136,418 used machines on RESALE, but how to find them? Machine Search
Optimizing Cross-Cut Saw manufactured in 2008. This OMGA T 2010 NC features a maximum piece thickness of 105 mm and a maximum piece width of 254 mm. It offers a maximum feed speed of 120 m/min and an average number of cuts of 50–60 per minute. If you are looking to get high-quality cutting capabilities, consider the OMGA T 2010 NC machine we have for sale. Contact us for further details.
A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible.
Manufacturer: BIZERBA Type: FK 23 Band Saw BIZERBA Type FK 23 Cutting and portioning of fresh meat with or without bone as well as cutting of long bones, poultry and fish Cutting height 251 mm Cutting thickness 10-190 mm Saw blade speed 17 m/sec Dustbin System for clamping and releasing the saw blade Height-adjustable saw table Protection class IP 55 Voltage 400 V 50 Hz Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60
Key data: 45 °, 3500 mm, 1350 mm
Basic Cutting length 3500 mm Cast iron sawing unit type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min 8D9Kjux2Mt Cutting width between saw blade and Z4 rip fence 1350 mm Z5 Cross Table (1505x760 mm) with Telescopic with Z5 Mitre Stop with 2 Folding Stops Comfort Pack on Cross Table with Extendable Workpiece Roll Frame table with extendable support and degree grid index system with length compensation Motorized height adjustment and inclined position of the saw blade incl. special accessories: Motor 9.2 kW Start/stop in the sliding table
used
Offer 24455 Specifications: - Saw feed via hand lever - Saw blade diameter 315 mm - Largest opening width vice approx. 160 mm - Cutting range approx. at 90° around 100 mm - Flat up to 135 x 80 mm - Cutting range Li + RE at 45° around 108 mm - Flat up to 100 x 80 mm - Cutting range Li at 60° around 80 mm - Flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg
Key data: 45 °, 2800 mm, 1000 mm
Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable by pneumatic connection high and lowerable Trimming length 2800 mm Speeds: 600/5000/4000/3000 rpm via V-belts Electric swivel with digital display Electric height adjustment with digital display Cutting width 1000 mm 23S9Fmzq rear support table 950 x 400 mm wide Angle stop 2500 mm with extension 2840 mm with 2 stops Suction port 120mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Edging stop
Key data: 45 °, 2150 mm, 1100 mm
Connected load 380V 6.1A 3.8kW Saw blade diameter max. 315 mm Weight approx. 330 kg Length of trimming carriage 2150 mm Speed 4000 rpm Suction nozzle 100 mm Cutting width 1100 mm Angle stop Rip fence
Max. saw blade diameter: 500 mm Infinitely adjustable hydropneumatic saw blade feed Pneumatic material tensioners Weight: approx. 450 kg
Includes 6 new bandsaw blades. Viewing by appointment. Auction-ID: A1-40324-171
Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed
Oscillation: ja ja / nein : ja ja/nein : ja ja/nein tiltable up to: 45/90 Grad Motor output: 3 kW Table dimensions: 750x350 mm sanding width: 150 mm Weight: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cross-cut line Opticut 150 -4 4 ejections built in 2004
Log band saw Canali Braun 1600 round timber feed wagon saw roller conveyor year of construction.1994 new control
Complete plant Bogli 1600 round timber feed saw wagon roller conveyor shearer
Trennsäge - Splitting Saw Metris MT 817 Year 2003 - Serial-No. 020520P Complete clean and Check Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Offered for sale is a metal-cutting circular saw with a manual clamping system. The machine features a pivoting saw head and a material clamping area with a mechanical clamping device. Equipped with a separate control panel, main switch, emergency stop button, analog indicators and machine stand with integrated storage cabinet. Inspection possible by arrangement.
dimensions of saw-blade: 350x32x4 mm vice: 180 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 2,2 kw weight: 225 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CUTTING RANGE . MIN 10MM TO 75MM CUTTING LENGTH . 5-900 SINGLE STROKE -9999 REVERSE CUTTING SPEED. 0 - 40 MM SEC. INFINITELY ADJUSTABLE BACKWARDS 135MM/S MATERIAL FEED SPEED . MAX. 350 MM/S Pwrxaerqe RESILIENCE. MAIN CLAMP 10500N
Panel sizing saw with lift table loading HOLZMA type OPTIMAT HPL 380/43/22/L Specifications: • Saw blade protrusion (mm): 95 • Saw carriage feed forward (m/min.): 5 - 130 • Saw carriage feed backwards constant (m/min.): 130 • Program slider speed forward (m/min.): 80 • Reverse program slide speed (m/min.): 80 • In EU countries, a maximum forward speed of 25 m/min is prescribed. • Angular pressure device min. pressure width (mm): 0 • Angular pressure device max. pressure width: complete cutting length • Main saw motor (kW): 13.5 • Scoring saw motor (kW): 2.2 • Collet opening max. (mm): 100 • Working height (mm): 920 • Cutting length (mm): 4300 • Collets: 7 pieces, of which the first 3 pieces are two-fingered, all others are single-fingered • Pitch: 75/275/475/1050/1850/2650/3450 mm measured from angle ruler to center collet Lift table: ...
For sale is this hydraulic under-sink miter saw with two conveyor belts. Saw table dimensions L 800 mm x W 900 mm x H 800 mm. Conveyor belt behind the saw 1500 x 700 mm, conveyor belt in front of the saw 2500 x 700 mm, distance from the beginning of the belt to the saw 3300 mm, saw blade diameter 500 mm, max. cutting height 120mm, motor approx. 5.5 kW. The saw was completely repaired.
Key data: 550 mm
Five Axis CNC Controlled Dual Head Double Miter Circular Sawing Machine with Loading and Unloading Device Maximum section length with two saw heads at the same time - 6,000 mm Maximum saw blade diameter Ø 550 mm Infinitely programmable mitre angle adjustment - 15° / 90° / + 45° Saw blade drive power 2 x 2.64 kW Dimensions approx. 11.3 m x 2 m x H 2 m (with closed safety doors)
Key data: 4300 mm, 2200 mm
EXHIBITION MACHINE Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cut, infinitely variable from 6-25 m/min. incl. the following accessories: - Suction CE - Pneumatic aluminium sliding shelf - Medium workpiece support - Longitudinal fence with digital dimension display - Stripe stop - Digital dimension display for horizontal cutting on the control panel - 3 adjustable anchorage points in the saw bar - SuperCut scoring device incl. 2 WPL knives - Narrow parts line (2 pieces)
Key data: 45 °, 3200 mm, 1500 mm
Connected load 380V Main motor 7.5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram protection device with wide and narrow hood Scoring unit manual adjustment Electric height adjustment Electric swivel with Siko indicator Extraction connection 1x100mm 1x120mm
Key data: 45 °, 3200 mm, 1200 mm
Connected load 380V 15.8A Saw motor 5.5kW Scoring motor 1.2kW Electric height adjustment Electric swivel with LED display Length of trimming carriage 3000 mm Cutting width 1200 mm PSV with narrow hood Table extension 1000 x 470 mm Scoring pneumatically height-adjustable
Connected load 380V 6.6A 3kW Cutting height approx. 440mm Cutting width approx. 650 mm Band saw length 5110 mm Attack Suction 100 mm Machine table swivel with handwheel Foot brake
Connected load 380V 2.2kW Cutting height 300 mm Cutting width 570 mm Suction 120 mm Band saw guide at the top and bottom Attack Total height of the machine approx. 2100 mm
Key data: 5300 mm, 2100 mm
Power sawing unit 4.6 kW Cutting length 5300 mm Cutting height 2100 mm Cutting depth 80 mm Total machine height 2900 mm Strip attack Weight approx. 700 kg Saw blade Ø 300 mm Hinged rail
Key data: 45 °, 1600 mm, 1000 mm
Connected load 380V 10A Motor power 4kW Edging table length 1600 mm Saw Blade-D. 315 mm Cutting height 90 mm Extraction 1x120mm 1x60mm (on extraction hood) Cutting width 1000 mm Table extension 400x400mm Rip fence with fine adjustment Edging frame with angle mitre stop Manual lifting and swivelling of the saw blade Saw blade tilt indicator 1x switch for direct starting of the main engine Saw blade protection cover
ZIM Hülsta Rear Wall Saw Make: ZIM Hülsta-Werke Description: Backwall saw Year of Make: 2014 Serial Number: 380114008 Description: 2 movable Benz saw/drill units Feed roller table Protective enclosure with Leutze laser barrier system Switchboard Extraction piping Control terminal, consisting of: PC, flat screen EIZO FlexScan S1911 Keyboard and mouse, handheld scanner, terminal cabinet Mobile steel skip (beige) More items - new and used - can be found in our shop! International shipping costs on request!
Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device
Cutting depth:70 mm engine output:12.4 A, 220/380 V , 2 x 6 kW working length:2500 mm dimensions of the machine ca.:3900 x 1100 x 1000 mm weight:1500 kg
Circular Saw Blade Sharpening Machine Vollmer Type CNS Suitable for CV circular saw blades for straight and bevel grinding Grinding wheel diameter maximum 150 mm Saw blade diameter 90 – 600 mm Sharpening speed 3 speeds 30/60/80 teeth per minute Drive warping disc motor power 0.2 kW Drive Feed 0.4 kW Dimensions 800 mm x 900 mm x H 1800 mm Weight approx. 250 kg
saw blade diameter:400 mm total power requirement:380 V, 1,7/2,6 kW weight of the machine ca.:850 kg dimensions of the machine ca.:1100 x 1050 x 1620 mm
saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m
Specifications: - Saw blade dimensions 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - Cutting range at 90° around 80 mm - flat 95 x 60 mm - Mitre adjustable up to 45 ° - Material vise - Drive 400 V / 0.5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg
Saw blade metal WIKUS Biflex 2ZpZ clawtooth Dimensions: 8128 x 50 x 1.30 mm
Circular saw motor, electric motor with brake PERSKE Type: KS 80.12-2 BR ( KS80.2 12-2BR ) 4.4 kW 2830 rpm 400 V IP 54 Shaft diameter: Ø 30 / 60 mm Disc diameter: Ø 160 mm Flange diameter: Ø 215 mm Matching saw blade WZ252 ! used, tested ! Dimensions: 465 x 330 x 260 mm
Saw Blade Sharpening Machine VOLLMER CV 1 year: 1956 height with pulley: 2900 mm motor: 0.55 kW with extraction 0.2 kW voltage: 220/ 380 V ( built-in socket without function ) used, tested ! Dimensions: 800 x 900 x 1600 mm
maximum number of results exceeded
please refine your search
25 € 
