vertical band saw used for sale

Unaudited Auction-ID: A7-46327-219

Auction-ID: A1-41994-41

Key data: 300 mm

Radial saw Wigo Pull saw Saw blade diameter 300 mm Cutting height maximum 85 mm Cutting width maximum 650 mm Motor power 2.2 kW Sawing unit swivels by 0°- 90°- 0° or 180° overall Height-adjustable sawing unit Mounted on machine table Total dimensions 2800 mm x 1250 mm x H 1400 mm

Well preserved complete width frame - creel system LINCK type BV. Right-wing machine. Frame width 760 mm, stroke 600 mm, passage height max. 710 mm. Complete with log feeder, creel car with auxiliary car. Splitting wedge with roller conveyor, transverse take-off and model return. Creel with new saw clamps. Countershaft and frame including 132 kW motor with belt drive 310 1/min. Various spare parts can be purchased in a package. Dismantling on your own. Dismantling can be offered completely truck loaded.

Year of Make: 2016 Serial Number: 605001915 Power: 1600W Auction-ID: A1-46037-2980

Good condition Auction-ID: A7-46327-145

Wielopiła Brodpol WP 100 Circular saw blade diameter(max) 350mm Maximum spacing of extreme saws 320 mm Smallest cutting thickness 15mm Largest cutting thickness 100mm Maximum pile width 500mm Minimum pile length 550mm Feed speed adjustable on the inverter 26m/min 30kw main motor Net price

Key data: 46 °, 3000 mm, 1100 mm

MARTIN T73 Automatic Year 2002 Main sawing unit: 5.5 kW Rated current: 15 A 3 speeds (2,800 / 4,000 / 5,500 rpm) Swivel: 0 - 46° Sliding carriage length: 300 cm Electrical positioning of the rip fence: 1.10 m (CNC) Parallel fence can be lowered manually + suction arm can be moved max. saw blade diameter: min. 250 mm / max. 500 mm max. cutting height: 170 mm Height and swivel adjustment: electric motor Top control panel Central lubrication Fixed degree setting on the transverse table (grid) Pull-out support on the transverse table Compressed air supply required Extraction connection: 120 + 100 mm Weight: approx. 1950 kg

The STB TS350M aluminium/plastic sawing machine is in good condition and complete as shown in the photos. The machine is immediately ready for use. Equipped with a 350 mm saw blade, additional saw blade, pneumatic clamp and mist lubrication. Equipped with a tiltable head and miter options on both sides of 15°, 30° and 45°. The saw automatically clamps pneumatically when pulling the saw arm forward. Technically, optically and generally, the machine is in good condition and can therefore be used immediately. Auction-ID: A1-45170-34

Pick-up possible in the following period: 27.02.2025 from 09.00 to 16.00 Serial No.: 4317110005 Maximum file length: 230 mm Maximum lifting height: 120 mm File spindle speed range: Variable, with infinitely variable adjustment Drive power: Typically around 0.5 to 1.5 kW Power supply: 400 V, three-phase current Condition: unchecked Auction-ID: A7-46436-51

As good as new band saw stand EWD, 17° tiltable! Roller diameter 1800 mm. Absolutely as good as new, as it has only been in operation for a very short time. Year of manufacture 2010. 90 kW drive power, with adjustable belt guide. Includes hydraulic system.

74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-45902-359

Key data: 500 mm, 120 mm

Resawing saw – trimming saw MEM Cobra Year of construction approx. 1995, completely overhauled. Very good condition! Cutting height max. 120 mm, passage width max. 1070 mm. 4 axes variable. 2 x 55 KW drive power saws. Refurbished machine. Optionally, we can make a completely new Spreissel separator (see sep. Photo last page) and sawing axes positioning control (see photo) Plant immediately available for takeover!

74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-45902-360

Auction-ID: A1-41682-71

Key data: 270 mm

16 A plug Saw blade housing right. side replaced by steel plate. Length 0.8 m Width 0.65 m Height 1.40 m Weight 200 kg

CNC circular saw Type: KKS 451 CNC Manufacturer: Kaltenbach Year: 2014 CNC control + touchscreen PROFICUT Saw blade diameter: 450 mm Motor power: 1.8 / 2.7 kW Selectable power: 4.0 or 5.5 kW Cutting speeds: 10/20 – 13/26 – 15/30 m/min Selectable regulation: 7–43 or 15–75 m/min Saw feed: 0–1000 mm/min Rapid return feed: 3500 mm/min Single material feed: 10–2000 mm Multiple feed up to 9999 mm Max. round material: 150 mm Max. square: 140 mm Max. flat material: 240 × 80 mm Angling range: ±60° Rotating range: 120° Tool type: HSS discs Table magazine for up to 6 meters of material Machine weight: 2500 kg Dimensions: 3300 × 1420 × 2100 mm Machine in good condition, fully functional, under power Find more here - / Contact us at -

Sizing saw Brand Panhans Type: 680 / 200 New machine Basic construction - Solid German machine construction - approx. 1150 kg - Machine body manufactured as a stable welded frame construction from strong-walled steel profiles. - The torsion-resistant and finely planed cast iron table top is mounted on the machine body. - The robust and powerful sawing unit built into the machine body is the guarantor for precise saw cuts. - The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment as well as the circular saw shaft with 2 ball bearings ensure absolutely smooth running. Supports and stops - The ball bearing-mounted double roller carriage is smooth-running and maintenance-free. Precise and clearance-free running over the full length, guided with hardened and ground prismatic guides ...

Crosscut saw for miter cuts Brand: SALVADOR Type: Superangle 600 New machine High performance crosscut saw with rotary table for miter cuts -70° / + 70°. Max. Saw blade diameter 600 mm Saw cross section at straight cut: 30 x 100 mm resp. 310 x 160 mm Saw cross section at 45°: 260 x 100 mm resp. 220 x 160 mm Saw cross section at 70°: 120 x 100 mm resp. 100 x 160 mm Rotary table guided on precision bearings Optical system with laser light barrier for detection of the wood length and Luminescence reader to detect the markings. No manual adjustments for wood thickness Powerful Windows software for easy and safe operation

Sliding table saw Brand: Panhans Type: 680 100 New machine Technical data: Trolley length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90 ° 105 mm at 46 ° Cut width Width stop 1030 mm Saw blade max. Ø 450 mm Saw blade under table retractable Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus. 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000/4000/5000/6000 rpm Net weight approx. 1051 kg Technical description: Solid German mechanical engineering For trimming, cutting to length, formatting, miter cutting, etc. Dimensionally stable and self-supporting machine body manufactured as a stable frame welded construction from thick-walled steel profiles, laser-processed sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is built on the  ...

CONTROLS   NC controls SIEMENS S7 TECHNICAL SPECIFICATION   max. diameter of saw blade: 460 mm   cutting capacity round: 146 mm   cutting capacity square: 138 mm   mitre cutting: no   .. oblong: 250 mm   .. .. x: 100 mm   .. to: 220 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 1950 mm   total height: 2000 mm   total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-61

Cabinet left of saw 4130x330x910 saw 810x1200x1400 right cabinet 2000x340x910 Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-4

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-39

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-62

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-54

KASTO PKS 140 — Datasheet Feature Value Blade diameter Ø425 mm (HSS) Cut (round) Ø10–140 mm Cut (square) 10×10 →125×125 mm Cutting (flat B×H) 140×125 mm Max Depth (HSS) ~300 mm Feed rate 16–600 mm/min (programmable) Inlet speed 5000 mm/min Blade motor HSS 10.0 kW / HM 29.0 kW HSS cutting speed 6–70 m/min · HM 80–150 m/min Max. tightening Princ. 2200 daN · Advance 1400 daN Hydraulics 3 kW Cooling pump. 25 l/min · 0.1 kW Bearing height 950 mm Precision power supply ±0.05 mm/300 mm Conveyor length: 5400 mm. Safety light bar included. Auction-ID: A1-46437-1238

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-42

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

CNC Bar Machining Center for Aluminum, Machine No. 6100013187, control Beckhoff C6140 renewed in 2020, infeed of extrusion profile magazine length max. approx. 6000 mm, machining units (drilling / milling: vertical top 1 piece / vertical bottom 4 pieces / horizontal front 1 piece / horizontal rear 1 piece) and (sawing 3 pieces: 45 / 90 / 45 degrees), outfeed belt max. approx. 2700 mm, chip conveyor belt (The article is in condition as existing and unchecked. The article is sold from the foundation and without content/material! For the dismantling and loading of the item, there are no pallets, other packaging material available on site and the buyer must rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary! Mediation of dismantling and loading possible. Contact: Dejan Ducic / dejan.ducic@surplex.com

Pressing force: approx. 8 tons Connection value: 230 V 1.5 kW Filling shaft: 630x460x750 mm Bale size: 630x460x700 mm Bale weight: approx. 30 - 80 kg Machine size 830x970x1870 mm WxDxH Machine weight: 360 kg Warranty: 12 months Condition: technically and optically revised Completely overhauled with new paint!

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500

Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time

Table clamping surface: 2 x 350 x 300 mm traverse path x/y/z: 700/300/250 mm spindle retainer: BT 30 ISA kl. / gr. Table/spindle distance: 450 mm spindle speeds: 6-6000 rpm number of tool stations: 10 pieces feeds: 5-10000 mm / min rapid traverse: x & y/z 25/20 m / min spindle drive: 3,1/4,1 kW Electr. Supply: 400 V kW weight: 2600 kg

Campagnolo Packaging Systems Vertical form and seal machine Model: C25 Serial:A02-02

Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm

I am offering them a complete vertical packaging plant. Multihead weigher by Ishida Vertical flow of Hassia Redatron and Bosch Bosch cartoning machine If you are interested, please contact me.

Vertical pallet transport

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

Grenzebach HGB new device, 1a State ca 300 BH Uea dimensions: 590h x 170 x 190 d cm Weight ca. 1.8 t 78 cm with toothed belt conveyor Rail length 500 cm from the ground 26 cm

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

Tractive effort: to 25 Length: 2000 mm Room set: 3 piece

Table size: 700 x 1200 mm traverse path x/y/z: 600/300/350 mm spindle retainer: SK 40 ISA kl. / gr. Table/spindle distance: 150/540 mm spindle speeds: 45-6000 rpm number of tool stations: 12 pieces feeds: 5000-20000 mm / min rapid traverse rate: 5000-20000 m / min spindle drive: 5.5 kW Electr. Supply: 380 V, 12 kVA kW space: 2350 x 2100 x 2500 mm weight: 3800 kg

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...

P57 - used appr. 3 m³ / 3,000 litres polyester tank / GRP tank, Staffelstein tank, aboveground, vertically standing, good condition. capacity: appr. 3 m³ / 3,000 litres material: polyester / GRP height: 2.40 m width: 1.04 m length: approximately 1.60 m (with lid 1.80 m) Aboveground, vertically standing tank, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as rain collection tank etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write ...