vertical boring mill used for sale

Auction-ID: A1-50076-310

64 pieces Auction-ID: A1-50076-277

For sale is the four-roller grist mill of the Seeger brand, which can be seen in the pictures The mill was in use in a brewery until the end and is functional. The bearing has already been overhauled on the predecessor. Specifications: Manufacturer: Seeger Model: VSM 350 Capacity: 750 kg/h Measurements: see last picture

For Sale Used Corundum Disc Mill / Mustard Mill MK95

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg

- Fast comminution with rotational speeds up to 400 rpm - Loss-free grinding even below 1 μm - Uniform fine comminution of large sample amounts - Safe tensioning of the bowls with Safe-Lock-System - Useful capacity up to 4 x 225 ml Currency; MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

Various diameters, maximum 400 mm; approximately 26 pieces; including pallet box Auction-ID: A1-49785-99

Various diameters; unused and in original packaging; 7 pieces Auction-ID: A1-49785-357

Spit F 40 slot milling machine including accessories and 3 milling machines, wall groove cutter Auction-ID: A1-50540-54

BAIER MF 63i Slot Milling Machine Wall Groove Milling Machine Auction-ID: A1-50540-115

Good condition Auction-ID: A1-50540-206

Impex ST-D70E Slot Milling Machine Wall Groove Milling Machine Auction-ID: A1-50540-67

15 pieces with setting machine and 3d probe Auction-ID: A1-50076-312

MAPAL heavy-duty CNC milling tool assembly with multiple replaceable indexable inserts and integrated machine-tool holder. Auction-ID: A7-50717-233

Lot of 6 assorted industrial milling cutters. Several are large indexable cutters fitted with replaceable cutting inserts. Visible markings include WALTER 280×30 WIDIA TH10, 280×30 A12, and IPR 250-1-16, ges. gesch. The lot also includes a large helical/form cutter. Auction-ID: A7-50717-212

Manufacturer: Otto Martin Maschinenbau, Ottobeuren Type: T23 Year of Make: 1978 Serial number: V 101199 Stationary Table Milling Machine / Spindle Milling Machine for Woodworking Manual height and milling settings Solid machine table with milling fence With mounted feeder from HOLZ-HER Feed apparatus for uniform workpiece feeding Extraction connection available Machine can be seen in the video machining a workpiece Auction-ID: A1-50370-8019

Mecanumeric Normaprofil T2515 CNC portal milling, year of construction 2009. Machine suitable for processing plastics, composites, wood, resins and non-ferrous metals such as aluminum. Equipped with a vacuum clamping table, automatic tool changer, CNC control and extraction connection. The machine has a gantry construction and is designed for processing large workpieces. The T2515 model has a working range of approximately 3,100 × 2,100 × 870 mm. The manual control and head changer on the right side are defective and need to be checked. ATTENTION The machine must be disassembled by the buyer himself. Auction-ID: A3-46133-34030

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

PICKLING LINES, TANDEM MILL, 18 ANNEALING FURNACES, TEMPER MILL, SLITTING LINES, SHOT BLAST MACHINE, STRIP WIDTH: 1000-1279 MM, ENTRY THICKNESS: 1.8 - 4.5 MM, EXIT THICKNESS: 0.7 MM

DANIELI, 1989, 550 T/DAY, BILLETS SQUARE: 130 x 6000 MM, REBARS: D8 - D14

ENTRY STRIP THICKNESS: MAX. 12 MM, EXIT THICKNESS: 1.8 MM, STRIP WIDTH: 1000 - 1500 MM, AGC SYSTEM (2000), COMPLETE LINE!

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Collin Two Roll Lab Mill, Roll size: 150mm dia x 400mm wide Hydraulic nip adjustment, Model: WALZWERKE 150, Year of manufacture: 1988, Power: 19kW Electric roll heating with oil - operating temp 50 to 220 C Each roll variable speed from 0 -30 rpm Manual lubrication, programable controls. In very good condition. Manuals/drawings available.

Material: steel Engine: 75 kW Pin-disk Capasity factor: F=ca. 6,3 Drive: 75 kw Speed: 4900 The machine is as good as new. You can also get the entire system with all components.

Weight 1750 kg Length x Width x Height 1800 mm x 1350 mm x 3000 mm Machine data: rotor diameter - knife circle : 500 mm length rotor : 630 mm angular speed rotor : appr. 650 min-1 after-run duration : appr. 60 sec. motor power - depent of order: 37 kW / 1500 min-1 45 kW / 1500 min-1 idle power :appr. 30 - 40 % of nominal power. Very good condition, ready to work. You can also get the entire system with all components.

Other data and price on inquiry. Do you need another machine or the whole arrangement? We have more than 1000 other used machines on stock. Please send us an email with your need.

Important and outstanding design features of the RaptorX-SL with steel substructure / gantry design RaptorX-SL1200/S20 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special size (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! To such a way that you are able to process plate materials with the greatest stability of the Z-axis exactly as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or water jet cutting system, are available In the middle range of the machine (between the foottubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm height ( at 400mm long F ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Material: steel Engine: 37 kW Weight: 900 kg Length x Width x Height: 1300 mm x 1000 mm x 900 mm Applicable for production of finest plastic-powder: - finest powder without use of nitrogen - best powder characteristic: best flow behaviour, high apparent density and narrow particle distribution - low grinding temperature, in terms of optimal ducting of the air - fully automatic continous operation - simple regluation of particle size. Throughput rate : 50 - 200 kg / h. Very good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Year: Mar 1972, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components.

Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...