vertical borer used for sale

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1270 mm main drive:80 kW faceplate speeds from - to:1 - 355 U/min max. workpiece weight:6.000 kg milling motor:37 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 (8 x 100 mm) mm ram head dimension:240 x 240 mm max. ram stroke:1250 mm weight of the machine ca.:50 to total power requirement:133 kVA dimensions of the machine ca.:11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories

The machine is in good technical condition; testing is possible by prior arrangement. + Accessories: Chip auger, programmable coolant nozzle, power failure detection module, remote jog handle with color LCD, rigid tapping, 15,000 rpm spindle (ISO 40 taper), 30 hp (22.4 kW) vector drive, inline direct drive, intuitive Renishaw wireless probe system, 2x machine vise, 30x tool holder.

Vertical sheet metal storage, drawer sorting storage for sheet metal, Hegla, 10 compartments for sheet metal 1.50m x 3m, – used - : Price from location: 4.500.-€ (net)! Manufacturer: Hegla Type: SCH-SL-3 Year of construction 03/2010 Maximum adjustment length 3,000 mm Maximum adjustment height 1,500 mm Number of compartments:10 compartments Load capacity 500kg per drawer (10 x 500kg) Max. loading height: 1,500mm Total dimensions LxWxH: 3,250mm x 1,590mm x 1,950 mm Condition: good Available: immediately Location: 87719 Mindelheim

The machine is in good technical condition and available for testing by prior arrangement. It features a FANUC i control system, cast-iron construction, linear guideways, X/Y/Z axis travels of 1270/670/625 mm, a 1300 x 670 mm table with T-slots, a table load capacity of 1000 kg, and a 30-position tool changer. Extensive accessories included: 4th axis (rotary table), hydraulic vise, RENISHAW tool and workpiece probes, oil skimmer, 3-color signal light, belt-type chip conveyor, Filtermist 6002 mist collector, tool holders, etc.

The machine is in good technical condition and can be tested by prior arrangement. It is fully functional. It is equipped with a new tool magazine but comes without a workpiece probe, clamping fixtures, or tools.

x-travel:2500 mm y-travel:1000 mm z-travel:750 mm table surface area:3220 x 1000 mm Workpiece weight approx.:3000 kg spindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/min feed speeds:1- 30000 mm/min rapid traverse:30 m/min total power requirement:40 kW dimensions of the machine ca.:6,9 x 4,1 x 3,7 m weight of the machine ca.:21 t with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders

turning diameter:300 mm swing diameter:350 mm turning height:275 mm x-axis:925 mm z-axis:250 mm clamping chuck diameter:200 mm Feed speed:30 m/min. total power requirement:45 kW weight of the machine ca.:7 t Machine was used just from time to time in the last years - very good condition! with CNC SIEMENS 840 D 12-station turret head with driven toolings workpiece in and out conveyor belt coolantattachment and chip conveyor diverse accessories

Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of Make: 2000 Condition: Use, Energized, Control on Windows 7 NEW x-travel 600 mm y-travel 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm Tool changing device 18-fold Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röder's Job Manager (for processing several workpieces one after the other) Probing programs for almost all common geometries Extor Extraction System for Dusty Machining Minimal lubrication Bedtrack blower Blum measuring laser (for tool measurement length + diameter + contour and fracture control) Tool cleaning (air) Cooling unit for spindle and control cabinets Documentation Without accessories such as tools or vises Auction-ID: A7-5 ...

Mori Seiki DuraVertikal 5080 3Axis Machining Center (11/2006) Manufacturer: Mori Seiki Type: auto_awesome Source language: English 587 Table length 1350 mm Table width 600 mm Number of T-profiles 6 T-profile width 18 mm Max. table load 1000 kg Longitudinal travel (x-axis) 1050 mm Transverse travel (y-axis) 530 mm Travel (z-axis) 510 mm Max. tool diameter 125 mm tool weight 8 kg Spindle nose bt 40 Distance spindle nose table 150 - 660 mm By 0 rpm Until 10,000 rpm Voltage 50 Hz 3x 400 volts Spindle performance 22 kW Total power requirement 58 kVA Machine weight approx. 8,030 kg Length 2,500 mm Width 2,350 mm Height 2,700 mm Give feedback Translation results available Year of manufacture: 11/2006 Condition: used, good, in production Incl. tools in the turret Auction-ID: A7-50270-26

Ebara EVM 18 12F5 & SAER CVM 131-B/11 multistage centrifugal pumps – 11 & 5.5 kW Specifications: Quantity: 2 vertical multistage centrifugal pumps Ebara EVM 18 12F5 Version: MONO/D/SE Flow rate: approx. 130–400 l/min / approx. 7.8–24 m³/h Head: approx. 188–83 m Maximum head: approx. 194 m Engine power: 11 kW / 15 hp Electric motor: AEG AM160MVA2 Supply voltage: 3-phase, 380–415 / 660–720 V, 50 Hz Speed: approx. 2925 rpm Protection class: IP55 P/N: 3180100012 Serial Number: BG3210620 CE marked SAER Elettropompe CVM 131-B/11 Type: Vertical Multistage Centrifugal Pump Flow rate: 10–22 m³/hr Head: 89–20 m Engine power: 5.5 kW / 7.5 hp Supply voltage: 400/690 V, 50 Hz Current: 11 / 6.4 A Speed: 2900 rpm Protection class: IP55 Weight according to type plate: 68 kg Serial Number: 1982125 CE marked Features: Electric motors Exis ...

Strautmann vertical hydraulic compactor press, model PP 1207, used to press and compact bottles and cans from the unpacking of products. The equipment was working when it was no longer used in 2019 due to a change in the type of plant entrances. It currently shows noticeable signs of deterioration due to the passage of time and inactivity, including rust in the carbon steel metal parts. The instrumentation is deteriorated and may require replacement. Pneumatic equipment needs a complete overhaul. The engine and hydraulic pump show signs of corrosion and the components under pressure should be replaced before the press can be put back into operation. The press is offered in its current condition, untested. Disassembly, disconnection, loading, removal, transport, repair and commissioning will be the responsibility of the buyer. It is recommended to carry out a pre-inspection before bidd ...

faceplate diameter:4000 mm swing diameter:4300 mm turning height:330 mm faceplate turning speed range:1 - 92 U/min workpiece weight:18 t feeds:1 - 4000 mm/min main drive motor:55 kW total power requirement:85 kVA weight of the machine ca.:64 t dimensions of the machine ca.:90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor

Technical data Manufacturer: Hurco Model: VMX24 Machine Type: Vertical CNC Machining Center Year of Make: 2001 Machine number: H20131 Control: Hurco Ultimax Operating hours: 42,221 h Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Hand control unit (jog handwheel) Emergency stop available Interfaces: Port 1 / Port 2 / Coax / 10BASE-T Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-50403-3000

faceplate diameter:4770 mm swing diameter:7000 mm turning height:1000 mm slide stroke:1000 mm workpiece weight max.:100000 kg faceplate turning speed range:2 - 20 U/min feed speeds:1 - 10000 mm/min rapid traverse:10 m/min ram head dimension:250 x 250 mm main drive:100 kW total power requirement:200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment

- Total installed power: 60 KW. - Production capacity: 555 untapped moulds / 485 mapped moulds. - Maximum cool-down time: 48 min. - Maximum sand consumption: 110 Tons/h. - Weight of the pieces: from 0.50 kg to 20 kg. - A cooling line consisting of a DISA SBC-2306 belt conveyor with an approximate length of 52000 mm is included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-2

faceplate diameter:1600 mm swing diameter:1800 mm turning height:1500 mm max. ram stroke:1200 mm faceplate turning speed range -stepless-:2,5 - 250 U/min workpiece weight max.:10.000 kg ram head dimension:240 x 240 mm feed range:1 - 3000 mm/min power capacity:45 kW weight of the machine ca.:20 t modernized and overhauled in 2010 with CNC SIEMENS 840 D 12 positions automatic toolchanger telescopic covers splash guarding chip conveyor coolant attachment diverse toolholders

Key data: 1000 mm, 800 mm, 500 mm

Technical Specifications • CNC Control Unit: DIALOG 112 • Axis Travels (X, Y, Z): • X-axis: 1000 mm • Y-axis: 800 mm • Z-axis: 500 mm • Work Table: • Table dimensions: 1250 x 800 mm • Maximum table load: 1200 kg • Spindle: • Tool taper: SK 40 / HSK-A63 (depending on configuration) • Maximum spindle speed: 15,000 rpm (up to 18,000 rpm for hi-dyn versions) • Spindle drive power: approx. 10 / 15 kW • Tool Changer (ATC): • Magazine capacity: 30 positions (some variations have 60) • Max. tool weight: 12 kg

Technical data Manufacturer: BT Model: OP 1000 HSE Serial Number: 313415AA/1008 Load capacity: 1000 kg Lifting height: up to 7800 mm Load center of gravity: 400 mm Battery voltage: 48 V Net weight without battery: 2869 kg Operating hours: 1169.1 h Configuration Vertical order picker with driver's platform Liftable working platform Integrated roller conveyor on load bearing Front work lights Rotating beacon FIAMM Traction Battery Instruction manual available Condition Used condition with usual traces of storage and use Functionality not tested Auction-ID: A1-50643-99

Key data: 500 mm, 420 mm, 380 mm

CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 500 Y 420 Z 380 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 32 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3 D Probe Coolant Setup 4 Height Adjustable Machine Shoes Operating Instructions

faceplate diameter:5000 mm swing diameter:6100 mm turning height:2400 mm ram stroke each side:1490 mm ram head dimension:340 x 340 mm max. workpiece weight:100.000 kg total power requirement:100 kW weight of the machine ca.:155 t faceplate turning speed range:0,4 - 50 U/min with 2 axes CNC SIEMENS 840 D

faceplate diameter:1400 mm swing diameter:1470 mm turning height:1325 mm ram stroke range:750 mm adjustment of cross-rail:850 mm max. workpiece weight:12000 kg faceplate turning speed range:4,5 - 224 U/min feed per revolution:0,06 - 8 mm rapid speed:1,8 m/min total power requirement:50 kW weight of the machine ca.:16 t Machine was modernized in 2008 with new electric 2-axes digital readout 5-station turret head autom. swivelling diverse toolholders

Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com