vertical borer used for sale

This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details.

Filling opening size: 120x60cm; bale size: 120x114x80; Max press pressure 50 tons; bale weight 450kg; 400v Auction-ID: A1-47362-10

This 3-axis HAAS VF5-HE vertical machining centre was manufactured in 2005. It features a spacious table size of 1372 x 610 mm and a maximum table load of 1800 kg. The machine offers impressive X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF5-HE machine we have for sale. Contact us for further details.

Suitable for water or milk (not refrigerated, but CIP cleanable) Capacity approximately 22000 liters Dimensions approximately 5 meters high 2.50 wide Auction-ID: A1-47392-353

This 3-axis HAAS VM-6 was manufactured in 2018. It features an impressive X-axis travel of 1,626 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details.

x-travel:800 mm y-travel:410 mm z-travel:510 mm control:Fanuc 10 MA rapid travel x/y/z:20/20/15 mm/min table surface area:1100 x 450 mm tool taper:BT 40 tool magazin::30 BT 40 max. tool length:250 mm max. tool weight:8 kg power requirement:7,5/5,5 kW turning speed range:6000 1/min weight of the machine ca.:6,3 t Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup"

This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details.

x-travel:1100 mm y-travel:600 mm z-travel:510 mm control:Heidenhain iTNC 530 table-size:1050 x 600 mm table load:500 kg spindle taper:SK 40 turning speeds:10000 1/min power capacity at 100 % load:9 kW rapid travel x/y/z:24 m/min feed:24 m/min Tool changer:40 SK 40 dimensions of the machine ca.:4,3 x 2,6 x 2,25 m weight of the machine ca.:8,8 t POS mill 1100 vertical machining center in very good condition from 2009 Options: - parts measuring M&H receiver without probe - external hand wheel Heidenhain HR 410 - Air supply through spindle - air gun - paperfilter system with coolant through spindle 40 bar -

This 3-axis HAAS VF-9/40HE vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 2,134 mm, Y-axis travel of 1,016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 2,134 × 914 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-9/40HE machine we have for sale. Contact us for further details.

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

This 3-axis Hyundai Wia F500 was manufactured in 2012. It features a table size of 1,000 × 450 mm and a maximum table load of 600 kg. The spindle speed can reach up to 10,000 rpm, with a continuous power output of 15 kW. If you are looking to get high-quality machining capabilities, consider the Hyundai Wia F500 vertical machining centre we have for sale. Contact us for further details.

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine.

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

This 4-axis Bridgeport VMC 1000/30 was manufactured in 2003. It features an X-axis travel of 1000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a 30-tool magazine and a BT40 spindle holder, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details.

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

This 3-axis Cincinnati MAG CFV1300i was manufactured in 2010. It features an impressive X-axis travel of 1300 mm, Y-axis travel of 540 mm, and Z-axis travel of 720 mm. The machine includes a maximum table load of 1000 kg and a maximum spindle speed of 9000 rpm. If you are looking to get high-quality machining capabilities, consider the Cincinnati MAG CFV1300i vertical machining centre we have for sale. Contact us for further details.

x-travel:800 mm y-travel:400 mm z-travel:350 mm total power requirement:44 kW weight of the machine ca.:8,8 t dimensions of the machine ca.:6,1 x 4,1 x 3,3 m tool taper:HSK63 number of spindle speeds:36-12.000 Number of tools:2 x 21 St. rotary table diameter:1340 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

This 3-axis HERMLE UWF 1002 H was manufactured in 1995. It features an X-axis travel of 700 mm, Y-axis travel of 630 mm, and Z-axis travel of 500 mm. The machine has a table load capacity of 700 kg and a table surface area of 1000 x 490 mm. If you are looking to get high-quality machining capabilities, consider the HERMLE UWF 1002 H vertical machining centre we have for sale. Contact us for further details.

weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine

This 4-axis C.B. Ferrari B16 was manufactured in 1998. It features an X-axis travel of 1,050 mm, Y-axis travel of 420 mm, and Z-axis travel of 420 mm. The machine is equipped with an electrospindle capable of reaching a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the C.B. Ferrari B16 vertical machining centre we have for sale. Contact us for further details.

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

Control Brother C-00 Travel X/Y/Z: 650 x 400 x 435 mm 2-fold pallet changer 800 x 400 mm Spindle speed: 16,000 min-1 Tool magazine for 40 Wkz., BT 30 IKZ 70 bar 3D probe OMP 40 Electronic handwheel Chip conveyor

turning diameter:250 mm swing diameter:250 mm turning height:200 mm total power requirement:37,7 kW chuck diameter:315 mm spindle speed max.:5500 1/min travel -x axis:625 mm travel -y axis:+100/-80 mm travel -z axis:250 mm worktool system:VDI 30+40 weight of the machine ca.:8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024

Key data: 760 mm, 510 mm, 570 mm

Inv. Num. : 9328 Type: ACE VC 500 Producer: DAEWOO Created: 2005 Parameters: Control System: FANUC Series 21i-MB Work table length: 860 mm Work table width: 560 mm Maximum table load (even): 300 kg Spindle drive power: 15 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 760 mm Y-axis travel: 510 mm Travel Z axis: 570 mm

max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024

turning diameter:1000 mm swing diameter:1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed range I: 5 - 350 rpm. Speed range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis

Key data: 1270 mm, 610 mm, 720 mm

Inv. Num. : 9330 Type: MCV 1270 R Producer: MAS Generated: Parameters: Work table length: 1500 mm Work table width: 670 mm Maximum table load (uniform): 1200 kg X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Machine height: 3330 mm Machine length: 5000 mm Machine width: 3600 mm Machine weight: 11800 t Equipment: Grips Vise

A vertical EMAG CNC lathe is available. Workpiece length range: 22mm-100mm, turning length: 100mm, max. swing diameter: 220mm, tool stations: 12, measuring length: 94mm, spindle speed: 6500rpm. Machine dimensions X/Y/Z: approx. 2400mm/3300mm/2950mm, weight: approx. 10000kg. Including tool setting probe, chip conveyor, 120bar high-pressure pump, Heilig workpiece shuttle system with two stations and coolant system. Documentation available. An on-site inspection is possible.

A vertical CNC lathe by Emag is available. Workpiece length range: 22mm-100mm, turning length: 100mm, speed: 6500rpm, measuring length: 94mm, max. swing diameter: 220mm, tool stations: 12, weight: approx. 7000kg. Including tool setting probe, carousel workpiece transfer system, chip conveyor and coolant system. Documentation available. An on-site inspection is possible.

faceplate diameter:800 mm power requirement:110 kW weight of the machine ca.:37.000 / total 52.000 t transport measurements machine:5,07 x 2,98 x 3,90 m clamping diameter:800 mm :Ø 800 x 720 mm Tool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis

A vertical CNC lathe Emag is available. Speed: 4500rpm, Tool stations: 12, Travel X/Z: 570mm/200mm, Max. chuck diameter: 260mm, Max. turning diameter: 260mm, Max. machining diameter: 220mm, Max. workpiece length: 110mm, Rapid traverse X: 60m/min, Rapid traverse Z: 30m/min, Feed force: 5.5kN, Max. workpiece weight: 120kg, Weight: approx. 6500kg, Control: Siemens Sinumerik 840. Documentation available. An on-site inspection is possible.

max. wheel diameter:900 mm max. module:10 weight of the machine ca.:8200 kos. hob dia. - max.:190 mm cutter length max.:320 mm milling spindle speeds (infinitely variable):13-80 U/min workpiece length - max.:750 mm max. workpiece diameter:150 mm Counter holder milling mandrel is missing

A vertical EMAG CNC turning machine with automation is available. Speed: 6500rpm, workpiece length range: 22mm-100mm, turning length: 100mm, measuring length: 94mm, max. swing diameter: 220mm, max. pump pressure: 120bar, tool stations: 12, loading stations: 2, robot type: M-10iA, control: Fanuc 16i-TB, weight: approx. 10000kg, power-on hours: 84847h. Including high-pressure pump, tool setting probe, chip conveyor, coolant system, workpiece shuttle system and robot automation. Documentation available. An on-site inspection is possible.

Stackable vertical tank made of 316 stainless steel with a capacity of 1250 liters. Upper bottom feeding by removable manhole. Bottom Bottom Discharge with 63.5 mm Diameter (2.5") Butterfly Valve With a stainless steel structure with forks for easy mobility with a bull or pallet truck and the possibility of stacking. Technical characteristics: Volume 1250 L Klopper fund type Stackable Structure Envelope (1112x1112x1900 mm) Body outer diameter 1110 mm Body height 1500 mm Transportation Information Length 1112 mm Width 1112 mm Height 1900 mm New

TECHNICAL DATA: Working dimensions: max. 1200 x 100 x 65 mm 05 Spindles with M10 right-hand thread 02 Spindle motors Complete with feeding device 03 Vertical Pressure Devices 03 Horizontal Pressure Devices Installed power: 6 kW

faceplate diameter:1600 mm power requirement:80 kW weight of the machine ca.:25 t dimensions of the machine ca.:4,4 x 4,62 m max. workpiece diameter:2000 mm max. diameter of face turning:1800 mm tool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis

max. wheel diameter:300 mm max. module:7 weight of the machine ca.:15 t table turning speeds:100 U/min table diameter:180 mm hob turning speeds:750 U/min max. hob diameter:160 mm cutter length max.:230 mm Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion

max. wheel diameter:300 mm max. module:7 weight of the machine ca.:15 t table turning speeds:100 U/min table diameter:180 mm hob turning speeds:750 U/min max. hob diameter:160 mm cutter length max.:230 mm Liebherr LC300 with loading automation Machine without counter holder Used to work with oil

Key data: 830 mm, 530 mm, 580 mm

Manufacturer: ROMI Model: D 800 Year: 2014 Condition: Used Stock number: 9342 Control system: Fanuc 0i-MD Hours: 18832 h Work table length: 914 mm Work table width: 500 mm Spindle drive power: 22.4 kW Number of axes: 4 pieces Maximum vertical spindle speed: 10000 1/min X-axis travel: 830 mm Y-axis travel: 530 mm Travel travel Z-axis: 580 mm Machine weight: 5800 kg Equipments: Chip conveyor High-pressure central cooling (30 bar) 4. Axle ROMI MGR 230 v 4.0 Renishaw OMP 40-2 Workpiece Probes Aspira OMC 1200 Suction Tool holders and cutting tools (22 pieces in total)

The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm accordin ...

swing diameter:400 mm turning height:950-1500 mm Turning length:210 mm x-travel:310 mm z-travel:350 mm spindle drive:48 kW spindle turning speed range:20-3500 U/min weight of the machine ca.:11 t dimensions of the machine ca.:4,5 x 3,5 x 2,7 m

The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm accordin ...

swing diameter:400 mm turning height:950-1500 mm Turning length:210 mm x-travel:310 mm z-travel:350 mm spindle drive:48 kW spindle turning speed range:20-3500 U/min weight of the machine ca.:11 t dimensions of the machine ca.:4,5 x 3,5 x 2,7 m

roll diameter:420 mm throat:400 mm workpiece height:325 mm table surface area:615 x 615 mm table swivelabel +/-:10/45 ° table - inclinable:+/- 20 ° cutting speed:20 - 2500 m/min total power requirement:2 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,95 x 0,65 x 1,83 m

Key data: 700 mm, 400 mm, 330 mm

Manufacturer. FANUC Model: Robodrill 4AX Year: 2008 Condition: Used Stock number: 9359 Number of axes: 4 pieces Maximum vertical spindle speed: 24000 1/min X-axis travel: 700 mm Y-axis travel: 400 mm Travel travel Z-axis: 330 mm Workpiece diameter: 300 mm Machine weight: 2100 kg

max. wheel diameter:130 mm max. module:3 total power requirement:15 kW weight of the machine ca.:6 t dimensions of the machine ca.:2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm 2500 mm 2170mm Accessories : Hydraulical workpiece clamping ...

Key data: 600 mm, 500 mm, 400 mm

Manufacturer: MAHO Model: MAHOMAT 600 Year: 1990 Condition: Used Stock number: 9362 Control system: Philips CNC 432 Work table length: 900 mm Work table width: 600 mm Maximum table load (even): 500 kg Spindle drive power: 15 kW Speed: 6000 1/min X-axis travel: 600 mm Y-axis travel: 500 mm Travel Z axis: 400 mm Cone: ISO 40 Tool magazine capacity: 24 Machine height: 2900 mm Machine length: 3600 mm Machine width: 3100 mm Machine weight: 5900 kg

30 m3 30 m3 stainless steel tank with hermetic heat insulation and off-center agitation. About 4 legs. Total capacity 30000 L Heating, cooling and insulation Heat Burning Equipment dimensions Inner diameter 3100 mm Body height 4000 mm Upper depth thickness 4 mm Body thickness 3 mm Bottom thickness 4 mm Transportation Information Width 3300 mm Height 5292 mm Documentation Plans In your state