vertical borer used for sale

bore capacity in steel (diameter): 50 mm arm length: 2000 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,8x4,5x3,4 m Brand: Batliboi Type: BPR-50 Boiler radial drilling machine Capacity: 50 mm Throat depth: 2.000 mm Spindle taper: MK5 Stroke: 350 mm Drilling Spindle: 75 mm ø Head in degrees adjustable Speed min: 16 RPM Speed max: 800 RPM Clamping surface: 2.610 x 1.050 x 260 mm Machine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mm Machine weight: 6.570 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill bits for rock drills in different lengths

Code 220406 Description of fast radial MK-4 Brand DONAU Type DR – 32 Machine r. 686 – 3 Year of construction ± 19.. Capacity in steel 60 32 mm Capacity in GG 45 mm Tapping in steel 60 M 26 Thread cutting in GG M 36 Spindle holder 4 MK Projection 900 mm Table 1200 x 600 mm Vertical movement of the boom 400 mm Spindle stroke 190 mm Spindle table min. – max. 80 – 650 mm 18 spindle speeds 31 – 1370 rpm Spindle feeds 0.1 – 0.15 – 0.2 – 0.3 mm/rev Power 1.5 / 2.2 kW – 380 volts Accessories tapping device Dimensions Br. x D x H 1200 x 1600 x 1910 mm Weight 1700 kgs Condition machine is in normal condition

Code 230302 Description of fast radials Brand DONAU Type DR – 13 G Machine r. 321 – 2 Year of construction 1966 Capacity in steel 60 13 mm Capacity in GG 16 mm Thread cutting capacity in steel M8 – M 10 Thread cutting capacity in cast iron M 10 – M 12 Spindle holder 2 MK Projection 820 mm Table 1000 x 700 mm Vertical movement of the boom 400 mm Spindle stroke 100 mm Spindle table min. – max. 180 – 580 mm Spindle speeds infinitely variable in 2 steps 200 – 1100 / 600 – 3400 rpm Power 0,37 / 0,44 kW – 380 Volt Dimensions Br. x D x H 1000 x 1300 x 1800 mm Weight 590 kgs Condition machine is in normal condition

spindle diameter: 135 mm x-travel: 1000 mm y-travel: 795 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 mm, 1007 mm

Code 231027 Rewriting Controlled Fast Radials Make DONAU Type DR 40 Machine No. 1137 – 3 Built in 1988 Drilling into full stem 60 40 mm Drilling into full GG 22 50 mm Tapping capacity into the St. 60 M 33 Tapping capacity into the GG 22 M 45 Steep taper of the drilling spindle SK 40 Feed normal ( 5x ) 0.075 – 0.6 mm/rev Drilling spindle speeds 18 pcs. 35 – 1800 rpm Drilling spindle stroke 200 mm Drilling radius min/max 350 / 1300 mm Projection min/max 120 / 1007 mm Height adjustment of the drilling spindle head 450 mm Distance drilling spindle/table min/max 350 / 800 mm Table top 1225 x 750 mm Power 2 / 3 kW 380 Volt Weight 2000 kgs Dimensions LxWxH 2300 x 1225 x 2400 mm Accessories for tapping device Coolant system Condition machine is in good condition

Offer 24130 Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the rear side of the machine

Specifications: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 30 - Threading GG 25 M 40 - Drilling spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drill feeds 0.1 - 0.45 mm - min./ max. distance spindle – table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg -with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the left side of the machine

Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm 0P2Fdo3 - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the rear side of the machine

Drilling capacity 45mm Table size : 1200 x 560 mm Drilling capacity 45mm Spindle Holder MK 4 Quill stroke 170mm Speed / Steps 70-2000 rpm Feed / Steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

spindle turning speed - stepless: 26 - 1650 U/min voltage: 380 V 0: 50 Hz rated current: 15 A connected load: 6,5 kW tool taper: MK 4 weight of the machine ca.: 2,3 t dimensions of the machine ca.: 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 135 mm x-travel: 1000 mm y-travel: 700 mm z-travel: 300 mm cross rail adjustment - vertical: 780 mm distance between table/spindle: 1000 mm table surface area: 1100 x 842 mm distance between columns: 1100 mm table load: 1500 kg tool taper: SK 45 spindle turning speed range: 2400 U/min spindle drive: 5,9 kW feed range: 1 - 6000 mm/min weight of the machine ca.: 10,6 t dimensions of the machine ca.: m Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs € 118,436.00) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm Th ...

bore capacity in steel (diameter): 23 mm spindle taper: MK 2 spindle stroke: 130 mm arm length: ca. 860 mm table-size: 1280 x 500 mm surface area: ca. 1250 x 480 mm turning speed range: 115 - 2400 U/min workpiece height max.: ca. 535 mm boring chuck: Schnellspannfutter 1-13 weight of the machine ca.: 690 kg total power requirement: 1 kW range L-W-H: ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: 950 mm turning speed range: 102 - 2000 U/min turning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mm feed range: 0,075 x 0,3 mm/min table surface area: 1200 x 510 mm total power requirement: 2 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,8 x 1,2 x 2,25 m Compact style with hydraulic fast-clamping, motorised height adjustment, feeder device and thread-cutting device. Integrated coolant container in machine frame. Main switch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: 950 mm turning speed range: 51 - 1000 U/min turning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mm feed range: 0,075 x 0,3 mm/min table surface area: 1200 x 510 mm total power requirement: 2 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,8 x 1,2 x 2,25 m High-speed radial end mill with - Thread cutting attachment - Vertical table 750 x 620 mm - Horizontal table 1200 x 510 mm - Emergency stop device - Documentation Machine-No. 445 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 1 mm x-travel: 1 mm y-travel: 1 mm total power requirement: 1 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: 3 feed:: 4 Stufen : 2580 x-travel: 2500 mm throat: 1000 mm : 1000/2800 mm weight: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Danube DR 40 Z High Radial Drilling Machine The Donau DR 40 Z is a powerful, conventional high-speed radial drilling machine for trade and industry. It is characterized by its high flexibility and the swivel and extendable boom, which allows workpieces to be machined quickly and precisely. Technical data Drilling capacity: Up to 40 mm in steel and 50 mm in cast iron. Threading: Maximum M 33 in steel and M 45 in cast iron. Tool holder: MK 4 (Morse code 4). Spindle stroke: 200 mm. Projection: Variable from 320 mm to 1140 mm. Workpiece height: Maximum approx. 700 mm. Table size: 1200 x 750 mm. Speed range: 45 to 2240 rpm Feed rate: 0.075 to 0.6 m/min. Drive power: approx. 6 kW. Weight: Approx. 1.8 to 2.0 tons "Everything from a single source: We will be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de More items - new an ...

Danube DR 32 High Speed Radial Drilling Machine High-precision and robust high-speed radial drilling machine, which is appreciated for its reliability in mechanical engineering and industrial production. Thanks to its swivelling boom, it allows the drill head to be positioned quickly and flexibly above the workpiece. Technical data Drilling capacity: Maximum 32 mm in steel. Tool holder: MK 4 (Morse taper). Speed range: Approx. 41 to 1,800 rpm Quill stroke: 190 mm to 200 mm. Projection: Flexibly adjustable from approx. 240 mm to 850 mm Table size: 1,200 x 600 mm Typical functions Tapping device: Integrated automatic for cutting threads (e.g. up to M26 in steel). Feeds: Automatic quill feed in several stages Coolant device: Integrated pump and coolant trough directly on the work table. "Everything from a single source: We will be happy to offer you suitable bank f ...

bore capacity in steel (diameter): 32 mm arm length: 1230 mm table surface area: 1200 x 500 mm bore stroke: 180 mm feed - independent: 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds: 60 - 1800 U/min taper MK: 4 total power requirement: 2,7 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Table clamping surface: 600 x 1800 mm Height adjustment of the boom: 450 mm small/large drilling radius: 305/1305 mm Spindle holder: SK 40 Quill stroke: 200 mm Spindle speeds infinitely variable: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency-controlled: 5.5 kW electr. Connection: 400 V, 14 kVA Weight: 3400 kg Space requirement: 3800 x 2000 x 2500 mm

bore capacity in steel (diameter): 32 mm arm length: 1230 mm table surface area: 1200 x 500 mm bore stroke: 180 mm feed - independent: 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds: 45 - 1370 U/min taper MK: 4 total power requirement: 2,7 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26252 Technical data: - Drilling capacity into solid steel ST 60 22 mm - Drilling capacity GG 25 32 mm - Threading ST 60 M 20 - Threading GG 25 M 24 - Drilling spindle holder MK 4 - Quill stroke 140 mm - 18 drilling spindle speeds 60 - 3050 rpm - Drill feeds infinitely variable 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max 420 / 1320 mm - Swivel angle 320 ° - Table size 1200 x 600 mm - Table height 905 mm - mot. Height adjustment / stroke of the drilling column 430 mm - hydr. Columns + Boom Clamp - T – Vertical grooves on the left side of the machine - Coolant device - Drive 400 V / 1.1 / 1.6 kW - Space requirement approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight approx. 1800 kg

Donau Flex 135 Schnellradialbohrmaschine Hersteller: Donau Typ: Flex 135 Schnellradialbohrmaschine Zustand: gebraucht, sehr gut bis neuwertig Baujahr 2020 Stufenlose Drehzahleinstellung Stufenloser Pinolenvorschub Gewindeschneideinrichtung Abmessungen und Verfahrwege Werkzeugaufnahme MK 4 Säulendurchmesser mm 170 Tischabmessung mm 1200 x 600 Anzahl der T-Nuten 4 Abstand der T-Nuten mm 125 Pinolenhub mm 165 Säulenhub mm 450 Bohrleistung ins Volle St 60 mm 35 GG 22 mm 42 Gewindeschneiden St 60 M 30 GG 22 M 36 AC-Motor, frequenzgesteuert kW 4,0 bei 100 % ED. Drehzahlbereich: min -1 20 ? 3200 Vorschub stufenlos mm/U. 0,02 ? 0,7 Maschinenleuchte Spindelschutz

Type: MS90 Tegenargument inbegrepen Universele freeskop inbegrepen Diverse uitbreidingsonderdelen inbegrepen Spindle Dia: 90 mm Spindle bore: Mk5 - 1000 rpm Table dimensions : 1200 x 1000 mm Max travel spindle: 800 mm Max rotationangle table: 360° Power on spindle: 15 HP Length : 5200 mm Depth : 2650 mm Height: 2900 mm Weight: 10 ton

Manufacturer: VEB Mikromat Model: BKoE OP 630x1000 Condition: Used Stock number: 9337 Worktop length: 1000 mm Worktop width: 630 mm X-axis moves: 710 mm Y-axis moving: 400 mm Z-axis moves: 315 mm W-axis moves: 590 mm Machine weight: 5000 kg Description Equipments: DRO

bore capacity in steel (diameter): 40 mm arm length: 1050 mm workpiece height max.: - mm turning speeds: 15 - 2800 U/min feed range: 0,075 - 0,45 mm/min dimensions: 2450 x 1300 x 2300 mm Weight: 1500 kg Control: Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T- ...

Functions: Automatic storage and retrieval of stored goods, High space savings – up to 85% less floor space compared to conventional racks, Ergonomic working, as the goods are provided at working height, High picking accuracy and quick access to stock items Load capacity: Maximum. 2x 33500 Kg, Shelf load: up to 495 Kg test at measurement 1. The permissible resistance is less than 0.20 Ω. The measured values are 0.01 Ω and 0.03 Ω respectively and thus well below the limit value. Measured values: L1–PE: 0.59 Ω / 399 A, L2–PE: 0.51 Ω / 461 A, L3–PE: 0.54 Ω / 436 A, Required minimum short-circuit current: 375 A, maximum . Impedance: 0.61333 Ω; Result: All three measurements are within the permissible limits and are met / in order test points at measurement 3. The prescribed minimum value is 1 MΩ. The following were measured: lift motor M1: > 500 MΩ, extractor motor M2: > 500 ...

Vertical band saw HESKA type ESA 4Fabr. No. 681174 year of construction approx. 1985Roller diameter 420 mmThroat depth 400 mmTable size 500 x 500 mmCutting height 285 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed Gear stage (1) 15-140 m/min. Saw blade speed gear stage (2) 150-1400 m/min. Motor power 1.5 kWNet connection 380 volts, 50 Hz - stepless saw blade speed via PIV gearbox with handwheel adjustment and 2 gear steps - saw table swivel in 2 axes -

Vertical band saw MÖSSNER REKORD type SM 420Masch. No. 17010 Year of construction 1968Roller diameter 420 mmRadius in width 415 mmRadius in height 265 mmTable size 605 x 600 mmBelt speed 18 - 562 m/min. 8 stepsSaw blade length min/max. 3150 / 3260 mmDrive power 1.1 / 1.7 kWNet connection 380 V 50 Hz- Saw blade speed over 4 gear stages and 2 motor speeds- Saw blade butt welder IDEAL BS 0-16 with scissors and grindstone- swivelling work table in 2

Vertical band saw JAESPA type MSU 4Fabr. No. 724749 year of construction approx. 1980Roller diameter 420 mmProjection 400 mmTable size 610 x 610 mmCutting height 260 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed 10-1500 m/min. infinitely variableMains connection 400 volts, 50 Hz- infinitely variable saw blade speed via 2 gear stages and infinitely variable via belt drive- Saw table swivel- Saw blade butt welding machine IDEAL BS0-16- Saw blade shear- Sharpening stone for grinding the weld seamSpace requirement L x W

Thimonier THB9200 Vertical Form Fill & Seal Filling Machine (2021) 50-500ml berlingot (pillow-style triangular pouch) Liquids & viscous products (including corrosive detergents) Auction-ID: A1-48805-2

Thimonier THB9200 Vertical Form Fill & Seal Filling Machine (2021) 50-500ml berlingot (pillow-style triangular pouch) Liquids & viscous products (including corrosive detergents) Auction-ID: A1-48805-1

General Description Universal vertical tool milling machine manufactured by the Kirov Machine Tool Plant, Odessa (USSR) . Designed for precision milling, drilling, slotting and general toolroom machining. The machine is equipped with a geared vertical spindle, T-slot work table and heavy-duty machine vise. Technical Details Manufacturer: Kirov Machine Tool Plant, Odessa (USSR) Machine type: Universal vertical tool milling machine Year: Not confirmed Spindle speeds: 145 / 290 / 580 / 725 / 1,450 / 2,900 rpm Vertical spindle head T-slot machine table Heavy-duty machine vise included Longitudinal power feed Separate electrical cabinet Machine work light Condition Fair to good used condition. The machine appears mechanically complete with spindle gearbox, T-slot table, heavy-duty vise and electrical cabinet installed. Cosmetic paint wear, industrial staining and light surf ...

Pressing force: approx. 8 tons Connection value: 230 V 1.5 kW Filling shaft: 630x460x750 mm Bale size: 630x460x700 mm Bale weight: approx. 30 - 80 kg Machine size 830x970x1870 mm WxDxH Machine weight: 360 kg Warranty: 12 months Condition: technically and optically revised Completely overhauled with new paint!

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500

Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Table clamping surface: 2 x 350 x 300 mm traverse path x/y/z: 700/300/250 mm spindle retainer: BT 30 ISA kl. / gr. Table/spindle distance: 450 mm spindle speeds: 6-6000 rpm number of tool stations: 10 pieces feeds: 5-10000 mm / min rapid traverse: x & y/z 25/20 m / min spindle drive: 3,1/4,1 kW Electr. Supply: 400 V kW weight: 2600 kg

Campagnolo Packaging Systems Vertical form and seal machine Model: C25 Serial:A02-02

Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm

I am offering them a complete vertical packaging plant. Multihead weigher by Ishida Vertical flow of Hassia Redatron and Bosch Bosch cartoning machine If you are interested, please contact me.

Vertical pallet transport

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

Grenzebach HGB new device, 1a State ca 300 BH Uea dimensions: 590h x 170 x 190 d cm Weight ca. 1.8 t 78 cm with toothed belt conveyor Rail length 500 cm from the ground 26 cm