vertical boring mill used for sale

Number of boring units // Diameter boring units (mm) 9x 3.0 5x 3.5 1x 4.0 3x 4.5 6x 5.0 9x 5.5 31x 6.0 2x 6.5 19x 7.0 18x 8.0 1x 8.5 9x 9.0 5x 10.0 9x 11.0 2x 13.0 3x 14.0 1x 15.0 1x 16.0 2x 18.0 1x 19.0

CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...

Number of vertical independent spindles: 9 Number of horizontal spindles on axis X : (2+2) Number of horizontal spindle on axis Y: (1+1) N° 1 saw blade unit: (ø 100 mm) Router head 3,6 Kw ISO 30 - 12000/24000 rpm Max. thickness of the panel: 50 mm Control: Full Parametric Max weight of the panel: Kg 25 Max panel size: X ,Y 1100, Z 50 mm Min panel size: X 270,Y 150 (70 op.), Z 12mm Number of controlled axes: 3 Panel feeding speed: 25m/min Spindles speed rotation: 3600 rpm Saw blade speed rotation: 7000 rpm Air pressure: 7 bar Diameter of the dust extraction: ø 140 mm Exhaust air consuntion: (2000 mc/ora) - (30 m/s) Max drilling depth in horiz. on X and Y axis: 30 mm Max drilling depth in vertical: 45 mm Max horizontal diameter of the tools: 12 mm Max vertical diameter of the tools: 35 mm Motor power: 1,5 kw Max air consumption: 60 Nlt./min. Total power : 6,4 Kw  ...

M. No.: PB 04 02.01/1070

3-spindle line boring machine

Sr. No.: 801831

Condition: Very good condition Available: Immediately

M. No.: 1767

Paper boring machine Dürselen Corta PB 04; Cleaned and tested; 4 drill heads (up to 6 stick.usable); Drill cooling and lubrication; Sliding table; Endless drilling tape; Inlay depth behind the holes 65mm; Max. Stack height 50mm; Sliding table size before the drills 300mm; Max. Drilling distance over sliding table 420mm. Paper drilling machine Dürselen Corta PB 04; The cleaned and checked; Four heads (up to 6 heads); Driller cooling and lubrication; Sliding table; endless drilling band; size behind drillers 65mm; Max.pile hight 50mm; Seft of table in front of the drillers 300mm; max.drilling distance over the table 420mm.

Wohlhaupter turning head in the suitcase Wohlhaupter UPA6/3944 in a wooden case with accessories SK50 Type UPA6

Dowel drilling and drive-in machine Biesse type F/S Technical data: • Drill head: 21 spindles • Glue guns: 6

X axis travel 1000 mm Y axis travel 700 mm Spindle travel 300 mm Table dimension 1.100x842 mm Spindle speed 40-2000 rpm Max power input 10 kW Spindle motor 8 HP Total permissible load on worktable 1 ton Machine approximate weight 15 ton

In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

SN.: 16210512 Equipment / other information: Tool

Planausdrehkpof Wohlhaupter UPA 5 with accessories as shown. Cone ISO 50

bore diameter: 620 mm spindle diameter: 130 mm bore depth: 320 mm feed stepless: 0 - 12 mm/min turning speeds: 10 - 70 U/min voltage: 380 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,0 x 1,2 x 1,3 m transportable drilling out work, completely ready for connection gear of drill spindle runs over LENZE planetary drive advanced feed with LENZE direct current motor, output: 160 watt clockwise and counterclockwise with tool holder for Ø 420 x 620 mm, tool holder for tooling equipment fabri. LENZ LPAS 3, diverse turning steel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore diameter: 550 mm Spindle diameter: 100 mm bore depth: 320 mm turning speeds: 10 70 U/min feed stepless: 0 - 12 mm/min voltage: 380 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 1.35 t dimensions of the machine ca.: 1,0 x 2,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Henri Hauser M5 DR Coordinate Drill Spindle diameter 90 mm x-displacement 700 mm y-way 500 mm Drilling capacity in steel 40 mm Spindle holder MK 4 Drilling spindle stroke 170 mm Number of spindle rotations 2 infinitely variable 10-2000 rpm Boring diameter max. 230 mm Table dimensions - longitudinal 900 mm Table dimension - transverse 770 mm Vertical path of the cross beam 630 mm Drilling spindle 6 pieces from/to 0.02-0..20 rpm Passage between the stands 900 mm Passage between spindle and table 815 Spindle motor 4.0 hp Total power requirement 380 V Machine weight approx. 3.9 t Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg

Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel: Z 330 mm/Y 410 mm/X 630 mm -Quill stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation

I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same.

Multi-stand drill Prior sale reserved - errors possible Internal Reference Number: D-1143-1

I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.

X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -spindle tool -Recording: SK50 -suitable for tool changers -spindle dimension -Dimensions: 290/120/H320 mm -Weight: 12 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -spindle tool -Recording: SK50 -suitable for tool changers -spindle dimension -Dimensions: 240/120/H320 mm -Weight: 10 kg

1 set of boring bars for main bearing boring mill, carriage via cone, sleeve. Dimensions: DxL 20x940 mm 27x1100 mm 31.5x1400 mm 39.7x1700 mm Sale preferably as a set Price on request

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm

Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm Weight: 4,5 T

Sr. No.: 70218 Equipment / Additional information: Various tools

Longitudinal direction ''X''. 4500 mm Transverse direction ''Y''. 3000 mm Spindle stroke ''Z'' 500 mm Astand Spindle Table 160 – 660 mm Table load 2000 kg/m²

Condition: Very good condition

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, facing and boring head -Boring head: MK5 mount -Spindle size: Ø 120-140 mm -Dimensions: Ø 124 x 253 mm -Weight: 8.4 kg

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, facing and boring head -Boring head: MK4 mount -Spindle size: Ø -93 mm -Dimensions: 93/64/H200 mm -Weight: 2.2 kg

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, facing and boring head -Boring head: SK40 holder -Tool holder: 16 x 16 mm see photos -Dimensions total: Ø 63 x 250 mm -Weight: 2.8 kg

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, cutter, circle cutter -Manufacturer: Marchner, die cutter, boring head, circle cutter -Recording: MK3 -Diameter range: 33 - 85 mm -Transport dimensions: 340/165/H100 mm -Weight: 5.3 kg

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Recording: SK50 -Adjustment range: 20 mm -Tool shaft: Ø 30 mm -Weight: 10 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Quantity: 2x spindle tools -Recording: SK50 -Spindle dimensions: 145-230/225-310 mm Price: complete -Weight: 14 kg/piece

Saw-Drill Manufacturer: Pade Model: EV 25 Built in 1995 Sawing unit Drill gear with 5 spindles

Multi-spindle drilling machine from Bernhard Steinel - Machine Tool Factory Schwenningen/Neckar ran reliably until the end The machine is equipped with a foot pressure switch from Festo a drive motor from Bauknecht and a control box from Siemens Pneumatic lines should be checked/repaired before The machine can be viewed at any time. Transport via freight forwarder can be arranged at short notice -feel free to take a look at the other advertisements or visit us directly at Gerstenstraße 2, 17034 NB The price is net plus 19% VAT If you have any further questions, please call or write. Maschinenhandel Nord new & used machines for industry, trade and commerce

diameter:500 mm tool adaptor:50 Weight:12 kg face movement each head:82 mm feeds:0,06 mm/U

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm