vertical boring mill used for sale

platform diameter: 1450 mm (HYDRAULIC - hydraulic spindle) maximum diameter of the piece: 1650 mm maximum height of the piece under the crossbar: 1200 mm - under tool holder: 1000 mm maximum workpiece weight: 11000 Kg mobile crossbar running on the plinth: 900 mm fast movement speed: 400 mm/min. slow displacement speed: 100 mm/min positioning accuracy on the base: +/- 0.1/100 mm main drive engine power: 60 KW platform advancement range: 2-280 rot/min number steps speed change box 3 work support stroke (X-axis): 1542 mm vertical stroke work support sled (Z-axis): 1200 mm sled section: 250x250 mm Milling shaft cone: ISO 50 milling engine power: 22 KW milling shaft speed range: 20-2000 rot/min X-Z axis work feed range: 1-4000 rot/min fast forward: 6000 rot/min C axis feed (slow-regimo milling rotation): 1-360 °/min X, Z, C: 45 N ...

Table diameter: 1,200 mm Maximum turnerable diameter: 1,350 mm Spindle power: 47.7 Kw Maximum turnable height: 950 mm Table capacity: 6 ton Table rotation speed: 2.22 ÷ 200 rpm Vertical RAM wagon stroke: 1,000 mm Vertical turret wagon stroke: 760 mm Tilt vertical wagons: 35 ° Total weight: 16 ton CNC FAGOR 8055 Year 1979 REVISED IN 2009

Table diameter 1450mm Maximum working diameter 1600mm Maximum height under the crossbar 1000mm Two balanced RAM Quota viewers Machine working in good condition Machine weight 18 ton This morando vertical lathe is in excellent condition and ready to be installed.

Spindle diameter 2,000 mm Turnerable diameter 2,000 mm MACHINE IN MECHANICAL/ELECTRIC RETROFIT PHASE

CN FAGOR 8055-T Machine equipped with quota viewers, turret 2nd pentagonal wagon Spindle diameter 2,000 mm Maximum turntable height 1,310 mm RAM stroke 1,000 mm Maximum diameter 2,200 mm Spindle Max Speed 150 rpm Nr. 3 wagons type 1 RAM 1 turret 1 side Main engine power 52 kW

Maximum turnerable diameter 1200 mm Maximum permissible diameter 1250 mm Spindle engine power (S1/S6) 55 / 66 Kw Spindle maximum laps 1200 rpm ASA 15" Spindle Attachment Fast speeds 12 m/min X-axis stroke 750 mm Z-axis stroke 750 mm Rated engine torque 20 (X)-20 (Z) Nm Peak engine torque 80(X)-80(Z) Nm Nominal thrust force 1200(X) -120 (Z) N Screw pitch 10 (X) -10 (Z) mm Tools 24 Crown HIRT tool attachment Maximum weight per cell 15 kg Tool change cycle time 10 seconds Maximum weight on tool change ~ 250 Average tool weight ~ 10 Maximum milling tool diameter 150 mm Maximum tool length 350 mm Siemens Sinumerik Control

Ø plateau: 1250 mm Top speed: 500 rpm - 2 ranges Ø false plateau: 1450 mm Maximum piece: 1550 mm Maximum height of the piece: 1200 mm RAM stroke: 800 mm Crossbar stroke: 850 mm Tool warehouse: 10 ATC CNC Siemens 810 D

Ø board: 1250 mm Maximum turnerable: 1500 mm Useful height: 1355 mm Vertical crossbar stroke: 800 mm Ram vertical stroke: 1000 mm Toolholder number: 15 Table pruned: 12000 kg CNC Tesla NS 642 C Fast: 8 m/min Power: 40 kW Weight: 27.2 ton

Ø board: 1,800 mm Maximum working ø: 2,000 mm Max. Turning height: 1,250 mm Max. weight on the table: 15 tons X-axis: 2700 mm Z-axis: 1200 mm Axis C 360 ° Table speed: 3 - 300 rpm Board engine: 60 kw RAM: 250 x 300 mm Work progress: 0 - 2000 mm/min. Nc: FANUC 15 T SERIES ATC: 50 ISO 50 tools Total weight: 58 ton

Year of construction 2003 Control Heidenhain iTNC 530 Table size 280mm Table load 200kg A-axis +/- 110 degrees B-axis 360 degrees X-axis displacement 700mm Y-axis displacement 590mm Z-axis displacement 480mm Spindle 15000 rpm Rapid passage 32m / min Automatic tool changer Yes, Big Plus spindle system Number of tools32 Tool length 280 mm Tool diameter 88 mm or 125 mm with adjacent pocket area Tool weight 7 kg Input400 / 3 / 50hz 33kW Equipment gap conveyors, coolant, handwheel, oil cooler Features Fully enclosed guarding Length 4000 mm Width 3000mm Height 3000 mm Net weight actually 9,490 kg. / 9.4 tons.

HURCO VM10 Vertical Machining Centre. Hurco WINMax Control Year of construction: 2010 Manufacturer: Hurco Model: VM10 Control: Hurco WINMAX Spindle Speed: 10000rpm Table size: 762 x 356 mm Tool change capacity: 20 Tool size: DIN40 Traverses XYZ: 560 x 356 x 457mm

honing diameter: 5-10 mm stroke: 40 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 station rotary table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 125 mm stroke: 350 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two step expansion for pre and finish honing Air gauge measuring Fixture for honing a 4 cylinder block Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Verticale drilling unit, 3 spindles suitable for IMA - incompatible with a Weeke plug

x-travel: 1000 mm y-travel: 508 mm z-travel: 460 mm size of pallet: 1240 x 550 mm numbers of pallets: 2 workpiece weight: 800 kg spindle taper ISO: 40 spindle motor: 5,5 kW turning speed range: 28 - 4000 U/min no. of tools in magazin: 30 control: MAZATROL M 1 total power requirement: kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 4,50 x 3,00 x 2,65 m acc.: chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

brand: CKD BLANSKO Model: SKHK 50 plateau diameter: 4770 mm maximum diameter: 5200 mm ram stroke: 2000 mm maximum height: 3000 mm capacity: 50 ton. Plateau revolutions: 1 range: 0.4-12/ 2 range: 1.6-50

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. General characteristics: Material Stainless steel Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 700X860 mm Outer diameter body 805 mm Body height 1040 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 400 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (400 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 880 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with wheels and rails for mobility by bull or pallet truck. Specifications: Volume 550 liters total (500 useful) Background type Sup. klopper - Conical Inf. Envelope Structure 850x890 mm Outer diameter body 800 mm Body height 900 mm

Vertical tank manufactured by aguilar and rooms in stainless steel 316L with a total capacity of 610 liters (500 useful liters). Flat top bottom with folding lid with handle and stirring support (triple-blade propeller type) Conical bottom with discharge through the bottom (DN50 PN10). About 3 posters. General characteristics: Maker AGUILAR AND ROOMS Guy Vertical mixer tank Material Stainless steel 316L Year of manufacture 1995 Weight 150 kg Body Atm design pressure Ambient design temperature Specifications: Volume 500 L (TOTAL: 610 L) Background type Sup. flat - conical inf. Type of agitation Triple-belic propeller Envelope 3 posters Upper bottom tubulatures x1 Lower bottom tubulatures x1 Outer diameter body 850 mm Body thickness 3 mm Body height 1000 mm Body height + backgrounds 1255 mm (TOTAL WITH AGITATION: 1995 mm) Top bottom thickness  ...

Vertical tank made of stainless steel with a capacity of 650 liters. Top klopper bottom with feed flange Body with 3 flanges Bottom klopper with discharge flange Mounted on 3 legs General characteristics: Guy Vertical tank Material Stainless steel Year of manufacture 2003 Weight 160 kg Technical features: Design pressure: 7 bar Test pressure: 10 bar Design temperature: ambient Characteristics of the flanges: Top bottom: Power supply: DIN2576 PN10 DN15 AISI316L Body For visual level: x2 DN25 PN10/40 AISI316L DIN2576 PN10 DN15/21.3 AISI316L Bottom bottom Download: DIN2576 DN15 PN10 AISI316L Specifications: Volume 650 l Background type Klopper Envelope 3 legs Upper bottom tubulatures x1 Lateral tubulatures x3 Lower bottom tubulatures x1 Outer diameter body 600 mm Body height 2000 mm (TOTAL: 2700 mm) Lower exit height 190 mm

Vertical tank made of inozidable steel with an approximate capacity of 220 liters. Flat top bottom with removable lid and manual closures. On the lid there is a man's mouth with manually folding lid, tubulaadura with NW type thread and tubuladura with inner thread. Inclined flat bottom with flange for discharge. Mounted on 3 legs. General characteristics: Maker SCHRADER Material Stainless steel Upper bottom tubulatures: Thread NW outer diam 65 mm - inner diam 38 mm Inner thread junction 30 mm Lower bottom tubulatures: Discharge flange: 97 mm outer diam - 38 mm inner diam Specifications: Volume 220 l approx. Background type Slope Envelope 3 legs Upper bottom tubulatures x2 Lower bottom tubulatures x1 Man's mouth 300 mm Outer diameter body 600 mm Body height 850 mm

Vertical tank manufactured by GIUSTI in stainless steel with a total capacity of 198 liters and a useful volume of 160 liters. Domed upper bottom bolted to the body with 4 clamp connections and 2 handles. Lower bottom bulged with discharge from the bottom by valve. Clamp output connection. On structure with wheels. General characteristics: Maker GIUSTI Guy Vertical tank Material Stainless steel Year of manufacture 2007 Design pressure: -1/+1 bar Design temperature: 150 ºC Working conditions: 0.5 bar at 30 ºC Test pressure: 1.7 bar at 10+-5 ºC Specifications: Volume 160 L (TOTAL: 198 L) Background type Convex Envelope Wheels Outer diameter body 600 mm Body height 550 mm

Vertical tank manufactured by SKERMAN in stainless steel with a capacity of 100 liters. Domed top bottom with 1 peephole and 4 clamp connections Bottom bulged with discharge from the bottom and propeller-type agitation of 4 blades. On 4 wheels. General characteristics: Maker SKERMAN Guy Vertical tank with agitation Material Stainless steel Year of manufacture 2009 Design pressures (min/max); empty / 1.1 bar Design temperature: (min/max): +5/+25 ºC Test pressure: 1.6 bar Specifications: Volume 100 L Background type Convex Type of agitation Propeller Agitation motor 0.5 hp - 0.37 kW Envelope 4 wheels Upper bottom tubulatures x4 clamp Lower bottom tubulatures x1 Outer diameter body 700 mm Body height 250 mm

Vertical tank made of stainless steel with a capacity of 100 liters. Domed upper bottom screwed to the body with 2 peepholes, 3 clamp connections and motor for agitation. Conical bottom with discharge from the bottom. It has a pump located under the lower bottom for the recirculation of the fluid. On 4 wheels. General characteristics: Guy Vertical tank Material Stainless steel Specifications: Volume 100 L Background type Bulging sup. - conical inf. Agitation motor 0.5 hp - 0.37 kW Envelope 4 wheels Upper bottom tubulatures x3 Lower bottom tubulatures x1 Peepholes x2 Outer diameter body 750 mm Body height 250 mm

Vertical tank made of stainless steel with a capacity of 150 liters. Domed upper bottom with 6 clamp connections and 2 ears for elevation. With a side entrance. Lower bottom bulged with discharge from the bottom by valve and propeller-type agitation without motor. On 4 wheels. General characteristics: Guy Vertical tank with agitation Material Stainless steel Specifications: Volume 150 L Background type Convex Type of agitation Propeller Envelope 4 wheels Ears x2 Upper bottom tubulatures x6 clamp Lower bottom tubulatures x1 Outer diameter body 550 mm Body height 600 mm

Vertical tank made of inoxidbale steel with a capacity of 500 liters. With half a cane, calorifugated, on 3 legs and with a manually folding lid. Sloping bottom. General characteristics: Material Stainless steel Specifications: Volume 500 L Background type Inclined bottom Half a cane + Lagging + Envelope 3 legs Outer diameter body 900 mm (TOTAL: 1,300 mm) Body height 800 mm (TOTAL: 2,000 mm)

PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

From the roll to the bag! Manufacture bags according to desired format and fill and seal with the product. Description - Optimal price-performance ratio - Easy operation and cleaning - Low maintenance - Stainless steel version (1.4301) with safety Plexiglas - Control is carried out by a PLC, color touch display with intuitive operating software - Fast, tool-free bag format change - One format included Specifications - Intermittent heat sealing for hot sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 180-520mm - Bag dimensions (LxW): 60-350mm x 70-250mm - Cycle rate: 15-50 bags /min. (depending on VE) - Electrical power: 3.5 KW / 220V / 50(60) Hz - Compressed air consumption: 700 l/min at 6 bar - Dimensions (LxWxH): 1540mm x 1160mm x 1600mm - Weight: 450kg

-Intermittent flow wrapping machine in stainless steel design. -Servo drive in the cross-sealing station for ideal and reproducible bag qualities. -Separately controlled drives for high flexibility with different packaging formats. -Year of construction: 2016 -Refurbished in 2022 -Condition: as good as new Specifications: -Package length: 80-550 mm (1000 mm with double extractor) -Package width: 80-350 mm -Film roll width: 730 mm maximum -Film roll diameter: 350 mm / 40 kg maximum -Roller core diameter: 60-80 mm -Film material: all common hot or cold sealable films and composite films -Production capacity cycles/min: 60 purely mechanical

Catalog No. : 5889 Type: VU 2313 Producer: TRIMILL Made in: 2010 Characteristic: Control system: HEIDENHAIN iTNC 530 Table dimensions: 1800x1800 mm Maximum table load: 18000 kg Number of axes: 5 pcs Total hours: 68.648 h Hours on: 41.293 h Travel length X-axis: 2300 mm Travel length Y-axis: 1300 mm Travel length Z-axis: 1000 mm Number of tools in the magazine: 10 pcs Max. pindle speed: 10000 1/min Max. Tool diameter: 110 mm Max. tool lenght: 450 mm Max. tool weight: 12 kg Power of the spindle: 25 kW Tool clamping: HSK-A 100 Weight: 38000 kg Equipment: Turntable Milling head Chip convoyer 2x Probe HEIDENHAIN and BLUM

FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...

Control: Siemens 840D Shopmill Country of origin: Germany Spindle speed n-1: 12,000 Spindle motor kW: 14 Z - Travel mm: 510 Y - Travel mm: 510 X - Travel mm: 835 Rapid traverse m/min: 30 Tool holder: SK 40 Table load: 800 kg Clamping surface mm: 1,000 x 560 Base area of the machine mm: 2,100 x 2,700 Machine weight approx. kg: 4,200 Linear scales Axis A Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy SPINDLE BEARINGS NEW!

Control Heidenhain ... TNC 640 Clamping table surface ... 1200 x 500mm Axis X ... 1040mm Axis Y ... 540mm Axis Z ... 600mm Spindle speed ... 12000-_/min. controlled axes ... 3 cooling... 25bar SK 40 workpiece weight... 800kg Magazine slots ... 24 L x W x W ... 2900 x 2420 x 2840mm Machine weight... 6400kg The machine is in good condition, possible to test under power.

Control OKUMA ... OSP P300M Clamping table surface ... 400mm Axis X ... 762 mm Axis Y ... 460mm Axis Z ... 460mm Spindle speed... 1000-15000 rpm. controlled axes ... 5 cooling... 20bar SK40 Main engine power ... 22/18.5kW Magazine slots ... 48 The machine is in good condition, possible to test under power.

Takang TKV-860-HT CNC Twin Spindle Vertical Turning Center Year 2015 . GENERAL SPECIFICATIONS Max. Cutting Diameter: 800 to 1000mm Max. Swing Diameter: 1000mm Max. Cutting Length: 860mm Spindle Motor (FANUC aP40): (2) 50 HP Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10-1500 RPM Spindle Nose: A2-11 Spindle: Spindle Motor (FANUC aP40): (2) 50hp Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10 - 1,500rpm Max Chuck Diameter: Installed 31.5" 3- Jaw Hydraulic Chucks Spindle Nose: A2-11 Front Bearing Diameter: 7.87" Spindle Bearings: Double Row Cylindrical and Angular Contact Spindle Speed Selection: Direct RPM Programming Spindle Speed Override: 50% ~ 200% Speed Range Shift: 2- Speed Gearbox Programmable High-Low Range Axis Drives: X Axis Travel (FANUC a22/3000i AC 4.0 HP): 18.31" Z Axis Travel (FANUC a22/3000iB AC 5.0 HP): 33.07" X Axis Thrust Force: ...

O-M LTD. CNC Vertical Boring Mill FANUC 16T-A CNC CONTROLS, RETROFIT 1994 CAPACITY: TABLE DIAMETER 4000mm MAXIMUM TURNING DIAMETER 7000mm MAXIMUM TURNING HEIGHT 2900mm MAXIMUN HEIGHT UNDER RAIL 3000mm TABLE WEIGHT CAPACITY 45400kg VERTICAL RAM TRAVEL, Z-AXIS 1500mm HORIZONTAL TRAVEL OF RAM, X-AXIS 2550mm TABLE SPEEDS RANGE .55-40 RPM TABLE SPEEDS 16 STEPS FEED RANGE VERTICAL RAM HEAD 0.003-.6 IPR RAPID TRAVERSE, HORIZONTAL HEAD 49 IPM RAPID TRAVERSE, CROSS RAIL 12 IPM RAPID TRAVERSE, COLUMN 21 IPM MAXIMUM TORQUE 58,000 LB/FT EQUIPPED WITH: FANUC 16T-A CNC CONTROLS (RETROFIT 1994) 4000mm T-SLOTTED TABLE WITH 4-TOP JAWS OPENSIDE ADJUSTABLE COLUMN VERTICAL OCTAGONAL RAM ON CROSS RAIL COOLANT CHIP GUARDS MAYFRAN CHIP CONVEYOR 50 HP MAIN MOTOR NOTE: MACHINE IS UNDER POWER FOR INSPECTION. WELL MAINTAINED MACHINE IN EXCELLENT CONDITION! RETROFIT WITH FANUC 16T-A CNC ...

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE

Machine weight: 20,000 kg Faceplate diameter 1250 mm Number of supports: 1 pcs Dimensions: height 4250 mm width 5630 mm depth of 3550 mm Extras: copying apparatus, turret head on the vertical support Technical condition at the time of sale: Replacement rotary amplifier on thyristor converter. Not operated since 1994 p. Small repair and adjustment of electrical and mechanical parts. The maximum dimensions of a workpiece Height 1150 mm The diameter of 1400 mm Weight 8000 kg

Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Table size: 500 x 400 mm Stepless cutting speed: 20 - 90 m/min Band saw blade length: 2840 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 0.75 kW Weight, approx.: 250 kg Scope of delivery: - Band saw blade - Stepless cutting speed - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Parallel fence -CE

M. No.: 700571/99-280108 Working width max. (mm): 660

DIEDESHEIM vertical lathe Vertifront 120-12 CNC. Electrics and geometry overhauled in 2007 for approx. 290.000,00 €! Former machine of the company Hoesch Rothe Erde Lippstadt, permanently maintained and maintained. Equipped with two turret supports (5-fold), protective hoods against emulsion vapors, housing see pictures, CE compliant. Details: Type 120-12 CNC Machine number L738 Year of construction 1983 Refurbished 2007 Space requirement approx. 20 sqm Weight approx. 20 to Power consumption approx. 110 kW Headstock Main spindle bearingsØ axial 500 mm radial 240 mm Cross Slide Unit Vertical slide stroke 800 mm (Z-axis) Paddling slide stroke 1,000 mm (X-axis) Basic hydraulics complete, system RING 2x2 axis CNC path control SIEMENS Sinumerik 3 TT Optional accessory 6-fold face plate clamping ideal for thin-walled workpieces ...

Cutting width: 520 mm Cutting height: 310 mm Working height: 1000 mm Cutting speed level 1: 25 - 85 m/min Cutting speed level 2: 120 - 500 m/min Cord edge: 3880 mm Saw band width: 3 - 16 mm Table size: 600 x 500 mm Table swivel range (in 4 directions): 15° Motor power: 1.5 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H): 1300 x 760 x 2140 mm Weight approx.: 500 kg Equipment: - Band saw blade - Stepless cutting speed - Reduction gearbox - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Angle stop - Parallel fence

travel -x axis: 2x 750 mm travel -y axis: 500 mm travel -z axis: 600 mm control: Siemens 840 D turning speeds: 30 - 6.000 U/min tool taper: SK 40 numbers of positions in the tool changer: 22 surface area: 2x (1.000 x 500) mm Dimensions (L x W x H): 4.100 x 2.300 x 2.600 mm Double-place machining center (shuttle operation) | AXA - DBZ Additional equipment: The machine comes with a 4th axis on each side processing in tack setting. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.