vertical boring mill used for sale

This 3-axis CHIRON FZ 12 S High speed was manufactured in 1996. It features an X-axis travel of 550 mm, Y-axis travel of 330 mm, and Z-axis travel of 425 mm. The machine has a spindle speed of 12,000 rpm and a tool capacity of 12 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 12 S High speed vertical machining centre we have for sale. Contact us for further details.

Key data: 1050 mm, 530 mm, 510 mm

Control Mazatrol ... MATRIX 2 Clamping table surface ... 1300x550mm Axis X ... 1050mm Axis Y ... 530mm Axis Z ... 510mm Spindle speed... 10-12000r/min. controlled axes ... 3 cooling... 15bar ISO 40 Max. table load ... 1200kg Magazine slots ... 30 Machine weight ... 7700kg The machine is in good condition, possible to test under electricity.

This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and Y-axis travel of 500 mm, providing versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the EMCO MC 75-50 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine is equipped with a side mount tool changer with a capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details.

This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details.

This 3-axis MIKRON VF 3 vertical machining center was manufactured in 1998. It features a table size of 460 × 1,220 mm, with X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VF 3 machine we have for sale. Contact us for more information.

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

This 5-axis Matsuura MAM 72-63 V was manufactured in 2008. It features impressive travels with an X-axis of 760 mm, Y-axis of 845 mm, and Z-axis of 610 mm. The machine includes a maximum workpiece capacity of Ø800 mm × 450 mm height and a tool magazine with 150 positions. If you are looking to get high-quality machining capabilities, consider the Matsuura MAM 72-63 V vertical machining centre we have for sale. Contact us for further details.

This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Consider the opportunity to buy this HAAS UMC-750SS vertical machining center. Contact us for more information.

This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details.

This 3-axis Akira Seiki RMV 700 APC was manufactured in 2013. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 700 mm x 400 mm with a maximum load capacity of 160 kg. If you are looking to get high-quality machining capabilities, consider the Akira Seiki RMV 700 APC vertical machining centre we have for sale. Contact us for further details.

This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Rambaudi RF103 was manufactured in 2008. It features a maximum spindle speed of 18,000 rpm and a robust table size of 1,900 x 1,200 mm. The machine includes a tool changer with 24 positions, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Rambaudi RF103 vertical machining centre we have for sale. Contact us for further details.

This 3-axis DART VMC650 XL/A T.S was manufactured in 2000. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1000 × 500 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the DART VMC650 XL/A T.S vertical machining centre we have for sale. Contact us for further details.

This 4-axis FANUC Robodrill alpha-T21iFL was manufactured in 2008. It features impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine is capable of a spindle speed of 24,000 rpm and a maximum feed rate of 54,000 mm/min. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill alpha-T21iFL vertical machining centre we have for sale. Contact us for further details.

This 3-axis FAGIMA FAST 160 was manufactured in 1999. It features an X-axis travel of 1600 mm, Y-axis travel of 700 mm, and Z-axis travel of 700 mm. The machine includes a table size of 1800 × 700 mm with a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the FAGIMA FAST 160 vertical machining centre we have for sale. Contact us for further details.

standing PE tank, sulfuric acid tank. Flat bottom Volume: 16.7 m³ Dimensions: Ø 2.57 m x 3.90 m high

This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1300 x 570 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details.

standing GRP tank, polyester tank, with feet Volume: 35 m³ Dimensions: Ø 3.00 m x 5 m high

upright GRP tank, polyester tank, with bottle bottom, with two domes (on top of the tank and on the side of the spout) Volume: 40 m³ Dimensions: Ø 2.90 m x 6 m high

upright stainless steel tank with flat bottom Weight: 3 tons Volume: 43.5 m³ Dimensions: Ø 3.10 m × 6.15 m high

This 3-axis Johnford SV-41 was manufactured in 2010. It features a maximum spindle speed of 15,000 rpm and a work envelope of 1050 x 610 x 510 mm. The machine is equipped with a 40 taper for versatile tooling options. If you are looking to get high-quality machining capabilities, consider the Johnford SV-41 vertical machining centre we have for sale. Contact us for further details.

GRP tank standing on the skirt, polyester tank, reinforced, with inner coating with cone at the bottom, possible density: 1.3 kg /l Volume: 30 m³ Dimensions: Ø 2.85 m x 8 m high incl. skirt cylindrical length: 4.70 m

upright stainless steel tank, flat bottom Volume: 15 m³ Dimensions: Ø 2.60 m × 3.40 m high

This 3-axis MAKA DC 3 was manufactured in 2016. It features a spindle speed range of 18,000 rpm and impressive axis travels of 1645 mm in the X-axis, 1760 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a table size of 1200 x 1400 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the MAKA DC 3 vertical machining centre we have for sale. Contact us for further details.

This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2006. It features an X-axis travel of approximately 635 mm and operates on a supply voltage of 400 V, 3-phase. With a rated power of 35 kVA, this vertical machining centre is designed for efficient performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details.

This 3-axis DAH LIH MCV2600 was manufactured in 2006. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 870 mm, and Z-axis travel of 760 mm. The machine includes a robust table size of 2800 x 970 mm and a maximum speed of 6000 rpm. If you are looking to get high-quality machining capabilities, consider the DAH LIH MCV2600 vertical machining centre we have for sale. Contact us for further details.

This 5-axis SPINNER U5-620 was manufactured in 2008. It operates on a supply voltage of 400 V and a frequency of 50/60 Hz, with a nominal current of 50 A. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-620 vertical machining centre we have for sale. Contact us for further details.

upright stainless steel tank, incl. agitator Volume: 6 m³ Dimensions: Ø 2.24 m × 2.80 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank Volume: 6 m³ Dimensions: Ø 2.40 m × 1.90 m high

upright stainless steel tank, incl. agitator Volume: 3.3 m³ Dimensions: Ø 1.66 m × 2.50 m high incl. agitator, cylindrical height 1.54 m

This 5-axis DECKEL MAHO DMU 80 MonoBLOCK vertical machining center was manufactured in 2005. It features a 16,000 rpm spindle speed, a 40-slot tool changer, and an SK 40 tool holder. Equipped with an NC rotary table, a controlled B-axis in the milling head, and a chip conveyor, this machine is ideal for complex machining tasks. The DECKEL MAHO DMU 80 MonoBLOCK we have for sale is a robust choice for precision engineering. Contact us for more information.

This 3-axis Enshu S400 was manufactured in 1996. It features a working surface of 900 x 450 mm and a maximum workpiece weight of 800 kg. The machine is equipped with a spindle taper of MAS BT-40 and a tool magazine capacity of 20 slots. If you are looking to get high-quality machining capabilities, consider the Enshu S400 vertical machining centre we have for sale. Contact us for further details.

upright stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³

upright stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Outlet under the tank with flange Ø 4.5 cm Outlet at the bottom of the floor Ø 6.5 cm, without tap

This 3-axis KUNZMANN BA1400 was manufactured in 2017. It features a powerful 28 kW motor and a Heidenhain TNC 640 control unit. The machine has a table size of 1400 x 710 mm and can handle a maximum workpiece weight of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KUNZMANN BA1400 vertical machining centre we have for sale. Contact us for further details.

This 5-axis PROMAC ZEPHYR VT 2.5 XL was manufactured in 2015. It features an impressive X-axis travel of 2500 mm, Y-axis travel of 2200 mm, and Z-axis travel of 1100 mm. The machine is equipped with a HEIDENHAIN CNC control and has a maximum spindle speed of 20,000 rpm. If you are looking to get high-quality machining capabilities, consider the PROMAC ZEPHYR VT 2.5 XL vertical machining centre we have for sale. Contact us for further details.

Stainless steel tank, upright, cube Volume: 1 m³ Dimensions: 1.0 m wide × 1.2 m long × 1.60 m high

This 3-axis HAAS VF-4SS was manufactured in 2014. It features impressive travels of 1270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine is equipped with a powerful 30 hp spindle, capable of reaching speeds up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details.

This 4-axis Matec 30 HV CNC was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV CNC vertical machining centre we have for sale. Contact us for further details.

This 3-axis HEDELIUS C60 - 2000 vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the HEDELIUS C60 - 2000 machine we have for sale. Contact us for further details.

This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details.

Simultaneous 5-axis design - Control system SIEMENS 840 D SL - Working range X= 780, Y= 600, Z= 520 mm - C-axis 360° - B-axis -50°/+110° - Table clamping surface 720 x 540 mm - Spindle speed 20 - 15,000 1/min - Tool magazine 60 places - Tool holder HSK 63A - High-pressure system IKZ 40 bar - Probe 3D Weight 8,100 kg

This 3-axis Okuma MB66-VA was manufactured in 2010. It features a travel of 1500 mm on the X-axis, 660 mm on the Y-axis, and 660 mm on the Z-axis. The machine has a table size of 1530 x 660 mm and a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the Okuma MB66-VA vertical machining centre we have for sale. Contact us for further details.

This 3-axis Sure First QM-1836 was manufactured in 2011. It features a table dimension of 1800 x 1200 mm and impressive axes strokes of 1800 x 1300 x 600 mm. The machine has a maximum rotation speed of 15000 rpm and a forward speed of 20000 mm/min. If you are looking to get high-quality machining capabilities, consider the Sure First QM-1836 vertical machining centre we have for sale. Contact us for further details.

This 3-axis AXA VSC-1-M/C was manufactured in 1997. It features an X-axis travel of 2240 mm, Y-axis travel of 420 mm, and Z-axis travel of 480 mm. The machine is equipped with a Heidenhain CNC TNC 407 control system and has a tool changer capacity of 22 tools. If you are looking to get high-quality machining capabilities, consider the AXA VSC-1-M/C vertical machining centre we have for sale. Contact us for further details.

This 5-axis EMCO MAXXMILL 350 was manufactured in 2017. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine with 50 positions. If you are looking to get high-quality machining capabilities, consider the EMCO MAXXMILL 350 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VF-10/50HE vertical machining centre was manufactured in 2011. It features a generous X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 760 mm. The machine is equipped with a robust table size of 3000 x 800 mm and a maximum load capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50HE machine we have for sale. Contact us for further details.

This 3-axis TBI MVC 1890 was manufactured in 2013. It features a robust cast iron body, cross-slide table design, and slideway guides on all axes for enhanced rigidity and precision. Key specs include a Heidenhain CNC control, SK40 spindle taper, and a maximum spindle speed of 12000 rpm. It also boasts a 24-position automatic tool changer and integrated chip conveyor. Consider the opportunity to buy this TBI MVC 1890 vertical machining centre. Contact us for more information.

This 3-axis AXA VSC-2M was manufactured in 1991. It features a CNC control type and has an approximate total connected load of 20 kW. With around 13,063 operating hours, this machine represents an opportunity for high-quality machining capabilities. If you are looking to get high-quality machining capabilities, consider the AXA VSC-2M vertical machining centre we have for sale. Contact us for further details.