vertical borer used for sale

This 3-axis RECKERMANN RBZ 1050 was manufactured in 2007. It features a Heidenhain TNC 530 control system, ensuring precision and reliability in operations. The machine is in very good condition and fully operational. If you are looking to get high-quality milling capabilities, consider the RECKERMANN RBZ 1050 vertical milling machine we have for sale. Contact us for further details.

MITSUBISHI Control Excluding machining and tooling supports AVAILABILITY END OF OCTOBER 2026 Auction-ID: A7-50204-12

This 3-axis AXA Vario vertical machining centre was manufactured in 2000. It features an internal coolant supply and is equipped with a Heidenhain TNC 410 M Digital control system. The machine is in very good condition and fully operational. If you are looking to get high-quality machining capabilities, consider the AXA Vario vertical machining centre we have for sale. Contact us for further details.

Fast tool change, FANUC Series Oi-MC control Excluding machining supports, magnetic tables and tools AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-17

This 3-axis HEDELIUS BC 50 was manufactured in 2001. It features an internal coolant supply and is equipped with a Heidenhain TNC 415 control system. If you are looking to get high-quality machining capabilities, consider the HEDELIUS BC 50 vertical machining centre we have for sale. Contact us for further details.

Quick tool change, OKUMA OSP-U100M control Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-16

This 3-axis WEMAS VZ 860 was manufactured in 2014. It features an internal coolant supply and is equipped with a Heidenhain TNC 530 i control system, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 860 vertical machining centre we have for sale. Contact us for further details.

With double pallet, FANUC Series 18i-MB control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-10

MITSUBISHI Control Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-11

Equipped with: has a table of 1350 × 320 mm, a longitudinal travel of 700 mm, a transverse travel of 240/260 mm, a vertical travel of 370 mm, 18 spindle speeds of 31.5–1600 rpm, a main motor of 7.5 kW, a number 3 spindle cone, a spindle bore of 29 mm, a swivel range of ±45°, a maximum workpiece weight of 250 kg Auction-ID: A1-47363-79

Press pressure 60ton; max bale weight 500kg; bale size: 120x80x80 cm; filling opening: 116x55 cm; Auction-ID: A1-47363-10

travel -x axis: 550 mm travel -y axis: 400 mm travel -z axis: 400 mm a-axis: +/- 120 ° C-axis: 360 ° control: HEIDENHAIN - TNC 640 number of spindle speeds: 24.000 numbers of positions in the tool changer: 48 tool taper: HSK-A50 5-axis machining center | CHIRON - FZ12-S equipped with ITC (70 bar), NC swivel rotary table, 48-way tool changer & chip conveyor. The machine has only 3.606 H spindle hours. Additional equipment: - BLUM LaserControl NT - BLUM TC52 Touch Probe - Scraper Belt Chip Conveyor - KF150/500 Cooling System The machine is in very well-maintained, like-new condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ12S| FZ 12-S | FZ 12 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

The machine is in good technical condition; it can be tested by prior arrangement.

Incl. tool changer and the tool holders located inside, with chip conveyor and coolant system. Attention: The machine can be transported on a standard truck! Additional technical specifications: • Nominal current: 80 A • Table: with 9 slots • attached clamping plate, dimensions: 1200 x 810 mm • with three ALLMATIC machine vices, jaw widths: 160 mm

Control: Manufacture: HEIDENHAIN iTNC 530 x-travel: 860 mm y-travel: 560 mm z-travel: 600 mm table-size: 1000x560 mm spindle turning speed range: 10000 U/min tool magazin:: 24 weight of the machine ca.: 6.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Incl. chip conveyor, incl. 3-D touch probe and incl. the tool holders located in the tool changer! Attention: without the machine vises seen in the photos! Attention: the machine can be transported on a standard truck!

The machine is in good technical condition, after prior agreement it is possible to test it. 25 micron filter, chip conveyor belt, cooling through the spindle center, pressure 300 psi, wireless probe for tools and workpieces, side tool changer, ISO 40 taper, 30+1 tools, synchronized thread cutting, rotary gauge, 1x clamping vice, 20x tool holders

The machine is in good technical condition, testing is possible by prior arrangement. Chip screw conveyor Programmable coolant nozzle Power failure detection module Remote control via rotary knob with color LCD display Direct thread cutting Spindle 15,000 rpm, ISO 40 taper, 30 hp (22.4 kW) vector drive, direct "inline" drive Renishaw intuitive wireless probe system 2x clamping vice 30x tool holder

Attention: The machine can be transported on a truck up to 3000 mm wide! Additional technical specifications: • table with 5 slots • with mounted plate, plate dimensions: 900 x 550 mm • incl. vise, jaw width: 125 mm

This Victor Vcenter-70APC Vertical Machining center was manufactured in the year 2007 in Taiwan. It is controlled by a Fanuc Series Ou-MC control unit and has 3 axis. The machine has a spindle speed of 8000 rpm. This machine has head repaired, Z-Spindle, telescopic with new wiper blades and the grippers of the changing arm also repaired. Includes an internal cooling, new bearings and new tie rod springs.

Attention: the machine can be transported on a truck up to 3000 mm width! Additional technical specifications: • Feed rate in X/Y/Z: 20 - 15,000 mm/min • Setup mode X/Y/Z: 20 - 2000 mm/min • with in total 32-station tool changer (2 x 16 places) • max. tool diameter when all slots in magazine 1 are occupied: 130 mm • max. tool diameter when all slots in magazine 2 are occupied: 80 mm • max. tool length from spindle nose: 315 mm • max. tool weight at automatic tool changing: 8 kg • max. total tool weight in magazine: 160 kg • T-slot spacing: 63 mm

This 4-axis HAAS MIKRON VCE 750 was manufactured in 1997. It features a table surface of 900x350 mm, a table capacity of 340 kg, and movements of X 750 mm, Y 410 mm, and Z 500 mm. The spindle operates at 8000 rpm with a power of 7.5 kW. Regular maintenance and recent updates ensure reliability. Consider the opportunity to buy this HAAS MIKRON VCE 750 vertical machining centre. Contact us for more information about this machine.

Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compe ...

Pressing force: 185kN, filling opening dimensions: 1195x541mm, max. bale weight depending on material: 200kg, max. bale dimensions: 1200x780x700mm, throughput capacity: 2 to 5 bales/h, idle cycle time: 35s, strapping: 4 fold with polyester strap, pressing capacity at idle: 68m³/h, pressing chamber dimensions: 1200x780x1300mm, voltage: 3x 400V, motor power: 3kW, length: 1700mm, width: 1046mm, height: 2370mm, weight: 994kg. An on site inspection is possible.

MIKRON UCP 600 ist ein Vertikal Bearbeitungszenter, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. 5 Achsen für 5-Seiten-Bearbeitung; Rundtisch Ø400 mm; Verfahrwege X 600 mm, Y 450 mm, Z 450 mm; Tischbelastung 400 kg; B-Achse -115/+30°; C-Achse 360°. Werkzeugwechsler TC 30; Spindel stufenlos 50–20.000 t/min; Spindelmotor 5,5 kW; Gesamtbedarf 18 kW; Vorschub 22 mm/min; Eilgang 22 m/min; Anschluss 3x400 V 50 Hz; Gewicht ~6500 kg; Abmessungen 2500×1600×2650 mm; Schallpegel 75 dB(A). Ausstattung: Kühlmitteleinrichtung, elektronisches Handbedienpult, elektronisches Handrad. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrmacherei, Maschinenbau. Technische Daten ohne Gewähr

This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details.

60 tool positions, tool clamping force 25 kN, control voltage 24 V, main fuse 160 A, connected load 60 KVA, rapid traverse/feed X/Y/Z axis each 20000 mm/min with 15000 N Auction-ID: A1-50260-7

This 3-axis DMG DECKEL MAHO DMC 635V vertical machining centre was manufactured in 2007. It features a tool holder SK 40, a 32-position random tool changer, and a spindle speed of 10,000 RPM. The machine dimensions include a 790 X 560 mm table surface and a load capacity of approximately 600 kg. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine.

Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat comp ...

This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Two Chiron units in combination with two x Fanuc M - 20iA (2011)

This 5-Axis QUASER MV204-CU/12 vertical machining center was manufactured in 2007. It boasts X, Y, and Z-axis travels of 700 mm, 660 mm, and 480 mm respectively, with a table diameter of 500 mm and a 32-position tool magazine. The machine features a SK 40 spindle taper, coolant inside the spindle, and rapid traverse rates of 30 meters/min. Ideal for intricate milling tasks, the QUASER MV204-CU/12 machine we have for sale ensures high precision and efficiency. Contact us for further details.

This 3-axis CHIRON DZ 18 W MAGNUM was manufactured in 1998. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 630 mm. The machine includes a table size of 1250 × 850 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ 18 W MAGNUM vertical machining centre we have for sale. Contact us for further details.

Manufacturer KONDIA Model A-6 Year 2015 CNC HEIDENHAIN TNC 530 HSCI Table Table surface 800 x 400 mm. Number of T-Slots 3 T-slots (width, distance) 18.125 mm. Table-floor distance 885 mm. Table distance – spindle nose (min/max) 140 / 650 mm. Maximum weight allowed on table 450 kg. Routes and advances Longitudinal travel (X) 600 mm. Cross travel (Y) 410 mm. Vertical travel (Z) 500 mm. Fast forward X/Y/Z axes 30,000 mm./min. Head Spindle taper ISO 40 DIN 69871 Maximum spindle speed 12,000 rpm Spindle power 10 / 17 kW Autoloader Tools Chain Type Random Change Warehouse Positions 20 Maximum tool width with adjacent free positionsq 135 mm. Maximum tool width without adjacent free positionsq 85 mm. Maximum tool length 250 mm. Maximum tool weight 6 kg Equipment Internal cooling 20 BAR INCLUDED Chip evacuator INCLUDED Water gun cleaning parts INC ...

This 4-axis Avia VMC 1000 was manufactured in 2017. It features a generous X-axis travel of 1000 mm, Y-axis travel of 540 mm, and Z-axis travel of 620 mm. The machine is equipped with a robust table size of 1200 x 540 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Avia VMC 1000 vertical machining centre we have for sale. Contact us for further details.

Key data: 800 mm, 500 mm, 540 mm

CNC Vertical Machining Center MIKRON VCE 800 W Pro With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 500 Z 540 Speed range: 30 – 10,000 rpm continuously variable ( SK 40 ) With the following accessories: Rigid angle table 910 mm x 500 mm clamping surface Vertical tool changer with 24 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Direct displacement measuring system (Heidenhain glass scales) Electronic handwheel Spindle cooling unit Chip rinsing gun Signal lamp Spiral Screw Conveyor Coolant Setup Operating Instructions

This 3-axis Feeler PVF 800 vertical machining center was manufactured in 2012. It features a spindle speed of up to 8,000 rpm, a tool changer with 22 tools, and rapid traverse rates of 24/20/15 m/min in X/Y/Z. The machine includes a Renishaw TS27R automatic tool setter and through-spindle cooling. If you are looking to get high-quality milling capabilities, consider the Feeler PVF 800 machine we have for sale. Contact us for more information about this machine.

This 3-axis RECKERMANN VMC 850 was manufactured in 1999. It features an internal coolant supply and is equipped with a Heidenhain TNC 430 control system, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the RECKERMANN VMC 850 vertical machining centre we have for sale. Contact us for further details.

control: SIEMENS - 840 D - - -: - - - - - - - - -: - - - - - - 5-axis simultaneous machining center | SPINNER - U 620 equipped with ITC, NC swivel rotary table, tool changer & chip conveyor. The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U620| U-620 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Hurco VM20i was manufactured in 2014. It features an X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 400 mm. The machine includes a table size of 1,170 x 507 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VM20i vertical machining centre we have for sale. Contact us for further details.

Manufacturer HERMLE Model C40 U Dynamic Year 2006 CNC control HEIDENHAIN iTNC 530 Table Table surface Ø 800 mm. Tilting rotary table INCLUDED Maximum weight on table 1400 kg Table rotation (C-axis) 0.001º (±360º) Oscillation field (B-axis) +25 / -110 º Direct Measurement System INCLUDED Maximum part diameter 840 mm. Routes and advances Strokes (X/Y/Z) 850/700/500 mm X, Y, Z axis fast feed 60,000 mm/min Head Head speed 18,000 r.p.m. SK 40 Head Cone DIN 69871 Main motor power 15 W Main torque 130 Nm Equipment Automatic tool loader INCLUDED No. of positions in tool loader 38 Internal cooling 80 Bar INCLUDED Tank with paper filter 200 l. INCLUDED Active cooling control cabinet INCLUDED Infrared measurement probe part M&H INCLUDED Blum Laser Probe Measurement Tool INCLUDED Chip evacuator INCLUDED Cleaning gun with pump 2 bar 40 l/min INCLUDED 3D Quick ...

This 3-axis MORI SEIKI DuraVertical 5100 was manufactured in 2007. It features an X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a robust table size of 1350 x 600 mm and a maximum table load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5100 vertical machining center we have for sale. Contact us for further details.

Robot Coupe R45 Vertical Cutter Mixer Stainless, 45L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph

This 5-axis SPINNER U5-1530 was manufactured in 2021. It features an impressive X-axis travel of 1530 mm, Y-axis travel of 530 mm, and Z-axis travel of 465 mm. The machine includes a fixed rigid table combined with a 2-axis rotary/tilt table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-1530 vertical machining centre we have for sale. Contact us for further details.

Robot Coupe R30 Vertical Cutter Mixer Stainless, 30L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph

This 3-axis Hurco VMX24 vertical machining centre was manufactured in 2004. It features an impressive X-axis travel of 610 mm and Y-axis travel of 508 mm, with a maximum spindle speed of 10,000 RPM. The machine includes advanced control options such as synchronous tapping and advanced velocity control. If you are looking to get high-quality machining capabilities, consider the Hurco VMX24 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Hurco VMX 24i was manufactured in 2015. It features an X-axis travel of 610 mm, Y-axis travel of 508 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 760 x 508 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 24i vertical machining centre we have for sale. Contact us for further details.

Loose 4th axle. Auction-ID: A1-40982-10

EUMACH MC 1050 P vertical machining center -CE marking -Built in 1999 -Heidenhain 426 -Fourth axis NIKKEN CNC 170 ZA / programmable directly from the controller -Oil cooler -Complete documentation -COMPLETE TECHNICAL DATA - SEE PHOTOS Dimensions: LxWxH 2.8x3.45x2.8 meters / Weight 6500Kg

Professional MX chisel mortising machine, designed for carpentry work and the production of mortises and assemblies in wood. Robust construction on metal frame Three-phase power supply 380 V Vertical machining head Manual lowering by large lever Tool-holding chuck Adjustable work table Guide/backgauge Workpiece clamping system Manual depth and positioning adjustment Longitudinal movement of the table On/off controls Emergency stop Heavy base for stability Professional workshop machine Auction-ID: A3-46126-37244

Behr ST 150 Vertical Shaping Machine -Masch.-Nr: 096, -large stroke: 150 / 175 mm -Tilt adjustment of the ram in both directions: 5 / 8 degrees -Height table / UK ram guide: 260 mm -Rotary table diameter: 340 mm -Longitudinal displacement of the table: 320 mm -3 lifting speeds: 17 / 54 / 108 H/min. -Gr. groove width: 16 / 26 mm -External dimensions approx.: 960 x 1530 x 2030 mm with - Feeds in X and Y (back and forth) -Speed adjustable - Adjustment of rotary table manually