vertical band saw used for sale

A CNC vertical machining center Takumi is available. Travel X/Y/Z: 1800mm/850mm/750mm, spindle nose to table distance range: 200mm-950mm, spindle center to column distance: 920mm, table dimensions X/Y: 2000mm/800mm, max. table load: 2200kg, tool holder: NT50, speed: 6000rpm, feed rate: 5m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 5700mm/3850mm/3350mm, weight: approx. 16500kg, control: Heidenhain, operating hours: approx. 50000h, spindle hours: approx. 25000h. Documentation available. An on-site inspection is possible.

Internal number: 69080, with anti-hole protection, safety harness release strap, abrasion-resistant solid rubber tires, gradeability: 25%, swivel range: 345°, allows flexible working over obstacles, compact design, almost silent operation and precise control ideal for indoor use Auction-ID: A1-46342-45

Technical Specifications X-axis travel: 1250 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Spindle nose distance from table table: 100 - 850 mm X-Y-Z fast feeds: 15 m/min Maximum spindle speed: 4000 rpm; 26 kW; ISO 50 - DIN Pallet: N.2 Table dimensions: 650 x 1400 mm Maximum load allowed: 1500 Kg High pressure: 30 Bar Random tool magazine: 41 positions Maximum tool diameter: 120 (200) mm Maximum tool length: 400 mm Maximum tool weight: 20 Kg Control: FANUC 16i-M Approximate weight: 16750 Kg Approximate footprint: 7135 x 5300 x 3426 mm Accessories: Chip conveyor ; Range change Item sold in unverified status Auction-ID: A1-44614-3

This 5-axis DMG Ultrasonic 10 was manufactured in 2010. It features a maximum spindle speed of 40,000 rpm and a travel of 220 x 20 x 280 mm. The machine is equipped with a Siemens 840D solutionline control and has a maximum table load of 10 kg. If you are looking to get high-quality machining capabilities, consider the DMG Ultrasonic 10 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HERMLE U 630 T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 900 x 528 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE U 630 T vertical machining centre we have for sale. Contact us for further details.

This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details.

This 3-axis Datron M8A was manufactured in 2013. It features an impressive X-axis travel of 1020 mm, Y-axis travel of 700 mm, and Z-axis travel of 240 mm. The machine is equipped with a high-speed spindle capable of reaching 40,000 rpm and has a tool magazine with 18 positions. If you are looking to get high-quality machining capabilities, consider the Datron M8A vertical machining centre we have for sale. Contact us for further details.

This 5-axis Kitamura Mycenter-4XT was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 610 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 15,000 rpm and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter-4XT vertical machining centre we have for sale. Contact us for further details.

This 3-axis MILLTRONICS RH 20 vertical machining centre was manufactured in 2014. It features a substantial table size of 1,372 mm x 508 mm and impressive X-axis travel of 1,016 mm. The machine is equipped with a 24-station automatic tool changer and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the MILLTRONICS RH 20 machine we have for sale. Contact us for further details.

Internal number: 69079, with anti-hole protection, fastening for the safety harness, abrasion-resistant solid rubber tires, climbing ability: 25%, swivel range: 345°, allows flexible working over obstacles, compact design, almost silent operation and precise control ideal for indoor use Auction-ID: A1-46342-9

Vertical injection moulding machine manufactured in 2006. This Kloeckner Desma 968.250 ZO features a clamping force of 2700 kN and an injection volume of 2000 cm³. It includes additional equipment such as 2 ejectors and a vacuum pump. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma 968.250 ZO machine we have for sale. Contact us for further details.

In working order. Auction-ID: A3-43525-6046

-Flexible CNC plate machining center -The machine consists of two processing units (top, bottom) -Equipped with a total of 82 individually retrievable tools -The skipper is able to process two workpieces at the same time from above and below -Dimensions according to data sheet -Work and pressure table -Side work tables -Stop system -Electronic control of workpiece thickness -Digital drives -Central lubrication -Control -Automatic discharge with belt -Air cushion table -Bottom processing unit-Left slot -Upper processing unit-Left slot -Bottom processing unit-Right slot -Upper processing unit-Right slot -Horizontal glue dowel insertion unit for dowels with 8 mm diameter -Surveying system - NC-HOPS programming system -Version with left-hand automatic feed feed -Horizontal drilling and milling Auction-ID: A7-46409-13

The storage tank is in good condition. Was used for storing diesel with feed pump. The tank has a storage capacity of 2500L. Auction-ID: A3-43525-34002

Generator: Agiepuls 60 HSF, travel X/Y/Z: 350mm/250mm/350mm, table dimensions X/Y: 600mm/450mm, max. workpiece weight: 400kg, max. workpiece dimensions X/Y/Z: 840mm/600mm/250mm, max. electrode weight: 100kg, machine dimensions X/Y/Z: approx. 2450mm/1750mm/3000mm, weight: approx. 4000kg. The machine has PCB damage. Documentation available. An on-site inspection is possible.

Internal number: 69143, with perforated protection, fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (retracted): 6.5 cm, climbing ability: 25 %, compact dimensions, almost silent operation, ideal for indoor use Auction-ID: A1-46342-13

VOLLENDA-WERK GmbH vertical form-, fill- and sealing machine, type: Schlauchbeutelmaschine für Nettowaage V5/10P-966, product: frozen fruits, year of construction: 2004, 400 V, 3 Ph, 50 Hz, 35 A, seal width: 550 mm, film width: 1070, total dimensions: 1900 mm x 3100 mm x 4120 mm, with outfeed elevating belt with dividers, height dividers: 10 mm, distance between dividers: 410 mm, belt width: 600 mm, elevating height: 930 mm, total dimensions: 2900 mm x 1000 mm x 950 mm.

Internal number: 69090, with anti-hole protection, fastening of the safety harness, abrasion-resistant solid rubber tires, gradeability: 25%, swivel range: 345°, allows flexible working over obstacles, ideal for indoor use due to compact design, almost silent operation and precise control Auction-ID: A1-46342-3

Internal number: 69151, with perforated protection, fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (retracted): 6.5 cm, climbing ability: 25 %, compact dimensions, almost silent operation, ideal for indoor use Auction-ID: A1-46342-12

CONTROLS   CNC controls NUM 1060 WORKING RANGE TURNING   swing diameter (max): 2000 mm   workpiece weight max.: 25000 kg CROSS BEAM SLIDE   - rotation speeds (min): 2 /min   - rotation speeds (max): 450 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4100 mm   space requirements -front/back-: 3500 mm   total height: 5600 mm

Hänel Rotomat 400 Paternoster The Hänel Rotomat 400 is a vertical carousel (paternoster) that works according to the principle of "goods to the user" and is used both for industrial storage and as an office lift for archiving. The system makes optimal use of the available room height to maximize storage space in a minimum footprint. Areas of application The Hänel Rotomat 400 is used across all industries: Industry: For the storage of tools, measuring instruments, electronic components and small parts. Office & Administration: As an automatic archiving system for hanging files or file folders. Medical: For the sterile storage of surgical instruments. Overall dimension L: 260 cm Overall dimension B: 130 cm Overall dimensions H: 285 cm Permissible. Shelf load: 150 kg Connected loads: 3~ N+PE 400V / 50HZ/ 5.5 KW Year: 2004 Dismantling and removal by buyers Dism ...

The machine is in good technical condition, after prior agreement it is possible to test it. CONTROL SYSTEM Control language - completely in Czech 3D simulation - yes Programming type - Dialogue and NC TABLE Table dimensions - 1,270 x 610 mm T-slots - 5 x 18 mm Max. table load - 1,350 kg Distance between the spindle face and the table - 150 - 760 mm TRAVELS X-axis - 1,070 mm Y-axis - 610 mm Z-axis - 610 mm SPINDLE Max. spindle speed - 12,000 rpm Spindle taper - SK40 TOOL MAGAZINE Number of tools - 24 Max. tool diameter - 80 mm Max. tool weight - 7 kg

The machine is in good technical condition, after prior agreement it is possible to test it. 0 Baumuller ball screws, spindle diameter 60 mm, SK 40, power 5.5kw/11 kW, torque 100Nm. Rotary tool changer 12. 3 axes and 4th axis only control board without 4th axis table..

ID3781 Klemm KR500 year/Baujahr 2005 5,800 hours/hours Anchor drilling rig, KH4 rotary drive, hydraulic power pack with electric motor type PP-37-E (on crawler tracks), drilling gun mount 2 m and 1.8 m, 1 complete undercarriage with crawler tracks (new) as spare parts package, spare parts package accessories for KR500 Anchor drilling rig, rotary actuator Klemm KH4, hydraulic gregeat power pack with electric motor type PP-37-E (on crawler track), drilling mount 2 mtr. and 1.8 mtr., 1pc. complete Undercarriage with crawler undercarriage (new) as ET Package, ET Package Accessories for KR500

Control Mitsubishi 64S Travel Distances X/Y/Z 600 x 400 x 460 mm Table size 700 x 410 mm Table load 250 kg Spindle speed 12,000 min-1 Tool magazine for 24 Wkz. BT 40 IKZ 20 bar Suction Chip conveyor

Spindle vertical stroke 150 mm Table size 1300x450 mm For ISO 40 cones Max piece weight about 1000 kg Accessories and tools INCLUDED DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-28

Machine type: CNC Vertical Machining Center Manufacturer: Tongtai Model: TMV-720A Control: Heidenhain CNC control Year: n/a Serial number: n/a Working hours: n/a Table size: approx. 900 x 400 mm Spindle: Vertical spindle Tool holder: SK40 (visual assumption) Tool changer: Yes, side-mounted tool rack Number of tool holders: approx. 20+ pcs included Coolant system: Yes, internal coolant nozzles Chip management: Chip conveyor installed Coolant unit: External filtration unit (Granch Filtration) Control panel: Heidenhain with manual pulse generator (MPG) Emergency stop: Yes Status light: Yes Accessories: Tool holders, coolant system, filtration unit Remarks: Machine in used condition, signs of wear and coolant residues visible. Control boots and initializes. Includes multiple tool holders and external coolant filtration system. Own mass: approx. 5 ...

! PAY ATTENTION Delivered without the ENERPAC hydraulic unit and the 2Hydraulic clamps Tool holder: BT 40 JIS B 6339 (MAS 403 BT) - [ISO 7388-2] Possibility for 20 Tools, comes without tool(holders) Auction-ID: A1-41995-142

Make: Big-Plus (Taiwan) Type: CNC Vertical Machining Center Model: 850 VMC Serial number: BM110CE01 Control: FANUC Series 0i-MD Technical data: - X / Y / Z travel: approx. 850 mm / 500 mm / 500 mm - Table size: approx. 1000 x 500 mm - Spindle speed: 10,000 rpm - Main voltage: 415 V AC - Power requirement: 20 kVA - Air required: approx. 6–8 kg/cm² Equipment: - Vertical spindle (Big-Plus spindle system) - Tool changer (carousel type) - Coolant system - Enclosed working area with sliding door - Manual pulse generator (handwheel) Control panel: - FANUC interface with display and full keyboard - Feed / rapid / spindle override controls - Emergency stop and cycle controls Condition: Used Auction-ID: A7-45993-49

Make: Dahlih Type: Vertical Machining Center (VMC) Model: DL-MCV1200 Year: 2010 Control: Heidenhain CNC control Technical data: - X-axis travel: approx. 1,200 mm - Y-axis travel: approx. 600 mm - Z-axis travel: approx. 600 mm - Table size: approx. 1,300 x 600 mm - Spindle speed: up to approx. 8,000–10,000 rpm (typical for model) - Power: 12 kVA (according to plate) Equipment: - Fully enclosed machining cabin with double doors - Heidenhain control panel with screen & keyboard - Electronic handwheel - Tool holders rack (side mounted) - Chip conveyor - Coolant system - Working light Application: - CNC milling and machining of metal components - Toolmaking and precision part production Condition: Used Auction-ID: A7-45993-42

Make: Dugard Type: CNC Vertical Machining Center Model: Eagle 1000 VMC Serial number: MC97BF06 Control: FANUC Series 0i-MC Technical data: - X / Y / Z travel: approx. 1000 mm / 500 mm / 500 mm (typical for model class) - Spindle speed: 8000 rpm - Main voltage: 415 V AC - Power requirement: 20 kVA - Air required: 5–6 kg/cm² Equipment: - Vertical spindle - Tool holders included (side mounted rack) - Coolant system - Manual pulse generator (handwheel) - Enclosed working area with sliding door Control panel: - Full FANUC keyboard and display - Feed / rapid / spindle override controls - Emergency stop and cycle controls Condition: Used Auction-ID: A7-45993-48

Type: CNC Vertical Machining Center Brand: EMSIL Techtrans Model: DMC2100H Control: FANUC Series 18i-MB Machine Type: Super Vertical Machining Center Axes: 3-axis (X / Y / Z) Equipment: - Enclosed working area with sliding doors - Large T-slot worktable - Automatic tool interface (tool holder included) - CNC control panel with screen and full keypad - Emergency stop - Coolant system with adjustable nozzles - Electrical cabinet integrated - Status signal tower (stack light) Displayed Data (at time of inspection): Run time: approx. 19,568 h Part count: 84,933 Condition: Used Remarks: Alarm displayed (pressure low); machine not tested; sold as seen Auction-ID: A7-45993-78

Matsuura MAM72-25V 5-axle Tool holder: BT 40 JIS B 6339 (MAS 403 BT) - [ISO 7388-2] Possibility for 180 tools, comes without tool(holders) Steering system: Fanuc Series 30i Year of construction: 2004 In combination with BMO: including 0-point tensioning system with 1 pneumatic Schunk clamp Power on: 99,802 hours Run time: 53,875 hours Cutting time: 27,631 hours Diameter ø250 Spindle : 12,000 rpm Internal cooling from the spindle Includes Renishaw probe (type: OMP60) BMO Titanium 50 Automation Robot: Yaskawa DX200 Year of construction 2016 The BMO leaves with 1 zero point clamping system and 1 long clamp Dimensions BMO 2600 x 4700 x 2700 mm. including PC10 automation that has not been used. Auction-ID: A1-41995-140

Profoto Styleshoots Vertical photography setup for E-commerce in the fashion industry. br> Fixed photography setup with: Powder-coated frame Integrated MAC Integrated Canon's EOS full-frame camera 4 photography lighting lamps I-pad for complete operation such as taking photos, exposing and storing photos Mobile tripods (2x) with mannequins (3x) Comprehensive operating manual Extra MAC (as a reserve) Complete, working and immediately deployable Overall size (L x W x H): 410 x 205 x 260 cm The seller can provide a detailed explanation and demonstration. Dismantling must be done by the buyer, but will be supported and helped by the seller. Auction-ID: A1-40111-4

Make: Dahlih Type: Vertical Machining Center (VMC) Model: DL-MCV720 (720MCV) Year: 2006 Control: Heidenhain CNC control Technical data: - X-axis travel: approx. 720 mm - Y-axis travel: approx. 400 mm - Z-axis travel: approx. 450 mm - Table size: approx. 900 x 400 mm - Spindle speed: up to 15,000 rpm (according to plate) Equipment: - Enclosed working area with sliding door - CNC control panel with keyboard & display - Coolant system - Chip conveyor - Work light Application: - CNC milling operations for metal parts - Precision machining in toolmaking and production Condition: Used Auction-ID: A7-45993-41

Table size: 800x400 mm Tool changer 12-speed Electric handwheel Auction-ID: A1-46607-98

4-axis dividing head Auction-ID: A1-46607-111

Accuway UM130 with 4th axis: Tool changer: 32-speed Spindle nose to table: 150 - 700 mm Table size: 1500 x 650 mm T-slots: 5 x 18 x 100 mm Max. workpiece weight: 1500 kg Feed speed: X/Y/Z: 30 m/min Max. tool length: 300 Auction-ID: A1-46607-18

Table dimensions: 1500 x 1000 Table load: 2,500 kg Distance between table and spindle: 200-800 mm Tool Changer: 30 Tool Measurement: Blum Laser Chip conveyor electr. Handwheel Maximum height: 3550 mm Auction-ID: A1-46607-42

X-travel: 600mm, Y-way:450mm, Z-travel: 450mm; Machine Number: 14772; Table size approx. 800x460mm; Speed max. 10000 rpm, 30-fold tool changer, Tool holder: SK40; Max. table load: 1000kg; Control: Heiden-Hain: TNC430 ; incl. tool cabinet, equipped with tool holders and tools; incl. chip conveyor Auction-ID: A7-46619-280

Matra JET40H incl. 4th axle. Nikken Tool changer: 20 places Table size: 1200 x 500 mm without vice Auction-ID: A1-46607-30

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

Technical data Manufacturer: CHEVALIER Model: FALCON-2033VMC Machine Type: Vertical CNC Machining Center Table size: 1000 × 450 mm Max. table load: 500 kg Travel (X/Y/Z): 650 / 500 / 500 mm Spindle mount: #40 Speed range: 60 – 6000 rpm⁻¹ Spindle motor: 7.5 kW Rapid traverse: 15 / 15 / 12 m/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool changer: 20 places Max. tool weight: 7 kg Dimensions set-up: 2740 × 2508 × 2755 mm Machine weight: approx. 4500 kg Configuration Tool magazine: 20-fold carousel Coolant pump: integrated Compressed air requirement: 5 kg/cm², 200 l/min Power requirement: 15 kVA (optional 20 kVA) Auction-ID: A7-46432-10

REMA DP15 – Vertical Belt Sander General data: Manufacturer: Rema Model: DP15 Machine type: Vertical belt sander Configuration: Double-sided Description: Industrial vertical belt sanding machine designed for surface finishing, deburring, and grinding operations. The double-sided configuration allows efficient processing of workpieces from both sides, making it suitable for workshop and production environments. Auction-ID: A7-46498-33

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

General description Double-sided vertical belt grinder (linisher) manufactured by Frommia, designed for industrial grinding, deburring, and surface finishing of metal components. Robust construction with heavy cast base ensures high stability during operation. Technical details Manufacturer: Ferdinand Fromm GmbH & Co. Model: 805 BD Year: 1991 Serial number: 34/7 Voltage: 380 V Current: approx. 6.1 A Frequency: 50 Hz Belt width: approx. 200 mm Configuration: Double-sided with two vertical sanding belts (left & right) Drive: Integrated central motor Tables: Manual working tables on both sides Dust extraction: Connection available Equipment - Dual sanding stations - Integrated motor drive - Adjustable working tables - Dust extraction port Condition and remarks Used industrial machine made in West Germany. Nameplate available and confirms specifications. S ...

BROTHER TC-R2A – CNC Vertical Machining Center General data: Manufacturer: Brother Model: TC-R2A Machine number: 111291 Year of manufacture: 2002 Machine type: CNC vertical machining center Technical details: Axis travel (X / Y / Z): 420 / 320 / 450 mm Tool changer: 14-position automatic tool changer Pallet changer: yes Rotary table: CNC rotary table included Control system: CNC control: Brother Electronic handwheel: included Description: Compact CNC vertical machining center BROTHER TC-R2A designed for high-speed and precise machining operations. Equipped with automatic tool changer, pallet changer, and rotary table, the machine is suitable for efficient production and multi-axis processing in industrial environments. Auction-ID: A7-46498-40

Technical details Type: Industrial vertical storage tank Configuration: Cylindrical tank installed in concrete bunded containment pit Material: Carbon steel (painted, with surface oxidation) Capacity: Estimated 3000–6000 liters Installation: Fixed (integrated in floor containment system) Tank features: - Top manhole access - Vent line - Inlet/outlet piping connections - External level indicator scale (0–6000 range) Safety: Hazard signage for flammable liquids Application: Storage of fuel, oil, or industrial chemicals Condition: Used, with oxidation and industrial wear Dimensions and weight (approx.) Length: 2500 mm Width: 2500 mm Height: 5000 mm Weight: 2500 kg Auction-ID: A7-46498-186

BROTHER TC-215 – CNC Vertical Machining Center General data: Manufacturer: Brother Model: TC-215 Machine type: CNC vertical machining center Technical details: Spindle speed: 6000 – 10000 rpm Control system: CNC-400 Description: CNC vertical machining center BROTHER TC-215 designed for precision milling and machining operations. The machine provides reliable performance and a versatile spindle speed range, making it suitable for various industrial and workshop applications. Auction-ID: A7-46498-58