock - Touchsetter
Travels: X-axis 500 mm, Y-axis 200 mm, Z-axis 400 mm Tool holder SK 40, spindle speed 40-2000 rpm, Table clamping area 830 x 240 mm, weight of the machine 1,100 kg Equipment and accessories: • Vertical milling head with quill • Feeds and rapid traverse in all 3-axes • Various tool holders, collets • Hydraulic vise • Coolant device • Documentation • Bellows damaged
Universal Tool Milling Machine Fritz Werner Type 5130 Extremely robust and precise universal tool milling machine from the traditional German quality manufacturer Fritz Werner (model 5130) This conventional bracket milling machine impresses with its solid grey cast iron design and maximum reliability. It is ideal for workshops, toolmaking, repair shops, demanding do-it-yourselfers or training institutions. The machine has a swivelling vertical milling head with manual quill feed (perfect for additional drilling work) as well as a mechanical feed gear. An absolute highlight is the retrofitted premium safety spindle protection from Tecno Più Technical data at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Type: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with tightening rod) Table d ...
x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table surface area: 600 x 200 mm spindle taper: SK 30 spindle turning speed range: 80 - 2200 U/min feeds X-axis: 50 - 550 mm/min feeds Y-axis: 50 - 550 mm/min rapid traverse: 1500 mm/min quill stroke: 45 mm vertical head swivelling: +/- 90 ° total power requirement: 1,4 kW weight of the machine ca.: 500 kg dimensions of machine L x W x H: 1,50 x 1,20 x 1,60 m Accessories: DRO on 3 axis HEIDENHAIN, solid table, vertical head with quill retraction, counter bearing, various short and long tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
POS PosMill Type C1050 – Universal Milling Machine Universal milling machine with travel paths X 1,050 mm / Y 530 mm / Z 630 mm and table size 1,150 x 560 mm. CNC control HEIDENHAIN iTNC 530. Hydraulic system for precise movements. Equipment: Coolant system and chip conveyor. Machine with protective devices and emergency stop system.
maximum number of results exceeded
please refine your search
